[v4] net/i40e: rework maximum frame size configuration

  This patch reverts mentionned changes below to remove unnecessary link
status check and only moves max frame size configuration to dev_start.
Also, it sets the parameter "wait to complete" true to wait for complete
right after setting link up.

Fixes: a4ba77367923 ("net/i40e: enable maximum frame size at port level")
Fixes: 2184f7cdeeaa ("net/i40e: fix max frame size config at port level")
Fixes: 719469f13b11 ("net/i40e: fix jumbo frame Rx with X722")
Cc: stable@dpdk.org

Signed-off-by: Simei Su <simei.su@intel.com>
---
v4:
* Refine commit log.
* Avoid duplicate call to set parameter "wait to complete" true.

v3:
* Put link update before interrupt enable.

v2:
* Refine commit log.
* Add link update.

 drivers/net/i40e/i40e_ethdev.c | 54 ++++++++++--------------------------------
 1 file changed, 13 insertions(+), 41 deletions(-)
  

On 02/02/2023 12:30, Simei Su wrote:
> This patch reverts mentionned changes below to remove unnecessary link
> status check and only moves max frame size configuration to dev_start.
> Also, it sets the parameter "wait to complete" true to wait for complete
> right after setting link up.
> 

I think it would be better for fixes tracking and stable branches to put 
reverts into a single or multiple patches in a series. Then put whatever 
new functionality or new fix for the code prior to these patches that 
are being reverted into a separate patch.

Otherwise fixes for this new functionality will be seen as a fix for 
patches that were reverted etc.

Also, for 21.11 I have already reverted these patches, so I won't be 
able to take a combined revert/new fixes patch without manual editing or 
getting a 21.11 branch rebased patch.

> Fixes: a4ba77367923 ("net/i40e: enable maximum frame size at port level")
> Fixes: 2184f7cdeeaa ("net/i40e: fix max frame size config at port level")
> Fixes: 719469f13b11 ("net/i40e: fix jumbo frame Rx with X722")
> Cc: stable@dpdk.org
> 
> Signed-off-by: Simei Su <simei.su@intel.com>
> ---
> v4:
> * Refine commit log.
> * Avoid duplicate call to set parameter "wait to complete" true.
> 
> v3:
> * Put link update before interrupt enable.
> 
> v2:
> * Refine commit log.
> * Add link update.
> 
>   drivers/net/i40e/i40e_ethdev.c | 54 ++++++++++--------------------------------
>   1 file changed, 13 insertions(+), 41 deletions(-)
> 
> diff --git a/drivers/net/i40e/i40e_ethdev.c b/drivers/net/i40e/i40e_ethdev.c
> index 7726a89d..5d57bb9 100644
> --- a/drivers/net/i40e/i40e_ethdev.c
> +++ b/drivers/net/i40e/i40e_ethdev.c
> @@ -387,7 +387,6 @@ static int i40e_set_default_mac_addr(struct rte_eth_dev *dev,
>   				      struct rte_ether_addr *mac_addr);
>   
>   static int i40e_dev_mtu_set(struct rte_eth_dev *dev, uint16_t mtu);
> -static void i40e_set_mac_max_frame(struct rte_eth_dev *dev, uint16_t size);
>   
>   static int i40e_ethertype_filter_convert(
>   	const struct rte_eth_ethertype_filter *input,
> @@ -2449,7 +2448,7 @@ i40e_dev_start(struct rte_eth_dev *dev)
>   			PMD_DRV_LOG(WARNING, "Fail to set phy mask");
>   
>   		/* Call get_link_info aq command to enable/disable LSE */
> -		i40e_dev_link_update(dev, 0);
> +		i40e_dev_link_update(dev, 1);
>   	}
>   
>   	if (dev->data->dev_conf.intr_conf.rxq == 0) {
> @@ -2467,8 +2466,16 @@ i40e_dev_start(struct rte_eth_dev *dev)
>   			    "please call hierarchy_commit() "
>   			    "before starting the port");
>   
> -	max_frame_size = dev->data->mtu + I40E_ETH_OVERHEAD;
> -	i40e_set_mac_max_frame(dev, max_frame_size);
> +	max_frame_size = dev->data->mtu ?
> +		dev->data->mtu + I40E_ETH_OVERHEAD :
> +		I40E_FRAME_SIZE_MAX;
> +
> +	/* Set the max frame size to HW*/
> +	ret = i40e_aq_set_mac_config(hw, max_frame_size, TRUE, false, 0, NULL);
> +	if (ret) {
> +		PMD_DRV_LOG(ERR, "Fail to set mac config");
> +		return ret;
> +	}
>   
>   	return I40E_SUCCESS;
>   
> @@ -2809,9 +2816,6 @@ i40e_dev_set_link_down(struct rte_eth_dev *dev)
>   	return i40e_phy_conf_link(hw, abilities, speed, false);
>   }
>   
> -#define CHECK_INTERVAL             100  /* 100ms */
> -#define MAX_REPEAT_TIME            10  /* 1s (10 * 100ms) in total */
> -
>   static __rte_always_inline void
>   update_link_reg(struct i40e_hw *hw, struct rte_eth_link *link)
>   {
> @@ -2878,6 +2882,8 @@ static __rte_always_inline void
>   update_link_aq(struct i40e_hw *hw, struct rte_eth_link *link,
>   	bool enable_lse, int wait_to_complete)
>   {
> +#define CHECK_INTERVAL             100  /* 100ms */
> +#define MAX_REPEAT_TIME            10  /* 1s (10 * 100ms) in total */
>   	uint32_t rep_cnt = MAX_REPEAT_TIME;
>   	struct i40e_link_status link_status;
>   	int status;
> @@ -12123,40 +12129,6 @@ i40e_cloud_filter_qinq_create(struct i40e_pf *pf)
>   	return ret;
>   }
>   
> -static void
> -i40e_set_mac_max_frame(struct rte_eth_dev *dev, uint16_t size)
> -{
> -	struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
> -	uint32_t rep_cnt = MAX_REPEAT_TIME;
> -	struct rte_eth_link link;
> -	enum i40e_status_code status;
> -	bool can_be_set = true;
> -
> -	/*
> -	 * I40E_MEDIA_TYPE_BASET link up can be ignored
> -	 * I40E_MEDIA_TYPE_BASET link down that hw->phy.media_type
> -	 * is I40E_MEDIA_TYPE_UNKNOWN
> -	 */
> -	if (hw->phy.media_type != I40E_MEDIA_TYPE_BASET &&
> -	    hw->phy.media_type != I40E_MEDIA_TYPE_UNKNOWN) {
> -		do {
> -			update_link_reg(hw, &link);
> -			if (link.link_status)
> -				break;
> -			rte_delay_ms(CHECK_INTERVAL);
> -		} while (--rep_cnt);
> -		can_be_set = !!link.link_status;
> -	}
> -
> -	if (can_be_set) {
> -		status = i40e_aq_set_mac_config(hw, size, TRUE, 0, false, NULL);
> -		if (status != I40E_SUCCESS)
> -			PMD_DRV_LOG(ERR, "Failed to set max frame size at port level");
> -	} else {
> -		PMD_DRV_LOG(ERR, "Set max frame size at port level not applicable on link down");
> -	}
> -}
> -
>   RTE_LOG_REGISTER_SUFFIX(i40e_logtype_init, init, NOTICE);
>   RTE_LOG_REGISTER_SUFFIX(i40e_logtype_driver, driver, NOTICE);
>   #ifdef RTE_ETHDEV_DEBUG_RX