net/ixgbe: fix configuration of max frame size
Checks
Commit Message
From: Alvin Zhang <alvinx.zhang@intel.com>
For 82599 NIC, jumbo frame feature is not supported in IOV mode,
but if a VF requests to configure the frame size to that not
bigger than RTE_ETHER_MAX_LEN, the PMD should not return -1.
This patch keeps ixgbe PMD's handling mode consistent with kernel
driver in above situation.
In addition, the value set by the command IXGBE_VF_SET_LPE
represents the max frame size, not the mtu.
Fixes: 1b9ea09c067b ("ixgbe: support X550")
Fixes: 95a27b3ba5f5 ("net/ixgbe: enable jumbo frame for VF")
Cc: stable@dpdk.org
Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
---
drivers/net/ixgbe/ixgbe_pf.c | 25 ++++++++++++++-----------
1 file changed, 14 insertions(+), 11 deletions(-)
@@ -555,27 +555,30 @@ int ixgbe_pf_host_configure(struct rte_eth_dev *eth_dev)
ixgbe_set_vf_lpe(struct rte_eth_dev *dev, __rte_unused uint32_t vf, uint32_t *msgbuf)
{
struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
- uint32_t new_mtu = msgbuf[1];
- uint32_t max_frs;
+ uint32_t max_frame = msgbuf[1];
+ uint32_t cur_frame_size;
uint32_t hlreg0;
- int max_frame = new_mtu + RTE_ETHER_HDR_LEN + RTE_ETHER_CRC_LEN;
/* X540 and X550 support jumbo frames in IOV mode */
if (hw->mac.type != ixgbe_mac_X540 &&
hw->mac.type != ixgbe_mac_X550 &&
hw->mac.type != ixgbe_mac_X550EM_x &&
- hw->mac.type != ixgbe_mac_X550EM_a)
- return -1;
+ hw->mac.type != ixgbe_mac_X550EM_a) {
+ if (max_frame > RTE_ETHER_MAX_LEN)
+ return -1;
+
+ return 0;
+ }
if (max_frame < RTE_ETHER_MIN_LEN ||
max_frame > RTE_ETHER_MAX_JUMBO_FRAME_LEN)
return -1;
- max_frs = (IXGBE_READ_REG(hw, IXGBE_MAXFRS) &
- IXGBE_MHADD_MFS_MASK) >> IXGBE_MHADD_MFS_SHIFT;
- if (max_frs < new_mtu) {
+ cur_frame_size = (IXGBE_READ_REG(hw, IXGBE_MAXFRS) &
+ IXGBE_MHADD_MFS_MASK) >> IXGBE_MHADD_MFS_SHIFT;
+ if (cur_frame_size < max_frame) {
hlreg0 = IXGBE_READ_REG(hw, IXGBE_HLREG0);
- if (new_mtu > RTE_ETHER_MAX_LEN) {
+ if (max_frame > RTE_ETHER_MAX_LEN) {
dev->data->dev_conf.rxmode.offloads |=
DEV_RX_OFFLOAD_JUMBO_FRAME;
hlreg0 |= IXGBE_HLREG0_JUMBOEN;
@@ -586,8 +589,8 @@ int ixgbe_pf_host_configure(struct rte_eth_dev *eth_dev)
}
IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0);
- max_frs = new_mtu << IXGBE_MHADD_MFS_SHIFT;
- IXGBE_WRITE_REG(hw, IXGBE_MAXFRS, max_frs);
+ IXGBE_WRITE_REG(hw, IXGBE_MAXFRS,
+ max_frame << IXGBE_MHADD_MFS_SHIFT);
}
return 0;