[v2] net/mlx5: disable ConnectX-4 Lx Multi Packet Send by default
Checks
Commit Message
On ConnectX-4 Lx the Multi Packet Send (MPW) feature is considered
un-secure, as on some cases were the application provides incorrect mbufs
on the Tx burst the host or NIC can get stuck.
Hence, disabling the feature by default for this specific NIC.
Users can still enable this feature and enjoy the performance gain
(mostly for low number of cores) by using the txq_mpw_en devarg.
This patch will impact the out of the box performance of some application
using ConnectX-4 Lx for the sack of security and robustness.
Since we need different defaults based on the underlying device the mpw
field in the configuration struct was extended to contain also the
MLX5_ARG_UNSET option.
Cc: stable@dpdk.org
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
---
doc/guides/nics/mlx5.rst | 7 ++++++-
drivers/net/mlx5/mlx5.c | 20 +++++++++++---------
drivers/net/mlx5/mlx5.h | 2 +-
3 files changed, 18 insertions(+), 11 deletions(-)
Comments
> On Aug 15, 2018, at 5:17 AM, Shahaf Shuler <shahafs@mellanox.com> wrote:
>
> On ConnectX-4 Lx the Multi Packet Send (MPW) feature is considered
> un-secure, as on some cases were the application provides incorrect mbufs
> on the Tx burst the host or NIC can get stuck.
>
> Hence, disabling the feature by default for this specific NIC.
> Users can still enable this feature and enjoy the performance gain
> (mostly for low number of cores) by using the txq_mpw_en devarg.
>
> This patch will impact the out of the box performance of some application
> using ConnectX-4 Lx for the sack of security and robustness.
>
> Since we need different defaults based on the underlying device the mpw
> field in the configuration struct was extended to contain also the
> MLX5_ARG_UNSET option.
>
> Cc: stable@dpdk.org
>
> Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
> ---
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Thanks
Wednesday, August 15, 2018 8:12 PM, Yongseok Koh:
> Subject: Re: [PATCH v2] net/mlx5: disable ConnectX-4 Lx Multi Packet Send
> by default
>
>
> > On Aug 15, 2018, at 5:17 AM, Shahaf Shuler <shahafs@mellanox.com>
> wrote:
> >
> > On ConnectX-4 Lx the Multi Packet Send (MPW) feature is considered
> > un-secure, as on some cases were the application provides incorrect
> > mbufs on the Tx burst the host or NIC can get stuck.
> >
> > Hence, disabling the feature by default for this specific NIC.
> > Users can still enable this feature and enjoy the performance gain
> > (mostly for low number of cores) by using the txq_mpw_en devarg.
> >
> > This patch will impact the out of the box performance of some
> > application using ConnectX-4 Lx for the sack of security and robustness.
> >
> > Since we need different defaults based on the underlying device the
> > mpw field in the configuration struct was extended to contain also the
> > MLX5_ARG_UNSET option.
> >
> > Cc: stable@dpdk.org
> >
> > Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
> > ---
>
> Acked-by: Yongseok Koh <yskoh@mellanox.com>
Applied to next-net-mlx, thanks.
>
> Thanks
@@ -339,7 +339,12 @@ Run-time configuration
When those offloads are requested the MPS send function will not be used.
It is currently only supported on the ConnectX-4 Lx, ConnectX-5 and Bluefield
- families of adapters. Enabled by default.
+ families of adapters.
+ On ConnectX-4 Lx the MPW is considered un-secure hence disabled by default.
+ Users which enable the MPW should be aware that application which provides incorrect
+ mbuf descriptors in the Tx burst can lead to serious errors in the host including, on some cases,
+ NIC to get stuck.
+ On ConnectX-5 and Bluefield the MPW is secure and enabled by default.
- ``txq_mpw_hdr_dseg_en`` parameter [int]
@@ -477,7 +477,7 @@ mlx5_args_check(const char *key, const char *val, void *opaque)
} else if (strcmp(MLX5_TXQS_MIN_INLINE, key) == 0) {
config->txqs_inline = tmp;
} else if (strcmp(MLX5_TXQ_MPW_EN, key) == 0) {
- config->mps = !!tmp ? config->mps : 0;
+ config->mps = !!tmp;
} else if (strcmp(MLX5_TXQ_MPW_HDR_DSEG_EN, key) == 0) {
config->mpw_hdr_dseg = !!tmp;
} else if (strcmp(MLX5_TXQ_MAX_INLINE_LEN, key) == 0) {
@@ -702,6 +702,7 @@ mlx5_dev_spawn(struct rte_device *dpdk_dev,
struct mlx5dv_context dv_attr = { .comp_mask = 0 };
struct mlx5_dev_config config = {
.vf = !!vf,
+ .mps = MLX5_ARG_UNSET,
.tx_vec_en = 1,
.rx_vec_en = 1,
.mpw_hdr_dseg = 0,
@@ -791,7 +792,6 @@ mlx5_dev_spawn(struct rte_device *dpdk_dev,
DRV_LOG(DEBUG, "MPW isn't supported");
mps = MLX5_MPW_DISABLED;
}
- config.mps = mps;
#ifdef HAVE_IBV_MLX5_MOD_SWP
if (dv_attr.comp_mask & MLX5DV_CONTEXT_MASK_SWP)
swp = dv_attr.sw_parsing_caps.sw_parsing_offloads;
@@ -1035,13 +1035,15 @@ mlx5_dev_spawn(struct rte_device *dpdk_dev,
(1 << IBV_QPT_RAW_PACKET)));
if (config.tso)
config.tso_max_payload_sz = attr.tso_caps.max_tso;
- if (config.mps && !mps) {
- DRV_LOG(ERR,
- "multi-packet send not supported on this device"
- " (" MLX5_TXQ_MPW_EN ")");
- err = ENOTSUP;
- goto error;
- }
+ /*
+ * MPW is disabled by default, while the Enhanced MPW is enabled
+ * by default.
+ */
+ if (config.mps == MLX5_ARG_UNSET)
+ config.mps = (mps == MLX5_MPW_ENHANCED) ? MLX5_MPW_ENHANCED :
+ MLX5_MPW_DISABLED;
+ else
+ config.mps = config.mps ? mps : MLX5_MPW_DISABLED;
DRV_LOG(INFO, "%sMPS is %s",
config.mps == MLX5_MPW_ENHANCED ? "enhanced " : "",
config.mps != MLX5_MPW_DISABLED ? "enabled" : "disabled");
@@ -99,7 +99,6 @@ struct mlx5_dev_config {
unsigned int hw_fcs_strip:1; /* FCS stripping is supported. */
unsigned int hw_padding:1; /* End alignment padding is supported. */
unsigned int vf:1; /* This is a VF. */
- unsigned int mps:2; /* Multi-packet send supported mode. */
unsigned int tunnel_en:1;
/* Whether tunnel stateless offloads are supported. */
unsigned int mpls_en:1; /* MPLS over GRE/UDP is enabled. */
@@ -122,6 +121,7 @@ struct mlx5_dev_config {
unsigned int min_rxqs_num;
/* Rx queue count threshold to enable MPRQ. */
} mprq; /* Configurations for Multi-Packet RQ. */
+ int mps; /* Multi-packet send supported mode. */
unsigned int flow_prio; /* Number of flow priorities. */
unsigned int tso_max_payload_sz; /* Maximum TCP payload for TSO. */
unsigned int ind_table_max_size; /* Maximum indirection table size. */