[v3] app/testpmd: add hairpin support

Message ID 1572980719-144308-1-git-send-email-orika@mellanox.com (mailing list archive)
State Accepted, archived
Delegated to: Ferruh Yigit
Headers
Series [v3] app/testpmd: add hairpin support |

Checks

Context Check Description
ci/checkpatch success coding style OK
ci/Performance-Testing fail build patch failure
ci/Intel-compilation fail Compilation issues
ci/travis-robot warning Travis build: failed

Commit Message

Ori Kam Nov. 5, 2019, 7:05 p.m. UTC
This commit introduce the hairpin queues to the testpmd.
the hairpin queue is configured using --hairpinq=<n>
the hairpin queue adds n queue objects for both the total number
of TX queues and RX queues.
The connection between the queues are 1 to 1, first Rx hairpin queue
will be connected to the first Tx hairpin queue

Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
---
v3: fix checkpatch warnings.

v2: send the updated patch.

This patch was part of the hairpin series. [1]
in this version, the configuration of the hairpin was moved to external function,
and the documentation was updated.

[1] https://mails.dpdk.org/archives/dev/2019-October/149590.html
---
 app/test-pmd/parameters.c             |  28 ++++++++
 app/test-pmd/testpmd.c                | 120 +++++++++++++++++++++++++++++++++-
 app/test-pmd/testpmd.h                |   3 +
 doc/guides/testpmd_app_ug/run_app.rst |  11 ++++
 4 files changed, 160 insertions(+), 2 deletions(-)
  

Comments

Ferruh Yigit Nov. 8, 2019, 1:43 p.m. UTC | #1
On 11/5/2019 7:05 PM, Ori Kam wrote:
> This commit introduce the hairpin queues to the testpmd.
> the hairpin queue is configured using --hairpinq=<n>
> the hairpin queue adds n queue objects for both the total number
> of TX queues and RX queues.
> The connection between the queues are 1 to 1, first Rx hairpin queue
> will be connected to the first Tx hairpin queue
> 
> Signed-off-by: Ori Kam <orika@mellanox.com>
> Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>

Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

Applied to dpdk-next-net/master, thanks.
  

Patch

diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c
index 9ea87c1..9b6e35b 100644
--- a/app/test-pmd/parameters.c
+++ b/app/test-pmd/parameters.c
@@ -149,6 +149,8 @@ 
 	printf("  --rxd=N: set the number of descriptors in RX rings to N.\n");
 	printf("  --txq=N: set the number of TX queues per port to N.\n");
 	printf("  --txd=N: set the number of descriptors in TX rings to N.\n");
+	printf("  --hairpinq=N: set the number of hairpin queues per port to "
+	       "N.\n");
 	printf("  --burst=N: set the number of packets per burst to N.\n");
 	printf("  --mbcache=N: set the cache of mbuf memory pool to N.\n");
 	printf("  --rxpt=N: set prefetch threshold register of RX rings to N.\n");
@@ -622,6 +624,7 @@ 
 		{ "txq",			1, 0, 0 },
 		{ "rxd",			1, 0, 0 },
 		{ "txd",			1, 0, 0 },
+		{ "hairpinq",			1, 0, 0 },
 		{ "burst",			1, 0, 0 },
 		{ "mbcache",			1, 0, 0 },
 		{ "txpt",			1, 0, 0 },
@@ -1045,6 +1048,31 @@ 
 						  " >= 0 && <= %u\n", n,
 						  get_allowed_max_nb_txq(&pid));
 			}
+			if (!strcmp(lgopts[opt_idx].name, "hairpinq")) {
+				n = atoi(optarg);
+				if (n >= 0 &&
+				    check_nb_hairpinq((queueid_t)n) == 0)
+					nb_hairpinq = (queueid_t) n;
+				else
+					rte_exit(EXIT_FAILURE, "txq %d invalid - must be"
+						  " >= 0 && <= %u\n", n,
+						  get_allowed_max_nb_hairpinq
+						  (&pid));
+				if ((n + nb_txq) < 0 ||
+				    check_nb_txq((queueid_t)(n + nb_txq)) != 0)
+					rte_exit(EXIT_FAILURE, "txq + hairpinq "
+						 "%d invalid - must be"
+						  " >= 0 && <= %u\n",
+						  n + nb_txq,
+						  get_allowed_max_nb_txq(&pid));
+				if ((n + nb_rxq) < 0 ||
+				    check_nb_rxq((queueid_t)(n + nb_rxq)) != 0)
+					rte_exit(EXIT_FAILURE, "rxq + hairpinq "
+						 "%d invalid - must be"
+						  " >= 0 && <= %u\n",
+						  n + nb_rxq,
+						  get_allowed_max_nb_rxq(&pid));
+			}
 			if (!nb_rxq && !nb_txq) {
 				rte_exit(EXIT_FAILURE, "Either rx or tx queues should "
 						"be non-zero\n");
diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
index 38acbc5..890e326 100644
--- a/app/test-pmd/testpmd.c
+++ b/app/test-pmd/testpmd.c
@@ -234,6 +234,7 @@  struct fwd_engine * fwd_engines[] = {
 /*
  * Configurable number of RX/TX queues.
  */
+queueid_t nb_hairpinq; /**< Number of hairpin queues per port. */
 queueid_t nb_rxq = 1; /**< Number of RX queues per port. */
 queueid_t nb_txq = 1; /**< Number of TX queues per port. */
 
@@ -1067,6 +1068,53 @@  struct extmem_param {
 	return 0;
 }
 
+/*
+ * Get the allowed maximum number of hairpin queues.
+ * *pid return the port id which has minimal value of
+ * max_hairpin_queues in all ports.
+ */
+queueid_t
+get_allowed_max_nb_hairpinq(portid_t *pid)
+{
+	queueid_t allowed_max_hairpinq = MAX_QUEUE_ID;
+	portid_t pi;
+	struct rte_eth_hairpin_cap cap;
+
+	RTE_ETH_FOREACH_DEV(pi) {
+		if (rte_eth_dev_hairpin_capability_get(pi, &cap) != 0) {
+			*pid = pi;
+			return 0;
+		}
+		if (cap.max_nb_queues < allowed_max_hairpinq) {
+			allowed_max_hairpinq = cap.max_nb_queues;
+			*pid = pi;
+		}
+	}
+	return allowed_max_hairpinq;
+}
+
+/*
+ * Check input hairpin is valid or not.
+ * If input hairpin is not greater than any of maximum number
+ * of hairpin queues of all ports, it is valid.
+ * if valid, return 0, else return -1
+ */
+int
+check_nb_hairpinq(queueid_t hairpinq)
+{
+	queueid_t allowed_max_hairpinq;
+	portid_t pid = 0;
+
+	allowed_max_hairpinq = get_allowed_max_nb_hairpinq(&pid);
+	if (hairpinq > allowed_max_hairpinq) {
+		printf("Fail: input hairpin (%u) can't be greater "
+		       "than max_hairpin_queues (%u) of port %u\n",
+		       hairpinq, allowed_max_hairpinq, pid);
+		return -1;
+	}
+	return 0;
+}
+
 static void
 init_config(void)
 {
@@ -2020,6 +2068,63 @@  struct extmem_param {
 	return 1;
 }
 
+/* Configure the Rx and Tx hairpin queues for the selected port. */
+static int
+setup_hairpin_queues(portid_t pi)
+{
+	queueid_t qi;
+	struct rte_eth_hairpin_conf hairpin_conf = {
+		.peer_count = 1,
+	};
+	int i;
+	int diag;
+	struct rte_port *port = &ports[pi];
+
+	for (qi = nb_txq, i = 0; qi < nb_hairpinq + nb_txq; qi++) {
+		hairpin_conf.peers[0].port = pi;
+		hairpin_conf.peers[0].queue = i + nb_rxq;
+		diag = rte_eth_tx_hairpin_queue_setup
+			(pi, qi, nb_txd, &hairpin_conf);
+		i++;
+		if (diag == 0)
+			continue;
+
+		/* Fail to setup rx queue, return */
+		if (rte_atomic16_cmpset(&(port->port_status),
+					RTE_PORT_HANDLING,
+					RTE_PORT_STOPPED) == 0)
+			printf("Port %d can not be set back "
+					"to stopped\n", pi);
+		printf("Fail to configure port %d hairpin "
+				"queues\n", pi);
+		/* try to reconfigure queues next time */
+		port->need_reconfig_queues = 1;
+		return -1;
+	}
+	for (qi = nb_rxq, i = 0; qi < nb_hairpinq + nb_rxq; qi++) {
+		hairpin_conf.peers[0].port = pi;
+		hairpin_conf.peers[0].queue = i + nb_txq;
+		diag = rte_eth_rx_hairpin_queue_setup
+			(pi, qi, nb_rxd, &hairpin_conf);
+		i++;
+		if (diag == 0)
+			continue;
+
+		/* Fail to setup rx queue, return */
+		if (rte_atomic16_cmpset(&(port->port_status),
+					RTE_PORT_HANDLING,
+					RTE_PORT_STOPPED) == 0)
+			printf("Port %d can not be set back "
+					"to stopped\n", pi);
+		printf("Fail to configure port %d hairpin "
+				"queues\n", pi);
+		/* try to reconfigure queues next time */
+		port->need_reconfig_queues = 1;
+		return -1;
+	}
+	return 0;
+}
+
 int
 start_port(portid_t pid)
 {
@@ -2028,6 +2133,7 @@  struct extmem_param {
 	queueid_t qi;
 	struct rte_port *port;
 	struct rte_ether_addr mac_addr;
+	struct rte_eth_hairpin_cap cap;
 
 	if (port_id_is_invalid(pid, ENABLED_WARN))
 		return 0;
@@ -2060,9 +2166,16 @@  struct extmem_param {
 			configure_rxtx_dump_callbacks(0);
 			printf("Configuring Port %d (socket %u)\n", pi,
 					port->socket_id);
+			if (nb_hairpinq > 0 &&
+			    rte_eth_dev_hairpin_capability_get(pi, &cap)) {
+				printf("Port %d doesn't support hairpin "
+				       "queues\n", pi);
+				return -1;
+			}
 			/* configure port */
-			diag = rte_eth_dev_configure(pi, nb_rxq, nb_txq,
-						&(port->dev_conf));
+			diag = rte_eth_dev_configure(pi, nb_rxq + nb_hairpinq,
+						     nb_txq + nb_hairpinq,
+						     &(port->dev_conf));
 			if (diag != 0) {
 				if (rte_atomic16_cmpset(&(port->port_status),
 				RTE_PORT_HANDLING, RTE_PORT_STOPPED) == 0)
@@ -2155,6 +2268,9 @@  struct extmem_param {
 				port->need_reconfig_queues = 1;
 				return -1;
 			}
+			/* setup hairpin queues */
+			if (setup_hairpin_queues(pi) != 0)
+				return -1;
 		}
 		configure_rxtx_dump_callbacks(verbose_level);
 		/* start port */
diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
index ec10a1a..8da1e8e 100644
--- a/app/test-pmd/testpmd.h
+++ b/app/test-pmd/testpmd.h
@@ -385,6 +385,7 @@  struct queue_stats_mappings {
 
 extern uint64_t rss_hf;
 
+extern queueid_t nb_hairpinq;
 extern queueid_t nb_rxq;
 extern queueid_t nb_txq;
 
@@ -859,6 +860,8 @@  enum print_warning {
 int check_nb_rxq(queueid_t rxq);
 queueid_t get_allowed_max_nb_txq(portid_t *pid);
 int check_nb_txq(queueid_t txq);
+queueid_t get_allowed_max_nb_hairpinq(portid_t *pid);
+int check_nb_hairpinq(queueid_t hairpinq);
 
 uint16_t dump_rx_pkts(uint16_t port_id, uint16_t queue, struct rte_mbuf *pkts[],
 		      uint16_t nb_pkts, __rte_unused uint16_t max_pkts,
diff --git a/doc/guides/testpmd_app_ug/run_app.rst b/doc/guides/testpmd_app_ug/run_app.rst
index ef677ba..d09c2c3 100644
--- a/doc/guides/testpmd_app_ug/run_app.rst
+++ b/doc/guides/testpmd_app_ug/run_app.rst
@@ -266,6 +266,17 @@  The command line options are:
     Set the number of descriptors in the TX rings to N, where N > 0.
     The default value is 512.
 
+*   ``--hairpinq=N``
+
+    Set the number of hairpin queues per port to N, where 1 <= N <= 65535.
+    The default value is 0. The number of hairpin queues are added to the
+    number of TX queues and to the number of RX queues. then the first
+    RX hairpin is binded to the first TX hairpin, the second RX hairpin is
+    binded to the second TX hairpin and so on. The index of the first
+    RX hairpin queue is the number of RX queues as configured using --rxq.
+    The index of the first TX hairpin queue is the number of TX queues
+    as configured using --txq.
+
 *   ``--burst=N``
 
     Set the number of packets per burst to N, where 1 <= N <= 512.