[v4] eal: remove non-thread panic calls from init sequence
Checks
Commit Message
This patch changes some void functions to return a value,
so that the init sequence may tear down orderly
instead of calling panic.
Signed-off-by: Arnon Warshavsky <arnon@qwilt.com>
---
The calls for launching core messaging threads were left in tact
in all 3 eal implementations.
This should be addressed in a different patchset.
There are still cases where the PMDs or message threads
may call panic with no context for the user.
For these I will submit a patch suggesting a callback registration,
allowing the user to register a context to be called
in case of a panic that takes place outside the init sequence.
-v2 fix freebsd compilation
-v3 fix freebsd compilation, haste from the devil
-v4 fix comments by David
lib/librte_eal/freebsd/eal/eal.c | 59 ++++++++++++++++++--------
lib/librte_eal/linux/eal/eal.c | 91 +++++++++++++++++++++++++++-------------
2 files changed, 103 insertions(+), 47 deletions(-)
Comments
On Tue, Jun 4, 2019 at 5:45 PM Arnon Warshavsky <arnon@qwilt.com> wrote:
> This patch changes some void functions to return a value,
> so that the init sequence may tear down orderly
> instead of calling panic.
>
All we care about in this patch are the panics wrt the shared configuration
init.
Can the commit title and description refer to this ?
> Signed-off-by: Arnon Warshavsky <arnon@qwilt.com>
> ---
>
> The calls for launching core messaging threads were left in tact
> in all 3 eal implementations.
> This should be addressed in a different patchset.
> There are still cases where the PMDs or message threads
> may call panic with no context for the user.
> For these I will submit a patch suggesting a callback registration,
> allowing the user to register a context to be called
> in case of a panic that takes place outside the init sequence.
>
> -v2 fix freebsd compilation
> -v3 fix freebsd compilation, haste from the devil
> -v4 fix comments by David
>
> lib/librte_eal/freebsd/eal/eal.c | 59 ++++++++++++++++++--------
> lib/librte_eal/linux/eal/eal.c | 91
> +++++++++++++++++++++++++++-------------
> 2 files changed, 103 insertions(+), 47 deletions(-)
>
> diff --git a/lib/librte_eal/freebsd/eal/eal.c
> b/lib/librte_eal/freebsd/eal/eal.c
> index c6ac902..4b4db3b 100644
> --- a/lib/librte_eal/freebsd/eal/eal.c
> +++ b/lib/librte_eal/freebsd/eal/eal.c
> @@ -215,7 +215,7 @@ enum rte_iova_mode
> * We also don't lock the whole file, so that in future we can use
> read-locks
> * on other parts, e.g. memzones, to detect if there are running secondary
> * processes. */
> -static void
> +static int
> rte_eal_config_create(void)
> {
> void *rte_mem_cfg_addr;
> @@ -224,60 +224,79 @@ enum rte_iova_mode
> const char *pathname = eal_runtime_config_path();
>
> if (internal_config.no_shconf)
> - return;
> + return 0;
>
> if (mem_cfg_fd < 0){
> mem_cfg_fd = open(pathname, O_RDWR | O_CREAT, 0600);
> - if (mem_cfg_fd < 0)
> - rte_panic("Cannot open '%s' for rte_mem_config\n",
> pathname);
> + if (mem_cfg_fd < 0) {
> + RTE_LOG(ERR, EAL, "Cannot open '%s' for
> rte_mem_config\n",
> + pathname);
> + return -1;
> + }
> }
>
> retval = ftruncate(mem_cfg_fd, sizeof(*rte_config.mem_config));
> if (retval < 0){
> close(mem_cfg_fd);
> - rte_panic("Cannot resize '%s' for rte_mem_config\n",
> pathname);
> + mem_cfg_id = -1;
>
I bet you did not compile FreeBSD :-).
+ RTE_LOG(ERR, EAL, "Cannot resize '%s' for rte_mem_config\n",
> + pathname);
> + return -1;
> }
>
> retval = fcntl(mem_cfg_fd, F_SETLK, &wr_lock);
> if (retval < 0){
> close(mem_cfg_fd);
> - rte_exit(EXIT_FAILURE, "Cannot create lock on '%s'. Is
> another primary "
> + mem_cfg_fd = -1;
> + RTE_LOG(ERR, EAL, "Cannot create lock on '%s'. Is another
> primary "
> "process running?\n", pathname);
>
Indent.
Not relevant to this patch, but I find it odd to truncate before trying to
take the lock.
Might be something to look at some day, anyway.. :-)
+ return -1;
> }
>
> rte_mem_cfg_addr = mmap(NULL, sizeof(*rte_config.mem_config),
> PROT_READ | PROT_WRITE, MAP_SHARED,
> mem_cfg_fd, 0);
>
> if (rte_mem_cfg_addr == MAP_FAILED){
> - rte_panic("Cannot mmap memory for rte_config\n");
> + RTE_LOG(ERR, EAL, "Cannot mmap memory for rte_config\n");
> + return -1;
>
We failed to mmap.
Since eal init is going to fail, we should not leave this fd open.
}
> memcpy(rte_mem_cfg_addr, &early_mem_config,
> sizeof(early_mem_config));
> rte_config.mem_config = rte_mem_cfg_addr;
> +
> + return 0;
> }
>
> /* attach to an existing shared memory config */
> -static void
> +static int
> rte_eal_config_attach(void)
> {
> void *rte_mem_cfg_addr;
> const char *pathname = eal_runtime_config_path();
>
> if (internal_config.no_shconf)
> - return;
> + return 0;
>
> if (mem_cfg_fd < 0){
> mem_cfg_fd = open(pathname, O_RDWR);
> - if (mem_cfg_fd < 0)
> - rte_panic("Cannot open '%s' for rte_mem_config\n",
> pathname);
> + if (mem_cfg_fd < 0) {
> + RTE_LOG(ERR, EAL, "Cannot open '%s' for
> rte_mem_config\n",
> + pathname);
> + return -1;
> + }
> }
>
> rte_mem_cfg_addr = mmap(NULL, sizeof(*rte_config.mem_config),
> PROT_READ | PROT_WRITE, MAP_SHARED,
> mem_cfg_fd, 0);
> close(mem_cfg_fd);
>
At this point, we are in a secondary process.
We don't need to keep this fd open which is fine.
But at least for consistency, we should reset it to -1.
- if (rte_mem_cfg_addr == MAP_FAILED)
> - rte_panic("Cannot mmap memory for rte_config\n");
> + if (rte_mem_cfg_addr == MAP_FAILED) {
> + RTE_LOG(ERR, EAL, "Cannot mmap memory for rte_config!
> error %i (%s)\n",
> + errno, strerror(errno));
> + return -1;
> + }
>
> rte_config.mem_config = rte_mem_cfg_addr;
> +
> + return 0;
> }
>
> /* Detect if we are a primary or a secondary process */
> @@ -306,23 +325,29 @@ enum rte_proc_type_t
> }
>
> /* Sets up rte_config structure with the pointer to shared memory
> config.*/
> -static void
> +static int
> rte_config_init(void)
> {
> rte_config.process_type = internal_config.process_type;
>
> switch (rte_config.process_type){
> case RTE_PROC_PRIMARY:
> - rte_eal_config_create();
> + if (rte_eal_config_create() < 0)
> + return -1;
> break;
> case RTE_PROC_SECONDARY:
> - rte_eal_config_attach();
> + if (rte_eal_config_attach() < 0)
> + return -1;
> rte_eal_mcfg_wait_complete(rte_config.mem_config);
> break;
> case RTE_PROC_AUTO:
> case RTE_PROC_INVALID:
> - rte_panic("Invalid process type\n");
> + RTE_LOG(ERR, EAL, "Invalid process type %d\n",
> + rte_config.process_type);
> + return -1;
> }
> +
> + return 0;
> }
>
> /* display usage */
> diff --git a/lib/librte_eal/linux/eal/eal.c
> b/lib/librte_eal/linux/eal/eal.c
> index 1613996..1ec264f 100644
> --- a/lib/librte_eal/linux/eal/eal.c
> +++ b/lib/librte_eal/linux/eal/eal.c
> @@ -300,7 +300,7 @@ enum rte_iova_mode
> * We also don't lock the whole file, so that in future we can use
> read-locks
> * on other parts, e.g. memzones, to detect if there are running secondary
> * processes. */
> -static void
> +static int
> rte_eal_config_create(void)
> {
> void *rte_mem_cfg_addr;
> @@ -309,7 +309,7 @@ enum rte_iova_mode
> const char *pathname = eal_runtime_config_path();
>
> if (internal_config.no_shconf)
> - return;
> + return 0;
>
> /* map the config before hugepage address so that we don't waste a
> page */
> if (internal_config.base_virtaddr != 0)
> @@ -321,28 +321,37 @@ enum rte_iova_mode
>
> if (mem_cfg_fd < 0){
> mem_cfg_fd = open(pathname, O_RDWR | O_CREAT, 0600);
> - if (mem_cfg_fd < 0)
> - rte_panic("Cannot open '%s' for rte_mem_config\n",
> pathname);
> + if (mem_cfg_fd < 0) {
> + RTE_LOG(ERR, EAL, "Cannot open '%s' for
> rte_mem_config\n",
> + pathname);
> + return -1;
> + }
> }
>
> retval = ftruncate(mem_cfg_fd, sizeof(*rte_config.mem_config));
> if (retval < 0){
> close(mem_cfg_fd);
> - rte_panic("Cannot resize '%s' for rte_mem_config\n",
> pathname);
> + mem_cfg_fd = -1;
> + RTE_LOG(ERR, EAL, "Cannot resize '%s' for
> rte_mem_config\n",
> + pathname);
> + return -1;
> }
>
> retval = fcntl(mem_cfg_fd, F_SETLK, &wr_lock);
> if (retval < 0){
> close(mem_cfg_fd);
> - rte_exit(EXIT_FAILURE, "Cannot create lock on '%s'. Is
> another primary "
> - "process running?\n", pathname);
> + mem_cfg_fd = -1;
> + RTE_LOG(ERR, EAL, "Cannot create lock on '%s'. Is another
> primary "
> + "process running?\n", pathname);
> + return -1;
> }
>
> rte_mem_cfg_addr = mmap(rte_mem_cfg_addr,
> sizeof(*rte_config.mem_config),
> PROT_READ | PROT_WRITE, MAP_SHARED,
> mem_cfg_fd, 0);
>
> if (rte_mem_cfg_addr == MAP_FAILED){
> - rte_panic("Cannot mmap memory for rte_config\n");
> + RTE_LOG(ERR, EAL, "Cannot mmap memory for rte_config\n");
> + return -1;
>
Same comment than FreeBSD, mmap failed, we can close/reset mem_cfg_fd.
}
> memcpy(rte_mem_cfg_addr, &early_mem_config,
> sizeof(early_mem_config));
> rte_config.mem_config = rte_mem_cfg_addr;
> @@ -353,10 +362,11 @@ enum rte_iova_mode
>
> rte_config.mem_config->dma_maskbits = 0;
>
> + return 0;
> }
>
> /* attach to an existing shared memory config */
> -static void
> +static int
> rte_eal_config_attach(void)
> {
> struct rte_mem_config *mem_config;
> @@ -364,33 +374,40 @@ enum rte_iova_mode
> const char *pathname = eal_runtime_config_path();
>
> if (internal_config.no_shconf)
> - return;
> + return 0;
>
> if (mem_cfg_fd < 0){
> mem_cfg_fd = open(pathname, O_RDWR);
> - if (mem_cfg_fd < 0)
> - rte_panic("Cannot open '%s' for rte_mem_config\n",
> pathname);
> + if (mem_cfg_fd < 0) {
> + RTE_LOG(ERR, EAL, "Cannot open '%s' for
> rte_mem_config\n",
> + pathname);
> + return -1;
> + }
> }
>
> /* map it as read-only first */
> mem_config = (struct rte_mem_config *) mmap(NULL,
> sizeof(*mem_config),
> PROT_READ, MAP_SHARED, mem_cfg_fd, 0);
> - if (mem_config == MAP_FAILED)
> - rte_panic("Cannot mmap memory for rte_config! error %i
> (%s)\n",
> - errno, strerror(errno));
> + if (mem_config == MAP_FAILED) {
> + RTE_LOG(ERR, EAL, "Cannot mmap memory for rte_config!
> error %i (%s)\n",
> + errno, strerror(errno));
> + return -1;
> + }
>
We can close/reset mem_cfg_fd but in the error path _only_: we are going to
reuse it in rte_eal_config_reattach.
> rte_config.mem_config = mem_config;
> +
> + return 0;
> }
>
> /* reattach the shared config at exact memory location primary process
> has it */
> -static void
> +static int
> rte_eal_config_reattach(void)
> {
> struct rte_mem_config *mem_config;
> void *rte_mem_cfg_addr;
>
> if (internal_config.no_shconf)
> - return;
> + return 0;
>
> /* save the address primary process has mapped shared config to */
> rte_mem_cfg_addr = (void *) (uintptr_t)
> rte_config.mem_config->mem_cfg_addr;
> @@ -403,18 +420,22 @@ enum rte_iova_mode
> sizeof(*mem_config), PROT_READ | PROT_WRITE,
> MAP_SHARED,
> mem_cfg_fd, 0);
> if (mem_config == MAP_FAILED || mem_config != rte_mem_cfg_addr) {
> - if (mem_config != MAP_FAILED)
> + if (mem_config != MAP_FAILED) {
> /* errno is stale, don't use */
> - rte_panic("Cannot mmap memory for rte_config at
> [%p], got [%p]"
> - " - please use '--base-virtaddr'
> option\n",
> - rte_mem_cfg_addr, mem_config);
> - else
> - rte_panic("Cannot mmap memory for rte_config!
> error %i (%s)\n",
> - errno, strerror(errno));
> + RTE_LOG(ERR, EAL, "Cannot mmap memory for
> rte_config at [%p], got [%p]"
> + " - please use '--base-virtaddr' option\n",
> + rte_mem_cfg_addr, mem_config);
> + return -1;
> + }
> + RTE_LOG(ERR, EAL, "Cannot mmap memory for rte_config!
> error %i (%s)\n",
> + errno, strerror(errno));
> + return -1;
> }
> close(mem_cfg_fd);
>
Let's move this close and add a reset to -1 before the branch.
> rte_config.mem_config = mem_config;
> +
> + return 0;
> }
>
> /* Detect if we are a primary or a secondary process */
> @@ -461,26 +482,33 @@ enum rte_proc_type_t
> }
>
> /* Sets up rte_config structure with the pointer to shared memory
> config.*/
> -static void
> +static int
> rte_config_init(void)
> {
> rte_config.process_type = internal_config.process_type;
>
> switch (rte_config.process_type){
> case RTE_PROC_PRIMARY:
> - rte_eal_config_create();
> + if (rte_eal_config_create() < 0)
> + return -1;
> eal_update_mem_config();
> break;
> case RTE_PROC_SECONDARY:
> - rte_eal_config_attach();
> + if (rte_eal_config_attach() < 0)
> + return -1;
> rte_eal_mcfg_wait_complete(rte_config.mem_config);
> - rte_eal_config_reattach();
> + if (rte_eal_config_reattach() < 0)
> + return -1;
> eal_update_internal_config();
> break;
> case RTE_PROC_AUTO:
> case RTE_PROC_INVALID:
> - rte_panic("Invalid process type\n");
> + RTE_LOG(ERR, EAL, "Invalid process type %d\n",
> + rte_config.process_type);
> + return -1;
> }
> +
> + return 0;
> }
>
> /* Unlocks hugepage directories that were locked by
> eal_hugepage_info_init */
> @@ -998,7 +1026,10 @@ static void rte_eal_init_alert(const char *msg)
> return -1;
> }
>
> - rte_config_init();
> + if (rte_config_init() < 0) {
> + rte_eal_init_alert("Cannot init config");
> + return -1;
> + }
>
This hunk is missing for FreeBSD.
> if (rte_eal_intr_init() < 0) {
> rte_eal_init_alert("Cannot init interrupt-handling
> thread");
> --
> 1.8.3.1
>
>
On Wed, Jun 5, 2019 at 10:50 AM David Marchand <david.marchand@redhat.com>
wrote:
>
>
> On Tue, Jun 4, 2019 at 5:45 PM Arnon Warshavsky <arnon@qwilt.com> wrote:
>
>> This patch changes some void functions to return a value,
>> so that the init sequence may tear down orderly
>> instead of calling panic.
>>
>
> All we care about in this patch are the panics wrt the shared
> configuration init.
> Can the commit title and description refer to this ?
>
Will remove the non-thread from the title.
Can you be more specific/ offer your view per the description?
>
>
>> Signed-off-by: Arnon Warshavsky <arnon@qwilt.com>
>> ---
>>
>> The calls for launching core messaging threads were left in tact
>> in all 3 eal implementations.
>>
>>
> retval = ftruncate(mem_cfg_fd, sizeof(*rte_config.mem_config));
>> if (retval < 0){
>> close(mem_cfg_fd);
>> - rte_panic("Cannot resize '%s' for rte_mem_config\n",
>> pathname);
>> + mem_cfg_id = -1;
>>
>
> I bet you did not compile FreeBSD :-).
> Yup...Not only haste is from the devil..Getting myself a fbsd vm now..
>
> + RTE_LOG(ERR, EAL, "Cannot resize '%s' for
>> rte_mem_config\n",
>> + pathname);
>> + return -1;
>> }
>>
>> retval = fcntl(mem_cfg_fd, F_SETLK, &wr_lock);
>> if (retval < 0){
>> close(mem_cfg_fd);
>> - rte_exit(EXIT_FAILURE, "Cannot create lock on '%s'. Is
>> another primary "
>> + mem_cfg_fd = -1;
>> + RTE_LOG(ERR, EAL, "Cannot create lock on '%s'. Is another
>> primary "
>> "process running?\n", pathname);
>>
>
> Indent.
>
Ack
>
> Not relevant to this patch, but I find it odd to truncate before trying to
> take the lock.
> Might be something to look at some day, anyway.. :-)
>
>
> + return -1;
>> }
>>
>> rte_mem_cfg_addr = mmap(NULL, sizeof(*rte_config.mem_config),
>> PROT_READ | PROT_WRITE, MAP_SHARED,
>> mem_cfg_fd, 0);
>>
>> if (rte_mem_cfg_addr == MAP_FAILED){
>> - rte_panic("Cannot mmap memory for rte_config\n");
>> + RTE_LOG(ERR, EAL, "Cannot mmap memory for rte_config\n");
>> + return -1;
>>
>
> We failed to mmap.
> Since eal init is going to fail, we should not leave this fd open.
>
Ok. In general I tried to stick with previous functionality by just
replacing the panic with the exit path,
rather than improve it, but this one is indeed straight forward.
>
>> + }
>> }
>>
>> rte_mem_cfg_addr = mmap(NULL, sizeof(*rte_config.mem_config),
>> PROT_READ | PROT_WRITE, MAP_SHARED,
>> mem_cfg_fd, 0);
>> close(mem_cfg_fd);
>>
>
> At this point, we are in a secondary process.
> We don't need to keep this fd open which is fine.
> But at least for consistency, we should reset it to -1.
>
Ack. Same as above
>
>
>> if (rte_mem_cfg_addr == MAP_FAILED){
>> - rte_panic("Cannot mmap memory for rte_config\n");
>> + RTE_LOG(ERR, EAL, "Cannot mmap memory for rte_config\n");
>> + return -1;
>>
>
> Same comment than FreeBSD, mmap failed, we can close/reset mem_cfg_fd.
>
> Ack
>
>
>> + }
>>
>
> We can close/reset mem_cfg_fd but in the error path _only_: we are going
> to reuse it in rte_eal_config_reattach.
>
>
>> rte_config.mem_config = mem_config;
>> +
>> + return 0;
>> }
>>
>> /* reattach the shared config at exact memory location primary process
>> has it */
>> -static void
>> +static int
>> rte_eal_config_reattach(void)
>> {
>> struct rte_mem_config *mem_config;
>> void *rte_mem_cfg_addr;
>>
>> if (internal_config.no_shconf)
>> - return;
>> + return 0;
>>
>> /* save the address primary process has mapped shared config to */
>> rte_mem_cfg_addr = (void *) (uintptr_t)
>> rte_config.mem_config->mem_cfg_addr;
>> @@ -403,18 +420,22 @@ enum rte_iova_mode
>> sizeof(*mem_config), PROT_READ | PROT_WRITE,
>> MAP_SHARED,
>> mem_cfg_fd, 0);
>> if (mem_config == MAP_FAILED || mem_config != rte_mem_cfg_addr) {
>> - if (mem_config != MAP_FAILED)
>> + if (mem_config != MAP_FAILED) {
>> /* errno is stale, don't use */
>> - rte_panic("Cannot mmap memory for rte_config at
>> [%p], got [%p]"
>> - " - please use '--base-virtaddr'
>> option\n",
>> - rte_mem_cfg_addr, mem_config);
>> - else
>> - rte_panic("Cannot mmap memory for rte_config!
>> error %i (%s)\n",
>> - errno, strerror(errno));
>> + RTE_LOG(ERR, EAL, "Cannot mmap memory for
>> rte_config at [%p], got [%p]"
>> + " - please use '--base-virtaddr'
>> option\n",
>> + rte_mem_cfg_addr, mem_config);
>> + return -1;
>> + }
>> + RTE_LOG(ERR, EAL, "Cannot mmap memory for rte_config!
>> error %i (%s)\n",
>> + errno, strerror(errno));
>> + return -1;
>> }
>> close(mem_cfg_fd);
>>
>
> Let's move this close and add a reset to -1 before the branch.
>
Ack
>
>
>> - rte_config_init();
>> + if (rte_config_init() < 0) {
>> + rte_eal_init_alert("Cannot init config");
>> + return -1;
>> + }
>>
>
> This hunk is missing for FreeBSD.
>
> mmmmm , not enough coffee in the process :-/
>
thanks
On Wed, Jun 5, 2019 at 5:44 PM Arnon Warshavsky <arnon@qwilt.com> wrote:
> On Wed, Jun 5, 2019 at 10:50 AM David Marchand <david.marchand@redhat.com>
wrote:
>> On Tue, Jun 4, 2019 at 5:45 PM Arnon Warshavsky <arnon@qwilt.com> wrote:
>>> This patch changes some void functions to return a value,
>>> so that the init sequence may tear down orderly
>>> instead of calling panic.
>>
>> All we care about in this patch are the panics wrt the shared
configuration init.
>> Can the commit title and description refer to this ?
>
> Will remove the non-thread from the title.
> Can you be more specific/ offer your view per the description?
Looking at the git history, how about:
eal: do not panic on shared memory init
--
David Marchand
@@ -215,7 +215,7 @@ enum rte_iova_mode
* We also don't lock the whole file, so that in future we can use read-locks
* on other parts, e.g. memzones, to detect if there are running secondary
* processes. */
-static void
+static int
rte_eal_config_create(void)
{
void *rte_mem_cfg_addr;
@@ -224,60 +224,79 @@ enum rte_iova_mode
const char *pathname = eal_runtime_config_path();
if (internal_config.no_shconf)
- return;
+ return 0;
if (mem_cfg_fd < 0){
mem_cfg_fd = open(pathname, O_RDWR | O_CREAT, 0600);
- if (mem_cfg_fd < 0)
- rte_panic("Cannot open '%s' for rte_mem_config\n", pathname);
+ if (mem_cfg_fd < 0) {
+ RTE_LOG(ERR, EAL, "Cannot open '%s' for rte_mem_config\n",
+ pathname);
+ return -1;
+ }
}
retval = ftruncate(mem_cfg_fd, sizeof(*rte_config.mem_config));
if (retval < 0){
close(mem_cfg_fd);
- rte_panic("Cannot resize '%s' for rte_mem_config\n", pathname);
+ mem_cfg_id = -1;
+ RTE_LOG(ERR, EAL, "Cannot resize '%s' for rte_mem_config\n",
+ pathname);
+ return -1;
}
retval = fcntl(mem_cfg_fd, F_SETLK, &wr_lock);
if (retval < 0){
close(mem_cfg_fd);
- rte_exit(EXIT_FAILURE, "Cannot create lock on '%s'. Is another primary "
+ mem_cfg_fd = -1;
+ RTE_LOG(ERR, EAL, "Cannot create lock on '%s'. Is another primary "
"process running?\n", pathname);
+ return -1;
}
rte_mem_cfg_addr = mmap(NULL, sizeof(*rte_config.mem_config),
PROT_READ | PROT_WRITE, MAP_SHARED, mem_cfg_fd, 0);
if (rte_mem_cfg_addr == MAP_FAILED){
- rte_panic("Cannot mmap memory for rte_config\n");
+ RTE_LOG(ERR, EAL, "Cannot mmap memory for rte_config\n");
+ return -1;
}
memcpy(rte_mem_cfg_addr, &early_mem_config, sizeof(early_mem_config));
rte_config.mem_config = rte_mem_cfg_addr;
+
+ return 0;
}
/* attach to an existing shared memory config */
-static void
+static int
rte_eal_config_attach(void)
{
void *rte_mem_cfg_addr;
const char *pathname = eal_runtime_config_path();
if (internal_config.no_shconf)
- return;
+ return 0;
if (mem_cfg_fd < 0){
mem_cfg_fd = open(pathname, O_RDWR);
- if (mem_cfg_fd < 0)
- rte_panic("Cannot open '%s' for rte_mem_config\n", pathname);
+ if (mem_cfg_fd < 0) {
+ RTE_LOG(ERR, EAL, "Cannot open '%s' for rte_mem_config\n",
+ pathname);
+ return -1;
+ }
}
rte_mem_cfg_addr = mmap(NULL, sizeof(*rte_config.mem_config),
PROT_READ | PROT_WRITE, MAP_SHARED, mem_cfg_fd, 0);
close(mem_cfg_fd);
- if (rte_mem_cfg_addr == MAP_FAILED)
- rte_panic("Cannot mmap memory for rte_config\n");
+ if (rte_mem_cfg_addr == MAP_FAILED) {
+ RTE_LOG(ERR, EAL, "Cannot mmap memory for rte_config! error %i (%s)\n",
+ errno, strerror(errno));
+ return -1;
+ }
rte_config.mem_config = rte_mem_cfg_addr;
+
+ return 0;
}
/* Detect if we are a primary or a secondary process */
@@ -306,23 +325,29 @@ enum rte_proc_type_t
}
/* Sets up rte_config structure with the pointer to shared memory config.*/
-static void
+static int
rte_config_init(void)
{
rte_config.process_type = internal_config.process_type;
switch (rte_config.process_type){
case RTE_PROC_PRIMARY:
- rte_eal_config_create();
+ if (rte_eal_config_create() < 0)
+ return -1;
break;
case RTE_PROC_SECONDARY:
- rte_eal_config_attach();
+ if (rte_eal_config_attach() < 0)
+ return -1;
rte_eal_mcfg_wait_complete(rte_config.mem_config);
break;
case RTE_PROC_AUTO:
case RTE_PROC_INVALID:
- rte_panic("Invalid process type\n");
+ RTE_LOG(ERR, EAL, "Invalid process type %d\n",
+ rte_config.process_type);
+ return -1;
}
+
+ return 0;
}
/* display usage */
@@ -300,7 +300,7 @@ enum rte_iova_mode
* We also don't lock the whole file, so that in future we can use read-locks
* on other parts, e.g. memzones, to detect if there are running secondary
* processes. */
-static void
+static int
rte_eal_config_create(void)
{
void *rte_mem_cfg_addr;
@@ -309,7 +309,7 @@ enum rte_iova_mode
const char *pathname = eal_runtime_config_path();
if (internal_config.no_shconf)
- return;
+ return 0;
/* map the config before hugepage address so that we don't waste a page */
if (internal_config.base_virtaddr != 0)
@@ -321,28 +321,37 @@ enum rte_iova_mode
if (mem_cfg_fd < 0){
mem_cfg_fd = open(pathname, O_RDWR | O_CREAT, 0600);
- if (mem_cfg_fd < 0)
- rte_panic("Cannot open '%s' for rte_mem_config\n", pathname);
+ if (mem_cfg_fd < 0) {
+ RTE_LOG(ERR, EAL, "Cannot open '%s' for rte_mem_config\n",
+ pathname);
+ return -1;
+ }
}
retval = ftruncate(mem_cfg_fd, sizeof(*rte_config.mem_config));
if (retval < 0){
close(mem_cfg_fd);
- rte_panic("Cannot resize '%s' for rte_mem_config\n", pathname);
+ mem_cfg_fd = -1;
+ RTE_LOG(ERR, EAL, "Cannot resize '%s' for rte_mem_config\n",
+ pathname);
+ return -1;
}
retval = fcntl(mem_cfg_fd, F_SETLK, &wr_lock);
if (retval < 0){
close(mem_cfg_fd);
- rte_exit(EXIT_FAILURE, "Cannot create lock on '%s'. Is another primary "
- "process running?\n", pathname);
+ mem_cfg_fd = -1;
+ RTE_LOG(ERR, EAL, "Cannot create lock on '%s'. Is another primary "
+ "process running?\n", pathname);
+ return -1;
}
rte_mem_cfg_addr = mmap(rte_mem_cfg_addr, sizeof(*rte_config.mem_config),
PROT_READ | PROT_WRITE, MAP_SHARED, mem_cfg_fd, 0);
if (rte_mem_cfg_addr == MAP_FAILED){
- rte_panic("Cannot mmap memory for rte_config\n");
+ RTE_LOG(ERR, EAL, "Cannot mmap memory for rte_config\n");
+ return -1;
}
memcpy(rte_mem_cfg_addr, &early_mem_config, sizeof(early_mem_config));
rte_config.mem_config = rte_mem_cfg_addr;
@@ -353,10 +362,11 @@ enum rte_iova_mode
rte_config.mem_config->dma_maskbits = 0;
+ return 0;
}
/* attach to an existing shared memory config */
-static void
+static int
rte_eal_config_attach(void)
{
struct rte_mem_config *mem_config;
@@ -364,33 +374,40 @@ enum rte_iova_mode
const char *pathname = eal_runtime_config_path();
if (internal_config.no_shconf)
- return;
+ return 0;
if (mem_cfg_fd < 0){
mem_cfg_fd = open(pathname, O_RDWR);
- if (mem_cfg_fd < 0)
- rte_panic("Cannot open '%s' for rte_mem_config\n", pathname);
+ if (mem_cfg_fd < 0) {
+ RTE_LOG(ERR, EAL, "Cannot open '%s' for rte_mem_config\n",
+ pathname);
+ return -1;
+ }
}
/* map it as read-only first */
mem_config = (struct rte_mem_config *) mmap(NULL, sizeof(*mem_config),
PROT_READ, MAP_SHARED, mem_cfg_fd, 0);
- if (mem_config == MAP_FAILED)
- rte_panic("Cannot mmap memory for rte_config! error %i (%s)\n",
- errno, strerror(errno));
+ if (mem_config == MAP_FAILED) {
+ RTE_LOG(ERR, EAL, "Cannot mmap memory for rte_config! error %i (%s)\n",
+ errno, strerror(errno));
+ return -1;
+ }
rte_config.mem_config = mem_config;
+
+ return 0;
}
/* reattach the shared config at exact memory location primary process has it */
-static void
+static int
rte_eal_config_reattach(void)
{
struct rte_mem_config *mem_config;
void *rte_mem_cfg_addr;
if (internal_config.no_shconf)
- return;
+ return 0;
/* save the address primary process has mapped shared config to */
rte_mem_cfg_addr = (void *) (uintptr_t) rte_config.mem_config->mem_cfg_addr;
@@ -403,18 +420,22 @@ enum rte_iova_mode
sizeof(*mem_config), PROT_READ | PROT_WRITE, MAP_SHARED,
mem_cfg_fd, 0);
if (mem_config == MAP_FAILED || mem_config != rte_mem_cfg_addr) {
- if (mem_config != MAP_FAILED)
+ if (mem_config != MAP_FAILED) {
/* errno is stale, don't use */
- rte_panic("Cannot mmap memory for rte_config at [%p], got [%p]"
- " - please use '--base-virtaddr' option\n",
- rte_mem_cfg_addr, mem_config);
- else
- rte_panic("Cannot mmap memory for rte_config! error %i (%s)\n",
- errno, strerror(errno));
+ RTE_LOG(ERR, EAL, "Cannot mmap memory for rte_config at [%p], got [%p]"
+ " - please use '--base-virtaddr' option\n",
+ rte_mem_cfg_addr, mem_config);
+ return -1;
+ }
+ RTE_LOG(ERR, EAL, "Cannot mmap memory for rte_config! error %i (%s)\n",
+ errno, strerror(errno));
+ return -1;
}
close(mem_cfg_fd);
rte_config.mem_config = mem_config;
+
+ return 0;
}
/* Detect if we are a primary or a secondary process */
@@ -461,26 +482,33 @@ enum rte_proc_type_t
}
/* Sets up rte_config structure with the pointer to shared memory config.*/
-static void
+static int
rte_config_init(void)
{
rte_config.process_type = internal_config.process_type;
switch (rte_config.process_type){
case RTE_PROC_PRIMARY:
- rte_eal_config_create();
+ if (rte_eal_config_create() < 0)
+ return -1;
eal_update_mem_config();
break;
case RTE_PROC_SECONDARY:
- rte_eal_config_attach();
+ if (rte_eal_config_attach() < 0)
+ return -1;
rte_eal_mcfg_wait_complete(rte_config.mem_config);
- rte_eal_config_reattach();
+ if (rte_eal_config_reattach() < 0)
+ return -1;
eal_update_internal_config();
break;
case RTE_PROC_AUTO:
case RTE_PROC_INVALID:
- rte_panic("Invalid process type\n");
+ RTE_LOG(ERR, EAL, "Invalid process type %d\n",
+ rte_config.process_type);
+ return -1;
}
+
+ return 0;
}
/* Unlocks hugepage directories that were locked by eal_hugepage_info_init */
@@ -998,7 +1026,10 @@ static void rte_eal_init_alert(const char *msg)
return -1;
}
- rte_config_init();
+ if (rte_config_init() < 0) {
+ rte_eal_init_alert("Cannot init config");
+ return -1;
+ }
if (rte_eal_intr_init() < 0) {
rte_eal_init_alert("Cannot init interrupt-handling thread");