[dpdk-dev,dpdk-dev,v2,3/3] test: enable HW CRC strip by default
Checks
Commit Message
Since VF has no ability to disable/enable HW CRC strip for non-DPDK PF
drivers, and for most case of kernel driver default enable HW CRC strip,
if disable HW CRC strip in test app's rxmode, VF driver will return fail and
result the VF launch failure. So this patch default to enable HW CRC strip
to let VF launch successful.
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Cc: stable@dpdk.org
---
test/test-pipeline/init.c | 2 +-
test/test/test_kni.c | 2 +-
test/test/test_link_bonding.c | 4 ++--
test/test/test_link_bonding_mode4.c | 2 +-
test/test/test_link_bonding_rssconf.c | 4 ++--
test/test/test_pmd_perf.c | 2 +-
6 files changed, 8 insertions(+), 8 deletions(-)
Comments
> -----Original Message-----
> From: Guo, Jia
> Sent: Monday, March 20, 2017 5:58 PM
> To: Zhang, Helin <helin.zhang@intel.com>; Wu, Jingjing <jingjing.wu@intel.com>
> Cc: dev@dpdk.org; Guo, Jia <jia.guo@intel.com>; stable@dpdk.org
> Subject: [dpdk-dev v2 3/3] test: enable HW CRC strip by default
>
> Since VF has no ability to disable/enable HW CRC strip for non-DPDK PF drivers,
> and for most case of kernel driver default enable HW CRC strip, if disable HW
> CRC strip in test app's rxmode, VF driver will return fail and result the VF launch
> failure. So this patch default to enable HW CRC strip to let VF launch successful.
>
> Signed-off-by: Jeff Guo <jia.guo@intel.com>
> Cc: stable@dpdk.org
> ---
> test/test-pipeline/init.c | 2 +-
> test/test/test_kni.c | 2 +-
> test/test/test_link_bonding.c | 4 ++--
> test/test/test_link_bonding_mode4.c | 2 +-
> test/test/test_link_bonding_rssconf.c | 4 ++--
> test/test/test_pmd_perf.c | 2 +-
> 6 files changed, 8 insertions(+), 8 deletions(-)
>
> diff --git a/test/test-pipeline/init.c b/test/test-pipeline/init.c index
> aef082f..00dbc27 100644
> --- a/test/test-pipeline/init.c
> +++ b/test/test-pipeline/init.c
> @@ -105,7 +105,7 @@ static struct rte_eth_conf port_conf = {
> .hw_ip_checksum = 1, /* IP checksum offload enabled */
> .hw_vlan_filter = 0, /* VLAN filtering disabled */
> .jumbo_frame = 0, /* Jumbo Frame Support disabled */
> - .hw_strip_crc = 0, /* CRC stripped by hardware */
> + .hw_strip_crc = 1, /* CRC stripped by hardware */
> },
> .rx_adv_conf = {
> .rss_conf = {
> diff --git a/test/test/test_kni.c b/test/test/test_kni.c index 309741c..db17fdf
> 100644
> --- a/test/test/test_kni.c
> +++ b/test/test/test_kni.c
> @@ -92,7 +92,7 @@ static const struct rte_eth_conf port_conf = {
> .hw_ip_checksum = 0,
> .hw_vlan_filter = 0,
> .jumbo_frame = 0,
> - .hw_strip_crc = 0,
> + .hw_strip_crc = 1,
> },
> .txmode = {
> .mq_mode = ETH_DCB_NONE,
> diff --git a/test/test/test_link_bonding.c b/test/test/test_link_bonding.c index
> 3229660..3a1194c 100644
> --- a/test/test/test_link_bonding.c
> +++ b/test/test/test_link_bonding.c
> @@ -172,7 +172,7 @@ struct rte_eth_rxmode rx_mode = {
> .hw_vlan_strip = 1, /**< VLAN strip enabled. */
> .hw_vlan_extend = 0, /**< Extended VLAN disabled. */
> .jumbo_frame = 0, /**< Jumbo Frame Support disabled. */
> - .hw_strip_crc = 0, /**< CRC stripping by hardware disabled. */
> + .hw_strip_crc = 1, /**< CRC stripping by hardware disabled. */
> };
Comment "/**< CRC stripping by hardware disabled. */" need to be
Changed too.
Accept that, and will send v3 to fix it. Thanks for review.
Best regards,
Jeff Guo
-----Original Message-----
From: Wu, Jingjing
Sent: Wednesday, March 22, 2017 8:27 PM
To: Guo, Jia <jia.guo@intel.com>; Zhang, Helin <helin.zhang@intel.com>
Cc: dev@dpdk.org; stable@dpdk.org
Subject: RE: [dpdk-dev v2 3/3] test: enable HW CRC strip by default
> -----Original Message-----
> From: Guo, Jia
> Sent: Monday, March 20, 2017 5:58 PM
> To: Zhang, Helin <helin.zhang@intel.com>; Wu, Jingjing
> <jingjing.wu@intel.com>
> Cc: dev@dpdk.org; Guo, Jia <jia.guo@intel.com>; stable@dpdk.org
> Subject: [dpdk-dev v2 3/3] test: enable HW CRC strip by default
>
> Since VF has no ability to disable/enable HW CRC strip for non-DPDK PF
> drivers, and for most case of kernel driver default enable HW CRC
> strip, if disable HW CRC strip in test app's rxmode, VF driver will
> return fail and result the VF launch failure. So this patch default to enable HW CRC strip to let VF launch successful.
>
> Signed-off-by: Jeff Guo <jia.guo@intel.com>
> Cc: stable@dpdk.org
> ---
> test/test-pipeline/init.c | 2 +-
> test/test/test_kni.c | 2 +-
> test/test/test_link_bonding.c | 4 ++--
> test/test/test_link_bonding_mode4.c | 2 +-
> test/test/test_link_bonding_rssconf.c | 4 ++--
> test/test/test_pmd_perf.c | 2 +-
> 6 files changed, 8 insertions(+), 8 deletions(-)
>
> diff --git a/test/test-pipeline/init.c b/test/test-pipeline/init.c
> index
> aef082f..00dbc27 100644
> --- a/test/test-pipeline/init.c
> +++ b/test/test-pipeline/init.c
> @@ -105,7 +105,7 @@ static struct rte_eth_conf port_conf = {
> .hw_ip_checksum = 1, /* IP checksum offload enabled */
> .hw_vlan_filter = 0, /* VLAN filtering disabled */
> .jumbo_frame = 0, /* Jumbo Frame Support disabled */
> - .hw_strip_crc = 0, /* CRC stripped by hardware */
> + .hw_strip_crc = 1, /* CRC stripped by hardware */
> },
> .rx_adv_conf = {
> .rss_conf = {
> diff --git a/test/test/test_kni.c b/test/test/test_kni.c index
> 309741c..db17fdf
> 100644
> --- a/test/test/test_kni.c
> +++ b/test/test/test_kni.c
> @@ -92,7 +92,7 @@ static const struct rte_eth_conf port_conf = {
> .hw_ip_checksum = 0,
> .hw_vlan_filter = 0,
> .jumbo_frame = 0,
> - .hw_strip_crc = 0,
> + .hw_strip_crc = 1,
> },
> .txmode = {
> .mq_mode = ETH_DCB_NONE,
> diff --git a/test/test/test_link_bonding.c
> b/test/test/test_link_bonding.c index 3229660..3a1194c 100644
> --- a/test/test/test_link_bonding.c
> +++ b/test/test/test_link_bonding.c
> @@ -172,7 +172,7 @@ struct rte_eth_rxmode rx_mode = {
> .hw_vlan_strip = 1, /**< VLAN strip enabled. */
> .hw_vlan_extend = 0, /**< Extended VLAN disabled. */
> .jumbo_frame = 0, /**< Jumbo Frame Support disabled. */
> - .hw_strip_crc = 0, /**< CRC stripping by hardware disabled. */
> + .hw_strip_crc = 1, /**< CRC stripping by hardware disabled. */
> };
Comment "/**< CRC stripping by hardware disabled. */" need to be Changed too.
@@ -105,7 +105,7 @@ static struct rte_eth_conf port_conf = {
.hw_ip_checksum = 1, /* IP checksum offload enabled */
.hw_vlan_filter = 0, /* VLAN filtering disabled */
.jumbo_frame = 0, /* Jumbo Frame Support disabled */
- .hw_strip_crc = 0, /* CRC stripped by hardware */
+ .hw_strip_crc = 1, /* CRC stripped by hardware */
},
.rx_adv_conf = {
.rss_conf = {
@@ -92,7 +92,7 @@ static const struct rte_eth_conf port_conf = {
.hw_ip_checksum = 0,
.hw_vlan_filter = 0,
.jumbo_frame = 0,
- .hw_strip_crc = 0,
+ .hw_strip_crc = 1,
},
.txmode = {
.mq_mode = ETH_DCB_NONE,
@@ -172,7 +172,7 @@ struct rte_eth_rxmode rx_mode = {
.hw_vlan_strip = 1, /**< VLAN strip enabled. */
.hw_vlan_extend = 0, /**< Extended VLAN disabled. */
.jumbo_frame = 0, /**< Jumbo Frame Support disabled. */
- .hw_strip_crc = 0, /**< CRC stripping by hardware disabled. */
+ .hw_strip_crc = 1, /**< CRC stripping by hardware disabled. */
};
struct rte_fdir_conf fdir_conf = {
@@ -191,7 +191,7 @@ static struct rte_eth_conf default_pmd_conf = {
.hw_ip_checksum = 0, /**< IP checksum offload enabled */
.hw_vlan_filter = 0, /**< VLAN filtering disabled */
.jumbo_frame = 0, /**< Jumbo Frame Support disabled */
- .hw_strip_crc = 0, /**< CRC stripped by hardware */
+ .hw_strip_crc = 1, /**< CRC stripped by hardware */
},
.txmode = {
.mq_mode = ETH_MQ_TX_NONE,
@@ -143,7 +143,7 @@ static struct rte_eth_conf default_pmd_conf = {
.hw_ip_checksum = 0, /**< IP checksum offload enabled */
.hw_vlan_filter = 0, /**< VLAN filtering disabled */
.jumbo_frame = 0, /**< Jumbo Frame Support disabled */
- .hw_strip_crc = 0, /**< CRC stripped by hardware */
+ .hw_strip_crc = 1, /**< CRC stripped by hardware */
},
.txmode = {
.mq_mode = ETH_MQ_TX_NONE,
@@ -116,7 +116,7 @@ static struct rte_eth_conf default_pmd_conf = {
.hw_ip_checksum = 0, /**< IP checksum offload enabled */
.hw_vlan_filter = 0, /**< VLAN filtering disabled */
.jumbo_frame = 0, /**< Jumbo Frame Support disabled */
- .hw_strip_crc = 0, /**< CRC stripped by hardware */
+ .hw_strip_crc = 1, /**< CRC stripped by hardware */
},
.txmode = {
.mq_mode = ETH_MQ_TX_NONE,
@@ -133,7 +133,7 @@ static struct rte_eth_conf rss_pmd_conf = {
.hw_ip_checksum = 0, /**< IP checksum offload enabled */
.hw_vlan_filter = 0, /**< VLAN filtering disabled */
.jumbo_frame = 0, /**< Jumbo Frame Support disabled */
- .hw_strip_crc = 0, /**< CRC stripped by hardware */
+ .hw_strip_crc = 1, /**< CRC stripped by hardware */
},
.txmode = {
.mq_mode = ETH_MQ_TX_NONE,
@@ -100,7 +100,7 @@ static struct rte_eth_conf port_conf = {
.hw_vlan_strip = 0, /**< VLAN strip enabled. */
.hw_vlan_extend = 0, /**< Extended VLAN disabled. */
.jumbo_frame = 0, /**< Jumbo Frame Support disabled */
- .hw_strip_crc = 0, /**< CRC stripped by hardware */
+ .hw_strip_crc = 1, /**< CRC stripped by hardware */
.enable_scatter = 0, /**< scatter rx disabled */
},
.txmode = {