| Message ID | 1567146501-8224-1-git-send-email-anoobj@marvell.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | add OCTEON TX2 crypto PMD | expand |
Hi Akhil, Pablo, Can you review this series? Thanks, Anoob > -----Original Message----- > From: Anoob Joseph <anoobj@marvell.com> > Sent: Friday, August 30, 2019 11:58 AM > To: Akhil Goyal <akhil.goyal@nxp.com>; Pablo de Lara > <pablo.de.lara.guarch@intel.com>; Thomas Monjalon > <thomas@monjalon.net> > Cc: Anoob Joseph <anoobj@marvell.com>; Jerin Jacob Kollanukkaran > <jerinj@marvell.com>; Narayana Prasad Raju Athreya > <pathreya@marvell.com>; Ankur Dwivedi <adwivedi@marvell.com>; > Tejasree Kondoj <ktejasree@marvell.com>; dev@dpdk.org > Subject: [PATCH 00/11] add OCTEON TX2 crypto PMD > > This series introduces poll mode driver to enable crypto offload engine on > Marvell OCTEON TX2 SoC. > > Ankur Dwivedi (5): > crypto/octeontx2: add PMD skeleton > crypto/octeontx2: add device control ops > crypto/octeontx2: add hardware definitions > crypto/octeontx2: add session related functions > crypto/octeontx2: add dequeue burst > > Anoob Joseph (6): > crypto/octeontx2: add device init sequence in probe > crypto/octeontx2: add symmetric capabilities > crypto/octeontx2: add queue pair functions > crypto/octeontx2: add enqueue burst > test: add OCTEON TX2 tests > doc: add documentation for OCTEON TX2 crypto PMD > > MAINTAINERS | 7 + > app/test/meson.build | 1 + > app/test/test_cryptodev.c | 323 ++++++++ > app/test/test_cryptodev.h | 1 + > app/test/test_cryptodev_aes_test_vectors.h | 112 ++- > app/test/test_cryptodev_blockcipher.c | 7 + > app/test/test_cryptodev_blockcipher.h | 1 + > app/test/test_cryptodev_des_test_vectors.h | 12 +- > app/test/test_cryptodev_hash_test_vectors.h | 75 +- > config/common_base | 5 + > doc/guides/cryptodevs/features/octeontx2.ini | 62 ++ > doc/guides/cryptodevs/index.rst | 1 + > doc/guides/cryptodevs/octeontx2.rst | 142 ++++ > doc/guides/platform/octeontx2.rst | 3 + > drivers/common/Makefile | 5 +- > drivers/common/cpt/cpt_hw_types.h | 52 ++ > drivers/common/cpt/cpt_mcode_defines.h | 2 + > drivers/crypto/Makefile | 1 + > drivers/crypto/meson.build | 4 +- > drivers/crypto/octeontx2/Makefile | 50 ++ > drivers/crypto/octeontx2/meson.build | 34 + > drivers/crypto/octeontx2/otx2_cryptodev.c | 158 ++++ > drivers/crypto/octeontx2/otx2_cryptodev.h | 39 + > .../crypto/octeontx2/otx2_cryptodev_capabilities.c | 604 > +++++++++++++++ .../crypto/octeontx2/otx2_cryptodev_capabilities.h | > 16 + > .../crypto/octeontx2/otx2_cryptodev_hw_access.c | 225 ++++++ > .../crypto/octeontx2/otx2_cryptodev_hw_access.h | 223 ++++++ > drivers/crypto/octeontx2/otx2_cryptodev_mbox.c | 175 +++++ > drivers/crypto/octeontx2/otx2_cryptodev_mbox.h | 25 + > drivers/crypto/octeontx2/otx2_cryptodev_ops.c | 839 > +++++++++++++++++++++ > drivers/crypto/octeontx2/otx2_cryptodev_ops.h | 20 + > .../octeontx2/rte_pmd_octeontx2_crypto_version.map | 4 + > mk/rte.app.mk | 6 +- > 33 files changed, 3164 insertions(+), 70 deletions(-) create mode 100644 > doc/guides/cryptodevs/features/octeontx2.ini > create mode 100644 doc/guides/cryptodevs/octeontx2.rst > create mode 100644 drivers/crypto/octeontx2/Makefile create mode > 100644 drivers/crypto/octeontx2/meson.build > create mode 100644 drivers/crypto/octeontx2/otx2_cryptodev.c > create mode 100644 drivers/crypto/octeontx2/otx2_cryptodev.h > create mode 100644 > drivers/crypto/octeontx2/otx2_cryptodev_capabilities.c > create mode 100644 > drivers/crypto/octeontx2/otx2_cryptodev_capabilities.h > create mode 100644 > drivers/crypto/octeontx2/otx2_cryptodev_hw_access.c > create mode 100644 > drivers/crypto/octeontx2/otx2_cryptodev_hw_access.h > create mode 100644 drivers/crypto/octeontx2/otx2_cryptodev_mbox.c > create mode 100644 drivers/crypto/octeontx2/otx2_cryptodev_mbox.h > create mode 100644 drivers/crypto/octeontx2/otx2_cryptodev_ops.c > create mode 100644 drivers/crypto/octeontx2/otx2_cryptodev_ops.h > create mode 100644 > drivers/crypto/octeontx2/rte_pmd_octeontx2_crypto_version.map > > -- > 2.7.4
Hi Anoob, The series is in my pipeline for the coming week. I have given some comments on nitrox PMD. Please have a look in case they are valid for your PMD as well and send a v2. Regards, Akhil > -----Original Message----- > From: Anoob Joseph <anoobj@marvell.com> > Sent: Thursday, September 26, 2019 4:34 PM > To: Akhil Goyal <akhil.goyal@nxp.com>; Pablo de Lara > <pablo.de.lara.guarch@intel.com>; Thomas Monjalon <thomas@monjalon.net> > Cc: Jerin Jacob Kollanukkaran <jerinj@marvell.com>; Narayana Prasad Raju > Athreya <pathreya@marvell.com>; Ankur Dwivedi <adwivedi@marvell.com>; > Tejasree Kondoj <ktejasree@marvell.com>; dev@dpdk.org > Subject: RE: [PATCH 00/11] add OCTEON TX2 crypto PMD > > Hi Akhil, Pablo, > > Can you review this series? > > Thanks, > Anoob > > > -----Original Message----- > > From: Anoob Joseph <anoobj@marvell.com> > > Sent: Friday, August 30, 2019 11:58 AM > > To: Akhil Goyal <akhil.goyal@nxp.com>; Pablo de Lara > > <pablo.de.lara.guarch@intel.com>; Thomas Monjalon > > <thomas@monjalon.net> > > Cc: Anoob Joseph <anoobj@marvell.com>; Jerin Jacob Kollanukkaran > > <jerinj@marvell.com>; Narayana Prasad Raju Athreya > > <pathreya@marvell.com>; Ankur Dwivedi <adwivedi@marvell.com>; > > Tejasree Kondoj <ktejasree@marvell.com>; dev@dpdk.org > > Subject: [PATCH 00/11] add OCTEON TX2 crypto PMD > > > > This series introduces poll mode driver to enable crypto offload engine on > > Marvell OCTEON TX2 SoC. > > > > Ankur Dwivedi (5): > > crypto/octeontx2: add PMD skeleton > > crypto/octeontx2: add device control ops > > crypto/octeontx2: add hardware definitions > > crypto/octeontx2: add session related functions > > crypto/octeontx2: add dequeue burst > > > > Anoob Joseph (6): > > crypto/octeontx2: add device init sequence in probe > > crypto/octeontx2: add symmetric capabilities > > crypto/octeontx2: add queue pair functions > > crypto/octeontx2: add enqueue burst > > test: add OCTEON TX2 tests > > doc: add documentation for OCTEON TX2 crypto PMD > > > > MAINTAINERS | 7 + > > app/test/meson.build | 1 + > > app/test/test_cryptodev.c | 323 ++++++++ > > app/test/test_cryptodev.h | 1 + > > app/test/test_cryptodev_aes_test_vectors.h | 112 ++- > > app/test/test_cryptodev_blockcipher.c | 7 + > > app/test/test_cryptodev_blockcipher.h | 1 + > > app/test/test_cryptodev_des_test_vectors.h | 12 +- > > app/test/test_cryptodev_hash_test_vectors.h | 75 +- > > config/common_base | 5 + > > doc/guides/cryptodevs/features/octeontx2.ini | 62 ++ > > doc/guides/cryptodevs/index.rst | 1 + > > doc/guides/cryptodevs/octeontx2.rst | 142 ++++ > > doc/guides/platform/octeontx2.rst | 3 + > > drivers/common/Makefile | 5 +- > > drivers/common/cpt/cpt_hw_types.h | 52 ++ > > drivers/common/cpt/cpt_mcode_defines.h | 2 + > > drivers/crypto/Makefile | 1 + > > drivers/crypto/meson.build | 4 +- > > drivers/crypto/octeontx2/Makefile | 50 ++ > > drivers/crypto/octeontx2/meson.build | 34 + > > drivers/crypto/octeontx2/otx2_cryptodev.c | 158 ++++ > > drivers/crypto/octeontx2/otx2_cryptodev.h | 39 + > > .../crypto/octeontx2/otx2_cryptodev_capabilities.c | 604 > > +++++++++++++++ .../crypto/octeontx2/otx2_cryptodev_capabilities.h | > > 16 + > > .../crypto/octeontx2/otx2_cryptodev_hw_access.c | 225 ++++++ > > .../crypto/octeontx2/otx2_cryptodev_hw_access.h | 223 ++++++ > > drivers/crypto/octeontx2/otx2_cryptodev_mbox.c | 175 +++++ > > drivers/crypto/octeontx2/otx2_cryptodev_mbox.h | 25 + > > drivers/crypto/octeontx2/otx2_cryptodev_ops.c | 839 > > +++++++++++++++++++++ > > drivers/crypto/octeontx2/otx2_cryptodev_ops.h | 20 + > > .../octeontx2/rte_pmd_octeontx2_crypto_version.map | 4 + > > mk/rte.app.mk | 6 +- > > 33 files changed, 3164 insertions(+), 70 deletions(-) create mode 100644 > > doc/guides/cryptodevs/features/octeontx2.ini > > create mode 100644 doc/guides/cryptodevs/octeontx2.rst > > create mode 100644 drivers/crypto/octeontx2/Makefile create mode > > 100644 drivers/crypto/octeontx2/meson.build > > create mode 100644 drivers/crypto/octeontx2/otx2_cryptodev.c > > create mode 100644 drivers/crypto/octeontx2/otx2_cryptodev.h > > create mode 100644 > > drivers/crypto/octeontx2/otx2_cryptodev_capabilities.c > > create mode 100644 > > drivers/crypto/octeontx2/otx2_cryptodev_capabilities.h > > create mode 100644 > > drivers/crypto/octeontx2/otx2_cryptodev_hw_access.c > > create mode 100644 > > drivers/crypto/octeontx2/otx2_cryptodev_hw_access.h > > create mode 100644 drivers/crypto/octeontx2/otx2_cryptodev_mbox.c > > create mode 100644 drivers/crypto/octeontx2/otx2_cryptodev_mbox.h > > create mode 100644 drivers/crypto/octeontx2/otx2_cryptodev_ops.c > > create mode 100644 drivers/crypto/octeontx2/otx2_cryptodev_ops.h > > create mode 100644 > > drivers/crypto/octeontx2/rte_pmd_octeontx2_crypto_version.map > > > > -- > > 2.7.4