[v4,01/13] net/mlx5: add representor recognition on kernels 5.x

Message ID 1553692547-16695-2-git-send-email-viacheslavo@mellanox.com
State Accepted, archived
Delegated to: Shahaf Shuler
Headers show
Series
  • net/mlx5: add support for multiport IB devices
Related show

Checks

Context Check Description
ci/intel-Performance-Testing success Performance Testing PASS
ci/mellanox-Performance-Testing fail Performance Testing issues
ci/Intel-compilation success Compilation OK
ci/checkpatch success coding style OK

Commit Message

Viacheslav Ovsiienko March 27, 2019, 1:15 p.m.
The master device and VF representors were distinguished by
presence of port name, master device did not have one. The new Linux
kernels starting from 5.0 provide the port name for master device
and the implemented representor recognizing method does not work.
The new recognizing method is based on querying the VF number,
has been created on the base of the device.

The IFLA_NUM_VF attribute is returned by kernel if IFLA_EXT_MASK
attribute is specified in the Netlink request message.

Also the presence check of device symlink in device sysfs folder
is added to distinguish representors with sysfs based method.

Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
---
 drivers/net/mlx5/Makefile      | 10 ++++++++++
 drivers/net/mlx5/meson.build   |  4 ++++
 drivers/net/mlx5/mlx5.c        | 20 +++++++++++++++++---
 drivers/net/mlx5/mlx5.h        |  2 ++
 drivers/net/mlx5/mlx5_ethdev.c | 20 ++++++++++++++++++--
 drivers/net/mlx5/mlx5_nl.c     | 43 +++++++++++++++++++++++++++++++++++++++---
 6 files changed, 91 insertions(+), 8 deletions(-)

Patch

diff --git a/drivers/net/mlx5/Makefile b/drivers/net/mlx5/Makefile
index 9a7da18..c326494 100644
--- a/drivers/net/mlx5/Makefile
+++ b/drivers/net/mlx5/Makefile
@@ -226,6 +226,16 @@  mlx5_autoconf.h.new: $(RTE_SDK)/buildtools/auto-config-h.sh
 		enum RDMA_NLDEV_ATTR_NDEV_INDEX \
 		$(AUTOCONF_OUTPUT)
 	$Q sh -- '$<' '$@' \
+		HAVE_IFLA_NUM_VF \
+		linux/if_link.h \
+		enum IFLA_NUM_VF \
+		$(AUTOCONF_OUTPUT)
+	$Q sh -- '$<' '$@' \
+		HAVE_IFLA_EXT_MASK \
+		linux/if_link.h \
+		enum IFLA_EXT_MASK \
+		$(AUTOCONF_OUTPUT)
+	$Q sh -- '$<' '$@' \
 		HAVE_IFLA_PHYS_SWITCH_ID \
 		linux/if_link.h \
 		enum IFLA_PHYS_SWITCH_ID \
diff --git a/drivers/net/mlx5/meson.build b/drivers/net/mlx5/meson.build
index 0cf2f08..e3cb9bc 100644
--- a/drivers/net/mlx5/meson.build
+++ b/drivers/net/mlx5/meson.build
@@ -133,6 +133,10 @@  if build
 		'ETHTOOL_LINK_MODE_50000baseCR2_Full_BIT' ],
 		[ 'HAVE_ETHTOOL_LINK_MODE_100G', 'linux/ethtool.h',
 		'ETHTOOL_LINK_MODE_100000baseKR4_Full_BIT' ],
+		[ 'HAVE_IFLA_NUM_VF', 'linux/if_link.h',
+		'IFLA_NUM_VF' ],
+		[ 'HAVE_IFLA_EXT_MASK', 'linux/if_link.h',
+		'IFLA_EXT_MASK' ],
 		[ 'HAVE_IFLA_PHYS_SWITCH_ID', 'linux/if_link.h',
 		'IFLA_PHYS_SWITCH_ID' ],
 		[ 'HAVE_IFLA_PHYS_PORT_NAME', 'linux/if_link.h',
diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c
index ae4b716..de72b2f 100644
--- a/drivers/net/mlx5/mlx5.c
+++ b/drivers/net/mlx5/mlx5.c
@@ -13,7 +13,6 @@ 
 #include <errno.h>
 #include <net/if.h>
 #include <sys/mman.h>
-#include <linux/netlink.h>
 #include <linux/rtnetlink.h>
 
 /* Verbs header. */
@@ -998,9 +997,24 @@ 
 	priv->nl_socket_route =	mlx5_nl_init(NETLINK_ROUTE);
 	priv->nl_sn = 0;
 	priv->representor = !!switch_info->representor;
+	priv->master = !!switch_info->master;
 	priv->domain_id = RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID;
-	priv->representor_id =
-		switch_info->representor ? switch_info->port_name : -1;
+	/*
+	 * Currently we support single E-Switch per PF configurations
+	 * only and vport_id field contains the vport index for
+	 * associated VF, which is deduced from representor port name.
+	 * For exapmple, let's have the IB device port 10, it has
+	 * attached network device eth0, which has port name attribute
+	 * pf0vf2, we can deduce the VF number as 2, and set vport index
+	 * as 3 (2+1). This assigning schema should be changed if the
+	 * multiple E-Switch instances per PF configurations or/and PCI
+	 * subfunctions are added.
+	 */
+	priv->vport_id = switch_info->representor ?
+			 switch_info->port_name + 1 : -1;
+	/* representor_id field keeps the unmodified port/VF index. */
+	priv->representor_id = switch_info->representor ?
+			       switch_info->port_name : -1;
 	/*
 	 * Look for sibling devices in order to reuse their switch domain
 	 * if any, otherwise allocate one.
diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h
index 88ffb19..70a611f 100644
--- a/drivers/net/mlx5/mlx5.h
+++ b/drivers/net/mlx5/mlx5.h
@@ -205,7 +205,9 @@  struct mlx5_priv {
 	uint16_t mtu; /* Configured MTU. */
 	unsigned int isolated:1; /* Whether isolated mode is enabled. */
 	unsigned int representor:1; /* Device is a port representor. */
+	unsigned int master:1; /* Device is a E-Switch master. */
 	uint16_t domain_id; /* Switch domain identifier. */
+	uint16_t vport_id; /* Associated VF vport index (if any). */
 	int32_t representor_id; /* Port representor identifier. */
 	/* RX/TX queues. */
 	unsigned int rxqs_n; /* RX queues array size. */
diff --git a/drivers/net/mlx5/mlx5_ethdev.c b/drivers/net/mlx5/mlx5_ethdev.c
index 2e8a296..933839c 100644
--- a/drivers/net/mlx5/mlx5_ethdev.c
+++ b/drivers/net/mlx5/mlx5_ethdev.c
@@ -1362,8 +1362,10 @@  int mlx5_fw_version_get(struct rte_eth_dev *dev, char *fw_ver, size_t fw_size)
 		.port_name = 0,
 		.switch_id = 0,
 	};
+	DIR *dir;
 	bool port_name_set = false;
 	bool port_switch_id_set = false;
+	bool device_dir = false;
 	char c;
 	int ret;
 
@@ -1376,6 +1378,8 @@  int mlx5_fw_version_get(struct rte_eth_dev *dev, char *fw_ver, size_t fw_size)
 	      ifname);
 	MKSTR(phys_switch_id, "/sys/class/net/%s/phys_switch_id",
 	      ifname);
+	MKSTR(pci_device, "/sys/class/net/%s/device",
+	      ifname);
 
 	file = fopen(phys_port_name, "rb");
 	if (file != NULL) {
@@ -1394,9 +1398,21 @@  int mlx5_fw_version_get(struct rte_eth_dev *dev, char *fw_ver, size_t fw_size)
 		fscanf(file, "%" SCNx64 "%c", &data.switch_id, &c) == 2 &&
 		c == '\n';
 	fclose(file);
-	data.master = port_switch_id_set && !port_name_set;
-	data.representor = port_switch_id_set && port_name_set;
+	dir = opendir(pci_device);
+	if (dir != NULL) {
+		closedir(dir);
+		device_dir = true;
+	}
+	data.master = port_switch_id_set && (!port_name_set || device_dir);
+	data.representor = port_switch_id_set && port_name_set && !device_dir;
 	*info = data;
+	assert(!(data.master && data.representor));
+	if (data.master && data.representor) {
+		DRV_LOG(ERR, "ifindex %u device is recognized as master"
+			     " and as representor", ifindex);
+		rte_errno = ENODEV;
+		return -rte_errno;
+	}
 	return 0;
 }
 
diff --git a/drivers/net/mlx5/mlx5_nl.c b/drivers/net/mlx5/mlx5_nl.c
index 8a10109..58bbfed 100644
--- a/drivers/net/mlx5/mlx5_nl.c
+++ b/drivers/net/mlx5/mlx5_nl.c
@@ -65,6 +65,12 @@ 
 #endif
 
 /* These are normally found in linux/if_link.h. */
+#ifndef HAVE_IFLA_NUM_VF
+#define IFLA_NUM_VF 21
+#endif
+#ifndef HAVE_IFLA_EXT_MASK
+#define IFLA_EXT_MASK 29
+#endif
 #ifndef HAVE_IFLA_PHYS_SWITCH_ID
 #define IFLA_PHYS_SWITCH_ID 36
 #endif
@@ -837,6 +843,7 @@  struct mlx5_nl_ifindex_data {
 	size_t off = NLMSG_LENGTH(sizeof(struct ifinfomsg));
 	bool port_name_set = false;
 	bool switch_id_set = false;
+	bool num_vf_set = false;
 
 	if (nh->nlmsg_type != RTM_NEWLINK)
 		goto error;
@@ -848,6 +855,9 @@  struct mlx5_nl_ifindex_data {
 		if (ra->rta_len > nh->nlmsg_len - off)
 			goto error;
 		switch (ra->rta_type) {
+		case IFLA_NUM_VF:
+			num_vf_set = true;
+			break;
 		case IFLA_PHYS_PORT_NAME:
 			port_name_set =
 				mlx5_translate_port_name((char *)payload,
@@ -864,8 +874,20 @@  struct mlx5_nl_ifindex_data {
 		}
 		off += RTA_ALIGN(ra->rta_len);
 	}
-	info.master = switch_id_set && !port_name_set;
-	info.representor = switch_id_set && port_name_set;
+	if (switch_id_set) {
+		if (info.port_name_new) {
+			/* New representors naming schema. */
+			if (port_name_set) {
+				info.master = (info.port_name == -1);
+				info.representor = (info.port_name != -1);
+			}
+		} else {
+			/* Legacy representors naming schema. */
+			info.master = (!port_name_set || num_vf_set);
+			info.representor = port_name_set && !num_vf_set;
+		}
+	}
+	assert(!(info.master && info.representor));
 	memcpy(arg, &info, sizeof(info));
 	return 0;
 error:
@@ -893,9 +915,13 @@  struct mlx5_nl_ifindex_data {
 	struct {
 		struct nlmsghdr nh;
 		struct ifinfomsg info;
+		struct rtattr rta;
+		uint32_t extmask;
 	} req = {
 		.nh = {
-			.nlmsg_len = NLMSG_LENGTH(sizeof(req.info)),
+			.nlmsg_len = NLMSG_LENGTH
+					(sizeof(req.info) +
+					 RTA_LENGTH(sizeof(uint32_t))),
 			.nlmsg_type = RTM_GETLINK,
 			.nlmsg_flags = NLM_F_REQUEST | NLM_F_ACK,
 		},
@@ -903,11 +929,22 @@  struct mlx5_nl_ifindex_data {
 			.ifi_family = AF_UNSPEC,
 			.ifi_index = ifindex,
 		},
+		.rta = {
+			.rta_type = IFLA_EXT_MASK,
+			.rta_len = RTA_LENGTH(sizeof(int32_t)),
+		},
+		.extmask = RTE_LE32(1),
 	};
 	int ret;
 
 	ret = mlx5_nl_send(nl, &req.nh, seq);
 	if (ret >= 0)
 		ret = mlx5_nl_recv(nl, seq, mlx5_nl_switch_info_cb, info);
+	if (info->master && info->representor) {
+		DRV_LOG(ERR, "ifindex %u device is recognized as master"
+			     " and as representor", ifindex);
+		rte_errno = ENODEV;
+		ret = -rte_errno;
+	}
 	return ret;
 }