[dpdk-dev,2/3] enic: handle error packets properly
Commit Message
If the packet_error bit in the completion descriptor is set, the
remainder of the descriptor and data are invalid. PKT_RX_MAC_ERR
was set in the mbuf->ol_flags if packet_error was set and used
later to indicate an error packet. But since PKT_RX_MAC_ERR is
defined as 0, mbuf flags and packet types and length were being
misinterpreted.
Make the function enic_cq_rx_to_pkt_err_flags() return true for error
packets and use the return value instead of mbuf->ol_flags to indicate
error packets. Also remove warning for error packets and rely on
rx_error stats.
Fixes: 947d860c821f ("enic: improve Rx performance")
Signed-off-by: John Daley <johndale@cisco.com>
---
drivers/net/enic/enic_rx.c | 43 ++++++++++++++++++-------------------------
1 file changed, 18 insertions(+), 25 deletions(-)
@@ -129,13 +129,6 @@ enic_cq_rx_desc_rss_hash(struct cq_enet_rq_desc *cqrd)
return le32_to_cpu(cqrd->rss_hash);
}
-static inline uint8_t
-enic_cq_rx_desc_fcs_ok(struct cq_enet_rq_desc *cqrd)
-{
- return ((cqrd->flags & CQ_ENET_RQ_DESC_FLAGS_FCS_OK) ==
- CQ_ENET_RQ_DESC_FLAGS_FCS_OK);
-}
-
static inline uint16_t
enic_cq_rx_desc_vlan(struct cq_enet_rq_desc *cqrd)
{
@@ -150,25 +143,21 @@ enic_cq_rx_desc_n_bytes(struct cq_desc *cqd)
CQ_ENET_RQ_DESC_BYTES_WRITTEN_MASK;
}
-static inline uint64_t
-enic_cq_rx_to_pkt_err_flags(struct cq_desc *cqd)
+static inline uint8_t
+enic_cq_rx_to_pkt_err_flags(struct cq_desc *cqd, uint64_t *pkt_err_flags_out)
{
struct cq_enet_rq_desc *cqrd = (struct cq_enet_rq_desc *)cqd;
uint16_t bwflags;
+ int ret = 0;
uint64_t pkt_err_flags = 0;
bwflags = enic_cq_rx_desc_bwflags(cqrd);
-
- /* Check for packet error. Can't be more specific than MAC error */
- if (enic_cq_rx_desc_packet_error(bwflags)) {
- pkt_err_flags |= PKT_RX_MAC_ERR;
- }
-
- /* Check for bad FCS. MAC error isn't quite, but no other choice */
- if (!enic_cq_rx_desc_fcs_ok(cqrd)) {
- pkt_err_flags |= PKT_RX_MAC_ERR;
+ if (unlikely(enic_cq_rx_desc_packet_error(bwflags))) {
+ pkt_err_flags = PKT_RX_MAC_ERR;
+ ret = 1;
}
- return pkt_err_flags;
+ *pkt_err_flags_out = pkt_err_flags;
+ return ret;
}
/*
@@ -282,6 +271,7 @@ enic_recv_pkts(void *rx_queue, struct rte_mbuf **rx_pkts,
dma_addr_t dma_addr;
struct cq_desc cqd;
uint64_t ol_err_flags;
+ uint8_t packet_error;
/* Check for pkts available */
color = (cqd_ptr->type_color >> CQ_DESC_COLOR_SHIFT)
@@ -303,9 +293,9 @@ enic_recv_pkts(void *rx_queue, struct rte_mbuf **rx_pkts,
break;
}
- /* Check for FCS or packet errors */
- ol_err_flags = enic_cq_rx_to_pkt_err_flags(&cqd);
- if (ol_err_flags == 0)
+ /* A packet error means descriptor and data are untrusted */
+ packet_error = enic_cq_rx_to_pkt_err_flags(&cqd, &ol_err_flags);
+ if (!packet_error)
rx_pkt_len = enic_cq_rx_desc_n_bytes(&cqd);
else
rx_pkt_len = 0;
@@ -340,10 +330,13 @@ enic_recv_pkts(void *rx_queue, struct rte_mbuf **rx_pkts,
rxmb->pkt_len = rx_pkt_len;
rxmb->data_len = rx_pkt_len;
rxmb->port = enic->port_id;
- rxmb->packet_type = enic_cq_rx_flags_to_pkt_type(&cqd);
- rxmb->ol_flags = ol_err_flags;
- if (!ol_err_flags)
+ if (!packet_error) {
+ rxmb->packet_type = enic_cq_rx_flags_to_pkt_type(&cqd);
enic_cq_rx_to_pkt_flags(&cqd, rxmb);
+ } else {
+ rxmb->packet_type = 0;
+ rxmb->ol_flags = 0;
+ }
/* prefetch mbuf data for caller */
rte_packet_prefetch(RTE_PTR_ADD(rxmb->buf_addr,