From patchwork Wed Feb 9 22:01:27 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Yaqi Tang X-Patchwork-Id: 107134 Return-Path: X-Original-To: patchwork@inbox.dpdk.org Delivered-To: patchwork@inbox.dpdk.org Received: from mails.dpdk.org (mails.dpdk.org [217.70.189.124]) by inbox.dpdk.org (Postfix) with ESMTP id E7DE4A04A5; Wed, 9 Feb 2022 15:03:26 +0100 (CET) Received: from [217.70.189.124] (localhost [127.0.0.1]) by mails.dpdk.org (Postfix) with ESMTP id E0E8D41157; Wed, 9 Feb 2022 15:03:26 +0100 (CET) Received: from mga07.intel.com (mga07.intel.com [134.134.136.100]) by mails.dpdk.org (Postfix) with ESMTP id 2248341143 for ; Wed, 9 Feb 2022 15:03:20 +0100 (CET) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=intel.com; i=@intel.com; q=dns/txt; s=Intel; t=1644415404; x=1675951404; h=from:to:cc:subject:date:message-id:mime-version: content-transfer-encoding; bh=zRvvn4d+iYFeqRu75iZYCgiueqYcNXL7dhKNe2NNNEg=; b=SVkOgI2t2/Rj6xgZJ2C5miHQJTb5zIHE7lJKlhSp9ErzuHZBdI/WwzWg lQBwTFJrHgEooMW7twi3eQhtQfVRWXefUidYR52KaLY5GHnTB2ck2dMD0 EVqcrAF4PxldsctOME888LSEzQUpT5aG9fScGUtl0LM0ZqfeXgQkIQB4O JJ0QPq+HeOgeAPfRSj9UjpJc5nhHq0roGeiOJMoOElOkkBF1QVRojRagN +PkAKfgjY/NXL2ocBP0Dbwva9qKCrJFqzNzrZClHANWkQYjejwo7hjSor rgx0+F74do4oa6gCZZArp1FUMhauwa2Dmx/bfnuxxXr8Tb0QbCDvANuzq A==; X-IronPort-AV: E=McAfee;i="6200,9189,10252"; a="312503958" X-IronPort-AV: E=Sophos;i="5.88,355,1635231600"; d="scan'208";a="312503958" Received: from orsmga004.jf.intel.com ([10.7.209.38]) by orsmga105.jf.intel.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 09 Feb 2022 06:03:19 -0800 X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="5.88,355,1635231600"; d="scan'208";a="633225843" Received: from dpdk-yaqi.sh.intel.com ([10.67.119.205]) by orsmga004.jf.intel.com with ESMTP; 09 Feb 2022 06:03:17 -0800 From: Yaqi Tang To: dts@dpdk.org Cc: Yaqi Tang Subject: [dts][PATCH V7] test_plans/cvl_switch_filter: add test plan for cvl qinq switch filter support l4 Date: Wed, 9 Feb 2022 22:01:27 +0000 Message-Id: <20220209220127.576685-1-yaqi.tang@intel.com> X-Mailer: git-send-email 2.25.1 MIME-Version: 1.0 X-BeenThere: dts@dpdk.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: test suite reviews and discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: dts-bounces@dpdk.org CVL support l4 for QinQ switch filter in PF driver, and port can support as eth / vlan / vlan / IP / tcp|udp. Signed-off-by: Yaqi Tang Tested-by: Yaqi Tang < yaqi.tang@intel.com> --- test_plans/cvl_switch_filter_test_plan.rst | 439 +++++++++++++++++++++ 1 file changed, 439 insertions(+) diff --git a/test_plans/cvl_switch_filter_test_plan.rst b/test_plans/cvl_switch_filter_test_plan.rst index 770af996..31ed564e 100644 --- a/test_plans/cvl_switch_filter_test_plan.rst +++ b/test_plans/cvl_switch_filter_test_plan.rst @@ -4761,3 +4761,442 @@ Test case: unsupported patterns in os default package testpmd> flow list 0 check the rule not exists in the list. + +================================ +CVL Switch Filter QINQ Test Plan +================================ + +Description +=========== +CVL support l4 for QinQ switch filter in PF driver is by dst MAC + outer VLAN id + inner VLAN id + dst IP + dst port, and port can support as eth / vlan / vlan / IP / tcp|udp. +* Enable QINQ switch filter for IPv4/IPv6, IPv4 + TCP/UDP in non-pipeline mode. +* Enable QINQ switch filter for IPv6 + TCP/UDP in pipeline mode. + +Test Case +========= + +Common Steps +------------ +All the packets in the QINQ test case use below settings: +dst mac: 00:11:22:33:44:55 +dst mac change inputset: 00:11:22:33:44:66 +ipv4 src: 192.168.1.1 +ipv4 dst: 192.168.1.2 +ipv4 src change inputset: 192.168.1.3 +ipv4 dst change inputset: 192.168.1.4 +ipv6 dst: CDCD:910A:2222:5498:8475:1111:3900:2020 +ipv6 dst change inputset: CDCD:910A:2222:5498:8475:1111:3900:2023 +outer vlan tci: 2 +outer vlan tci change inputset: 1 +inner vlan tci: 1 +inner vlan tci change inputset: 2 +sport: 50 +sport change inputset: 51 +dport: 23 +dport change inputset: 22 + +#Non-pipeline mode + +Test Case 1: MAC_QINQ_IPV4 +-------------------------- +The test case enable QINQ switch filter for IPv4 in non-pipeline mode, and port can support as dst MAC + outer VLAN id + inner VLAN id + IPv4. + +Test Steps +.......... +1. Validate a rule:: + + testpmd> flow validate 0 ingress pattern eth dst is / vlan tci is / vlan tci is / ipv4 src is dst is / end actions queue index 2 / end + + Get the message:: + + Flow rule validated + +2. Create a rule and list rules:: + + testpmd> flow create 0 ingress pattern eth dst is / vlan tci is / vlan tci is / ipv4 src is dst is / end actions queue index 2 / end + + Get the message:: + + Flow rule #0 created + +3. Check the flow list:: + + testpmd> flow list 0 + + ID Group Prio Attr Rule + 0 0 0 i-- ETH VLAN VLAN IPV4 => QUEUE + +4. Send matched packet in scapy on tester, check the DUT received this packet and the action is right. + +Tester:: + + >>> sendp([Ether(dst="",type=0x8100)/Dot1Q(vlan=,type=0x8100)/Dot1Q(vlan=0x,type=0x0800)/IP(src="",dst="")/("X"*80)],iface="") + +DUT:: + + testpmd> port 0/queue 2: received 1 packets + src=A4:BF:01:4D:6F:32 - dst=00:11:22:33:44:55 - type=0x8100 - length=122 - nb_segs=1 - RSS hash=0x26878aad - RSS queue=0x2 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_NONFRAG - sw ptype: L2_ETHER_VLAN INNER_L2_ETHER_VLAN INNER_L3_IPV4 - l2_len=18 - inner_l2_len=4 - inner_l3_len=20 - Receive queue=0x2 + ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD + +5. Send mismatched packet in scapy on tester, check the DUT received this packet and the action is not right. + +Tester:: + + >>> sendp([Ether(dst="",type=0x8100)/Dot1Q(vlan=,type=0x8100)/Dot1Q(vlan=0x,type=0x0800)/IP(src="",dst="")/("X"*80)],iface="") + + >>> sendp([Ether(dst="",type=0x8100)/Dot1Q(vlan=,type=0x8100)/Dot1Q(vlan=0x,type=0x0800)/IP(src="",dst="")/("X"*80)],iface="") + + >>> sendp([Ether(dst="",type=0x8100)/Dot1Q(vlan=,type=0x8100)/Dot1Q(vlan=0x,type=0x0800)/IP(src="",dst="")/("X"*80)],iface="") + + >>> sendp([Ether(dst="",type=0x8100)/Dot1Q(vlan=,type=0x8100)/Dot1Q(vlan=0x,type=0x0800)/IP(src="",dst="")/("X"*80)],iface="") + +6. Destroy a rule and list rules:: + + testpmd> flow destroy 0 rule 0 + + Get the message:: + + Flow rule #0 destroyed + +7. Check the flow list:: + + testpmd> flow list 0 + + Check the rule not exists in the list. + Send matched packets in step 4, check the action is not right. + +Test Case 2: MAC_QINQ_IPV6 +-------------------------- +The test case enable QINQ switch filter for IPv6 in non-pipeline mode, and port can support as dst MAC + outer VLAN id + inner VLAN id + IPv6. + +Test Steps +.......... +1. Validate a rule:: + + testpmd> flow validate 0 ingress pattern eth dst is / vlan tci is / vlan tci is / ipv6 dst is / end actions rss queues 2 3 end / end + + Get the message:: + + Flow rule validated + +2. Create a rule and list rules:: + + testpmd> flow create 0 ingress pattern eth dst is / vlan tci is / vlan tci is / ipv6 dst is / end actions rss queues 2 3 end / end + + Get the message:: + + Flow rule #0 created + +3. Check the flow list:: + + testpmd> flow list 0 + + ID Group Prio Attr Rule + 0 0 0 i-- ETH VLAN VLAN IPV6 => RSS + +4. Send matched packet in scapy on tester, check the DUT received this packet and the action is right. + +Tester:: + + >>> sendp([Ether(dst="",type=0x8100)/Dot1Q(vlan=,type=0x8100)/Dot1Q(vlan=0x,type=0x0800)/IPv6(dst="")/("X"*80)],iface="") + +DUT:: + + testpmd> port 0/queue 2: received 1 packets + src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 - length=142 - nb_segs=1 - RSS hash=0xb0c13d2c - RSS queue=0x2 - hw ptype: L2_ETHER L3_IPV6_EXT_UNKNOWN L4_NONFRAG - sw ptype: L2_ETHER_VLAN INNER_L2_ETHER_VLAN INNER_L3_IPV6 - l2_len=18 - inner_l2_len=4 - inner_l3_len=40 - Receive queue=0x2 + ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD + +5. Send mismatched packet in scapy on tester, check the DUT received this packet and the action is not right. + +Tester:: + + >>> sendp([Ether(dst="",type=0x8100)/Dot1Q(vlan=,type=0x8100)/Dot1Q(vlan=0x,type=0x0800)/IPv6(dst="")/("X"*80)],iface="") + + >>> sendp([Ether(dst="",type=0x8100)/Dot1Q(vlan=,type=0x8100)/Dot1Q(vlan=0x,type=0x0800)/IPv6(dst="")/("X"*80)],iface="") + + >>> sendp([Ether(dst="",type=0x8100)/Dot1Q(vlan=,type=0x8100)/Dot1Q(vlan=0x,type=0x0800)/IPv6(dst="")/("X"*80)],iface="") + + >>> sendp([Ether(dst="",type=0x8100)/Dot1Q(vlan=,type=0x8100)/Dot1Q(vlan=0x,type=0x0800)/IPv6(dst="")/("X"*80)],iface="") + +6. Destroy a rule and list rules:: + + testpmd> flow destroy 0 rule 0 + + Get the message:: + + Flow rule #0 destroyed + +7. Check the flow list:: + + testpmd> flow list 0 + + Check the rule not exists in the list. + Send matched packets in step 4, check the action is not right. + +Test Case 3: MAC_QINQ_IPV4_UDP +------------------------------ +The test case enable QINQ switch filter for IPv4 + UDP in non-pipeline mode, and port can support as dst MAC + outer VLAN id + inner VLAN id + IPv4 + UDP. + +Test Steps +.......... +1. Validate a rule:: + + testpmd> flow validate 0 ingress pattern eth dst is / vlan tci is / vlan tci is / ipv4 / udp src is dst is / end actions queue index 2 / end + + Get the message:: + + Flow rule validated + +2. Create a rule and list rules:: + + testpmd> flow create 0 ingress pattern eth dst is / vlan tci is / vlan tci is / ipv4 / udp src is dst is / end actions queue index 2 / end + + Get the message:: + + Flow rule #0 created + +3. Check the flow list:: + + testpmd> flow list 0 + + ID Group Prio Attr Rule + 0 0 0 i-- ETH VLAN VLAN IPV4 UDP => QUEUE + +4. Send matched packet in scapy on tester, check the DUT received this packet and the action is right. + +Tester:: + + >>> sendp([Ether(dst="",type=0x8100)/Dot1Q(vlan=,type=0x8100)/Dot1Q(vlan=0x,type=0x0800)/IP()/UDP(sport=,dport=)/("X"*80)],iface="") + +DUT:: + + testpmd> port 0/queue 2: received 1 packets + src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 - length=130 - nb_segs=1 - RSS hash=0xddc4fdb3 - RSS queue=0x2 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_UDP - sw ptype: L2_ETHER_VLAN INNER_L2_ETHER_VLAN INNER_L3_IPV4 INNER_L4_UDP - l2_len=18 - inner_l2_len=4 - inner_l3_len=20 - inner_l4_len=8 - Receive queue=0x2 + ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD + +5. Send mismatched packet in scapy on tester, check the DUT received this packet and the action is not right. + +Tester:: + + >>> sendp([Ether(dst="",type=0x8100)/Dot1Q(vlan=,type=0x8100)/Dot1Q(vlan=0x,type=0x0800)/IP()/UDP(sport=,dport=)/("X"*80)],iface="") + + >>> sendp([Ether(dst="",type=0x8100)/Dot1Q(vlan=,type=0x8100)/Dot1Q(vlan=0x,type=0x0800)/IP()/UDP(sport=,dport=)/("X"*80)],iface="") + + >>> sendp([Ether(dst="",type=0x8100)/Dot1Q(vlan=,type=0x8100)/Dot1Q(vlan=0x,type=0x0800)/IP()/UDP(sport=,dport=)/("X"*80)],iface="") + + >>> sendp([Ether(dst="",type=0x8100)/Dot1Q(vlan=,type=0x8100)/Dot1Q(vlan=0x,type=0x0800)/IP()/UDP(sport=,dport=)/("X"*80)],iface="") + +6. Destroy a rule and list rules:: + + testpmd> flow destroy 0 rule 0 + + Get the message:: + + Flow rule #0 destroyed + +7. Check the flow list:: + + testpmd> flow list 0 + + Check the rule not exists in the list. + Send matched packets in step 4, check the action is not right. + +Test Case 4: MAC_QINQ_IPV4_TCP +------------------------------ +The test case enable QINQ switch filter for IPv4 + TCP in non-pipeline mode, and port can support as dst MAC + outer VLAN id + inner VLAN id + IPv4 + TCP. + +Test Steps +.......... +1. Validate a rule:: + + testpmd> flow validate 0 ingress pattern eth dst is / vlan tci is / vlan tci is / ipv4 / tcp src is dst is / end actions rss queues 4 5 end / end + + Get the message:: + + Flow rule validated + +2. Create a rule and list rules:: + + testpmd> flow create 0 ingress pattern eth dst is / vlan tci is / vlan tci is / ipv4 / tcp src is dst is / end actions rss queues 4 5 end / end + + Get the message:: + + Flow rule #0 created + +3. Check the flow list:: + + testpmd> flow list 0 + + ID Group Prio Attr Rule + 0 0 0 i-- ETH VLAN VLAN IPV4 TCP => RSS + +4. Send matched packet in scapy on tester, check the DUT received this packet and the action is right. + +Tester:: + + >>> sendp([Ether(dst="",type=0x8100)/Dot1Q(vlan=,type=0x8100)/Dot1Q(vlan=0x,type=0x0800)/IP()/TCP(sport=,dport=)/("X"*80)],iface="") + +DUT:: + + testpmd> port 0/queue 5: received 1 packets + src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 - length=142 - nb_segs=1 - RSS hash=0xddc4fdb3 - RSS queue=0x5 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_TCP - sw ptype: L2_ETHER_VLAN INNER_L2_ETHER_VLAN INNER_L3_IPV4 INNER_L4_TCP - l2_len=18 - inner_l2_len=4 - inner_l3_len=20 - inner_l4_len=20 - Receive queue=0x5 + ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD + +5. Send mismatched packet in scapy on tester, check the DUT received this packet and the action is not right. + +Tester:: + + >>> sendp([Ether(dst="",type=0x8100)/Dot1Q(vlan=,type=0x8100)/Dot1Q(vlan=0x,type=0x0800)/IP()/TCP(sport=,dport=)/("X"*80)],iface="") + + >>> sendp([Ether(dst="",type=0x8100)/Dot1Q(vlan=,type=0x8100)/Dot1Q(vlan=0x,type=0x0800)/IP()/TCP(sport=,dport=)/("X"*80)],iface="") + + >>> sendp([Ether(dst="",type=0x8100)/Dot1Q(vlan=,type=0x8100)/Dot1Q(vlan=0x,type=0x0800)/IP()/TCP(sport=,dport=)/("X"*80)],iface="") + + >>> sendp([Ether(dst="",type=0x8100)/Dot1Q(vlan=,type=0x8100)/Dot1Q(vlan=0x,type=0x0800)/IP()/TCP(sport=,dport=)/("X"*80)],iface="") + +6. Destroy a rule and list rules:: + + testpmd> flow destroy 0 rule 0 + + Get the message:: + + Flow rule #0 destroyed + +7. Check the flow list:: + + testpmd> flow list 0 + + Check the rule not exists in the list. + Send matched packets in step 4, check the action is not right. + +#Pipeline mode + +Test Case 5: MAC_QINQ_IPV6_UDP +------------------------------ +The test case enable QINQ switch filter for IPv6 + UDP in pipeline mode, and port can support as dst MAC + outer VLAN id + inner VLAN id + IPv6 + UDP. + +Test Steps +.......... +1. Validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth dst is / vlan tci is / vlan tci is / ipv6 dst is / udp src is dst is / end actions drop / end + + Get the message:: + + Flow rule validated + +2. Create a rule and list rules:: + + testpmd> flow create 0 priority 0 ingress pattern eth dst is / vlan tci is / vlan tci is / ipv6 dst is / udp src is dst is / end actions drop / end + + Get the message:: + + Flow rule #0 created + +3. Check the flow list:: + + testpmd> flow list 0 + + ID Group Prio Attr Rule + 0 0 0 i-- ETH VLAN VLAN IPV6 UDP => DROP + +4. Send matched packet in scapy on tester, check the DUT received this packet and the action is right. + +Tester:: + + >>> sendp([Ether(dst="",type=0x8100)/Dot1Q(vlan=,type=0x8100)/Dot1Q(vlan=0x,type=0x0800)/IPv6(dst="")/UDP(sport=,dport=)/("X"*80)],iface="") + +5. Send mismatched packet in scapy on tester, check the DUT received this packet and the action is not right. + + >>> sendp([Ether(dst="",type=0x8100)/Dot1Q(vlan=,type=0x8100)/Dot1Q(vlan=0x,type=0x0800)/IPv6(dst="")/UDP(sport=,dport=)/("X"*80)],iface="") + + >>> sendp([Ether(dst="",type=0x8100)/Dot1Q(vlan=,type=0x8100)/Dot1Q(vlan=0x,type=0x0800)/IPv6(dst="")/UDP(sport=,dport=)/("X"*80)],iface="") + + >>> sendp([Ether(dst="",type=0x8100)/Dot1Q(vlan=,type=0x8100)/Dot1Q(vlan=0x,type=0x0800)/IPv6(dst="")/UDP(sport=,dport=)/("X"*80)],iface="") + + >>> sendp([Ether(dst="",type=0x8100)/Dot1Q(vlan=,type=0x8100)/Dot1Q(vlan=0x,type=0x0800)/IPv6(dst="")/UDP(sport=,dport=)/("X"*80)],iface="") + +6. Destroy a rule and list rules:: + + testpmd> flow destroy 0 rule 0 + + Get the message:: + + Flow rule #0 destroyed + +7. Check the flow list:: + + testpmd> flow list 0 + + Check the rule not exists in the list. + Send matched packets in step 4, check the action is not right. + +Test Case 6: MAC_QINQ_IPV6_TCP +------------------------------ +The test case enable QINQ switch filter for IPv6 + TCP in pipeline mode, and port can support as dst MAC + outer VLAN id + inner VLAN id + IPv6 + TCP. + +Test Steps +.......... +1. Validate a rule:: + + testpmd> flow validate 0 priority 0 ingress pattern eth dst is / vlan tci is / vlan tci is / ipv6 dst is / tcp src is dst is / end actions queue index 7 / end + + Get the message:: + + Flow rule validated + +2. Create a rule and list rules:: + + testpmd> flow create 0 priority 0 ingress pattern eth dst is / vlan tci is / vlan tci is / ipv6 dst is / tcp src is dst is / end actions queue index 7 / end + + Get the message:: + + Flow rule #0 created + +3. Check the flow list:: + + testpmd> flow list 0 + + ID Group Prio Attr Rule + 0 0 0 i-- ETH VLAN VLAN IPV6 TCP => QUEUE + +4. Send matched packet in scapy on tester, check the DUT received this packet and the action is right. + +Tester:: + + >>> sendp([Ether(dst="",type=0x8100)/Dot1Q(vlan=,type=0x8100)/Dot1Q(vlan=0x,type=0x0800)/IPv6(dst="")/TCP(sport=,dport=)/("X"*80)],iface="") + +DUT:: + + testpmd> port 0/queue 7: received 1 packets + src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 - length=162 - nb_segs=1 - RSS hash=0xc5dfbe3f - RSS queue=0x7 - hw ptype: L2_ETHER L3_IPV6_EXT_UNKNOWN L4_TCP - sw ptype: L2_ETHER_VLAN INNER_L2_ETHER_VLAN INNER_L3_IPV6 INNER_L4_TCP - l2_len=18 - inner_l2_len=4 - inner_l3_len=40 - inner_l4_len=20 - Receive queue=0x7 + ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD + +5. Send mismatched packet in scapy on tester, check the DUT received this packet and the action is not right. + +Tester:: + + >>> sendp([Ether(dst="",type=0x8100)/Dot1Q(vlan=,type=0x8100)/Dot1Q(vlan=0x,type=0x0800)/IPv6(dst="")/TCP(sport=,dport=)/("X"*80)],iface="") + + >>> sendp([Ether(dst="",type=0x8100)/Dot1Q(vlan=,type=0x8100)/Dot1Q(vlan=0x,type=0x0800)/IPv6(dst="")/TCP(sport=,dport=)/("X"*80)],iface="") + + >>> sendp([Ether(dst="",type=0x8100)/Dot1Q(vlan=,type=0x8100)/Dot1Q(vlan=0x,type=0x0800)/IPv6(dst="")/TCP(sport=,dport=)/("X"*80)],iface="") + + >>> sendp([Ether(dst="",type=0x8100)/Dot1Q(vlan=,type=0x8100)/Dot1Q(vlan=0x,type=0x0800)/IPv6(dst="")/TCP(sport=,dport=)/("X"*80)],iface="") + +6. Destroy a rule and list rules:: + + testpmd> flow destroy 0 rule 0 + + Get the message:: + + Flow rule #0 destroyed + +7. Check the flow list:: + + testpmd> flow list 0 + + Check the rule not exists in the list. + Send matched packets in step 4, check the action is not right. + +