| Message ID | 20221129015805.1051611-1-hongbox.li@intel.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [V1] test_plans/pmd_test_plan: supplement the test plan | expand |
| Context | Check | Description |
|---|---|---|
| ci/Intel-dts-format-test | success | Testing OK |
| ci/Intel-dts-pylama-test | success | Testing OK |
| ci/Intel-dts-doc-test | success | Testing OK |
| ci/Intel-dts-suite-test | warning | SKIPPED |
> -----Original Message----- > From: Hongbo Li <hongbox.li@intel.com> > Sent: Tuesday, November 29, 2022 9:58 AM > To: dts@dpdk.org > Cc: Li, HongboX <hongbox.li@intel.com> > Subject: [dts][PATCH V1] test_plans/pmd_test_plan: supplement the test plan > > the case of pmd/checksum_checking only cover in testcase not in test plan. so > supplement the test plan. > > Signed-off-by: Hongbo Li <hongbox.li@intel.com> > --- > test_plans/pmd_test_plan.rst | 18 ++++++++++++++++++ > 1 file changed, 18 insertions(+) > > diff --git a/test_plans/pmd_test_plan.rst b/test_plans/pmd_test_plan.rst index > c371edb1..c1760c97 100644 > --- a/test_plans/pmd_test_plan.rst > +++ b/test_plans/pmd_test_plan.rst > @@ -73,6 +73,24 @@ Test Case: Packet Checking > which will be forwarded by the DUT. The test checks if the packets are > correctly forwarded and > if both RX and TX packet sizes match by `show port all stats` > > +Test Case: Checksum checking > +============================ > + > +1. Start testpmd with rxfreet=0 and set forward mode to csum:: > + > + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-2 -n 4 -a > 0000:18:00.0 -a 0000:1b:00.0 --file-prefix=dpdk_2179994_20221121150432 > -- -i --portmask=0x3 --enable-rx-cksum --disable-rss --rxd=1024 --txd=1024 > --rxfreet=0 > + testpmd> set fwd csum > + testpmd> start > + > +2. The tester sends 4 messages with error checksum, and check whether the > message is correctly forwarded by DUT:: > + > + sendp([Ether(dst=00:11:22:33:44:55, > + src="52:00:00:00:00:00")/IP(len=46)/UDP(chksum=0x1)/Raw(load="P"*18)], > + iface="ens9", count=4) > + > +3. Stop testpmd and check whether the l4 checksum error reported by the Rx > port is equal to 4. Could you add the expected results at step 3? > + > +4. change the value of "rxfreet"(0, 8, 16, 32, 64, 128), and start testpmd, > repeat step 1-3, check the result is same. > + > + > Test Case: Packet Checking in scalar mode > ========================================= > > -- > 2.25.1
diff --git a/test_plans/pmd_test_plan.rst b/test_plans/pmd_test_plan.rst index c371edb1..c1760c97 100644 --- a/test_plans/pmd_test_plan.rst +++ b/test_plans/pmd_test_plan.rst @@ -73,6 +73,24 @@ Test Case: Packet Checking which will be forwarded by the DUT. The test checks if the packets are correctly forwarded and if both RX and TX packet sizes match by `show port all stats` +Test Case: Checksum checking +============================ + +1. Start testpmd with rxfreet=0 and set forward mode to csum:: + + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-2 -n 4 -a 0000:18:00.0 -a 0000:1b:00.0 --file-prefix=dpdk_2179994_20221121150432 -- -i --portmask=0x3 --enable-rx-cksum --disable-rss --rxd=1024 --txd=1024 --rxfreet=0 + testpmd> set fwd csum + testpmd> start + +2. The tester sends 4 messages with error checksum, and check whether the message is correctly forwarded by DUT:: + + sendp([Ether(dst=00:11:22:33:44:55, src="52:00:00:00:00:00")/IP(len=46)/UDP(chksum=0x1)/Raw(load="P"*18)], iface="ens9", count=4) + +3. Stop testpmd and check whether the l4 checksum error reported by the Rx port is equal to 4. + +4. change the value of "rxfreet"(0, 8, 16, 32, 64, 128), and start testpmd, repeat step 1-3, check the result is same. + + Test Case: Packet Checking in scalar mode =========================================
the case of pmd/checksum_checking only cover in testcase not in test plan. so supplement the test plan. Signed-off-by: Hongbo Li <hongbox.li@intel.com> --- test_plans/pmd_test_plan.rst | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+)