diff mbox series

[V1,2/4] test_plans/ice_dcf_switch_filter: update existing negative cases to validate represented port action and port representor action

Message ID 20220930054647.545932-3-ke1.xu@intel.com (mailing list archive)
State Superseded
Headers
Series update existing cases and add new sub-cases to validate port representor action and represented port action |

Commit Message

Ke Xu Sept. 30, 2022, 5:46 a.m. UTC 
  1. Add second PF with VFs for following cases

2. Add a subcase to validate creating 'represented port' action on a representor

3. Add a subcase to validate creating 'represented port' action on a VF

4. Add a subcase to validate creating 'represented port' action to a VF

5. Add two subcases to validate creating 'represented port' action to DCFs

6. Add a subcase to validate creating 'represented port' action to a representor of another DCF

7. Add a subcase to validate creating 'port representor' action on a representor

8. Add a subcase to validate creating 'port representor' action on a VF

9. Add a subcase to validate creating 'port representor' action to a VF

10. Add a subcase to validate creating 'port representor' action to a representor

11. Add a subcase to validate creating 'port representor' action to another DCF

12. Add a subcase to validate deprecated action

13. Add	a subcase to validate using an invalid port id

Signed-off-by: Ke Xu <ke1.xu@intel.com>
---
 .../ice_dcf_switch_filter_test_plan.rst       | 518 ++++++++++++++++--
 1 file changed, 485 insertions(+), 33 deletions(-)
diff mbox series

Patch

diff --git a/test_plans/ice_dcf_switch_filter_test_plan.rst b/test_plans/ice_dcf_switch_filter_test_plan.rst
index 7eab578a..24fc6e4b 100644
--- a/test_plans/ice_dcf_switch_filter_test_plan.rst
+++ b/test_plans/ice_dcf_switch_filter_test_plan.rst
@@ -183,37 +183,45 @@  Prerequisites
      0000:18:00.0 'Device 1593' if=enp24s0f0 drv=ice unused=vfio-pci
      0000:18:00.1 'Device 1593' if=enp24s0f1 drv=ice unused=vfio-pci
 
-6. Generate 4 VFs on PF0::
+6. Generate 5 VFs on PF0 and PF1::
 
      echo 4 > /sys/bus/pci/devices/0000:18:00.0/sriov_numvfs
+     echo 4 > /sys/bus/pci/devices/0000:18:00.1/sriov_numvfs
 
      ./usertools/dpdk-devbind.py -s
      0000:18:01.0 'Ethernet Adaptive Virtual Function 1889' if=enp24s1 drv=iavf unused=vfio-pci
      0000:18:01.1 'Ethernet Adaptive Virtual Function 1889' if=enp24s1f1 drv=iavf unused=vfio-pci
      0000:18:01.2 'Ethernet Adaptive Virtual Function 1889' if=enp24s1f2 drv=iavf unused=vfio-pci
      0000:18:01.3 'Ethernet Adaptive Virtual Function 1889' if=enp24s1f3 drv=iavf unused=vfio-pci
+     0000:18:11.0 'Ethernet Adaptive Virtual Function 1889' if=enp24s2 drv=iavf unused=vfio-pci
+     0000:18:11.1 'Ethernet Adaptive Virtual Function 1889' if=enp24s2f1 drv=iavf unused=vfio-pci
+     0000:18:11.2 'Ethernet Adaptive Virtual Function 1889' if=enp24s2f2 drv=iavf unused=vfio-pci
+     0000:18:11.3 'Ethernet Adaptive Virtual Function 1889' if=enp24s2f3 drv=iavf unused=vfio-pci
 
 7. Set VF0 as trust::
 
      ip link set enp24s0f0 vf 0 trust on
+     ip link set enp24s0f1 vf 0 trust on
 
 8. Bind VFs to dpdk driver::
 
      modprobe vfio-pci
      ./usertools/dpdk-devbind.py -b vfio-pci 0000:18:01.0 0000:18:01.1 0000:18:01.2 0000:18:01.3
+     ./usertools/dpdk-devbind.py -b vfio-pci 0000:18:11.0 0000:18:11.1 0000:18:11.2 0000:18:11.3
 
-9. Launch dpdk on VF0 and VF1, and VF0 request DCF mode, representing VF1 and VF2::
+9. Launch dpdk on VF0, VF1 and VF2 of each PF, and VF0 request DCF mode, representing VF1 and VF2::
 
      ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf -n 4 \
      -a 0000:18:01.0,cap=dcf,representor=[1,2] -a 0000:18:01.1 -a 0000:18:01.2 \
+     -a 0000:18:11.0,cap=dcf,representor=[1,2] -a 0000:18:11.1 -a 0000:18:01.2 \
      -- -i
-     testpmd> set portlist 3,4
+     testpmd> set portlist 3,4,8,9
      testpmd> set fwd rxonly
      testpmd> set verbose 1
      testpmd> start
      testpmd> show port info all
 
-   check the VF0 driver is net_ice_dcf.
+   check the VF0 driver of both PF is net_ice_dcf.
 
 10. on tester side, copy the layer python file to /root::
 
@@ -2915,11 +2923,114 @@  will not hang and provide a friendly output.
 
 Test case: negative cases
 =========================
+Note: some of the error messages may be different.
 
-Subcase 1: can not create rule on vf 1
---------------------------------------
+Subcase 1: can not create to vf rule on a representor
+-----------------------------------------------------
+
+1. create rule on representor 1 which is at port 1::
+
+     testpmd> flow create 1 ingress pattern eth dst is 68:05:ca:8d:ed:a8 / ipv4 src is 192.168.0.1 dst is 192.168.0.2 tos is 4 ttl is 3 / udp src is 25 dst is 23 / end actions represented_port ethdev_port_id 1 / end
+
+   Failed to create flow, report message::
+
+     Failed to create parser engine.: Invalid argument
+
+2. check the flow list::
+
+     testpmd> flow list 1
+
+   there is no rule listed.
+
+Subcase 2: can not create to vf rule on a vf
+--------------------------------------------
+
+1. create rule on vf 1 which is at port 3::
+
+     testpmd> flow create 3 ingress pattern eth dst is 68:05:ca:8d:ed:a8 / ipv4 src is 192.168.0.1 dst is 192.168.0.2 tos is 4 ttl is 3 / udp src is 25 dst is 23 / end actions represented_port ethdev_port_id 1 / end
+
+   Failed to create flow, report message::
+
+     Failed to create parser engine.: Invalid argument
+
+2. check the flow list::
+
+     testpmd> flow list 3
+
+   there is no rule listed.
 
-1. create rule on vf 1::
+Subcase 3: can not create to vf rule to a vf
+--------------------------------------------
+
+1. create rule on vf 0 which is at port 0, to vf 1 which is at port 3::
+
+     testpmd> flow create 0 ingress pattern eth dst is 68:05:ca:8d:ed:a8 / ipv4 src is 192.168.0.1 dst is 192.168.0.2 tos is 4 ttl is 3 / udp src is 25 dst is 23 / end actions represented_port ethdev_port_id 3 / end
+
+   Failed to create flow, report message::
+
+     Failed to create parser engine.: Invalid argument
+
+2. check the flow list::
+
+     testpmd> flow list 0
+
+   there is no rule listed.
+
+Subcase 4: can not create to vf rule to self dcf
+------------------------------------------------
+
+1. create rule on vf 0 which is at port 0, to vf 1 which is at port 3::
+
+     testpmd> flow create 0 ingress pattern eth dst is 68:05:ca:8d:ed:a8 / ipv4 src is 192.168.0.1 dst is 192.168.0.2 tos is 4 ttl is 3 / udp src is 25 dst is 23 / end actions represented_port ethdev_port_id 0 / end
+
+   Failed to create flow, report message::
+
+     Failed to create parser engine.: Invalid argument
+
+2. check the flow list::
+
+     testpmd> flow list 0
+
+   there is no rule listed.
+
+Subcase 5: can not create to vf rule to another dcf
+---------------------------------------------------
+
+1. create rule on vf 0 which is at port 0, to vf 1 which is at port 3::
+
+     testpmd> flow create 0 ingress pattern eth dst is 68:05:ca:8d:ed:a8 / ipv4 src is 192.168.0.1 dst is 192.168.0.2 tos is 4 ttl is 3 / udp src is 25 dst is 23 / end actions represented_port ethdev_port_id 5 / end
+
+   Failed to create flow, report message::
+
+     Failed to create parser engine.: Invalid argument
+
+2. check the flow list::
+
+     testpmd> flow list 0
+
+   there is no rule listed.
+
+Subcase 6: can not create to vf rule to a representor of another pf
+-------------------------------------------------------------------
+
+1. create rule on vf 0 of pf 0 which is at port 0, to representor 1 of pf 1 which is at port 6::
+
+     testpmd> flow create 0 ingress pattern eth dst is 68:05:ca:8d:ed:a8 / ipv4 src is 192.168.0.1 dst is 192.168.0.2 tos is 4 ttl is 3 / udp src is 25 dst is 23 / end actions represented_port ethdev_port_id 6 / end
+
+   Failed to create flow, report message::
+
+     Failed to create parser engine.: Invalid argument
+
+2. check the flow list::
+
+     testpmd> flow list 0
+
+   there is no rule listed.
+
+Subcase 7: can not create vf original rule on a representor
+-----------------------------------------------------------
+
+1. create rule on representor 1 which is at port 1::
 
      testpmd> flow create 1 ingress pattern eth dst is 68:05:ca:8d:ed:a8 / ipv4 src is 192.168.0.1 dst is 192.168.0.2 tos is 4 ttl is 3 / udp src is 25 dst is 23 / end actions port_representor port_id 1 / end
 
@@ -2933,8 +3044,76 @@  Subcase 1: can not create rule on vf 1
 
    there is no rule listed.
 
-Subcase 2: unsupported pattern in os default package
-----------------------------------------------------
+Subcase 8: can not create vf original rule on a vf
+--------------------------------------------------
+
+1. create rule on vf 1 which is at port 3::
+
+     testpmd> flow create 3 ingress pattern eth dst is 68:05:ca:8d:ed:a8 / ipv4 src is 192.168.0.1 dst is 192.168.0.2 tos is 4 ttl is 3 / udp src is 25 dst is 23 / end actions port_representor port_id 1 / end
+
+   Failed to create flow, report message::
+
+     Failed to create parser engine.: Invalid argument
+
+2. check the flow list::
+
+     testpmd> flow list 3
+
+   there is no rule listed.
+
+Subcase 9: can not create vf original rule to a vf
+--------------------------------------------------
+
+1. create rule on vf 0 which is at port 0, to vf 1 which is at port 3::
+
+     testpmd> flow create 0 ingress pattern eth dst is 68:05:ca:8d:ed:a8 / ipv4 src is 192.168.0.1 dst is 192.168.0.2 tos is 4 ttl is 3 / udp src is 25 dst is 23 / end actions port_representor port_id 3 / end
+
+   Failed to create flow, report message::
+
+     Failed to create parser engine.: Invalid argument
+
+2. check the flow list::
+
+     testpmd> flow list 0
+
+   there is no rule listed.
+
+Subcase 10: can not create vf original rule to a representor
+------------------------------------------------------------
+
+1. create rule on vf 0 which is at port 0, to vf 1 which is at port 3::
+
+     testpmd> flow create 0 ingress pattern eth dst is 68:05:ca:8d:ed:a8 / ipv4 src is 192.168.0.1 dst is 192.168.0.2 tos is 4 ttl is 3 / udp src is 25 dst is 23 / end actions port_representor port_id 1 / end
+
+   Failed to create flow, report message::
+
+     Failed to create parser engine.: Invalid argument
+
+2. check the flow list::
+
+     testpmd> flow list 0
+
+   there is no rule listed.
+
+Subcase 11: can not create vf original rule to another dcf
+----------------------------------------------------------
+
+1. create rule on vf 0 which is at port 0, to vf 1 which is at port 3::
+
+     testpmd> flow create 0 ingress pattern eth dst is 68:05:ca:8d:ed:a8 / ipv4 src is 192.168.0.1 dst is 192.168.0.2 tos is 4 ttl is 3 / udp src is 25 dst is 23 / end actions port_representor port_id 5 / end
+
+   Failed to create flow, report message::
+
+     Failed to create parser engine.: Invalid argument
+
+2. check the flow list::
+
+     testpmd> flow list 0
+
+   there is no rule listed.
+
+Subcase 12: unsupported pattern in os default package
+-----------------------------------------------------
 
 1. load os default package and launch testpmd as step 3-8 in Prerequisites.
 
@@ -2957,8 +3136,8 @@  Subcase 2: unsupported pattern in os default package
 
    check the rule not exists in the list.
 
-Subcase 3: unsupported input set
---------------------------------
+Subcase 13: unsupported input set
+---------------------------------
 
 1. create an nvgre rule with unsupported input set field [inner tos]::
 
@@ -2974,8 +3153,8 @@  Subcase 3: unsupported input set
 
    check the rule not exists in the list.
 
-Subcase 4: duplicated rules
----------------------------
+Subcase 14: duplicated rules
+----------------------------
 
 1. create a rule::
 
@@ -2994,8 +3173,8 @@  Subcase 4: duplicated rules
 
    check only the first rule exists in the list.
 
-Subcase 5: void action
-----------------------
+Subcase 15: void action
+-----------------------
 
 1. create a rule with void action::
 
@@ -3011,8 +3190,8 @@  Subcase 5: void action
 
    check the rule not exists in the list.
 
-Subcase 6: unsupported action
------------------------------
+Subcase 16: unsupported action
+------------------------------
 
 1. create a rule with void action::
 
@@ -3028,12 +3207,47 @@  Subcase 6: unsupported action
 
    check the rule not exists in the list.
 
-Subcase 7: void input set value
--------------------------------
+Subcase 17: deprecated action
+-----------------------------
+
+1. create a rule with void action::
+
+     testpmd> flow create 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions vf id 1 / end
+
+   Failed to create flow, report message::
+
+     Invalid action type: Invalid argument
+
+2. check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+Subcase 18: invalid port id
+---------------------------
+
+1. create a rule with invalid port id 10::
+
+     testpmd> flow create 0 ingress pattern eth dst is 68:05:ca:8d:ed:a8 / ipv4 src is 192.168.0.1 dst is 192.168.0.2 tos is 4 ttl is 3 / tcp src is 25 dst is 23 / end actions represented_port ethdev_port_id 20 / end
+
+   Failed to create flow, report message::
+
+     ice_flow_create(): Failed to create flow
+     port_flow_complain(): Caught PMD error type 16 (specific action): cause: 0x7fff2c460900, Invalid ethdev_port_id: Invalid argument
+
+2. check the rule list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+Subcase 19: void input set value
+--------------------------------
 
 1. create a rule with void input set value::
 
-     testpmd> flow create 0 ingress pattern eth / ipv4 / end actions vf id 1 / end
+     testpmd> flow create 0 ingress pattern eth / ipv4 / end actions represented_port ethdev_port_id 1 / end
 
    Failed to create flow, report message::
 
@@ -3045,8 +3259,8 @@  Subcase 7: void input set value
 
    check the rule not exists in the list.
 
-Subcase 9: delete a non-existing rule
--------------------------------------
+Subcase 20: delete a non-existing rule
+--------------------------------------
 
 1. check the rule list::
 
@@ -3066,7 +3280,7 @@  Subcase 9: delete a non-existing rule
 
    check no error reports.
 
-Subcase 10: add long switch rule
+Subcase 21: add long switch rule
 --------------------------------
 
 Description: A recipe has 5 words, one of which is reserved for switch ID,
@@ -3138,6 +3352,12 @@  Subcase 1: can not create to vf rule on a representor
 
    there is no rule listed.
 
+Subcase 2: can not create to vf rule on a vf
+--------------------------------------------
+
+1. validate rule on representor 1 which is at port 3::
+
+     testpmd> flow validate 3 ingress pattern eth dst is 68:05:ca:8d:ed:a8 / ipv4 src is 192.168.0.1 dst is 192.168.0.2 tos is 4 ttl is 3 / udp src is 25 dst is 23 / end actions represented_port ethdev_port_id 1 / end
 
    get the error message::
 
@@ -3145,12 +3365,165 @@  Subcase 1: can not create to vf rule on a representor
 
 2. list the rule::
 
+     testpmd> flow list 3
+
+   there is no rule listed.
+
+Subcase 3: can not create to vf rule to a vf
+--------------------------------------------
+
+1. validate rule on vf 0 which is at port 0, to vf 1 which is at port 3::
+
+     testpmd> flow validate 0 ingress pattern eth dst is 68:05:ca:8d:ed:a8 / ipv4 src is 192.168.0.1 dst is 192.168.0.2 tos is 4 ttl is 3 / udp src is 25 dst is 23 / end actions represented_port ethdev_port_id 3 / end
+
+   get the error message::
+
+     Failed to create parser engine.: Invalid argument
+
+2. list the rule::
+
+     testpmd> flow list 0
+
+   there is no rule listed.
+
+Subcase 4: can not create to vf rule to self dcf
+------------------------------------------------
+
+1. validate rule on vf 0 which is at port 0, to vf 1 which is at port 3::
+
+     testpmd> flow validate 0 ingress pattern eth dst is 68:05:ca:8d:ed:a8 / ipv4 src is 192.168.0.1 dst is 192.168.0.2 tos is 4 ttl is 3 / udp src is 25 dst is 23 / end actions represented_port ethdev_port_id 0 / end
+
+   get the error message::
+
+     Failed to create parser engine.: Invalid argument
+
+2. list the rule::
+
+     testpmd> flow list 0
+
+   there is no rule listed.
+
+Subcase 5: can not create to vf rule to another dcf
+---------------------------------------------------
+
+1. validate rule on vf 0 which is at port 0, to vf 1 which is at port 3::
+
+     testpmd> flow validate 0 ingress pattern eth dst is 68:05:ca:8d:ed:a8 / ipv4 src is 192.168.0.1 dst is 192.168.0.2 tos is 4 ttl is 3 / udp src is 25 dst is 23 / end actions represented_port ethdev_port_id 5 / end
+
+   get the error message::
+
+     Failed to create parser engine.: Invalid argument
+
+2. list the rule::
+
+     testpmd> flow list 0
+
+   there is no rule listed.
+
+Subcase 6: can not create to vf rule to a representor of another pf
+-------------------------------------------------------------------
+
+1. validate rule on vf 0 of pf 0 which is at port 0, to representor 1 of pf 1 which is at port 6::
+
+     testpmd> flow validate 0 ingress pattern eth dst is 68:05:ca:8d:ed:a8 / ipv4 src is 192.168.0.1 dst is 192.168.0.2 tos is 4 ttl is 3 / udp src is 25 dst is 23 / end actions represented_port ethdev_port_id 6 / end
+
+   get the error message::
+
+     Failed to create parser engine.: Invalid argument
+
+2. list the rule::
+
+     testpmd> flow list 0
+
+   there is no rule listed.
+
+Subcase 7: can not create vf original rule on a representor
+-----------------------------------------------------------
+
+1. validate rule on representor 1 which is at port 1::
+
+     testpmd> flow validate 1 ingress pattern eth dst is 68:05:ca:8d:ed:a8 / ipv4 src is 192.168.0.1 dst is 192.168.0.2 tos is 4 ttl is 3 / udp src is 25 dst is 23 / end actions port_representor port_id 1 / end
+
+   Failed to create flow, report message::
+
+     Failed to create parser engine.: Invalid argument
+
+2. check the flow list::
+
      testpmd> flow list 1
 
    there is no rule listed.
 
-Subcase 2: unsupported patterns in os default
----------------------------------------------
+Subcase 8: can not create vf original rule on a vf
+--------------------------------------------------
+
+1. validate rule on vf 1 which is at port 3::
+
+     testpmd> flow validate 3 ingress pattern eth dst is 68:05:ca:8d:ed:a8 / ipv4 src is 192.168.0.1 dst is 192.168.0.2 tos is 4 ttl is 3 / udp src is 25 dst is 23 / end actions port_representor port_id 1 / end
+
+   Failed to create flow, report message::
+
+     Failed to create parser engine.: Invalid argument
+
+2. check the flow list::
+
+     testpmd> flow list 3
+
+   there is no rule listed.
+
+Subcase 9: can not create vf original rule to a vf
+--------------------------------------------------
+
+1. validate rule on vf 0 which is at port 0, to vf 1 which is at port 3::
+
+     testpmd> flow validate 0 ingress pattern eth dst is 68:05:ca:8d:ed:a8 / ipv4 src is 192.168.0.1 dst is 192.168.0.2 tos is 4 ttl is 3 / udp src is 25 dst is 23 / end actions port_representor port_id 3 / end
+
+   Failed to create flow, report message::
+
+     Failed to create parser engine.: Invalid argument
+
+2. check the flow list::
+
+     testpmd> flow list 0
+
+   there is no rule listed.
+
+Subcase 10: can not create vf original rule to a representor
+------------------------------------------------------------
+
+1. validate rule on vf 0 which is at port 0, to vf 1 which is at port 3::
+
+     testpmd> flow validate 0 ingress pattern eth dst is 68:05:ca:8d:ed:a8 / ipv4 src is 192.168.0.1 dst is 192.168.0.2 tos is 4 ttl is 3 / udp src is 25 dst is 23 / end actions port_representor port_id 1 / end
+
+   Failed to create flow, report message::
+
+     Failed to create parser engine.: Invalid argument
+
+2. check the flow list::
+
+     testpmd> flow list 0
+
+   there is no rule listed.
+
+Subcase 11: can not create vf original rule to another dcf
+----------------------------------------------------------
+
+1. validate rule on vf 0 which is at port 0, to vf 1 which is at port 3::
+
+     testpmd> flow validate 0 ingress pattern eth dst is 68:05:ca:8d:ed:a8 / ipv4 src is 192.168.0.1 dst is 192.168.0.2 tos is 4 ttl is 3 / udp src is 25 dst is 23 / end actions port_representor port_id 5 / end
+
+   Failed to create flow, report message::
+
+     Failed to create parser engine.: Invalid argument
+
+2. check the flow list::
+
+     testpmd> flow list 0
+
+   there is no rule listed.
+
+Subcase 12: unsupported patterns in os default
+----------------------------------------------
 
 1. load os default package and launch testpmd as step 3-8 in Prerequisites.
 
@@ -3173,8 +3546,8 @@  Subcase 2: unsupported patterns in os default
 
    check the rule not exists in the list.
 
-Subcase 3: unsupported input set
---------------------------------
+Subcase 13: unsupported input set
+---------------------------------
 
 1. validate an nvgre rule with unsupported input set field [inner tos]::
 
@@ -3190,8 +3563,8 @@  Subcase 3: unsupported input set
 
    check the rule not exists in the list.
 
-Subcase 4: void action
-----------------------
+Subcase 14: void action
+-----------------------
 
 1. validate a rule with void action::
 
@@ -3207,8 +3580,8 @@  Subcase 4: void action
 
    check the rule not exists in the list.
 
-Subcase 5: unsupported action
------------------------------
+Subcase 15: unsupported action
+------------------------------
 
 1. validate a rule with void action::
 
@@ -3224,7 +3597,24 @@  Subcase 5: unsupported action
 
    check the rule not exists in the list.
 
-Subcase 6: void input set value
+Subcase 16: deprecated action
+-----------------------------
+
+1. validate a rule with deprecated action::
+
+     testpmd> flow validate 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions vf id 1 / end
+
+   Failed to create flow, report message::
+
+     Invalid action type: Invalid argument
+
+2. check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+Subcase 17: void input set value
 -------------------------------
 
 1. validate a rule with void input set value::
@@ -3241,7 +3631,24 @@  Subcase 6: void input set value
 
    check the rule not exists in the list.
 
-Subcase 8: long switch rule
+Subcase 18: invalid port id
+---------------------------
+
+1. validate a rule with invalid port id 10::
+
+     testpmd> flow validate 0 ingress pattern eth dst is 68:05:ca:8d:ed:a8 / ipv4 src is 192.168.0.1 dst is 192.168.0.2 tos is 4 ttl is 3 / tcp src is 25 dst is 23 / end actions represented_port ethdev_port_id 10 / end
+
+   get the error message::
+
+     Invalid port id: Invalid argument
+
+3. check the rule list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+Subcase 19: long switch rule
 ---------------------------
 
 1. validate a rule with input set length longer than 32 bytes::
@@ -3284,6 +3691,51 @@  Subcase 1: DCF stop/DCF start
 
 4. send matched packets, port 3 can't receive the packets.
 
+Test case: VF Original action test
+==================================
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth src is 00:00:00:00:00:01 dst is 00:11:22:33:44:55 type is 0x0800 / end actions port_representor port_id 0 / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth src is 00:00:00:00:00:01 dst is 00:11:22:33:44:55 type is 0x0800 / end actions port_representor port_id 0 / end
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets::
+
+     sendp([Ether(src="00:00:00:00:00:01",dst="00:11:22:33:44:55")/IP()/Raw("x" *80)],iface="enp27s0f0",count=1)
+
+   check port 0 receive the packet.
+   send mismatched packets::
+
+     sendp([Ether(src="00:00:00:00:00:02",dst="00:11:22:33:44:55")/IP()/Raw("x" *80)],iface="enp27s0f0",count=1)
+     sendp([Ether(src="00:00:00:00:00:01",dst="00:11:22:33:44:54")/IP()/Raw("x" *80)],iface="enp27s0f0",count=1)
+     sendp([Ether(src="00:00:00:00:00:01",dst="00:11:22:33:44:55")/IPv6()/Raw("x" *80)],iface="enp27s0f0",count=1)
+
+   check the packets are not to port 0.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 0
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not to port 0.
+
 Test case: Drop action test
 ===========================