[V2,3/3] tests/asan_smoke:add ASan test suite

Message ID 20220211140920.29929-3-zhiminx.huang@intel.com (mailing list archive)
State Accepted
Headers
Series [V2,1/3] test_plans/asan_smoke_test_plan:add ASan smoke testplan |

Checks

Context Check Description
ci/Intel-dts-doc-test success Testing OK
ci/Intel-dts-suite-test success Testing OK

Commit Message

Huang, ZhiminX Feb. 11, 2022, 2:09 p.m. UTC
  add ASan test suite.

Signed-off-by: Zhimin Huang <zhiminx.huang@intel.com>
---
 tests/TestSuite_asan_smoke.py | 101 ++++++++++++++++++++++++++++++++++
 1 file changed, 101 insertions(+)
 create mode 100644 tests/TestSuite_asan_smoke.py
  

Comments

Jiale, SongX Feb. 11, 2022, 5:53 a.m. UTC | #1
> -----Original Message-----
> From: Zhimin Huang <zhiminx.huang@intel.com>
> Sent: Friday, February 11, 2022 10:09 PM
> To: dts@dpdk.org; Lin, Xueqin <xueqin.lin@intel.com>
> Cc: Huang, ZhiminX <zhiminx.huang@intel.com>
> Subject: [dts] [PATCH V2 3/3] tests/asan_smoke:add ASan test suite
> 
> add ASan test suite.
> 
> Signed-off-by: Zhimin Huang <zhiminx.huang@intel.com>

Tested-by: Jiale Song < songx.jiale@intel.com>
  
Tu, Lijuan Feb. 27, 2022, 2:34 p.m. UTC | #2
> -----Original Message-----
> From: Zhimin Huang <zhiminx.huang@intel.com>
> Sent: 2022年2月11日 22:09
> To: dts@dpdk.org; Lin, Xueqin <xueqin.lin@intel.com>
> Cc: Huang, ZhiminX <zhiminx.huang@intel.com>
> Subject: [dts] [PATCH V2 3/3] tests/asan_smoke:add ASan test suite
> 
> add ASan test suite.
> 
> Signed-off-by: Zhimin Huang <zhiminx.huang@intel.com>

Applied.
  

Patch

diff --git a/tests/TestSuite_asan_smoke.py b/tests/TestSuite_asan_smoke.py
new file mode 100644
index 00000000..b2127355
--- /dev/null
+++ b/tests/TestSuite_asan_smoke.py
@@ -0,0 +1,101 @@ 
+# BSD LICENSE
+#
+# Copyright(c) 2022 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+#   * Redistributions of source code must retain the above copyright
+#     notice, this list of conditions and the following disclaimer.
+#   * Redistributions in binary form must reproduce the above copyright
+#     notice, this list of conditions and the following disclaimer in
+#     the documentation and/or other materials provided with the
+#     distribution.
+#   * Neither the name of Intel Corporation nor the names of its
+#     contributors may be used to endorse or promote products derived
+#     from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+from .smoke_base import SmokeTest
+from framework.packet import Packet
+from framework.pmd_output import PmdOutput
+from framework.test_case import TestCase
+
+class TestASanSmoke(TestCase):
+
+    def set_up_all(self):
+        """
+        Run at the start of each test suite.
+        Generic filter Prerequistites
+        """
+        self.smoke_dut_ports = self.dut.get_ports(self.nic)
+        self.ports_pci = [self.dut.ports_info[self.smoke_dut_ports[0]]['pci']]
+        # Verify that enough ports are available
+        self.verify(len(self.smoke_dut_ports) >= 1, "Insufficient ports")
+        self.tester_port0 = self.tester.get_local_port(self.smoke_dut_ports[0])
+        self.smoke_tester_nic = self.tester.get_interface(self.tester_port0)
+        self.smoke_tester_mac = self.tester.get_mac(self.smoke_dut_ports[0])
+        self.smoke_dut_mac = self.dut.get_mac_address(self.smoke_dut_ports[0])
+        self.cores = "1S/5C/1T"
+        # check core num
+        core_list = self.dut.get_core_list(self.cores)
+        self.verify(len(core_list) >= 5, "Insufficient cores for testing")
+
+        # init Packet(), SmokeTest(), PmdOutput()
+        self.pkt = Packet()
+        self.smoke_base = SmokeTest(self)
+        self.pmd_out = PmdOutput(self.dut)
+
+        # build dpdk with ASan tool
+        self.dut.build_install_dpdk(target=self.target,
+                                    extra_options="-Dbuildtype=debug -Db_lundef=false -Db_sanitize=address")
+
+    def set_up(self):
+        """
+        Run before each test case.
+        """
+        pass
+
+    def tear_down(self):
+        """
+        Run after each test case.
+        """
+        self.pmd_out.execute_cmd("stop")
+
+    def tear_down_all(self):
+        """
+        Run after each test suite.
+        """
+        self.dut.send_expect("quit", "#")
+        self.dut.kill_all()
+        self.dut.build_install_dpdk(self.target)
+
+    def check_testpmd_status(self):
+        cmd = "ps -aux | grep testpmd | grep -v grep"
+        out = self.dut.send_expect(cmd, "#", 15, alt_session=True)
+        self.verify("testpmd" in out, "After build dpdk with ASan, start testpmd failed")
+
+    def test_rxtx_with_ASan_enable(self):
+        out = self.pmd_out.start_testpmd(cores=self.cores, ports=self.ports_pci)
+        self.check_testpmd_status()
+        self.verify(all([error_key not in out for error_key in ['heap-buffer-overflow', 'use-after-free']]),
+                    "the testpmd have error key words")
+        self.pmd_out.execute_cmd("set fwd mac")
+        self.pmd_out.execute_cmd("set verbose 1")
+        self.pmd_out.execute_cmd("start")
+        queues, stats = self.smoke_base.send_pkg_return_stats()
+        self.verify(stats['RX-packets'] != 0 and stats['RX-packets'] == stats['TX-packets'], "RX-packets: {} "
+                            "TX-packets : {}, rx tx test failed".format(stats['RX-packets'], stats['TX-packets']))
\ No newline at end of file