[V4] test_plans/cvl_switch_filter: add test plan for cvl qinq switch filter support l4
Checks
| Context |
Check |
Description |
| ci/Intel-dts-doc-test |
fail
|
Testing issues
|
| ci/Intel-dts-suite-test |
warning
|
SKIPPED
|
Commit Message
CVL support l4 for QinQ switch filter in PF driver, and port can support as eth / vlan / vlan / IP / tcp|udp.
Signed-off-by: Yaqi Tang <yaqi.tang@intel.com>
Tested-by: Yaqi Tang < yaqi.tang@intel.com>
---
test_plans/cvl_switch_filter_test_plan.rst | 490 +++++++++++++++++++++
1 file changed, 490 insertions(+)
+
Comments
Some common part need to notice as below.
> -----Original Message-----
> From: Yaqi Tang <yaqi.tang@intel.com>
> Sent: Wednesday, February 9, 2022 6:16 AM
> To: dts@dpdk.org
> Cc: Tang, Yaqi <yaqi.tang@intel.com>
> Subject: [dts][PATCH V4] test_plans/cvl_switch_filter: add test plan for cvl qinq
> switch filter support l4
>
> CVL support l4 for QinQ switch filter in PF driver, and port can support as eth /
> vlan / vlan / IP / tcp|udp.
>
> Signed-off-by: Yaqi Tang <yaqi.tang@intel.com>
> Tested-by: Yaqi Tang < yaqi.tang@intel.com>
> ---
> test_plans/cvl_switch_filter_test_plan.rst | 490 +++++++++++++++++++++
> 1 file changed, 490 insertions(+)
>
> diff --git a/test_plans/cvl_switch_filter_test_plan.rst
> b/test_plans/cvl_switch_filter_test_plan.rst
> index 770af996..031082c6 100644
> --- a/test_plans/cvl_switch_filter_test_plan.rst
> +++ b/test_plans/cvl_switch_filter_test_plan.rst
> @@ -4761,3 +4761,493 @@ Test case: unsupported patterns in os default
> package
> testpmd> flow list 0
>
> check the rule not exists in the list.
> +
> +================================
> +CVL Switch Filter QINQ Test Plan
> +================================
> +
> +Description
> +===========
> +CVL support l4 for QinQ switch filter in PF driver is by dst MAC + outer VLAN
> id + inner VLAN id + dst IP + dst port, and port can support as eth / vlan / vlan /
> IP / tcp|udp.
> +* Enable QINQ switch filter for IPv4/IPv6, IPv4 + TCP/UDP in non-pipeline
> mode.
> +* Enable QINQ switch filter for IPv6 + TCP/UDP in pipeline mode.
> +
> +Prerequisites
> +=============
> +
> +Hardware
> +--------
> +Supportted NICs: columbiaville_25g/columbiaville_100g
> +
> +Software
> +--------
> +dpdk: http://dpdk.org/git/dpdk
> +scapy: http://www.secdev.org/projects/scapy/
> +
> +General Set Up
> +--------------
> +1. Compile DPDK::
> +
> + # CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib --default-
> library=static x86_64-native-linuxapp-gcc
> + # ninja -C x86_64-native-linuxapp-gcc -j 110
> +
> +2. Get the pci device id and interface of DUT and tester.
> + For example, 0000:3b:00.0 and 0000:af:00.0 is pci device id,
> + ens785f0 and ens260f0 is interface::
> +
> + <dpdk dir># ./usertools/dpdk-devbind.py -s
> +
> + 0000:3b:00.0 'Ethernet Controller E810-C for SFP 1593' if=ens785f0 drv=ice
> unused=vfio-pci
> + 0000:af:00.0 'Ethernet Controller XXV710 for 25GbE SFP28 158b'
> if=ens260f0 drv=i40e unused=vfio-pci
> +
> +3. Bind the DUT port to dpdk::
> +
> + <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci <DUT port pci device id>
> +
cvl_switch_filter test plan already have prerequisites/hardware/software part, suggest not duplicating here.
> +Test Case
> +=========
> +
> +Common Steps
> +------------
> +1. Launch the userland ``testpmd`` application on DUT as follows::
> +
> + <dpdk build dir>/app/dpdk-testpmd <EAL options> -a <DUT port pci device
> id> -- -i
> +
> +..note::
> +
> + For <EAL options>, you can use "-c 0x6 -n 4", you can also refer to testpmd
> doc for other setings.
> + For <DUT port pci device id>, you can use "0000:3b:00.0" for this test plan.
> +
> +2. Set verbose::
> +
> + testpmd> set verbose 1
> +
> +3. Set fwd engine and start::
> +
> + testpmd> set fwd rxonly
> + testpmd> start
> +
cvl_switch_filter test plan already have above part, if not special, could not duplicate.
> +All the packets in this test plan use below settings:
Your patch is add to existed test plan, consider your description "all the packets in this test plan",
Do below parameters also suitable for other test cases in this test plan?
> +dst mac: 00:11:22:33:44:55
> +dst mac change inputset: 00:11:22:33:44:66
> +ipv4 src: 192.168.1.1
> +ipv4 dst: 192.168.1.2
> +ipv4 src change inputset: 192.168.1.3
> +ipv4 dst change inputset: 192.168.1.4
> +ipv6 dst: CDCD:910A:2222:5498:8475:1111:3900:2020
> +ipv6 dst change inputset: CDCD:910A:2222:5498:8475:1111:3900:2023
> +outer vlan tci: 2
> +outer vlan tci change inputset: 1
> +inner vlan tci: 1
> +inner vlan tci change inputset: 2
> +sport: 50
> +sport change inputset: 51
> +dport: 23
> +dport change inputset: 22
> +
> +#Non-pipeline mode
> +
> +Test Case 1: MAC_QINQ_IPV4
> +--------------------------
> +The test case enable QINQ switch filter for IPv4 in non-pipeline mode, and
> port can support as dst MAC + outer VLAN id + inner VLAN id + IPv4.
> +
> +Test Steps
> +~~~~~~~~~~
> +1. Validate a rule::
> +
> + testpmd> flow validate 0 ingress pattern eth dst is <dst mac> / vlan tci is
> <outer vlan tci> / vlan tci is <inner vlan tci> / ipv4 src is <ipv4 src> dst is <ipv4
> dst> / end actions queue index 2 / end
> +
> + Get the message::
> +
> + Flow rule validated
> +
> +2. Create a rule and list rules::
> +
> + testpmd> flow create 0 ingress pattern eth dst is <dst mac> / vlan tci is
> <outer vlan tci> / vlan tci is <inner vlan tci> / ipv4 src is <ipv4 src> dst is <ipv4
> dst> / end actions queue index 2 / end
> +
> + Get the message::
> +
> + Flow rule #0 created
> +
> +3. Check the flow list::
> +
> + testpmd> flow list 0
> +
> + ID Group Prio Attr Rule
> + 0 0 0 i-- ETH VLAN VLAN IPV4 => QUEUE
> +
> +4. Send matched packet in scapy on tester, check the DUT received this packet
> and the action is right.
> +
> +Tester::
> +
> + >>> sendp([Ether(dst="<dst mac>",type=0x8100)/Dot1Q(vlan=<outer vlan
> tci>,type=0x8100)/Dot1Q(vlan=0x<inner vlan tci>,type=0x0800)/IP(src="<ipv4
> src>",dst="<ipv4 dst>")/("X"*80)],iface="<tester interface>")
> +
> +DUT::
> +
> + testpmd> port 0/queue 2: received 1 packets
> + src=A4:BF:01:4D:6F:32 - dst=00:11:22:33:44:55 - type=0x8100 - length=122 -
> nb_segs=1 - RSS hash=0x26878aad - RSS queue=0x2 - hw ptype: L2_ETHER
> L3_IPV4_EXT_UNKNOWN L4_NONFRAG - sw ptype: L2_ETHER_VLAN
> INNER_L2_ETHER_VLAN INNER_L3_IPV4 - l2_len=18 - inner_l2_len=4 -
> inner_l3_len=20 - Receive queue=0x2
> + ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD
> RTE_MBUF_F_RX_IP_CKSUM_GOOD
> RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
> +
> +5. Send mismatched packet in scapy on tester, check the DUT received this
> packet and the action is not right.
> +
> +Tester::
> +
> + >>> sendp([Ether(dst="<dst mac change
> inputset>",type=0x8100)/Dot1Q(vlan=<outer vlan
> tci>,type=0x8100)/Dot1Q(vlan=0x<inner vlan tci>,type=0x0800)/IP(src="<ipv4
> src>",dst="<ipv4 dst>")/("X"*80)],iface="<tester interface>")
> +
> + >>> sendp([Ether(dst="<dst mac>",type=0x8100)/Dot1Q(vlan=<outer vlan
> tci change inputset>,type=0x8100)/Dot1Q(vlan=0x<inner vlan
> tci>,type=0x0800)/IP(src="<ipv4 src>",dst="<ipv4
> dst>")/("X"*80)],iface="<tester interface>")
> +
> + >>> sendp([Ether(dst="<dst mac>",type=0x8100)/Dot1Q(vlan=<outer vlan
> tci>,type=0x8100)/Dot1Q(vlan=0x<inner vlan tci change
> inputset>,type=0x0800)/IP(src="<ipv4 src>",dst="<ipv4
> dst>")/("X"*80)],iface="<tester interface>")
> +
> + >>> sendp([Ether(dst="<dst mac>",type=0x8100)/Dot1Q(vlan=<outer vlan
> tci>,type=0x8100)/Dot1Q(vlan=0x<inner vlan tci>,type=0x0800)/IP(src="<ipv4
> src change inputset>",dst="<ipv4 dst>")/("X"*80)],iface="<tester interface>")
> +
> +6. Destroy a rule and list rules::
> +
> + testpmd> flow destroy 0 rule 0
> +
> + Get the message::
> +
> + Flow rule #0 destroyed
> +
> +7. Check the flow list::
> +
> + testpmd> flow list 0
> +
> + Check the rule not exists in the list.
> + Send matched packets in step 4, check the action is not right.
> +
> +Test Case 2: MAC_QINQ_IPV6
> +--------------------------
> +The test case enable QINQ switch filter for IPv6 in non-pipeline mode, and
> port can support as dst MAC + outer VLAN id + inner VLAN id + IPv6.
> +
> +Test Steps
> +~~~~~~~~~~
> +1. Validate a rule::
> +
> + testpmd> flow validate 0 ingress pattern eth dst is <dst mac> / vlan tci is
> <outer vlan tci> / vlan tci is <inner vlan tci> / ipv6 dst is <ipv6 dst> / end actions
> rss queues 2 3 end / end
> +
> + Get the message::
> +
> + Flow rule validated
> +
> +2. Create a rule and list rules::
> +
> + testpmd> flow create 0 ingress pattern eth dst is <dst mac> / vlan tci is
> <outer vlan tci> / vlan tci is <inner vlan tci> / ipv6 dst is <ipv6 dst> / end actions
> rss queues 2 3 end / end
> +
> + Get the message::
> +
> + Flow rule #0 created
> +
> +3. Check the flow list::
> +
> + testpmd> flow list 0
> +
> + ID Group Prio Attr Rule
> + 0 0 0 i-- ETH VLAN VLAN IPV6 => RSS
> +
> +4. Send matched packet in scapy on tester, check the DUT received this packet
> and the action is right.
> +
> +Tester::
> +
> + >>> sendp([Ether(dst="<dst mac>",type=0x8100)/Dot1Q(vlan=<outer vlan
> tci>,type=0x8100)/Dot1Q(vlan=0x<inner vlan
> tci>,type=0x0800)/IPv6(dst="<ipv6 dst>")/("X"*80)],iface="<tester interface>")
> +
> +DUT::
> +
> + testpmd> port 0/queue 2: received 1 packets
> + src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 - length=142 -
> nb_segs=1 - RSS hash=0xb0c13d2c - RSS queue=0x2 - hw ptype: L2_ETHER
> L3_IPV6_EXT_UNKNOWN L4_NONFRAG - sw ptype: L2_ETHER_VLAN
> INNER_L2_ETHER_VLAN INNER_L3_IPV6 - l2_len=18 - inner_l2_len=4 -
> inner_l3_len=40 - Receive queue=0x2
> + ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD
> RTE_MBUF_F_RX_IP_CKSUM_GOOD
> RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
> +
> +5. Send mismatched packet in scapy on tester, check the DUT received this
> packet and the action is not right.
> +
> +Tester::
> +
> + >>> sendp([Ether(dst="<dst mac change
> inputset>",type=0x8100)/Dot1Q(vlan=<outer vlan
> tci>,type=0x8100)/Dot1Q(vlan=0x<inner vlan
> tci>,type=0x0800)/IPv6(dst="<ipv6 dst>")/("X"*80)],iface="<tester interface>")
> +
> + >>> sendp([Ether(dst="<dst mac>",type=0x8100)/Dot1Q(vlan=<outer vlan
> tci change inputset>,type=0x8100)/Dot1Q(vlan=0x<inner vlan
> tci>,type=0x0800)/IPv6(dst="<ipv6 dst>")/("X"*80)],iface="<tester interface>")
> +
> + >>> sendp([Ether(dst="<dst mac>",type=0x8100)/Dot1Q(vlan=<outer vlan
> tci>,type=0x8100)/Dot1Q(vlan=0x<inner vlan tci change
> inputset>,type=0x0800)/IPv6(dst="<ipv6 dst>")/("X"*80)],iface="<tester
> interface>")
> +
> + >>> sendp([Ether(dst="<dst mac>",type=0x8100)/Dot1Q(vlan=<outer vlan
> tci>,type=0x8100)/Dot1Q(vlan=0x<inner vlan
> tci>,type=0x0800)/IPv6(dst="<ipv6 dst change
> inputset>")/("X"*80)],iface="<tester interface>")
> +
> +6. Destroy a rule and list rules::
> +
> + testpmd> flow destroy 0 rule 0
> +
> + Get the message::
> +
> + Flow rule #0 destroyed
> +
> +7. Check the flow list::
> +
> + testpmd> flow list 0
> +
> + Check the rule not exists in the list.
> + Send matched packets in step 4, check the action is not right.
> +
> +Test Case 3: MAC_QINQ_IPV4_UDP
> +------------------------------
> +The test case enable QINQ switch filter for IPv4 + UDP in non-pipeline mode,
> and port can support as dst MAC + outer VLAN id + inner VLAN id + IPv4 + UDP.
> +
> +Test Steps
> +~~~~~~~~~~
> +1. Validate a rule::
> +
> + testpmd> flow validate 0 ingress pattern eth dst is <dst mac> / vlan tci is
> <outer vlan tci> / vlan tci is <inner vlan tci> / ipv4 / udp src is <sport> dst is
> <dport> / end actions queue index 2 / end
> +
> + Get the message::
> +
> + Flow rule validated
> +
> +2. Create a rule and list rules::
> +
> + testpmd> flow create 0 ingress pattern eth dst is <dst mac> / vlan tci is
> <outer vlan tci> / vlan tci is <inner vlan tci> / ipv4 / udp src is <sport> dst is
> <dport> / end actions queue index 2 / end
> +
> + Get the message::
> +
> + Flow rule #0 created
> +
> +3. Check the flow list::
> +
> + testpmd> flow list 0
> +
> + ID Group Prio Attr Rule
> + 0 0 0 i-- ETH VLAN VLAN IPV4 UDP => QUEUE
> +
> +4. Send matched packet in scapy on tester, check the DUT received this packet
> and the action is right.
> +
> +Tester::
> +
> + >>> sendp([Ether(dst="<dst mac>",type=0x8100)/Dot1Q(vlan=<outer vlan
> tci>,type=0x8100)/Dot1Q(vlan=0x<inner vlan
> tci>,type=0x0800)/IP()/UDP(sport=<sport>,dport=<dport>)/("X"*80)],iface="<te
> ster interface>")
> +
> +DUT::
> +
> + testpmd> port 0/queue 2: received 1 packets
> + src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 - length=130 -
> nb_segs=1 - RSS hash=0xddc4fdb3 - RSS queue=0x2 - hw ptype: L2_ETHER
> L3_IPV4_EXT_UNKNOWN L4_UDP - sw ptype: L2_ETHER_VLAN
> INNER_L2_ETHER_VLAN INNER_L3_IPV4 INNER_L4_UDP - l2_len=18 -
> inner_l2_len=4 - inner_l3_len=20 - inner_l4_len=8 - Receive queue=0x2
> + ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD
> RTE_MBUF_F_RX_IP_CKSUM_GOOD
> RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
> +
> +5. Send mismatched packet in scapy on tester, check the DUT received this
> packet and the action is not right.
> +
> +Tester::
> +
> + >>> sendp([Ether(dst="<dst mac change
> inputset>",type=0x8100)/Dot1Q(vlan=<outer vlan
> tci>,type=0x8100)/Dot1Q(vlan=0x<inner vlan
> tci>,type=0x0800)/IP()/UDP(sport=<sport>,dport=<dport>)/("X"*80)],iface="<te
> ster interface>")
> +
> + >>> sendp([Ether(dst="<dst mac>",type=0x8100)/Dot1Q(vlan=<outer vlan
> tci change inputset>,type=0x8100)/Dot1Q(vlan=0x<inner vlan
> tci>,type=0x0800)/IP()/UDP(sport=<sport>,dport=<dport>)/("X"*80)],iface="<te
> ster interface>")
> +
> + >>> sendp([Ether(dst="<dst mac>",type=0x8100)/Dot1Q(vlan=<outer vlan
> tci>,type=0x8100)/Dot1Q(vlan=0x<inner vlan tci change
> inputset>,type=0x0800)/IP()/UDP(sport=<sport>,dport=<dport>)/("X"*80)],iface
> ="<tester interface>")
> +
> + >>> sendp([Ether(dst="<dst mac>",type=0x8100)/Dot1Q(vlan=<outer vlan
> tci>,type=0x8100)/Dot1Q(vlan=0x<inner vlan
> tci>,type=0x0800)/IP()/UDP(sport=<sport>,dport=<dport change
> inputset>)/("X"*80)],iface="<tester interface>")
> +
> +6. Destroy a rule and list rules::
> +
> + testpmd> flow destroy 0 rule 0
> +
> + Get the message::
> +
> + Flow rule #0 destroyed
> +
> +7. Check the flow list::
> +
> + testpmd> flow list 0
> +
> + Check the rule not exists in the list.
> + Send matched packets in step 4, check the action is not right.
> +
> +Test Case 4: MAC_QINQ_IPV4_TCP
> +------------------------------
> +The test case enable QINQ switch filter for IPv4 + TCP in non-pipeline mode,
> and port can support as dst MAC + outer VLAN id + inner VLAN id + IPv4 + TCP.
> +
> +Test Steps
> +~~~~~~~~~~
> +1. Validate a rule::
> +
> + testpmd> flow validate 0 ingress pattern eth dst is <dst mac> / vlan tci is
> <outer vlan tci> / vlan tci is <inner vlan tci> / ipv4 / tcp src is <sport> dst is
> <dport> / end actions rss queues 4 5 end / end
> +
> + Get the message::
> +
> + Flow rule validated
> +
> +2. Create a rule and list rules::
> +
> + testpmd> flow create 0 ingress pattern eth dst is <dst mac> / vlan tci is
> <outer vlan tci> / vlan tci is <inner vlan tci> / ipv4 / tcp src is <sport> dst is
> <dport> / end actions rss queues 4 5 end / end
> +
> + Get the message::
> +
> + Flow rule #0 created
> +
> +3. Check the flow list::
> +
> + testpmd> flow list 0
> +
> + ID Group Prio Attr Rule
> + 0 0 0 i-- ETH VLAN VLAN IPV4 TCP => RSS
> +
> +4. Send matched packet in scapy on tester, check the DUT received this packet
> and the action is right.
> +
> +Tester::
> +
> + >>> sendp([Ether(dst="<dst mac>",type=0x8100)/Dot1Q(vlan=<outer vlan
> tci>,type=0x8100)/Dot1Q(vlan=0x<inner vlan
> tci>,type=0x0800)/IP()/TCP(sport=<sport>,dport=<dport>)/("X"*80)],iface="<tes
> ter interface>")
> +
> +DUT::
> +
> + testpmd> port 0/queue 5: received 1 packets
> + src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 - length=142 -
> nb_segs=1 - RSS hash=0xddc4fdb3 - RSS queue=0x5 - hw ptype: L2_ETHER
> L3_IPV4_EXT_UNKNOWN L4_TCP - sw ptype: L2_ETHER_VLAN
> INNER_L2_ETHER_VLAN INNER_L3_IPV4 INNER_L4_TCP - l2_len=18 -
> inner_l2_len=4 - inner_l3_len=20 - inner_l4_len=20 - Receive queue=0x5
> + ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD
> RTE_MBUF_F_RX_IP_CKSUM_GOOD
> RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
> +
> +5. Send mismatched packet in scapy on tester, check the DUT received this
> packet and the action is not right.
> +
> +Tester::
> +
> + >>> sendp([Ether(dst="<dst mac change
> inputset>",type=0x8100)/Dot1Q(vlan=<outer vlan
> tci>,type=0x8100)/Dot1Q(vlan=0x<inner vlan
> tci>,type=0x0800)/IP()/TCP(sport=<sport>,dport=<dport>)/("X"*80)],iface="<tes
> ter interface>")
> +
> + >>> sendp([Ether(dst="<dst mac>",type=0x8100)/Dot1Q(vlan=<outer vlan
> tci change inputset>,type=0x8100)/Dot1Q(vlan=0x<inner vlan
> tci>,type=0x0800)/IP()/TCP(sport=<sport>,dport=<dport>)/("X"*80)],iface="<tes
> ter interface>")
> +
> + >>> sendp([Ether(dst="<dst mac>",type=0x8100)/Dot1Q(vlan=<outer vlan
> tci>,type=0x8100)/Dot1Q(vlan=0x<inner vlan tci change
> inputset>,type=0x0800)/IP()/TCP(sport=<sport>,dport=<dport>)/("X"*80)],iface
> ="<tester interface>")
> +
> + >>> sendp([Ether(dst="<dst mac>",type=0x8100)/Dot1Q(vlan=<outer vlan
> tci>,type=0x8100)/Dot1Q(vlan=0x<inner vlan
> tci>,type=0x0800)/IP()/TCP(sport=<sport>,dport=<dport change
> inputset>)/("X"*80)],iface="<tester interface>")
> +
> +6. Destroy a rule and list rules::
> +
> + testpmd> flow destroy 0 rule 0
> +
> + Get the message::
> +
> + Flow rule #0 destroyed
> +
> +7. Check the flow list::
> +
> + testpmd> flow list 0
> +
> + Check the rule not exists in the list.
> + Send matched packets in step 4, check the action is not right.
> +
> +#Pipeline mode
> +
> +Test Case 5: MAC_QINQ_IPV6_UDP
> +------------------------------
> +The test case enable QINQ switch filter for IPv6 + UDP in pipeline mode, and
> port can support as dst MAC + outer VLAN id + inner VLAN id + IPv6 + UDP.
> +
> +Test Steps
> +~~~~~~~~~~
> +1. Validate a rule::
> +
> + testpmd> flow validate 0 priority 0 ingress pattern eth dst is <dst mac> /
> vlan tci is <outer vlan tci> / vlan tci is <inner vlan tci> / ipv6 dst is <ipv6 dst> /
> udp src is <sport> dst is <dport> / end actions drop / end
> +
> + Get the message::
> +
> + Flow rule validated
> +
> +2. Create a rule and list rules::
> +
> + testpmd> flow create 0 priority 0 ingress pattern eth dst is <dst mac> / vlan
> tci is <outer vlan tci> / vlan tci is <inner vlan tci> / ipv6 dst is <ipv6 dst> / udp
> src is <sport> dst is <dport> / end actions drop / end
> +
> + Get the message::
> +
> + Flow rule #0 created
> +
> +3. Check the flow list::
> +
> + testpmd> flow list 0
> +
> + ID Group Prio Attr Rule
> + 0 0 0 i-- ETH VLAN VLAN IPV6 UDP => DROP
> +
> +4. Send matched packet in scapy on tester, check the DUT received this packet
> and the action is right.
> +
> +Tester::
> +
> + >>> sendp([Ether(dst="<dst mac>",type=0x8100)/Dot1Q(vlan=<outer vlan
> tci>,type=0x8100)/Dot1Q(vlan=0x<inner vlan
> tci>,type=0x0800)/IPv6(dst="<ipv6
> dst>")/UDP(sport=<sport>,dport=<dport>)/("X"*80)],iface="<tester interface>")
> +
> +DUT::
> +
> +5. Send mismatched packet in scapy on tester, check the DUT received this
> packet and the action is not right.
> +
> + >>> sendp([Ether(dst="<dst mac change
> inputset>",type=0x8100)/Dot1Q(vlan=<outer vlan
> tci>,type=0x8100)/Dot1Q(vlan=0x<inner vlan
> tci>,type=0x0800)/IPv6(dst="<ipv6
> dst>")/UDP(sport=<sport>,dport=<dport>)/("X"*80)],iface="<tester interface>")
> +
> + >>> sendp([Ether(dst="<dst mac>",type=0x8100)/Dot1Q(vlan=<outer vlan
> tci change inputset>,type=0x8100)/Dot1Q(vlan=0x<inner vlan
> tci>,type=0x0800)/IPv6(dst="<ipv6
> dst>")/UDP(sport=<sport>,dport=<dport>)/("X"*80)],iface="<tester interface>")
> +
> + >>> sendp([Ether(dst="<dst mac>",type=0x8100)/Dot1Q(vlan=<outer vlan
> tci>,type=0x8100)/Dot1Q(vlan=0x<inner vlan tci change
> inputset>,type=0x0800)/IPv6(dst="<ipv6
> dst>")/UDP(sport=<sport>,dport=<dport>)/("X"*80)],iface="<tester interface>")
> +
> + >>> sendp([Ether(dst="<dst mac>",type=0x8100)/Dot1Q(vlan=<outer vlan
> tci>,type=0x8100)/Dot1Q(vlan=0x<inner vlan
> tci>,type=0x0800)/IPv6(dst="<ipv6 dst change
> inputset>")/UDP(sport=<sport>,dport=<dport change
> inputset>)/("X"*80)],iface="<tester interface>")
> +
> +6. Destroy a rule and list rules::
> +
> + testpmd> flow destroy 0 rule 0
> +
> + Get the message::
> +
> + Flow rule #0 destroyed
> +
> +7. Check the flow list::
> +
> + testpmd> flow list 0
> +
> + Check the rule not exists in the list.
> + Send matched packets in step 4, check the action is not right.
> +
> +Test Case 6: MAC_QINQ_IPV6_TCP
> +------------------------------
> +The test case enable QINQ switch filter for IPv6 + TCP in pipeline mode, and
> port can support as dst MAC + outer VLAN id + inner VLAN id + IPv6 + TCP.
> +
> +Test Steps
> +~~~~~~~~~~
> +1. Validate a rule::
> +
> + testpmd> flow validate 0 priority 0 ingress pattern eth dst is <dst mac> /
> vlan tci is <outer vlan tci> / vlan tci is <inner vlan tci> / ipv6 dst is <ipv6 dst> /
> tcp src is <sport> dst is <dport> / end actions queue index 7 / end
> +
> + Get the message::
> +
> + Flow rule validated
> +
> +2. Create a rule and list rules::
> +
> + testpmd> flow create 0 priority 0 ingress pattern eth dst is <dst mac> / vlan
> tci is <outer vlan tci> / vlan tci is <inner vlan tci> / ipv6 dst is <ipv6 dst> / tcp
> src is <sport> dst is <dport> / end actions queue index 7 / end
> +
> + Get the message::
> +
> + Flow rule #0 created
> +
> +3. Check the flow list::
> +
> + testpmd> flow list 0
> +
> + ID Group Prio Attr Rule
> + 0 0 0 i-- ETH VLAN VLAN IPV6 TCP => QUEUE
> +
> +4. Send matched packet in scapy on tester, check the DUT received this packet
> and the action is right.
> +
> +Tester::
> +
> + >>> sendp([Ether(dst="<dst mac>",type=0x8100)/Dot1Q(vlan=<outer vlan
> tci>,type=0x8100)/Dot1Q(vlan=0x<inner vlan
> tci>,type=0x0800)/IPv6(dst="<ipv6
> dst>")/TCP(sport=<sport>,dport=<dport>)/("X"*80)],iface="<tester interface>")
> +
> +DUT::
> +
> + testpmd> port 0/queue 7: received 1 packets
> + src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 - length=162 -
> nb_segs=1 - RSS hash=0xc5dfbe3f - RSS queue=0x7 - hw ptype: L2_ETHER
> L3_IPV6_EXT_UNKNOWN L4_TCP - sw ptype: L2_ETHER_VLAN
> INNER_L2_ETHER_VLAN INNER_L3_IPV6 INNER_L4_TCP - l2_len=18 -
> inner_l2_len=4 - inner_l3_len=40 - inner_l4_len=20 - Receive queue=0x7
> + ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD
> RTE_MBUF_F_RX_IP_CKSUM_GOOD
> RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
> +
> +5. Send mismatched packet in scapy on tester, check the DUT received this
> packet and the action is not right.
> +
> +Tester::
> +
> + >>> sendp([Ether(dst="<dst mac change
> inputset>",type=0x8100)/Dot1Q(vlan=<outer vlan
> tci>,type=0x8100)/Dot1Q(vlan=0x<inner vlan
> tci>,type=0x0800)/IPv6(dst="<ipv6
> dst>")/TCP(sport=<sport>,dport=<dport>)/("X"*80)],iface="<tester interface>")
> +
> + >>> sendp([Ether(dst="<dst mac>",type=0x8100)/Dot1Q(vlan=<outer vlan
> tci change inputset>,type=0x8100)/Dot1Q(vlan=0x<inner vlan
> tci>,type=0x0800)/IPv6(dst="<ipv6
> dst>")/TCP(sport=<sport>,dport=<dport>)/("X"*80)],iface="<tester interface>")
> +
> + >>> sendp([Ether(dst="<dst mac>",type=0x8100)/Dot1Q(vlan=<outer vlan
> tci>,type=0x8100)/Dot1Q(vlan=0x<inner vlan tci change
> inputset>,type=0x0800)/IPv6(dst="<ipv6
> dst>")/TCP(sport=<sport>,dport=<dport>)/("X"*80)],iface="<tester interface>")
> +
> + >>> sendp([Ether(dst="<dst mac>",type=0x8100)/Dot1Q(vlan=<outer vlan
> tci>,type=0x8100)/Dot1Q(vlan=0x<inner vlan
> tci>,type=0x0800)/IPv6(dst="<ipv6 dst change
> inputset>")/TCP(sport=<sport>,dport=<dport change
> inputset>)/("X"*80)],iface="<tester interface>")
> +
> +6. Destroy a rule and list rules::
> +
> + testpmd> flow destroy 0 rule 0
> +
> + Get the message::
> +
> + Flow rule #0 destroyed
> +
> +7. Check the flow list::
> +
> + testpmd> flow list 0
> +
> + Check the rule not exists in the list.
> + Send matched packets in step 4, check the action is not right.
> +
> +
> --
> 2.25.1
@@ -4761,3 +4761,493 @@ Test case: unsupported patterns in os default package
testpmd> flow list 0
check the rule not exists in the list.
+
+================================
+CVL Switch Filter QINQ Test Plan
+================================
+
+Description
+===========
+CVL support l4 for QinQ switch filter in PF driver is by dst MAC + outer VLAN id + inner VLAN id + dst IP + dst port, and port can support as eth / vlan / vlan / IP / tcp|udp.
+* Enable QINQ switch filter for IPv4/IPv6, IPv4 + TCP/UDP in non-pipeline mode.
+* Enable QINQ switch filter for IPv6 + TCP/UDP in pipeline mode.
+
+Prerequisites
+=============
+
+Hardware
+--------
+Supportted NICs: columbiaville_25g/columbiaville_100g
+
+Software
+--------
+dpdk: http://dpdk.org/git/dpdk
+scapy: http://www.secdev.org/projects/scapy/
+
+General Set Up
+--------------
+1. Compile DPDK::
+
+ # CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib --default-library=static x86_64-native-linuxapp-gcc
+ # ninja -C x86_64-native-linuxapp-gcc -j 110
+
+2. Get the pci device id and interface of DUT and tester.
+ For example, 0000:3b:00.0 and 0000:af:00.0 is pci device id,
+ ens785f0 and ens260f0 is interface::
+
+ <dpdk dir># ./usertools/dpdk-devbind.py -s
+
+ 0000:3b:00.0 'Ethernet Controller E810-C for SFP 1593' if=ens785f0 drv=ice unused=vfio-pci
+ 0000:af:00.0 'Ethernet Controller XXV710 for 25GbE SFP28 158b' if=ens260f0 drv=i40e unused=vfio-pci
+
+3. Bind the DUT port to dpdk::
+
+ <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci <DUT port pci device id>
+
+Test Case
+=========
+
+Common Steps
+------------
+1. Launch the userland ``testpmd`` application on DUT as follows::
+
+ <dpdk build dir>/app/dpdk-testpmd <EAL options> -a <DUT port pci device id> -- -i
+
+..note::
+
+ For <EAL options>, you can use "-c 0x6 -n 4", you can also refer to testpmd doc for other setings.
+ For <DUT port pci device id>, you can use "0000:3b:00.0" for this test plan.
+
+2. Set verbose::
+
+ testpmd> set verbose 1
+
+3. Set fwd engine and start::
+
+ testpmd> set fwd rxonly
+ testpmd> start
+
+All the packets in this test plan use below settings:
+dst mac: 00:11:22:33:44:55
+dst mac change inputset: 00:11:22:33:44:66
+ipv4 src: 192.168.1.1
+ipv4 dst: 192.168.1.2
+ipv4 src change inputset: 192.168.1.3
+ipv4 dst change inputset: 192.168.1.4
+ipv6 dst: CDCD:910A:2222:5498:8475:1111:3900:2020
+ipv6 dst change inputset: CDCD:910A:2222:5498:8475:1111:3900:2023
+outer vlan tci: 2
+outer vlan tci change inputset: 1
+inner vlan tci: 1
+inner vlan tci change inputset: 2
+sport: 50
+sport change inputset: 51
+dport: 23
+dport change inputset: 22
+
+#Non-pipeline mode
+
+Test Case 1: MAC_QINQ_IPV4
+--------------------------
+The test case enable QINQ switch filter for IPv4 in non-pipeline mode, and port can support as dst MAC + outer VLAN id + inner VLAN id + IPv4.
+
+Test Steps
+~~~~~~~~~~
+1. Validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth dst is <dst mac> / vlan tci is <outer vlan tci> / vlan tci is <inner vlan tci> / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions queue index 2 / end
+
+ Get the message::
+
+ Flow rule validated
+
+2. Create a rule and list rules::
+
+ testpmd> flow create 0 ingress pattern eth dst is <dst mac> / vlan tci is <outer vlan tci> / vlan tci is <inner vlan tci> / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions queue index 2 / end
+
+ Get the message::
+
+ Flow rule #0 created
+
+3. Check the flow list::
+
+ testpmd> flow list 0
+
+ ID Group Prio Attr Rule
+ 0 0 0 i-- ETH VLAN VLAN IPV4 => QUEUE
+
+4. Send matched packet in scapy on tester, check the DUT received this packet and the action is right.
+
+Tester::
+
+ >>> sendp([Ether(dst="<dst mac>",type=0x8100)/Dot1Q(vlan=<outer vlan tci>,type=0x8100)/Dot1Q(vlan=0x<inner vlan tci>,type=0x0800)/IP(src="<ipv4 src>",dst="<ipv4 dst>")/("X"*80)],iface="<tester interface>")
+
+DUT::
+
+ testpmd> port 0/queue 2: received 1 packets
+ src=A4:BF:01:4D:6F:32 - dst=00:11:22:33:44:55 - type=0x8100 - length=122 - nb_segs=1 - RSS hash=0x26878aad - RSS queue=0x2 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_NONFRAG - sw ptype: L2_ETHER_VLAN INNER_L2_ETHER_VLAN INNER_L3_IPV4 - l2_len=18 - inner_l2_len=4 - inner_l3_len=20 - Receive queue=0x2
+ ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
+
+5. Send mismatched packet in scapy on tester, check the DUT received this packet and the action is not right.
+
+Tester::
+
+ >>> sendp([Ether(dst="<dst mac change inputset>",type=0x8100)/Dot1Q(vlan=<outer vlan tci>,type=0x8100)/Dot1Q(vlan=0x<inner vlan tci>,type=0x0800)/IP(src="<ipv4 src>",dst="<ipv4 dst>")/("X"*80)],iface="<tester interface>")
+
+ >>> sendp([Ether(dst="<dst mac>",type=0x8100)/Dot1Q(vlan=<outer vlan tci change inputset>,type=0x8100)/Dot1Q(vlan=0x<inner vlan tci>,type=0x0800)/IP(src="<ipv4 src>",dst="<ipv4 dst>")/("X"*80)],iface="<tester interface>")
+
+ >>> sendp([Ether(dst="<dst mac>",type=0x8100)/Dot1Q(vlan=<outer vlan tci>,type=0x8100)/Dot1Q(vlan=0x<inner vlan tci change inputset>,type=0x0800)/IP(src="<ipv4 src>",dst="<ipv4 dst>")/("X"*80)],iface="<tester interface>")
+
+ >>> sendp([Ether(dst="<dst mac>",type=0x8100)/Dot1Q(vlan=<outer vlan tci>,type=0x8100)/Dot1Q(vlan=0x<inner vlan tci>,type=0x0800)/IP(src="<ipv4 src change inputset>",dst="<ipv4 dst>")/("X"*80)],iface="<tester interface>")
+
+6. Destroy a rule and list rules::
+
+ testpmd> flow destroy 0 rule 0
+
+ Get the message::
+
+ Flow rule #0 destroyed
+
+7. Check the flow list::
+
+ testpmd> flow list 0
+
+ Check the rule not exists in the list.
+ Send matched packets in step 4, check the action is not right.
+
+Test Case 2: MAC_QINQ_IPV6
+--------------------------
+The test case enable QINQ switch filter for IPv6 in non-pipeline mode, and port can support as dst MAC + outer VLAN id + inner VLAN id + IPv6.
+
+Test Steps
+~~~~~~~~~~
+1. Validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth dst is <dst mac> / vlan tci is <outer vlan tci> / vlan tci is <inner vlan tci> / ipv6 dst is <ipv6 dst> / end actions rss queues 2 3 end / end
+
+ Get the message::
+
+ Flow rule validated
+
+2. Create a rule and list rules::
+
+ testpmd> flow create 0 ingress pattern eth dst is <dst mac> / vlan tci is <outer vlan tci> / vlan tci is <inner vlan tci> / ipv6 dst is <ipv6 dst> / end actions rss queues 2 3 end / end
+
+ Get the message::
+
+ Flow rule #0 created
+
+3. Check the flow list::
+
+ testpmd> flow list 0
+
+ ID Group Prio Attr Rule
+ 0 0 0 i-- ETH VLAN VLAN IPV6 => RSS
+
+4. Send matched packet in scapy on tester, check the DUT received this packet and the action is right.
+
+Tester::
+
+ >>> sendp([Ether(dst="<dst mac>",type=0x8100)/Dot1Q(vlan=<outer vlan tci>,type=0x8100)/Dot1Q(vlan=0x<inner vlan tci>,type=0x0800)/IPv6(dst="<ipv6 dst>")/("X"*80)],iface="<tester interface>")
+
+DUT::
+
+ testpmd> port 0/queue 2: received 1 packets
+ src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 - length=142 - nb_segs=1 - RSS hash=0xb0c13d2c - RSS queue=0x2 - hw ptype: L2_ETHER L3_IPV6_EXT_UNKNOWN L4_NONFRAG - sw ptype: L2_ETHER_VLAN INNER_L2_ETHER_VLAN INNER_L3_IPV6 - l2_len=18 - inner_l2_len=4 - inner_l3_len=40 - Receive queue=0x2
+ ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
+
+5. Send mismatched packet in scapy on tester, check the DUT received this packet and the action is not right.
+
+Tester::
+
+ >>> sendp([Ether(dst="<dst mac change inputset>",type=0x8100)/Dot1Q(vlan=<outer vlan tci>,type=0x8100)/Dot1Q(vlan=0x<inner vlan tci>,type=0x0800)/IPv6(dst="<ipv6 dst>")/("X"*80)],iface="<tester interface>")
+
+ >>> sendp([Ether(dst="<dst mac>",type=0x8100)/Dot1Q(vlan=<outer vlan tci change inputset>,type=0x8100)/Dot1Q(vlan=0x<inner vlan tci>,type=0x0800)/IPv6(dst="<ipv6 dst>")/("X"*80)],iface="<tester interface>")
+
+ >>> sendp([Ether(dst="<dst mac>",type=0x8100)/Dot1Q(vlan=<outer vlan tci>,type=0x8100)/Dot1Q(vlan=0x<inner vlan tci change inputset>,type=0x0800)/IPv6(dst="<ipv6 dst>")/("X"*80)],iface="<tester interface>")
+
+ >>> sendp([Ether(dst="<dst mac>",type=0x8100)/Dot1Q(vlan=<outer vlan tci>,type=0x8100)/Dot1Q(vlan=0x<inner vlan tci>,type=0x0800)/IPv6(dst="<ipv6 dst change inputset>")/("X"*80)],iface="<tester interface>")
+
+6. Destroy a rule and list rules::
+
+ testpmd> flow destroy 0 rule 0
+
+ Get the message::
+
+ Flow rule #0 destroyed
+
+7. Check the flow list::
+
+ testpmd> flow list 0
+
+ Check the rule not exists in the list.
+ Send matched packets in step 4, check the action is not right.
+
+Test Case 3: MAC_QINQ_IPV4_UDP
+------------------------------
+The test case enable QINQ switch filter for IPv4 + UDP in non-pipeline mode, and port can support as dst MAC + outer VLAN id + inner VLAN id + IPv4 + UDP.
+
+Test Steps
+~~~~~~~~~~
+1. Validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth dst is <dst mac> / vlan tci is <outer vlan tci> / vlan tci is <inner vlan tci> / ipv4 / udp src is <sport> dst is <dport> / end actions queue index 2 / end
+
+ Get the message::
+
+ Flow rule validated
+
+2. Create a rule and list rules::
+
+ testpmd> flow create 0 ingress pattern eth dst is <dst mac> / vlan tci is <outer vlan tci> / vlan tci is <inner vlan tci> / ipv4 / udp src is <sport> dst is <dport> / end actions queue index 2 / end
+
+ Get the message::
+
+ Flow rule #0 created
+
+3. Check the flow list::
+
+ testpmd> flow list 0
+
+ ID Group Prio Attr Rule
+ 0 0 0 i-- ETH VLAN VLAN IPV4 UDP => QUEUE
+
+4. Send matched packet in scapy on tester, check the DUT received this packet and the action is right.
+
+Tester::
+
+ >>> sendp([Ether(dst="<dst mac>",type=0x8100)/Dot1Q(vlan=<outer vlan tci>,type=0x8100)/Dot1Q(vlan=0x<inner vlan tci>,type=0x0800)/IP()/UDP(sport=<sport>,dport=<dport>)/("X"*80)],iface="<tester interface>")
+
+DUT::
+
+ testpmd> port 0/queue 2: received 1 packets
+ src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 - length=130 - nb_segs=1 - RSS hash=0xddc4fdb3 - RSS queue=0x2 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_UDP - sw ptype: L2_ETHER_VLAN INNER_L2_ETHER_VLAN INNER_L3_IPV4 INNER_L4_UDP - l2_len=18 - inner_l2_len=4 - inner_l3_len=20 - inner_l4_len=8 - Receive queue=0x2
+ ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
+
+5. Send mismatched packet in scapy on tester, check the DUT received this packet and the action is not right.
+
+Tester::
+
+ >>> sendp([Ether(dst="<dst mac change inputset>",type=0x8100)/Dot1Q(vlan=<outer vlan tci>,type=0x8100)/Dot1Q(vlan=0x<inner vlan tci>,type=0x0800)/IP()/UDP(sport=<sport>,dport=<dport>)/("X"*80)],iface="<tester interface>")
+
+ >>> sendp([Ether(dst="<dst mac>",type=0x8100)/Dot1Q(vlan=<outer vlan tci change inputset>,type=0x8100)/Dot1Q(vlan=0x<inner vlan tci>,type=0x0800)/IP()/UDP(sport=<sport>,dport=<dport>)/("X"*80)],iface="<tester interface>")
+
+ >>> sendp([Ether(dst="<dst mac>",type=0x8100)/Dot1Q(vlan=<outer vlan tci>,type=0x8100)/Dot1Q(vlan=0x<inner vlan tci change inputset>,type=0x0800)/IP()/UDP(sport=<sport>,dport=<dport>)/("X"*80)],iface="<tester interface>")
+
+ >>> sendp([Ether(dst="<dst mac>",type=0x8100)/Dot1Q(vlan=<outer vlan tci>,type=0x8100)/Dot1Q(vlan=0x<inner vlan tci>,type=0x0800)/IP()/UDP(sport=<sport>,dport=<dport change inputset>)/("X"*80)],iface="<tester interface>")
+
+6. Destroy a rule and list rules::
+
+ testpmd> flow destroy 0 rule 0
+
+ Get the message::
+
+ Flow rule #0 destroyed
+
+7. Check the flow list::
+
+ testpmd> flow list 0
+
+ Check the rule not exists in the list.
+ Send matched packets in step 4, check the action is not right.
+
+Test Case 4: MAC_QINQ_IPV4_TCP
+------------------------------
+The test case enable QINQ switch filter for IPv4 + TCP in non-pipeline mode, and port can support as dst MAC + outer VLAN id + inner VLAN id + IPv4 + TCP.
+
+Test Steps
+~~~~~~~~~~
+1. Validate a rule::
+
+ testpmd> flow validate 0 ingress pattern eth dst is <dst mac> / vlan tci is <outer vlan tci> / vlan tci is <inner vlan tci> / ipv4 / tcp src is <sport> dst is <dport> / end actions rss queues 4 5 end / end
+
+ Get the message::
+
+ Flow rule validated
+
+2. Create a rule and list rules::
+
+ testpmd> flow create 0 ingress pattern eth dst is <dst mac> / vlan tci is <outer vlan tci> / vlan tci is <inner vlan tci> / ipv4 / tcp src is <sport> dst is <dport> / end actions rss queues 4 5 end / end
+
+ Get the message::
+
+ Flow rule #0 created
+
+3. Check the flow list::
+
+ testpmd> flow list 0
+
+ ID Group Prio Attr Rule
+ 0 0 0 i-- ETH VLAN VLAN IPV4 TCP => RSS
+
+4. Send matched packet in scapy on tester, check the DUT received this packet and the action is right.
+
+Tester::
+
+ >>> sendp([Ether(dst="<dst mac>",type=0x8100)/Dot1Q(vlan=<outer vlan tci>,type=0x8100)/Dot1Q(vlan=0x<inner vlan tci>,type=0x0800)/IP()/TCP(sport=<sport>,dport=<dport>)/("X"*80)],iface="<tester interface>")
+
+DUT::
+
+ testpmd> port 0/queue 5: received 1 packets
+ src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 - length=142 - nb_segs=1 - RSS hash=0xddc4fdb3 - RSS queue=0x5 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_TCP - sw ptype: L2_ETHER_VLAN INNER_L2_ETHER_VLAN INNER_L3_IPV4 INNER_L4_TCP - l2_len=18 - inner_l2_len=4 - inner_l3_len=20 - inner_l4_len=20 - Receive queue=0x5
+ ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
+
+5. Send mismatched packet in scapy on tester, check the DUT received this packet and the action is not right.
+
+Tester::
+
+ >>> sendp([Ether(dst="<dst mac change inputset>",type=0x8100)/Dot1Q(vlan=<outer vlan tci>,type=0x8100)/Dot1Q(vlan=0x<inner vlan tci>,type=0x0800)/IP()/TCP(sport=<sport>,dport=<dport>)/("X"*80)],iface="<tester interface>")
+
+ >>> sendp([Ether(dst="<dst mac>",type=0x8100)/Dot1Q(vlan=<outer vlan tci change inputset>,type=0x8100)/Dot1Q(vlan=0x<inner vlan tci>,type=0x0800)/IP()/TCP(sport=<sport>,dport=<dport>)/("X"*80)],iface="<tester interface>")
+
+ >>> sendp([Ether(dst="<dst mac>",type=0x8100)/Dot1Q(vlan=<outer vlan tci>,type=0x8100)/Dot1Q(vlan=0x<inner vlan tci change inputset>,type=0x0800)/IP()/TCP(sport=<sport>,dport=<dport>)/("X"*80)],iface="<tester interface>")
+
+ >>> sendp([Ether(dst="<dst mac>",type=0x8100)/Dot1Q(vlan=<outer vlan tci>,type=0x8100)/Dot1Q(vlan=0x<inner vlan tci>,type=0x0800)/IP()/TCP(sport=<sport>,dport=<dport change inputset>)/("X"*80)],iface="<tester interface>")
+
+6. Destroy a rule and list rules::
+
+ testpmd> flow destroy 0 rule 0
+
+ Get the message::
+
+ Flow rule #0 destroyed
+
+7. Check the flow list::
+
+ testpmd> flow list 0
+
+ Check the rule not exists in the list.
+ Send matched packets in step 4, check the action is not right.
+
+#Pipeline mode
+
+Test Case 5: MAC_QINQ_IPV6_UDP
+------------------------------
+The test case enable QINQ switch filter for IPv6 + UDP in pipeline mode, and port can support as dst MAC + outer VLAN id + inner VLAN id + IPv6 + UDP.
+
+Test Steps
+~~~~~~~~~~
+1. Validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth dst is <dst mac> / vlan tci is <outer vlan tci> / vlan tci is <inner vlan tci> / ipv6 dst is <ipv6 dst> / udp src is <sport> dst is <dport> / end actions drop / end
+
+ Get the message::
+
+ Flow rule validated
+
+2. Create a rule and list rules::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth dst is <dst mac> / vlan tci is <outer vlan tci> / vlan tci is <inner vlan tci> / ipv6 dst is <ipv6 dst> / udp src is <sport> dst is <dport> / end actions drop / end
+
+ Get the message::
+
+ Flow rule #0 created
+
+3. Check the flow list::
+
+ testpmd> flow list 0
+
+ ID Group Prio Attr Rule
+ 0 0 0 i-- ETH VLAN VLAN IPV6 UDP => DROP
+
+4. Send matched packet in scapy on tester, check the DUT received this packet and the action is right.
+
+Tester::
+
+ >>> sendp([Ether(dst="<dst mac>",type=0x8100)/Dot1Q(vlan=<outer vlan tci>,type=0x8100)/Dot1Q(vlan=0x<inner vlan tci>,type=0x0800)/IPv6(dst="<ipv6 dst>")/UDP(sport=<sport>,dport=<dport>)/("X"*80)],iface="<tester interface>")
+
+DUT::
+
+5. Send mismatched packet in scapy on tester, check the DUT received this packet and the action is not right.
+
+ >>> sendp([Ether(dst="<dst mac change inputset>",type=0x8100)/Dot1Q(vlan=<outer vlan tci>,type=0x8100)/Dot1Q(vlan=0x<inner vlan tci>,type=0x0800)/IPv6(dst="<ipv6 dst>")/UDP(sport=<sport>,dport=<dport>)/("X"*80)],iface="<tester interface>")
+
+ >>> sendp([Ether(dst="<dst mac>",type=0x8100)/Dot1Q(vlan=<outer vlan tci change inputset>,type=0x8100)/Dot1Q(vlan=0x<inner vlan tci>,type=0x0800)/IPv6(dst="<ipv6 dst>")/UDP(sport=<sport>,dport=<dport>)/("X"*80)],iface="<tester interface>")
+
+ >>> sendp([Ether(dst="<dst mac>",type=0x8100)/Dot1Q(vlan=<outer vlan tci>,type=0x8100)/Dot1Q(vlan=0x<inner vlan tci change inputset>,type=0x0800)/IPv6(dst="<ipv6 dst>")/UDP(sport=<sport>,dport=<dport>)/("X"*80)],iface="<tester interface>")
+
+ >>> sendp([Ether(dst="<dst mac>",type=0x8100)/Dot1Q(vlan=<outer vlan tci>,type=0x8100)/Dot1Q(vlan=0x<inner vlan tci>,type=0x0800)/IPv6(dst="<ipv6 dst change inputset>")/UDP(sport=<sport>,dport=<dport change inputset>)/("X"*80)],iface="<tester interface>")
+
+6. Destroy a rule and list rules::
+
+ testpmd> flow destroy 0 rule 0
+
+ Get the message::
+
+ Flow rule #0 destroyed
+
+7. Check the flow list::
+
+ testpmd> flow list 0
+
+ Check the rule not exists in the list.
+ Send matched packets in step 4, check the action is not right.
+
+Test Case 6: MAC_QINQ_IPV6_TCP
+------------------------------
+The test case enable QINQ switch filter for IPv6 + TCP in pipeline mode, and port can support as dst MAC + outer VLAN id + inner VLAN id + IPv6 + TCP.
+
+Test Steps
+~~~~~~~~~~
+1. Validate a rule::
+
+ testpmd> flow validate 0 priority 0 ingress pattern eth dst is <dst mac> / vlan tci is <outer vlan tci> / vlan tci is <inner vlan tci> / ipv6 dst is <ipv6 dst> / tcp src is <sport> dst is <dport> / end actions queue index 7 / end
+
+ Get the message::
+
+ Flow rule validated
+
+2. Create a rule and list rules::
+
+ testpmd> flow create 0 priority 0 ingress pattern eth dst is <dst mac> / vlan tci is <outer vlan tci> / vlan tci is <inner vlan tci> / ipv6 dst is <ipv6 dst> / tcp src is <sport> dst is <dport> / end actions queue index 7 / end
+
+ Get the message::
+
+ Flow rule #0 created
+
+3. Check the flow list::
+
+ testpmd> flow list 0
+
+ ID Group Prio Attr Rule
+ 0 0 0 i-- ETH VLAN VLAN IPV6 TCP => QUEUE
+
+4. Send matched packet in scapy on tester, check the DUT received this packet and the action is right.
+
+Tester::
+
+ >>> sendp([Ether(dst="<dst mac>",type=0x8100)/Dot1Q(vlan=<outer vlan tci>,type=0x8100)/Dot1Q(vlan=0x<inner vlan tci>,type=0x0800)/IPv6(dst="<ipv6 dst>")/TCP(sport=<sport>,dport=<dport>)/("X"*80)],iface="<tester interface>")
+
+DUT::
+
+ testpmd> port 0/queue 7: received 1 packets
+ src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 - length=162 - nb_segs=1 - RSS hash=0xc5dfbe3f - RSS queue=0x7 - hw ptype: L2_ETHER L3_IPV6_EXT_UNKNOWN L4_TCP - sw ptype: L2_ETHER_VLAN INNER_L2_ETHER_VLAN INNER_L3_IPV6 INNER_L4_TCP - l2_len=18 - inner_l2_len=4 - inner_l3_len=40 - inner_l4_len=20 - Receive queue=0x7
+ ol_flags: RTE_MBUF_F_RX_RSS_HASH RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD
+
+5. Send mismatched packet in scapy on tester, check the DUT received this packet and the action is not right.
+
+Tester::
+
+ >>> sendp([Ether(dst="<dst mac change inputset>",type=0x8100)/Dot1Q(vlan=<outer vlan tci>,type=0x8100)/Dot1Q(vlan=0x<inner vlan tci>,type=0x0800)/IPv6(dst="<ipv6 dst>")/TCP(sport=<sport>,dport=<dport>)/("X"*80)],iface="<tester interface>")
+
+ >>> sendp([Ether(dst="<dst mac>",type=0x8100)/Dot1Q(vlan=<outer vlan tci change inputset>,type=0x8100)/Dot1Q(vlan=0x<inner vlan tci>,type=0x0800)/IPv6(dst="<ipv6 dst>")/TCP(sport=<sport>,dport=<dport>)/("X"*80)],iface="<tester interface>")
+
+ >>> sendp([Ether(dst="<dst mac>",type=0x8100)/Dot1Q(vlan=<outer vlan tci>,type=0x8100)/Dot1Q(vlan=0x<inner vlan tci change inputset>,type=0x0800)/IPv6(dst="<ipv6 dst>")/TCP(sport=<sport>,dport=<dport>)/("X"*80)],iface="<tester interface>")
+
+ >>> sendp([Ether(dst="<dst mac>",type=0x8100)/Dot1Q(vlan=<outer vlan tci>,type=0x8100)/Dot1Q(vlan=0x<inner vlan tci>,type=0x0800)/IPv6(dst="<ipv6 dst change inputset>")/TCP(sport=<sport>,dport=<dport change inputset>)/("X"*80)],iface="<tester interface>")
+
+6. Destroy a rule and list rules::
+
+ testpmd> flow destroy 0 rule 0
+
+ Get the message::
+
+ Flow rule #0 destroyed
+
+7. Check the flow list::
+
+ testpmd> flow list 0
+
+ Check the rule not exists in the list.
+ Send matched packets in step 4, check the action is not right.
+