@@ -94,14 +94,6 @@ def dts_parse_param(config, section):
parameters = config.get(section, 'parameters').split(':')
drivername = config.get(section, 'drivername').split('=')[-1]
- # get the build method, default is makefile
- try:
- buildtype = config.get(section, 'build_type').split('=')[-1]
- except:
- buildtype = 'meson'
- buildtype = buildtype.lower()
- settings.save_global_setting(settings.HOST_BUILD_TYPE_SETTING, buildtype)
-
driver = drivername.split(':')
if len(driver) == 2:
drivername = driver[0]
@@ -237,9 +237,7 @@ class Dut(Crb):
if use_shared_lib == 'true' and shared_lib_path and 'Virt' not in str(self):
eal_str = eal_str + ' -d {} '.format(shared_lib_path)
rx_mode = settings.load_global_setting(settings.DPDK_RXMODE_SETTING)
- build_type = settings.load_global_setting(settings.HOST_BUILD_TYPE_SETTING)
- if build_type == 'meson' and ('other_eal_param' not in config or
- 'force-max-simd-bitwidth' not in config['other_eal_param']):
+ if 'other_eal_param' not in config or 'force-max-simd-bitwidth' not in config['other_eal_param']:
if rx_mode == 'novector':
eal_str = eal_str + ' --force-max-simd-bitwidth=64 '
elif rx_mode == 'sse':
@@ -38,7 +38,6 @@ from .logger import getLogger
from .settings import (
DPDK_RXMODE_SETTING,
DRIVERS,
- HOST_BUILD_TYPE_SETTING,
HOST_DRIVER_MODE_SETTING,
HOST_DRIVER_SETTING,
HOST_SHARED_LIB_PATH,
@@ -71,10 +70,6 @@ class DPDKdut(Dut):
Set hugepage on DUT and install modules required by DPDK.
Configure default ixgbe PMD function.
"""
- # get apps name of current build type
- self.build_type = load_global_setting(HOST_BUILD_TYPE_SETTING)
- if self.build_type not in self.apps_name_conf:
- raise Exception('please config the apps name in app_name.cfg of build type:%s' % self.build_type)
self.target = target
self.set_toolchain(target)
@@ -88,7 +83,7 @@ class DPDKdut(Dut):
self.set_driver_specific_configurations(drivername)
- self.apps_name = self.apps_name_conf[self.build_type]
+ self.apps_name = self.apps_name_conf['meson']
# use the dut target directory instead of 'target' string in app name
for app in self.apps_name:
cur_app_path = self.apps_name[app].replace('target', self.target)
@@ -197,61 +192,24 @@ class DPDKdut(Dut):
"""
Set default RX/TX PMD function,
the rx mode scalar/full/novector are supported dynamically since DPDK 20.11,
- The DPDK version should be <=20.08 when compiling DPDK by makefile to use these rx modes,
Rx mode avx512 is only supported in DPDK 20.11 and later version.
"""
-
mode = load_global_setting(DPDK_RXMODE_SETTING)
- build_type = load_global_setting(HOST_BUILD_TYPE_SETTING)
- if build_type == 'makefile':
- if mode == 'scalar':
- self.set_build_options({'RTE_LIBRTE_I40E_INC_VECTOR': 'n',
- 'RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC': 'y'})
- elif mode == 'full':
- self.set_build_options({'RTE_LIBRTE_I40E_INC_VECTOR': 'n',
- 'RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC': 'n'})
- elif mode == 'novector':
- self.set_build_options({'RTE_IXGBE_INC_VECTOR': 'n',
- 'RTE_LIBRTE_I40E_INC_VECTOR': 'n'})
- elif mode == 'avx512':
- self.logger.warning(RED('*********AVX512 is not supported by makefile!!!********'))
- else:
- if mode == 'avx512':
- out = self.send_expect('lscpu | grep avx512', '#')
- if 'avx512f' not in out or 'no-avx512f' in out:
- self.logger.warning(RED('*********The DUT CPU do not support AVX512 test!!!********'))
- self.logger.warning(RED('*********Now set the rx_mode to default!!!**********'))
- save_global_setting(DPDK_RXMODE_SETTING, 'default')
+ if mode == 'avx512':
+ out = self.send_expect('lscpu | grep avx512', '#')
+ if 'avx512f' not in out or 'no-avx512f' in out:
+ self.logger.warning(RED('*********The DUT CPU do not support AVX512 test!!!********'))
+ self.logger.warning(RED('*********Now set the rx_mode to default!!!**********'))
+ save_global_setting(DPDK_RXMODE_SETTING, 'default')
def set_package(self, pkg_name="", patch_list=[]):
self.package = pkg_name
self.patches = patch_list
def set_build_options(self, config_parms, config_file=''):
- build_type = load_global_setting(HOST_BUILD_TYPE_SETTING)
- set_build_options = getattr(self, 'set_build_options_%s' % (build_type))
+ set_build_options = getattr(self, 'set_build_options_meson')
set_build_options(config_parms, config_file)
- def set_build_options_makefile(self, config_parms, config_file=''):
- """
- Set dpdk build options of makefile
- """
- if len(config_parms) == 0:
- return;
- if config_file == '':
- config_file = 'config/common_base'
-
- for key in config_parms.keys():
- value = config_parms[key]
- if isinstance(value, int):
- self.send_expect("sed -i -e 's/CONFIG_%s=.*$/CONFIG_%s=%d/' %s" % (key, key, value, config_file), "# ")
- else:
- if value == '':
- value = 'y'
- elif len(value) > 1:
- value = '\\"%s\\"' % value
- self.send_expect("sed -i -e 's/CONFIG_%s=.*$/CONFIG_%s=%s/' %s" % (key, key, value, config_file), "# ")
-
def set_build_options_meson(self, config_parms, config_file=''):
"""
Set dpdk build options of meson
@@ -296,8 +254,7 @@ class DPDKdut(Dut):
kernel_driver = self.nic.default_driver
nic_name = self.nic.name
- build_type = load_global_setting(HOST_BUILD_TYPE_SETTING)
- build_install_dpdk = getattr(self, 'build_install_dpdk_%s_%s' % (self.get_os_type(), build_type))
+ build_install_dpdk = getattr(self, 'build_install_dpdk_%s_meson' % self.get_os_type())
build_install_dpdk(target, extra_options)
def build_install_dpdk_linux_meson(self, target, extra_options):
@@ -347,32 +304,6 @@ class DPDKdut(Dut):
for mod in kmod:
self.send_expect("cp %s %s/kmod/" % (mod, target), "# ")
- def build_install_dpdk_linux_makefile(self, target, extra_options):
- """
- Build DPDK source code on linux with specified target.
- """
- build_time = 600
- if "icc" in target:
- build_time = 900
- # clean all
- self.send_expect("rm -rf " + target, "#")
- self.send_expect("rm -rf %s" % r'./app/test/test_resource_c.res.o' , "#")
- self.send_expect("rm -rf %s" % r'./app/test/test_resource_tar.res.o' , "#")
- self.send_expect("rm -rf %s" % r'./app/test/test_pci_sysfs.res.o' , "#")
-
- self.set_build_options({'RTE_EAL_IGB_UIO': 'y'})
-
- # compile
- out = self.send_expect("make -j %d install T=%s %s MAKE_PAUSE=n" %
- (self.number_of_cores, target, extra_options), "# ", build_time)
- if("Error" in out or "No rule to make" in out):
- self.logger.error("ERROR - try without '-j'")
- # if Error try to execute make without -j option
- out = self.send_expect("make install T=%s %s MAKE_PAUSE=n" % (target, extra_options), "# ", build_time*4)
-
- assert ("Error" not in out), "Compilation error..."
- assert ("No rule to make" not in out), "No rule to make error..."
-
def build_install_dpdk_freebsd_meson(self, target, extra_options):
# meson build same as linux
self.build_install_dpdk_linux_meson(target, extra_options)
@@ -383,29 +314,6 @@ class DPDKdut(Dut):
if not isinstance(out, int) and len(out) > 0:
self.send_expect("cp %s %s/kmod/" % (out, target), "# ")
- def build_install_dpdk_freebsd_makefile(self, target, extra_options):
- """
- Build DPDK source code on Freebsd with specified target.
- """
- # clean all
- self.send_expect("rm -rf " + target, "#")
- self.send_expect("rm -rf %s" % r'./app/test/test_resource_c.res.o' , "#")
- self.send_expect("rm -rf %s" % r'./app/test/test_resource_tar.res.o' , "#")
- self.send_expect("rm -rf %s" % r'./app/test/test_pci_sysfs.res.o' , "#")
- build_time = 180
- # compile
- out = self.send_expect("make -j %d install T=%s MAKE_PAUSE=n" % (self.number_of_cores,
- target),
- "#", build_time)
- if("Error" in out or "No rule to make" in out):
- self.logger.error("ERROR - try without '-j'")
- # if Error try to execute make without -j option
- out = self.send_expect("make install T=%s MAKE_PAUSE=n" % target,
- "#", build_time)
-
- assert ("Error" not in out), "Compilation error..."
- assert ("No rule to make" not in out), "No rule to make error..."
-
def prepare_package(self):
if not self.skip_setup:
session_info = None
@@ -536,8 +444,7 @@ class DPDKdut(Dut):
"""
Build dpdk sample applications.
"""
- build_type = load_global_setting(HOST_BUILD_TYPE_SETTING)
- build_dpdk_apps = getattr(self, 'build_dpdk_apps_%s_%s' % (self.get_os_type(), build_type))
+ build_dpdk_apps = getattr(self, 'build_dpdk_apps_%s_meson' % self.get_os_type())
return build_dpdk_apps(folder, extra_options)
def build_dpdk_apps_linux_meson(self, folder, extra_options):
@@ -589,37 +496,10 @@ class DPDKdut(Dut):
return out
- def build_dpdk_apps_linux_makefile(self, folder, extra_options):
- """
- Build dpdk sample applications on linux.
- """
- # icc compile need more time
- if 'icc' in self.target:
- timeout = 300
- else:
- timeout = 90
- self.send_expect("rm -rf %s" % r'./app/test/test_resource_c.res.o' , "#")
- self.send_expect("rm -rf %s" % r'./app/test/test_resource_tar.res.o' , "#")
- self.send_expect("rm -rf %s" % r'./app/test/test_pci_sysfs.res.o' , "#")
- return self.send_expect("make -j %d -C %s %s" % (self.number_of_cores,
- folder, extra_options),
- "# ", timeout)
-
def build_dpdk_apps_freebsd_meson(self, folder, extra_options):
# meson build same as linux
return self.build_dpdk_apps_linux_meson(folder, extra_options)
- def build_dpdk_apps_freebsd_makefile(self, folder, extra_options):
- """
- Build dpdk sample applications on Freebsd.
- """
- self.send_expect("rm -rf %s" % r'./app/test/test_resource_c.res.o' , "#")
- self.send_expect("rm -rf %s" % r'./app/test/test_resource_tar.res.o' , "#")
- self.send_expect("rm -rf %s" % r'./app/test/test_pci_sysfs.res.o' , "#")
- return self.send_expect("make -j %d -C %s %s" % (self.number_of_cores,
- folder, extra_options),
- "# ", 180)
-
def get_blocklist_string(self, target, nic):
"""
Get block list command string.
@@ -668,12 +548,7 @@ class DPDKdut(Dut):
"""
# Enable Mellanox drivers
if drivername == "mlx5_core" or drivername == "mlx4_core":
- self.send_expect("sed -i -e 's/CONFIG_RTE_LIBRTE_MLX5_PMD=n/"
- + "CONFIG_RTE_LIBRTE_MLX5_PMD=y/' config/common_base", "# ", 30)
- self.send_expect("sed -i -e 's/CONFIG_RTE_LIBRTE_MLX4_PMD=n/"
- + "CONFIG_RTE_LIBRTE_MLX5_PMD=y/' config/common_base", "# ", 30)
- self.set_build_options({'RTE_LIBRTE_MLX5_PMD': 'y',
- 'RTE_LIBRTE_MLX5_PMD': 'y'})
+ self.set_build_options({'RTE_LIBRTE_MLX5_PMD': 'y'})
class DPDKtester(Tester):
@@ -250,7 +250,6 @@ PERF_SETTING = "DTS_PERF_ONLY"
FUNC_SETTING = "DTS_FUNC_ONLY"
HOST_DRIVER_SETTING = "DTS_HOST_DRIVER"
HOST_DRIVER_MODE_SETTING = "DTS_HOST_DRIVER_MODE"
-HOST_BUILD_TYPE_SETTING = "DTS_HOST_BUILD_TYPE"
HOST_NIC_SETTING = "DTS_HOST_NIC"
HOST_SHARED_LIB_SETTING = "DTS_HOST_SHARED_LIB"
HOST_SHARED_LIB_PATH = "DTS_HOST_SHARED_LIB_PATH"
@@ -40,7 +40,6 @@ from .config import AppNameConf, PortConf
from .dut import Dut
from .project_dpdk import DPDKdut
from .settings import (
- HOST_BUILD_TYPE_SETTING,
LOG_NAME_SEP,
NICS,
get_netdev,
@@ -233,11 +232,7 @@ class VirtDut(DPDKdut):
name_cfg = AppNameConf()
self.apps_name_conf = name_cfg.load_app_name_conf()
- # get apps name of current build type
- build_type = load_global_setting(HOST_BUILD_TYPE_SETTING)
- if build_type not in self.apps_name_conf:
- raise Exception('please config the apps name in app_name.cfg of build type:%s' % build_type)
- self.apps_name = self.apps_name_conf[build_type]
+ self.apps_name = self.apps_name_conf['meson']
# use the dut target directory instead of 'target' string in app name
for app in self.apps_name:
cur_app_path = self.apps_name[app].replace('target', self.target)