[V2,1/2] test_plans/vf_daemon: delete test_mac_antispoof
Commit Message
comfirm with Tu,Lijuan and Lin,Xueqin, delete the case
Signed-off-by: Yan Xia <yanx.xia@intel.com>
---
test_plans/vf_daemon_test_plan.rst | 39 ------------------------------
1 file changed, 39 deletions(-)
Comments
> -----Original Message-----
> From: dts <dts-bounces@dpdk.org> On Behalf Of Yan Xia
> Sent: Tuesday, October 26, 2021 9:28 PM
> To: dts@dpdk.org
> Cc: Xia, YanX <yanx.xia@intel.com>
> Subject: [dts] [PATCH V2 1/2] test_plans/vf_daemon: delete
> test_mac_antispoof
>
> comfirm with Tu,Lijuan and Lin,Xueqin, delete the case
>
> Signed-off-by: Yan Xia <yanx.xia@intel.com>
Acked-by: Xueqin Lin <Xueqin.lin@intel.com>
> ---
> test_plans/vf_daemon_test_plan.rst | 39 ------------------------------
> 1 file changed, 39 deletions(-)
>
> diff --git a/test_plans/vf_daemon_test_plan.rst
> b/test_plans/vf_daemon_test_plan.rst
> index 2c131f58..07543c9d 100644
> --- a/test_plans/vf_daemon_test_plan.rst
> +++ b/test_plans/vf_daemon_test_plan.rst
> @@ -182,45 +182,6 @@ Test Case 3: Set VLAN antispoof for VF from PF
> packet with matching vlan id
>
>
> -Test Case 4: Set mac antispoof for VF from PF -
> ===============================================
> -1. Add fake mac and use fake mac instead of transmitted mac in the
> - macswap mode, so default is non-matching SA::
> -
> - .addr_bytes = {0x00, 0x11, 0x22, 0x33, 0x44, 0x55}
> -
> - On VF0, add below two line code in file app/test-pmd/macswap_sse.h:
> - struct rte_ether_addr fake_mac = {.addr_bytes = {0x00, 0x11, 0x22, 0x33,
> 0x44, 0x55},};
> - rte_ether_addr_copy(&fake_mac, ð_hdr[0]->s_addr);
> -
> -2. Disable VF0 mac antispoof from PF::
> -
> - testpmd> set vf mac antispoof 0 0 off
> -
> -3. Start testpmd on VF0, set it in macswap forwarding mode and enable
> - verbose output::
> -
> - testpmd> set fwd macswap
> -
> -4. Send packet from tester to VF0 with correct SA, but code has changed
> - to use fake SA
> -
> -5. Stop VF0 testpmd and check VF0 can receive then transmit packet
> -
> -6. Enable VF0 mac antispoof from PF::
> -
> - testpmd> set vf mac antispoof 0 0 on
> -
> -7. Start VF0 testpmd
> -
> -8. Send packet from tester to VF0 with correct SA, but code has changed
> - to use fake SA
> -
> -9. Stop VF0 testpmd and check VF0 can receive packet but can't transmit
> packet
> -
> -10. Recover original code
> -
> -
> Test Case 5: Set the MAC address for VF from PF
> ===============================================
>
> --
> 2.33.1
@@ -182,45 +182,6 @@ Test Case 3: Set VLAN antispoof for VF from PF
packet with matching vlan id
-Test Case 4: Set mac antispoof for VF from PF
-===============================================
-1. Add fake mac and use fake mac instead of transmitted mac in the
- macswap mode, so default is non-matching SA::
-
- .addr_bytes = {0x00, 0x11, 0x22, 0x33, 0x44, 0x55}
-
- On VF0, add below two line code in file app/test-pmd/macswap_sse.h:
- struct rte_ether_addr fake_mac = {.addr_bytes = {0x00, 0x11, 0x22, 0x33, 0x44, 0x55},};
- rte_ether_addr_copy(&fake_mac, ð_hdr[0]->s_addr);
-
-2. Disable VF0 mac antispoof from PF::
-
- testpmd> set vf mac antispoof 0 0 off
-
-3. Start testpmd on VF0, set it in macswap forwarding mode and enable
- verbose output::
-
- testpmd> set fwd macswap
-
-4. Send packet from tester to VF0 with correct SA, but code has changed
- to use fake SA
-
-5. Stop VF0 testpmd and check VF0 can receive then transmit packet
-
-6. Enable VF0 mac antispoof from PF::
-
- testpmd> set vf mac antispoof 0 0 on
-
-7. Start VF0 testpmd
-
-8. Send packet from tester to VF0 with correct SA, but code has changed
- to use fake SA
-
-9. Stop VF0 testpmd and check VF0 can receive packet but can't transmit packet
-
-10. Recover original code
-
-
Test Case 5: Set the MAC address for VF from PF
===============================================