diff mbox series

[V1,1/2] tests/mtu_update: modify igb and igc critical values

Message ID 20210430154813.15699-2-linglix.chen@intel.com (mailing list archive)
State Accepted
Headers
Series modify igb and igc nic pktsize |

Commit Message

Lingli Chen April 30, 2021, 3:48 p.m. UTC 
According to dpdk-26436:If LPE is 1b,the maximum packet size that Foxville can receive is defined in the RLPML.RLPML register.The RLPML.RLPML register was set to MTU + 14 + 4 bytes (must consider at lease 1 VLAN tag since VLAN tag is not included in MTU).

Signed-off-by: Lingli Chen <linglix.chen@intel.com>
---
 tests/TestSuite_mtu_update.py | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)
diff mbox series

Patch

diff --git a/tests/TestSuite_mtu_update.py b/tests/TestSuite_mtu_update.py
index 5fa17c97..f1da8660 100644
--- a/tests/TestSuite_mtu_update.py
+++ b/tests/TestSuite_mtu_update.py
@@ -108,7 +108,7 @@  class TestMtuUpdate(TestCase):
         # The packet total size include ethernet header, ip header, and payload.
         # ethernet header length is 18 bytes, ip standard header length is 20 bytes.
         # pktlen = pktsize - ETHER_HEADER_LEN
-        if self.kdriver == "ixgbe":
+        if self.kdriver in ["igb", "igc", "ixgbe"]:
             max_pktlen = pktsize + ETHER_HEADER_LEN + VLAN
             padding = max_pktlen - IP_HEADER_LEN - ETHER_HEADER_LEN-VLAN
         else:
@@ -172,7 +172,7 @@  class TestMtuUpdate(TestCase):
         self.port_mask = utils.create_mask([self.rx_port, self.tx_port])
 
         self.pmdout = PmdOutput(self.dut)
-        self.set_mtu(ETHER_JUMBO_FRAME_MTU + 600)
+        self.set_mtu(ETHER_JUMBO_FRAME_MTU + 200)
 
     def set_up(self):
         """
@@ -240,10 +240,17 @@  class TestMtuUpdate(TestCase):
         self.exec("port start all")
         self.exec("set fwd mac")
         self.exec("start")
-
-        self.send_packet_of_size_to_tx_port(packet_size - 1, received=True)
-        self.send_packet_of_size_to_tx_port(packet_size, received=True)
-        self.send_packet_of_size_to_tx_port(packet_size + 1, received=False)
+        """
+        On 1G NICs, when the jubmo frame MTU set > 1500, the software adjust it to MTU+4.
+        """
+        if self.nic in ["powerville", "springville", "foxville"] and packet_size > 1500:
+            self.send_packet_of_size_to_tx_port(packet_size + 4 - 1, received=True)
+            self.send_packet_of_size_to_tx_port(packet_size + 4, received=True)
+            self.send_packet_of_size_to_tx_port(packet_size + 4 + 1, received=False)
+        else:
+            self.send_packet_of_size_to_tx_port(packet_size - 1, received=True)
+            self.send_packet_of_size_to_tx_port(packet_size, received=True)
+            self.send_packet_of_size_to_tx_port(packet_size + 1, received=False)
 
         self.exec("stop")
         self.pmdout.quit()