diff mbox series

[v1] test_plans/cvl_advanced_rss_gtpu: remove gtpogre from gtpu rss test plan

Message ID 20210323112829.69321-1-yuan.peng@intel.com (mailing list archive)
State Accepted
Headers
Series [v1] test_plans/cvl_advanced_rss_gtpu: remove gtpogre from gtpu rss test plan |

Commit Message

Peng, Yuan March 23, 2021, 11:28 a.m. UTC 
  GTPoGRE will have a single test plan for RSS function.
So remove the GTPoGRE from cvl_advanced_rss_gtpu_test_plan.rst

Signed-off-by: Peng Yuan <yuan.peng@intel.com>

Comments

Tu, Lijuan March 25, 2021, 6:13 a.m. UTC | #1 
> GTPoGRE will have a single test plan for RSS function.
> So remove the GTPoGRE from cvl_advanced_rss_gtpu_test_plan.rst
> 
> Signed-off-by: Peng Yuan <yuan.peng@intel.com>

Applied, thanks
diff mbox series

Patch

diff --git a/test_plans/cvl_advanced_rss_gtpu_test_plan.rst b/test_plans/cvl_advanced_rss_gtpu_test_plan.rst
index b6fe1096..d63df8f4 100644
--- a/test_plans/cvl_advanced_rss_gtpu_test_plan.rst
+++ b/test_plans/cvl_advanced_rss_gtpu_test_plan.rst
@@ -239,19 +239,6 @@  run the same test steps as below:
 
 Pattern: outer ipv4 + inner ipv4
 --------------------------------
-GTPoGRE is imported in DPDK-21.02.
-The Ptype is parsed same as GTP packet, so they match gtp RSS rule.
-We just need to add the GTPoGRE packet to the packets check.
-we need to add GTPoGRE packet to "basic hit pattern packets",
-"hit pattern/defined input set" and "hit pattern/not defined input set".
-the GTPoGRE packet format in this pattern is to add::
-
-    IP(proto=0x2F)/GRE(proto=0x0800)/
-
-after Ether layer, before IP layer, just like::
-
-    sendp([Ether(dst="68:05:CA:BB:26:E0")/IP(proto=0x2F)/GRE(proto=0x0800)/IP()/UDP(dport=2152)/GTP_U_Header(gtp_type=255, teid=0x123456)/GTPPDUSessionContainer(type=0, P=1, QFI=0x34)/IP(dst="192.168.0.1", src="192.168.0.2")/("X"*480)],iface="enp216s0f0")
-
 
 Test case: MAC_IPV4_GTPU_EH_IPV4 with UL/DL
 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
@@ -1507,14 +1494,6 @@  reconfig all the cases of "Pattern: outer ipv4 + inner ipv4"
         change the packet's inner L3 layer from IP to IPv6;
         change the ipv4 address to ipv6 address.
 
-the GTPoGRE packet format in this pattern is to add::
-
-    IP(proto=0x2F)/GRE(proto=0x0800)/
-
-after Ether layer, before IP layer, just like::
-
-    sendp([Ether(dst="68:05:CA:BB:26:E0")/IP(proto=0x2F)/GRE(proto=0x0800)/IP()/UDP(dport=2152)/GTP_U_Header(gtp_type=255, teid=0x123456)/GTPPDUSessionContainer(type=0, P=1, QFI=0x34)/IPv6(src="ABAB:910B:6666:3457:8295:3333:1800:2929",dst="CDCD:910A:2222:5498:8475:1111:3900:2020")/("X"*480)],iface="enp216s0f0")
-
 Pattern: outer ipv6 + inner ipv4
 --------------------------------
 
@@ -1525,14 +1504,6 @@  reconfig all the cases of "Pattern: outer ipv4 + inner ipv4"
     packets:
         change the packet's outer L3 layer from IP to IPv6;
 
-the GTPoGRE packet format in this pattern is to add::
-
-    IPv6(nh=0x2F)/GRE(proto=0x86dd)/
-
-after Ether layer, before IP layer, just like::
-
-    sendp([Ether(dst="68:05:CA:BB:26:E0")/IPv6(nh=0x2F)/GRE(proto=0x86dd)/IPv6()/UDP(dport=2152)/GTP_U_Header(gtp_type=255, teid=0x123456)/GTPPDUSessionContainer(type=0, P=1, QFI=0x34)/IP(dst="192.168.0.1", src="192.168.0.2")/("X"*480)],iface="enp216s0f0")
-
 Pattern: outer ipv6 + inner ipv6
 --------------------------------
 
@@ -1546,14 +1517,6 @@  reconfig all the cases of "Pattern: outer ipv4 + inner ipv4"
         change the packet's inner L3 layer from IP to IPv6;
         change the ipv4 address to ipv6 address.
 
-the GTPoGRE packet format in this pattern is to add::
-
-    IPv6(nh=0x2F)/GRE(proto=0x86dd)/
-
-after Ether layer, before IP layer, just like::
-
-    sendp([Ether(dst="68:05:CA:BB:26:E0")/IPv6(nh=0x2F)/GRE(proto=0x86dd)/IPv6()/UDP(dport=2152)/GTP_U_Header(gtp_type=255, teid=0x123456)/GTPPDUSessionContainer(type=0, P=1, QFI=0x34)/IPv6(src="ABAB:910B:6666:3457:8295:3333:1800:2929",dst="CDCD:910A:2222:5498:8475:1111:3900:2020")/("X"*480)],iface="enp216s0f0")
-
 negative case
 =============
 Subcase: invalid input set 
@@ -1779,13 +1742,6 @@  default pattern supported case
 
 inner L4 protocal hash case
 ===========================
-Note: add two GTPoGRE packets in each subcase with::
-
-    IPv6(nh=0x2F)/GRE(proto=0x86dd)/
-
-or::
-
-    IP(proto=0x2F)/GRE(proto=0x0800)/
 
 Subcase: MAC_IPV4_GTPU_IPV4_UDP/TCP
 -----------------------------------
@@ -2638,8 +2594,6 @@  all the test cases run the same test steps as below:
 8. send the same packets in step3, only switch ip address.
    check the received packets which switched ip address have different hash value.
 
-Note: the GTPoGRE packets need to be added to symmetric cases as a Ptype, just like toeplitz cases.
-
 Pattern: symmetric outer ipv4 + inner ipv4
 ------------------------------------------