diff mbox series

[V1,1/3] test_plans/cvl_limit_value_test

Message ID 20201104102528.6880-2-qinx.sun@intel.com (mailing list archive)
State Accepted
Headers show
Series add test suite cvl_limit_value_test | expand

Commit Message

Sun, QinX Nov. 4, 2020, 10:25 a.m. UTC
These 8 cases take a long time to run, so split them from 3 already existed

suites(iavf_fdir, cvl_fdir, cvl_dcf_switch_filter) and make them as a new test plan.

Signed-off-by: sunqin <qinx.sun@intel.com>
---
 test_plans/cvl_limit_value_test_test_plan.rst | 594 ++++++++++++++++++
 1 file changed, 594 insertions(+)
 create mode 100644 test_plans/cvl_limit_value_test_test_plan.rst
diff mbox series

Patch

diff --git a/test_plans/cvl_limit_value_test_test_plan.rst b/test_plans/cvl_limit_value_test_test_plan.rst
new file mode 100644
index 0000000..4c141a1
--- /dev/null
+++ b/test_plans/cvl_limit_value_test_test_plan.rst
@@ -0,0 +1,594 @@ 
+.. Copyright (c) <2020>, Intel Corporation
+   All rights reserved.
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in
+     the documentation and/or other materials provided with the
+     distribution.
+
+   - Neither the name of Intel Corporation nor the names of its
+     contributors may be used to endorse or promote products derived
+     from this software without specific prior written permission.
+
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+   FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+   COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+   INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+   OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+
+Supported function type
+-----------------------
+
+    validate
+    create
+    destroy
+    flush
+    list
+
+Supported action type
+---------------------
+
+    queue index
+    drop
+    rss queues
+    passthru
+    mark
+    mark/rss
+
+
+Prerequisites
+=============
+
+1. Hardware:
+   columbiaville_25g/columbiaville_100g
+
+2. Software:
+   DPDK: http://dpdk.org/git/dpdk
+   scapy: http://www.secdev.org/projects/scapy/
+
+3. Copy specific ice package to /lib/firmware/intel/ice/ddp/ice.pkg
+   Then reboot server, and compile DPDK
+
+4. Generate 2 VFs on each PF and set mac address for each VF::
+
+    echo 2 > /sys/bus/pci/devices/0000:86:00.0/sriov_numvfs
+    echo 2 > /sys/bus/pci/devices/0000:86:00.1/sriov_numvfs
+    ip link set enp134s0f0 vf 0 mac 00:11:22:33:44:55
+    ip link set enp134s0f0 vf 1 mac 00:11:22:33:44:66
+    ip link set enp134s0f1 vf 0 mac 00:11:22:33:44:77
+    ip link set enp134s0f1 vf 1 mac 00:11:22:33:44:88
+
+   0000:86:00.0 generate 0000:86:01.0 and 0000:86:01.1
+   0000:86:00.1 generate 0000:86:11.0 and 0000:86:11.1
+   define 86:01.0 as vf00, 86:01.1 as vf01, 86:11.0 as vf10, 86:11.1 as vf11.
+   assign mac address of pf0 is 68:05:ca:a3:1a:60,
+   assign mac address of pf1 is 68:05:ca:a3:1a:61.
+
+5. Bind VFs to dpdk driver::
+
+    ./usertools/dpdk-devbind.py -b vfio-pci 86:01.0 86:01.1 86:11.0 86:11.1
+
+5. Launch the app ``testpmd`` with the following arguments::
+
+    ./testpmd -c 0xff -n 6 -w 86:01.0 -w 86:01.1 --file-prefix=vf -- -i --rxq=16 --txq=16
+    testpmd> set fwd rxonly
+    testpmd> set verbose 1
+
+6. on tester side, copy the layer python file to /root::
+
+    cp pfcp.py to /root
+
+   then import layers when start scapy::
+
+    >>> import sys
+    >>> sys.path.append('/root')
+    >>> from pfcp import PFCP
+    >>> from scapy.contrib.gtp import *
+    >>> from scapy.contrib.mpls import *
+
+Test case: Max number
+=====================
+All the max number cases are designed based on 2*100G NIC.
+If the hardware is 4*25G NIC, the guaranteed rule number of PF is 512.
+So in subcase 3 and subcase 4, there can be created at most 14848 rules on 1pf and 2vfs.
+
+Subcase 1: 14336 rules on 1 vf
+------------------------------
+
+1. create 14336 rules on vf00::
+
+    flow create 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.0 / end actions queue index 1 / mark / end
+    flow create 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.1 / end actions queue index 1 / mark / end
+    ......
+    flow create 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.55.255 / end actions queue index 1 / mark / end
+
+   all the rules are created successfully.
+
+2. create one more rule::
+
+    flow create 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.56.0 / end actions queue index 1 / mark / end
+
+   the rule failed to create. return the error message.
+
+3. check the rule list, there are 14336 rules listed.
+
+4. send matched packets for rule 0 and rule 14335::
+
+    sendp([Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.20",dst="192.168.0.0")/Raw('x' * 80)],iface="enp134s0f1")
+    sendp([Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.20",dst="192.168.55.255")/Raw('x' * 80)],iface="enp134s0f1")
+
+   check all packets are redirected to expected queue with FDIR matched ID=0x0
+
+5. create a rule on vf01, it failed,
+   check the error message, the rule number has expired the max rule number.
+
+6. create a rule on vf10, it failed,
+   check the error message, the rule number has expired the max rule number.
+
+7. flush all the rules, check the rule list,
+   there is no rule listed.
+
+8. verify matched packets for rule 0  and rule 14335 received without FDIR matched ID.
+
+Subcase 2: 14336 rules on 2 vfs of 2pfs
+---------------------------------------
+
+1. start testpmd on vf00::
+
+    ./testpmd -c 0xf -n 6 -w 86:01.0 --file-prefix=vf00 -- -i --rxq=4 --txq=4
+
+   create 1 rule on vf00::
+
+    flow create 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.0 / end actions queue index 1 / mark / end
+
+   created successfully, check the rule is listed.
+
+2. start testpmd on vf10::
+
+    ./testpmd -c 0xf0 -n 6 -w 86:0a.0 --file-prefix=vf10 -- -i --rxq=4 --txq=4
+
+   create 14336 rules on vf10::
+
+    flow create 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.0 / end actions queue index 1 / mark / end
+    flow create 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.1 / end actions queue index 1 / mark / end
+    ......
+    flow create 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.55.255 / end actions queue index 1 / mark / end
+
+   all the rules except the last one are created successfully.
+   check the rule list, there listed 14335 rules.
+
+3. send matched packet to vf00 and matched packet for rule 14334 to vf10,
+   check all packets are redirected to expected queue with FDIR matched ID=0x0
+
+4. flush all the rules, check the rule list,
+   there is no rule listed.
+
+5. verify matched packet received without FDIR matched ID.
+
+Subcase 3: 1025 rules on 1pf and 14335 rules on 2vfs
+----------------------------------------------------
+each pf can create 1024 rules at least in 2 ports card.
+each pf can create 512 rules at least in 4 ports card.
+there are 14k rules shared by pfs and vfs.
+so 1 pf and 2 vfs can create 15360 rules at most on 2 ports card.
+1 pf and 2 vfs can create 14848 rules at most on 4 ports card.
+
+1. create 1025 rules on pf0::
+
+    ethtool -N enp134s0f0 flow-type tcp4 src-ip 192.168.0.0 dst-ip 192.168.100.2 src-port 32 dst-port 33 action 8
+    ethtool -N enp134s0f0 flow-type tcp4 src-ip 192.168.0.1 dst-ip 192.168.100.2 src-port 32 dst-port 33 action 8
+    ......
+    ethtool -N enp134s0f0 flow-type tcp4 src-ip 192.168.3.255 dst-ip 192.168.100.2 src-port 32 dst-port 33 action 8
+    ethtool -N enp134s0f0 flow-type tcp4 src-ip 192.168.4.0 dst-ip 192.168.100.2 src-port 32 dst-port 33 action 8
+
+   all the rules can be created successfully::
+
+    Added rule with ID <Rule ID>
+
+   List the rules on pf0::
+
+    ethtool -n enp134s0f0
+
+2. start testpmd on vf00::
+
+    ./testpmd -c 0xf -n 6 -w 86:01.0 --file-prefix=vf00 -- -i --rxq=4 --txq=4
+
+   create 1 rule on vf00::
+
+    flow create 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.0 / end actions queue index 1 / mark / end
+
+   created successfully, check the rule is listed.
+
+2. start testpmd on vf10::
+
+    ./testpmd -c 0xf0 -n 6 -w 86:0a.0 --file-prefix=vf10 -- -i --rxq=4 --txq=4
+
+   create 14335 rules on vf10::
+
+    flow create 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.0 / end actions queue index 1 / mark / end
+    flow create 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.1 / end actions queue index 1 / mark / end
+    ......
+    flow create 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.55.254 / end actions queue index 1 / mark / end
+
+   all the rules except the last one are created successfully.
+   check the rule list, there listed 14334 rules.
+
+3. send matched packet to vf00 and matched packet for rule 14333 to vf10,
+   check all packets are redirected to expected queue with FDIR matched ID=0x0
+
+4. delete 1 rule on pf0::
+
+    ethtool -N enp134s0f0 delete <Rule ID>
+
+5. create one more rule on vf10::
+
+    flow create 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.55.254 / end actions queue index 1 / mark / end
+
+   the rule can be created successfully.
+
+6. send matched packet to vf10, it can be redirected to queue 1 with FDIR matched ID=0x0.
+
+7. flush all the rules, check the rule list,
+   there is no rule listed.
+
+8. verify matched packet received without FDIR matched ID.
+
+Subcase 3: 15360 rules on 1pf and 0 rules on 2vfs
+-------------------------------------------------
+each pf can create 1024 rules at least in 2 ports card.
+each pf can create 512 rules at least in 4 ports card.
+there are 14k rules shared by pfs and vfs.
+so 1 pf and 2 vfs can create 15360 rules at most on 2 ports card.
+1 pf and 2 vfs can create 14848 rules at most on 4 ports card.
+so if create 15360/14848 rules on 1 pf, there can't create rule on vf successfully.
+
+1. create 15360 rules on pf0::
+
+    ethtool -N enp134s0f0 flow-type tcp4 src-ip 192.168.0.0 dst-ip 192.168.100.2 src-port 32 dst-port 33 action 8
+    ethtool -N enp134s0f0 flow-type tcp4 src-ip 192.168.0.1 dst-ip 192.168.100.2 src-port 32 dst-port 33 action 8
+    ......
+    ethtool -N enp134s0f0 flow-type tcp4 src-ip 192.168.57.255 dst-ip 192.168.100.2 src-port 32 dst-port 33 action 8
+
+   all the rules can be created successfully::
+
+    Added rule with ID <Rule ID>
+
+2. failed to create one more rule on pf0::
+
+    ethtool -N enp134s0f0 flow-type tcp4 src-ip 192.168.58.0 dst-ip 192.168.100.2 src-port 32 dst-port 33 action 8
+
+3. start testpmd on vf00 and vf10::
+
+    ./testpmd -c 0xf -n 6 -w 86:01.0 -w 86:11.0 --file-prefix=vf00 -- -i --rxq=4 --txq=4
+
+   create 1 rule on vf00::
+
+    flow create 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.0 / end actions queue index 1 / mark / end
+
+   failed to create the rule, check there is no rule listed.
+
+   create 1 rule on vf10::
+
+    flow create 1 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.0 / end actions queue index 1 / mark / end
+
+   failed to create the rule, check there is no rule listed.
+
+4. delete 1 rule on pf0::
+
+    ethtool -N enp134s0f0 delete <Rule ID>
+
+5. create 1 rule on vf00::
+
+    flow create 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.55.254 / end actions queue index 1 / mark / end
+
+   the rule can be created successfully.
+
+   create 1 rule on vf10::
+
+    flow create 1 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.0 / end actions queue index 1 / mark / end
+
+   failed to create the rule, check there is no rule listed.
+
+6. send matched packet to vf00, it can be redirected to queue 1 with FDIR matched ID=0x0.
+   send matched packet to vf10, it is received without FDIR matched ID.
+
+7. delete 1 more rule on pf0::
+
+    ethtool -N enp134s0f0 delete <Rule ID>
+
+8. create 1 rule on vf10::
+
+    flow create 1 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.0 / end actions queue index 1 / mark / end
+
+   the rule can be created successfully.
+
+9. send matched packet to vf00, it can be redirected to queue 1 with FDIR matched ID=0x0.
+   send matched packet to vf10, it can be redirected to queue 1 with FDIR matched ID=0x0.
+
+
+Test case: Stress test
+======================
+
+Subcase 1: add/delete rules
+---------------------------
+
+1. create two rules::
+
+    flow create 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 / udp src is 22 dst is 23 / end actions queue index 1 / mark id 0 / end
+    flow create 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 / tcp src is 22 dst is 23 / end actions rss queues 2 3 end / mark id 1 / end
+
+   return the message::
+
+    Flow rule #0 created
+    Flow rule #1 created
+
+   list the rules::
+
+    testpmd> flow list 0
+    ID      Group   Prio    Attr    Rule
+    0       0       0       i--     ETH IPV4 UDP => QUEUE MARK
+    1       0       0       i--     ETH IPV4 TCP => RSS MARK
+
+2. delete the rules::
+
+    testpmd> flow flush 0
+
+3. repeat the create and delete operations in step1-2 14336 times.
+
+4. create the two rules one more time, check the rules listed.
+
+5. send matched packet::
+
+    sendp([Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.20",dst="192.168.0.21")/UDP(sport=22,dport=23)/Raw('x' * 80)],iface="enp134s0f1")
+    sendp([Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.20",dst="192.168.0.21")/TCP(sport=22,dport=23)/Raw('x' * 80)],iface="enp134s0f1")
+
+   check packet 1 is redirected to queue 1 with FDIR matched ID=0x0
+   check packet 2 is redirected to queue 2 or queue 3 with FDIR matched ID=0x1
+
+Subcase 2: add/delete rules on two VFs
+--------------------------------------
+
+1. create a rule on each vf::
+
+    flow create 0 ingress pattern eth / ipv4 src is 192.168.0.0 dst is 192.1.0.0 tos is 4 / tcp src is 22 dst is 23 / end actions queue index 5 / end
+    flow create 1 ingress pattern eth / ipv4 src is 192.168.0.0 dst is 192.1.0.0 tos is 4 / tcp src is 22 dst is 23 / end actions queue index 5 / end
+
+   return the message::
+
+    Flow rule #0 created
+    Flow rule #0 created
+
+   list the rules::
+
+    testpmd> flow list 0
+    ID      Group   Prio    Attr    Rule
+    0       0       0       i--     ETH IPV4 TCP => QUEUE
+    testpmd> flow list 1
+    ID      Group   Prio    Attr    Rule
+    0       0       0       i--     ETH IPV4 TCP => QUEUE
+
+2. delete the rules::
+
+    flow destroy 0 rule 0
+    flow destroy 1 rule 0
+
+3. repeate the create and delete operations in step1-2 14336 times with different IP src address.
+
+4. create the rule on each vf one more time, check the rules listed::
+
+    flow create 0 ingress pattern eth / ipv4 src is 192.168.56.0 dst is 192.1.0.0 tos is 4 / tcp src is 22 dst is 23 / end actions queue index 5 / end
+    flow create 1 ingress pattern eth / ipv4 src is 192.168.56.0 dst is 192.1.0.0 tos is 4 / tcp src is 22 dst is 23 / end actions queue index 5 / end
+
+5. send matched packet::
+
+    sendp([Ether(dst="00:11:22:33:44:55")/IP(src="192.168.56.0",dst="192.1.0.0",tos=4)/TCP(sport=22,dport=23)/Raw('x' * 80)],iface="enp134s0f1")
+    sendp([Ether(dst="00:11:22:33:44:66")/IP(src="192.168.56.0",dst="192.1.0.0",tos=4)/TCP(sport=22,dport=23)/Raw('x' * 80)],iface="enp134s0f1")
+
+   check the packet is redirected to queue 5 of two vfs.
+
+Prerequisites
+=============
+
+1. Hardware:
+   columbiaville_25g/columbiaville_100g
+   design the cases with 2 ports card.
+
+2. Software:
+   DPDK: http://dpdk.org/git/dpdk
+   scapy: http://www.secdev.org/projects/scapy/
+
+3. Copy specific ice package to /lib/firmware/intel/ice/ddp/ice.pkg
+   Then reboot server, and compile DPDK
+
+4. Bind the pf to dpdk driver::
+
+    ./usertools/dpdk-devbind.py -b igb_uio 86:00.0 86:00.1
+
+5. Launch the app ``testpmd`` with the following arguments::
+
+    ./testpmd -c 0xff -n 6 -w 86:00.0 --log-level="ice,7" -- -i --portmask=0xff --rxq=64 --txq=64 --port-topology=loop
+    testpmd> set fwd rxonly
+    testpmd> set verbose 1
+
+   If set UDP tunnel flow rule::
+
+    testpmd> port config 0 udp_tunnel_port add vxlan 4789
+    testpmd> start
+
+   Notes: if need two ports environment, launch ``testpmd`` with the following arguments::
+
+    ./testpmd -c 0xff -n 6 -w 86:00.0 -w 86:00.1 --log-level="ice,7" -- -i --portmask=0xff --rxq=64 --txq=64 --port-topology=loop
+
+Test case: add/delete rules
+---------------------------
+
+1. create two rules::
+
+    flow create 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 / udp src is 22 dst is 23 / end actions queue index 1 / mark / end
+    flow create 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 / tcp src is 22 dst is 23 / end actions rss queues 2 3 end / mark id 1 / end
+
+   return the message::
+
+    Flow rule #0 created
+    Flow rule #1 created
+
+   list the rules::
+
+    testpmd> flow list 0
+    ID      Group   Prio    Attr    Rule
+    0       0       0       i--     ETH IPV4 UDP => QUEUE MARK
+    1       0       0       i--     ETH IPV4 TCP => RSS MARK
+
+2. delete the rules::
+
+    testpmd> flow flush 0
+
+3. repeate the create and delete operations in step1-2 15360 times.
+
+4. create the two rules one more time, check the rules listed.
+
+5. send matched packet::
+
+    sendp([Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.20",dst="192.168.0.21")/UDP(sport=22,dport=23)/Raw('x' * 80)],iface="enp175s0f0")
+    sendp([Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.20",dst="192.168.0.21")/TCP(sport=22,dport=23)/Raw('x' * 80)],iface="enp175s0f0")
+
+   check packet 1 is redirected to queue 1 with FDIR matched ID=0x0
+   check packet 2 is redirected to queue 2 or queue 3 with FDIR matched ID=0x1
+
+Prerequisites
+=============
+
+1. Hardware:
+   columbiaville_25g/columbiaville_100g
+   design the cases with 2 ports card.
+
+2. Software:
+   dpdk: http://dpdk.org/git/dpdk
+   scapy: http://www.secdev.org/projects/scapy/
+
+3. Copy specific ice package to /lib/firmware/updates/intel/ice/ddp/ice.pkg,
+   then load driver::
+
+     rmmod ice
+     insmod ice.ko
+
+4. Get the pci device id of DUT, for example::
+
+     ./usertools/dpdk-devbind.py -s
+
+     0000:18:00.0 'Device 1593' if=enp24s0f0 drv=ice unused=vfio-pci
+     0000:18:00.1 'Device 1593' if=enp24s0f1 drv=ice unused=vfio-pci
+
+5. Generate 4 VFs on PF0::
+
+     echo 4 > /sys/bus/pci/devices/0000:18:00.0/sriov_numvfs
+
+     ./usertools/dpdk-devbind.py -s
+     0000:18:01.0 'Ethernet Adaptive Virtual Function 1889' if=enp24s1 drv=iavf unused=vfio-pci
+     0000:18:01.1 'Ethernet Adaptive Virtual Function 1889' if=enp24s1f1 drv=iavf unused=vfio-pci
+     0000:18:01.2 'Ethernet Adaptive Virtual Function 1889' if=enp24s1f2 drv=iavf unused=vfio-pci
+     0000:18:01.3 'Ethernet Adaptive Virtual Function 1889' if=enp24s1f3 drv=iavf unused=vfio-pci
+
+6. Set VF0 as trust::
+
+     ip link set enp24s0f0 vf 0 trust on
+
+7. Bind VFs to dpdk driver::
+
+     modprobe vfio-pci
+     ./usertools/dpdk-devbind.py -b vfio-pci 0000:18:01.0 0000:18:01.1 0000:18:01.2 0000:18:01.3
+
+8. Launch dpdk on VF0 and VF1, and VF0 request DCF mode::
+
+     ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xf -n 4 -w 0000:18:01.0,cap=dcf -w 0000:18:01.1 -- -i
+     testpmd> set portlist 1
+     testpmd> set fwd rxonly
+     testpmd> set verbose 1
+     testpmd> start
+     testpmd> show port info all
+
+   check the VF0 driver is net_ice_dcf.
+
+9. on tester side, copy the layer python file to /root::
+
+      cp pfcp.py to /root
+
+    then import layers when start scapy::
+
+      >>> import sys
+      >>> sys.path.append('/root')
+      >>> from pfcp import PFCP
+      >>> from scapy.contrib.igmp import *
+
+Test case: max rule number
+==========================
+
+Description: 32k switch filter rules can be created on a CVL card,
+and all PFs and VFs share the 32k rules. But the system will first create
+some MAC_VLAN rules in switch table, and as the number of rules increased,
+the hash conflicts in the switch filter table are increased, so we can
+create a total of 32563 switch filter rules on a DCF.
+
+1. create 32563 rules with the same pattern, but different input set::
+
+     testpmd> flow create 0 ingress pattern eth / ipv4 src is 192.168.0.0 / end actions vf id 1 / end
+     testpmd> flow create 0 ingress pattern eth / ipv4 src is 192.168.0.1 / end actions vf id 1 / end
+     ......
+     testpmd> flow create 0 ingress pattern eth / ipv4 src is 192.168.127.177 / end actions vf id 1 / end
+     testpmd> flow list 0
+
+   check the rules exist in the list.
+
+2. create one more rule::
+
+     testpmd> flow create 0 ingress pattern eth / ipv4 src is 192.168.127.178 / end actions vf id 1 / end
+
+   check the rule can not be created successfully, and
+   testpmd provide a friendly output, showing::
+
+     ice_flow_create(): Failed to create flow
+     port_flow_complain(): Caught PMD error type 2 (flow rule (handle)): switch filter create flow fail: Invalid argument
+
+3. check the rule list
+
+     testpmd> flow list 0
+
+   check the rule in step 2 not exists in the list.
+
+4. send 32563 matched packets for rule 0-32562::
+
+     sendp([Ether(dst="68:05:ca:8d:ed:a8")/IP(src="192.168.0.0")/TCP(sport=25,dport=23)/("X"*480)], iface="ens786f0", count=1)
+     sendp([Ether(dst="68:05:ca:8d:ed:a8")/IP(src="192.168.0.1")/TCP(sport=25,dport=23)/("X"*480)], iface="ens786f0", count=1)
+     ......
+     sendp([Ether(dst="68:05:ca:8d:ed:a8")/IP(src="192.168.127.177")/TCP(sport=25,dport=23)/("X"*480)], iface="ens786f0", count=1)
+
+   check port 1 receive the 32563 packets.
+   send 1 mismatched packet::
+
+     sendp([Ether(dst="68:05:ca:8d:ed:a8")/IP(src="192.167.0.1")/TCP(sport=25,dport=23)/("X"*480)], iface="ens786f0", count=1)
+
+   check the packet are not to port 1.
+
+5. verify rules can be destroyed::
+
+     testpmd> flow flush 0
+     testpmd> flow list 0
+
+   check the rules not exist in the list.
+   send 32563 matched packets, check the packets are not to port 1.
\ No newline at end of file