@@ -73,7 +73,7 @@ Prerequisites
6. Enable vlan prune flag::
- ethtool --set-priv-flags ens785f0 vf-vlan-prune-disable on
+ ethtool --set-priv-flags ens785f0 vf-vlan-pruning off
7. Generate 4 VFs on PF0(not all the VFs are used)::
@@ -130,7 +130,7 @@ Prerequisites
13. For AVF QinQ test cases(10-14), recreate Generate 1 VFs on PF0, reconfig the VF then launch testpmd::
echo 0 > /sys/bus/pci/devices/0000:18:00.0/sriov_numvfs
- ethtool --set-priv-flags ens785f0 vf-vlan-prune-disable off
+ ethtool --set-priv-flags ens785f0 vf-vlan-pruning on
echo 1 > /sys/bus/pci/devices/0000:18:00.0/sriov_numvfs
ip link set ens785f0 vf 0 mac 00:11:22:33:44:11
ip link set dev ens785f0 vf 0 spoofchk off
@@ -908,7 +908,7 @@ Test case 09: vlan filter when pvid enable
1. reset test environment, create vfs and disable vlan prune flag::
- ethtool --set-priv-flags ens785f0 vf-vlan-prune-disable off
+ ethtool --set-priv-flags ens785f0 vf-vlan-pruning on
2. repeat Prerequisites steps from 7 to 12
@@ -1116,7 +1116,7 @@ Test case 12: Enable/Disable IAVF VLAN header insertion
1. enable vf-vlan-prune-disable flag::
echo 0 > /sys/bus/pci/devices/0000:18:00.0/sriov_numvfs
- ethtool --set-priv-flags ens785f0 vf-vlan-prune-disable on
+ ethtool --set-priv-flags ens785f0 vf-vlan-pruning off
2. set up test environment again::
old mode 100644
new mode 100755
@@ -253,7 +253,7 @@ class TestCvlQinq(TestCase):
Run before each test case.
'''
self.pci_list = []
- self.dut.send_expect('ethtool --set-priv-flags %s vf-vlan-prune-disable on' % self.pf_interface, "#")
+ self.dut.send_expect('ethtool --set-priv-flags %s vf-vlan-pruning off' % self.pf_interface, "# ")
def setup_pf_vfs_env(self, vfs_num=4):
@@ -644,7 +644,7 @@ class TestCvlQinq(TestCase):
'Ether(dst="%s",type=0x8100)/Dot1Q(vlan=11,type=0x0800)/IP(src="196.222.232.221")/("X"*480)' % self.vf1_mac]
pkt_list2 = ['Ether(dst="%s",type=0x8100)/Dot1Q(vlan=21,type=0x8100)/Dot1Q(vlan=2,type=0x0800)/IP(src="196.222.232.221")/("X"*480)' % self.vf1_mac,
'Ether(dst="%s",type=0x8100)/Dot1Q(vlan=21,type=0x0800)/IP(src="196.222.232.221")/("X"*480)' % self.vf1_mac]
- self.dut.send_expect('ethtool --set-priv-flags %s vf-vlan-prune-disable off' % self.pf_interface, '#')
+ self.dut.send_expect('ethtool --set-priv-flags %s vf-vlan-pruning on' % self.pf_interface, '# ')
self.setup_pf_vfs_env()
self.launch_testpmd(dcf_param=True)
self.pmd_output.execute_cmd("vlan set filter on 1")
@@ -677,7 +677,7 @@ class TestCvlQinq(TestCase):
'Ether(dst="%s",type=0x8100)/Dot1Q(vlan=1,type=0x0800)/IP(src="196.222.232.221")/("X"*480)' % self.vf1_mac]
pkt_list2 = ['Ether(dst="%s",type=0x8100)/Dot1Q(vlan=11,type=0x8100)/Dot1Q(vlan=2,type=0x0800)/IP(src="196.222.232.221")/("X"*480)' % self.vf1_mac,
'Ether(dst="%s",type=0x8100)/Dot1Q(vlan=11,type=0x0800)/IP(src="196.222.232.221")/("X"*480)' % self.vf1_mac]
- self.dut.send_expect('ethtool --set-priv-flags %s vf-vlan-prune-disable off' % self.pf_interface, '#')
+ self.dut.send_expect('ethtool --set-priv-flags %s vf-vlan-pruning on' % self.pf_interface, '# ')
self.setup_pf_vfs_env(vfs_num=1)
self.launch_testpmd(vfs_num=1)
self.pmd_output.execute_cmd("vlan set filter on 0")
@@ -710,7 +710,7 @@ class TestCvlQinq(TestCase):
"""
pkt_list = ['Ether(dst="%s",type=0x8100)/Dot1Q(vlan=1,type=0x8100)/Dot1Q(vlan=2,type=0x0800)/IP(src="196.222.232.221")/("X"*480)' % self.vf1_mac,
'Ether(dst="%s",type=0x8100)/Dot1Q(vlan=1,type=0x0800)/IP(src="196.222.232.221")/("X"*480)' % self.vf1_mac]
- self.dut.send_expect('ethtool --set-priv-flags %s vf-vlan-prune-disable off' % self.pf_interface, '#')
+ self.dut.send_expect('ethtool --set-priv-flags %s vf-vlan-pruning on' % self.pf_interface, '# ')
self.setup_pf_vfs_env(vfs_num=1)
self.launch_testpmd(vfs_num=1)
self.pmd_output.execute_cmd("vlan set filter on 0")
@@ -744,7 +744,7 @@ class TestCvlQinq(TestCase):
out_vlan = 1
pkt_list = ['Ether(dst="%s",type=0x0800)/IP(src="196.222.232.221")/("X"*480)' % self.vf1_mac,
'Ether(dst="%s",type=0x8100)/Dot1Q(vlan=11,type=0x0800)/IP(src="196.222.232.221")/("X"*480)' % self.vf1_mac]
- self.dut.send_expect('ethtool --set-priv-flags %s vf-vlan-prune-disable on' % self.pf_interface, '#')
+ self.dut.send_expect('ethtool --set-priv-flags %s vf-vlan-pruning off' % self.pf_interface, '# ')
self.setup_pf_vfs_env(vfs_num=1)
self.launch_testpmd(vfs_num=1)
self.pmd_output.execute_cmd("stop")
@@ -787,7 +787,7 @@ class TestCvlQinq(TestCase):
"""
param = '--rxq=16 --txq=16 --disable-crc-strip'
pkt = 'Ether(dst="%s",type=0x0800)/IP(src="196.222.232.221")/("X"*480)' % self.vf1_mac
- self.dut.send_expect('ethtool --set-priv-flags %s vf-vlan-prune-disable off' % self.pf_interface, '#')
+ self.dut.send_expect('ethtool --set-priv-flags %s vf-vlan-pruning on' % self.pf_interface, '# ')
self.setup_pf_vfs_env(vfs_num=1)
self.pmd_output.start_testpmd(cores='1S/4C/1T', param=param, ports=self.pci_list, socket=self.ports_socket)
self.pmd_output.execute_cmd("set fwd mac")
@@ -819,7 +819,7 @@ class TestCvlQinq(TestCase):
AVF CRC strip and Vlan strip co-exists
"""
pkt = 'Ether(dst="%s",type=0x8100)/Dot1Q(vlan=1,type=0x8100)/Dot1Q(vlan=2,type=0x0800)/IP(src="196.222.232.221")/("X"*480)' % self.vf1_mac
- self.dut.send_expect('ethtool --set-priv-flags %s vf-vlan-prune-disable off' % self.pf_interface, "#")
+ self.dut.send_expect('ethtool --set-priv-flags %s vf-vlan-pruning on' % self.pf_interface, "# ")
self.setup_pf_vfs_env(vfs_num=1)
self.launch_testpmd(vfs_num=1)
self.check_vlan_offload(vlan_type="strip", stats="off")
@@ -873,4 +873,4 @@ class TestCvlQinq(TestCase):
self.destroy_iavf()
def tear_down_all(self):
- self.dut.send_expect('ethtool --set-priv-flags %s vf-vlan-prune-disable off' % self.pf_interface, '#')
\ No newline at end of file
+ self.dut.send_expect('ethtool --set-priv-flags %s vf-vlan-pruning off' % self.pf_interface, '# ')