diff mbox series

[V1,1/2] test_plans/rxtx_offload: add tx offload multi_segs setting

Message ID 1627539383-26588-2-git-send-email-yux.jiang@intel.com (mailing list archive)
State Superseded
Headers
Series add test plan and tests: tx offload multi_segs setting |

Commit Message

Yu Jiang July 29, 2021, 6:16 a.m. UTC 
  add tx offload multi_segs setting

Signed-off-by: Yu Jiang <yux.jiang@intel.com>
---
 test_plans/rxtx_offload_test_plan.rst | 56 +++++++++++++++++++++++++++++++++++
 1 file changed, 56 insertions(+)

Comments

Lin, Xueqin Aug. 2, 2021, 9:29 a.m. UTC | #1 
> -----Original Message-----
> From: dts <dts-bounces@dpdk.org> On Behalf Of Yu Jiang
> Sent: Thursday, July 29, 2021 2:16 PM
> To: dts@dpdk.org
> Cc: Jiang, YuX <yux.jiang@intel.com>
> Subject: [dts] [PATCH V1 1/2] test_plans/rxtx_offload: add tx offload
> multi_segs setting
> 
> add tx offload multi_segs setting
> 
> Signed-off-by: Yu Jiang <yux.jiang@intel.com>
Acked-by: Xueqin Lin <Xueqin.lin@intel.com>
> ---
>  test_plans/rxtx_offload_test_plan.rst | 56
> +++++++++++++++++++++++++++++++++++
>  1 file changed, 56 insertions(+)
> 
> diff --git a/test_plans/rxtx_offload_test_plan.rst
> b/test_plans/rxtx_offload_test_plan.rst
> index 246e1e1..962ee9f 100644
> --- a/test_plans/rxtx_offload_test_plan.rst
> +++ b/test_plans/rxtx_offload_test_plan.rst
> @@ -677,3 +677,59 @@ Test case: FVL Tx offload per-queue setting
> 
>     Note 1: there is no tx_offload per_queue parameter in ixgbe driver,
>     so this case is just only for i40e.
> +
> +Test case: Tx offload multi_segs setting
> +======================================================
> +
> +1. Start testpmd with "--tx-offloads=0x00008000" to enable tx_offload
> multi_segs ::
> +
> +    ./testpmd -c 0xf -n 4  -- -i --tx-offloads==0x00008000
> +    testpmd> show port 0 tx_offload configuration
> +    Tx Offloading Configuration of port 0 :
> +      Port : MULTI_SEGS
> +      Queue[ 0] : MULTI_SEGS
> +
> +2. Set fwd to txonly, Set the length of each segment of the TX-ONLY packets,
> Set the split policy for TX packets, then start to send pkgs::
> +
> +    testpmd> set fwd txonly
> +    testpmd> set txpkts 64,64
> +    testpmd> set txsplit rand
> +    testpmd> start
> +
> +3. Check TX-packets will not hang and continue to increase::
> +    Wait 15s or more, check TX-packets will continue to increase and
> +can be more than 300K
> +
> +    testpmd> show port stats all
> +    testpmd> stop
> +    testpmd> quit
> +
> +4. Start testpmd again without "--tx-offloads", check multi-segs is disabled by
> default::
> +
> +    ./testpmd -c 0xf -n 4  -- -i
> +    testpmd> show port 0 tx_offload configuration
> +    No MULTI_SEGS in Tx Offloading Configuration of ports
> +
> +5. Enable tx_offload multi_segs ::
> +    testpmd> port stop all
> +    testpmd> port config 0 tx_offload multi_segs on
> +    testpmd> port config 1 tx_offload multi_segs on
> +    testpmd> port start all
> +    testpmd> show port 0 tx_offload configuration
> +    Tx Offloading Configuration of port 0 :
> +      Port : MULTI_SEGS
> +      Queue[ 0] : MULTI_SEGS
> +
> +6. Set fwd to txonly, Set the length of each segment of the TX-ONLY packets,
> Set the split policy for TX packets, then start to send pkgs::
> +
> +    testpmd> set fwd txonly
> +    testpmd> set txpkts 64,64
> +    testpmd> set txsplit rand
> +    testpmd> start
> +    testpmd> show port stats all
> +
> +7. Check TX-packets will not hang and continue to increase::
> +    Wait 15s or more, check TX-packets will continue to increase and
> +can be more than 300K
> +
> +    testpmd> show port stats all
> +    testpmd> stop
> +    testpmd> quit
> --
> 2.7.4
Tu, Lijuan Aug. 3, 2021, 6:47 a.m. UTC | #2 
> -----Original Message-----
> From: dts <dts-bounces@dpdk.org> On Behalf Of Lin, Xueqin
> Sent: 2021年8月2日 17:29
> To: Jiang, YuX <yux.jiang@intel.com>; dts@dpdk.org
> Cc: Jiang, YuX <yux.jiang@intel.com>
> Subject: Re: [dts] [PATCH V1 1/2] test_plans/rxtx_offload: add tx offload
> multi_segs setting
> 
> > -----Original Message-----
> > From: dts <dts-bounces@dpdk.org> On Behalf Of Yu Jiang
> > Sent: Thursday, July 29, 2021 2:16 PM
> > To: dts@dpdk.org
> > Cc: Jiang, YuX <yux.jiang@intel.com>
> > Subject: [dts] [PATCH V1 1/2] test_plans/rxtx_offload: add tx offload
> > multi_segs setting
> >
> > add tx offload multi_segs setting
> >
> > Signed-off-by: Yu Jiang <yux.jiang@intel.com>
> Acked-by: Xueqin Lin <Xueqin.lin@intel.com>
> > ---
> >  test_plans/rxtx_offload_test_plan.rst | 56
> > +++++++++++++++++++++++++++++++++++
> >  1 file changed, 56 insertions(+)
> >
> > diff --git a/test_plans/rxtx_offload_test_plan.rst
> > b/test_plans/rxtx_offload_test_plan.rst
> > index 246e1e1..962ee9f 100644
> > --- a/test_plans/rxtx_offload_test_plan.rst
> > +++ b/test_plans/rxtx_offload_test_plan.rst
> > @@ -677,3 +677,59 @@ Test case: FVL Tx offload per-queue setting
> >
> >     Note 1: there is no tx_offload per_queue parameter in ixgbe driver,
> >     so this case is just only for i40e.
> > +
> > +Test case: Tx offload multi_segs setting
> > +======================================================
> > +
> > +1. Start testpmd with "--tx-offloads=0x00008000" to enable tx_offload
> > multi_segs ::
> > +
> > +    ./testpmd -c 0xf -n 4  -- -i --tx-offloads==0x00008000
> > +    testpmd> show port 0 tx_offload configuration
> > +    Tx Offloading Configuration of port 0 :
> > +      Port : MULTI_SEGS
> > +      Queue[ 0] : MULTI_SEGS
> > +
> > +2. Set fwd to txonly, Set the length of each segment of the TX-ONLY
> > +packets,
> > Set the split policy for TX packets, then start to send pkgs::
> > +
> > +    testpmd> set fwd txonly
> > +    testpmd> set txpkts 64,64

It requires packet size larger than mbuf size, else it won't use multi_segs.

> > +    testpmd> set txsplit rand
> > +    testpmd> start
> > +
> > +3. Check TX-packets will not hang and continue to increase::
> > +    Wait 15s or more, check TX-packets will continue to increase and
> > +can be more than 300K
> > +
> > +    testpmd> show port stats all
> > +    testpmd> stop
> > +    testpmd> quit
> > +
> > +4. Start testpmd again without "--tx-offloads", check multi-segs is
> > +disabled by
> > default::
> > +
> > +    ./testpmd -c 0xf -n 4  -- -i
> > +    testpmd> show port 0 tx_offload configuration
> > +    No MULTI_SEGS in Tx Offloading Configuration of ports
> > +
> > +5. Enable tx_offload multi_segs ::
> > +    testpmd> port stop all
> > +    testpmd> port config 0 tx_offload multi_segs on
> > +    testpmd> port config 1 tx_offload multi_segs on
> > +    testpmd> port start all
> > +    testpmd> show port 0 tx_offload configuration
> > +    Tx Offloading Configuration of port 0 :
> > +      Port : MULTI_SEGS
> > +      Queue[ 0] : MULTI_SEGS
> > +
> > +6. Set fwd to txonly, Set the length of each segment of the TX-ONLY
> > +packets,
> > Set the split policy for TX packets, then start to send pkgs::
> > +
> > +    testpmd> set fwd txonly
> > +    testpmd> set txpkts 64,64
> > +    testpmd> set txsplit rand
> > +    testpmd> start
> > +    testpmd> show port stats all
> > +
> > +7. Check TX-packets will not hang and continue to increase::
> > +    Wait 15s or more, check TX-packets will continue to increase and
> > +can be more than 300K
> > +
> > +    testpmd> show port stats all
> > +    testpmd> stop
> > +    testpmd> quit
> > --
> > 2.7.4
Lin, Xueqin Aug. 3, 2021, 10:24 a.m. UTC | #3 
> -----Original Message-----
> From: Tu, Lijuan <lijuan.tu@intel.com>
> Sent: Tuesday, August 3, 2021 2:47 PM
> To: Lin, Xueqin <xueqin.lin@intel.com>; Jiang, YuX <yux.jiang@intel.com>;
> dts@dpdk.org
> Cc: Jiang, YuX <yux.jiang@intel.com>
> Subject: RE: [dts] [PATCH V1 1/2] test_plans/rxtx_offload: add tx offload
> multi_segs setting
> 
> 
> 
> > -----Original Message-----
> > From: dts <dts-bounces@dpdk.org> On Behalf Of Lin, Xueqin
> > Sent: 2021年8月2日 17:29
> > To: Jiang, YuX <yux.jiang@intel.com>; dts@dpdk.org
> > Cc: Jiang, YuX <yux.jiang@intel.com>
> > Subject: Re: [dts] [PATCH V1 1/2] test_plans/rxtx_offload: add tx
> > offload multi_segs setting
> >
> > > -----Original Message-----
> > > From: dts <dts-bounces@dpdk.org> On Behalf Of Yu Jiang
> > > Sent: Thursday, July 29, 2021 2:16 PM
> > > To: dts@dpdk.org
> > > Cc: Jiang, YuX <yux.jiang@intel.com>
> > > Subject: [dts] [PATCH V1 1/2] test_plans/rxtx_offload: add tx
> > > offload multi_segs setting
> > >
> > > add tx offload multi_segs setting
> > >
> > > Signed-off-by: Yu Jiang <yux.jiang@intel.com>
> > Acked-by: Xueqin Lin <Xueqin.lin@intel.com>
> > > ---
> > >  test_plans/rxtx_offload_test_plan.rst | 56
> > > +++++++++++++++++++++++++++++++++++
> > >  1 file changed, 56 insertions(+)
> > >
> > > diff --git a/test_plans/rxtx_offload_test_plan.rst
> > > b/test_plans/rxtx_offload_test_plan.rst
> > > index 246e1e1..962ee9f 100644
> > > --- a/test_plans/rxtx_offload_test_plan.rst
> > > +++ b/test_plans/rxtx_offload_test_plan.rst
> > > @@ -677,3 +677,59 @@ Test case: FVL Tx offload per-queue setting
> > >
> > >     Note 1: there is no tx_offload per_queue parameter in ixgbe driver,
> > >     so this case is just only for i40e.
> > > +
> > > +Test case: Tx offload multi_segs setting
> > > +======================================================
> > > +
> > > +1. Start testpmd with "--tx-offloads=0x00008000" to enable
> > > +tx_offload
> > > multi_segs ::
> > > +
> > > +    ./testpmd -c 0xf -n 4  -- -i --tx-offloads==0x00008000
> > > +    testpmd> show port 0 tx_offload configuration
> > > +    Tx Offloading Configuration of port 0 :
> > > +      Port : MULTI_SEGS
> > > +      Queue[ 0] : MULTI_SEGS
> > > +
> > > +2. Set fwd to txonly, Set the length of each segment of the TX-ONLY
> > > +packets,
> > > Set the split policy for TX packets, then start to send pkgs::
> > > +
> > > +    testpmd> set fwd txonly
> > > +    testpmd> set txpkts 64,64
> 
> It requires packet size larger than mbuf size, else it won't use multi_segs.

Vector path doesn't support multi-segment packet transmit, only normal path supports multi-segment packet transmit.
Use 'port config 0 tx_offload multi_segs on' to enable multi segment offload first.

> 
> > > +    testpmd> set txsplit rand
> > > +    testpmd> start
> > > +
> > > +3. Check TX-packets will not hang and continue to increase::
> > > +    Wait 15s or more, check TX-packets will continue to increase
> > > +and can be more than 300K
> > > +
> > > +    testpmd> show port stats all
> > > +    testpmd> stop
> > > +    testpmd> quit
> > > +
> > > +4. Start testpmd again without "--tx-offloads", check multi-segs is
> > > +disabled by
> > > default::
> > > +
> > > +    ./testpmd -c 0xf -n 4  -- -i
> > > +    testpmd> show port 0 tx_offload configuration
> > > +    No MULTI_SEGS in Tx Offloading Configuration of ports
> > > +
> > > +5. Enable tx_offload multi_segs ::
> > > +    testpmd> port stop all
> > > +    testpmd> port config 0 tx_offload multi_segs on
> > > +    testpmd> port config 1 tx_offload multi_segs on
> > > +    testpmd> port start all
> > > +    testpmd> show port 0 tx_offload configuration
> > > +    Tx Offloading Configuration of port 0 :
> > > +      Port : MULTI_SEGS
> > > +      Queue[ 0] : MULTI_SEGS
> > > +
> > > +6. Set fwd to txonly, Set the length of each segment of the TX-ONLY
> > > +packets,
> > > Set the split policy for TX packets, then start to send pkgs::
> > > +
> > > +    testpmd> set fwd txonly
> > > +    testpmd> set txpkts 64,64
> > > +    testpmd> set txsplit rand
> > > +    testpmd> start
> > > +    testpmd> show port stats all
> > > +
> > > +7. Check TX-packets will not hang and continue to increase::
> > > +    Wait 15s or more, check TX-packets will continue to increase
> > > +and can be more than 300K
> > > +
> > > +    testpmd> show port stats all
> > > +    testpmd> stop
> > > +    testpmd> quit
> > > --
> > > 2.7.4
>
Tu, Lijuan Aug. 3, 2021, 12:35 p.m. UTC | #4 
> -----Original Message-----
> From: Lin, Xueqin <xueqin.lin@intel.com>
> Sent: 2021年8月3日 18:25
> To: Tu, Lijuan <lijuan.tu@intel.com>; Jiang, YuX <yux.jiang@intel.com>;
> dts@dpdk.org
> Cc: Jiang, YuX <yux.jiang@intel.com>
> Subject: RE: [dts] [PATCH V1 1/2] test_plans/rxtx_offload: add tx offload
> multi_segs setting
> 
> > -----Original Message-----
> > From: Tu, Lijuan <lijuan.tu@intel.com>
> > Sent: Tuesday, August 3, 2021 2:47 PM
> > To: Lin, Xueqin <xueqin.lin@intel.com>; Jiang, YuX
> > <yux.jiang@intel.com>; dts@dpdk.org
> > Cc: Jiang, YuX <yux.jiang@intel.com>
> > Subject: RE: [dts] [PATCH V1 1/2] test_plans/rxtx_offload: add tx
> > offload multi_segs setting
> >
> >
> >
> > > -----Original Message-----
> > > From: dts <dts-bounces@dpdk.org> On Behalf Of Lin, Xueqin
> > > Sent: 2021年8月2日 17:29
> > > To: Jiang, YuX <yux.jiang@intel.com>; dts@dpdk.org
> > > Cc: Jiang, YuX <yux.jiang@intel.com>
> > > Subject: Re: [dts] [PATCH V1 1/2] test_plans/rxtx_offload: add tx
> > > offload multi_segs setting
> > >
> > > > -----Original Message-----
> > > > From: dts <dts-bounces@dpdk.org> On Behalf Of Yu Jiang
> > > > Sent: Thursday, July 29, 2021 2:16 PM
> > > > To: dts@dpdk.org
> > > > Cc: Jiang, YuX <yux.jiang@intel.com>
> > > > Subject: [dts] [PATCH V1 1/2] test_plans/rxtx_offload: add tx
> > > > offload multi_segs setting
> > > >
> > > > add tx offload multi_segs setting
> > > >
> > > > Signed-off-by: Yu Jiang <yux.jiang@intel.com>
> > > Acked-by: Xueqin Lin <Xueqin.lin@intel.com>
> > > > ---
> > > >  test_plans/rxtx_offload_test_plan.rst | 56
> > > > +++++++++++++++++++++++++++++++++++
> > > >  1 file changed, 56 insertions(+)
> > > >
> > > > diff --git a/test_plans/rxtx_offload_test_plan.rst
> > > > b/test_plans/rxtx_offload_test_plan.rst
> > > > index 246e1e1..962ee9f 100644
> > > > --- a/test_plans/rxtx_offload_test_plan.rst
> > > > +++ b/test_plans/rxtx_offload_test_plan.rst
> > > > @@ -677,3 +677,59 @@ Test case: FVL Tx offload per-queue setting
> > > >
> > > >     Note 1: there is no tx_offload per_queue parameter in ixgbe driver,
> > > >     so this case is just only for i40e.
> > > > +
> > > > +Test case: Tx offload multi_segs setting
> > > > +======================================================
> > > > +
> > > > +1. Start testpmd with "--tx-offloads=0x00008000" to enable
> > > > +tx_offload
> > > > multi_segs ::
> > > > +
> > > > +    ./testpmd -c 0xf -n 4  -- -i --tx-offloads==0x00008000
> > > > +    testpmd> show port 0 tx_offload configuration
> > > > +    Tx Offloading Configuration of port 0 :
> > > > +      Port : MULTI_SEGS
> > > > +      Queue[ 0] : MULTI_SEGS
> > > > +
> > > > +2. Set fwd to txonly, Set the length of each segment of the
> > > > +TX-ONLY packets,
> > > > Set the split policy for TX packets, then start to send pkgs::
> > > > +
> > > > +    testpmd> set fwd txonly
> > > > +    testpmd> set txpkts 64,64
> >
> > It requires packet size larger than mbuf size, else it won't use multi_segs.

sorry, I misunderstood `set txpkts`
> 
> Vector path doesn't support multi-segment packet transmit, only normal path
> supports multi-segment packet transmit.
> Use 'port config 0 tx_offload multi_segs on' to enable multi segment offload
> first.

Sure, it's not care the vector path.
> 
> >
> > > > +    testpmd> set txsplit rand

`set txpkts 64,64` means the packet has 2 segments, the first one is 64, and the second one is also 64.
`set txsplit rand` means random segment number, here it might be 1 or 2, it is random, so here comes the issue.
If it is 1, it is only 1 segment, so it doesn't validate the MULT_SEG offload feature. Furthemore it has 50% percentage don't validate it.

> > > > +    testpmd> start
> > > > +
> > > > +3. Check TX-packets will not hang and continue to increase::
> > > > +    Wait 15s or more, check TX-packets will continue to increase
> > > > +and can be more than 300K
> > > > +
> > > > +    testpmd> show port stats all
> > > > +    testpmd> stop
> > > > +    testpmd> quit
> > > > +
> > > > +4. Start testpmd again without "--tx-offloads", check multi-segs
> > > > +is disabled by
> > > > default::
> > > > +
> > > > +    ./testpmd -c 0xf -n 4  -- -i
> > > > +    testpmd> show port 0 tx_offload configuration
> > > > +    No MULTI_SEGS in Tx Offloading Configuration of ports
> > > > +
> > > > +5. Enable tx_offload multi_segs ::
> > > > +    testpmd> port stop all
> > > > +    testpmd> port config 0 tx_offload multi_segs on
> > > > +    testpmd> port config 1 tx_offload multi_segs on
> > > > +    testpmd> port start all
> > > > +    testpmd> show port 0 tx_offload configuration
> > > > +    Tx Offloading Configuration of port 0 :
> > > > +      Port : MULTI_SEGS
> > > > +      Queue[ 0] : MULTI_SEGS
> > > > +
> > > > +6. Set fwd to txonly, Set the length of each segment of the
> > > > +TX-ONLY packets,
> > > > Set the split policy for TX packets, then start to send pkgs::
> > > > +
> > > > +    testpmd> set fwd txonly
> > > > +    testpmd> set txpkts 64,64
> > > > +    testpmd> set txsplit rand
> > > > +    testpmd> start
> > > > +    testpmd> show port stats all
> > > > +
> > > > +7. Check TX-packets will not hang and continue to increase::
> > > > +    Wait 15s or more, check TX-packets will continue to increase
> > > > +and can be more than 300K
> > > > +
> > > > +    testpmd> show port stats all
> > > > +    testpmd> stop
> > > > +    testpmd> quit
> > > > --
> > > > 2.7.4
> >
>
diff mbox series

Patch

diff --git a/test_plans/rxtx_offload_test_plan.rst b/test_plans/rxtx_offload_test_plan.rst
index 246e1e1..962ee9f 100644
--- a/test_plans/rxtx_offload_test_plan.rst
+++ b/test_plans/rxtx_offload_test_plan.rst
@@ -677,3 +677,59 @@  Test case: FVL Tx offload per-queue setting
 
    Note 1: there is no tx_offload per_queue parameter in ixgbe driver,
    so this case is just only for i40e.
+
+Test case: Tx offload multi_segs setting
+======================================================
+
+1. Start testpmd with "--tx-offloads=0x00008000" to enable tx_offload multi_segs ::
+
+    ./testpmd -c 0xf -n 4  -- -i --tx-offloads==0x00008000
+    testpmd> show port 0 tx_offload configuration
+    Tx Offloading Configuration of port 0 :
+      Port : MULTI_SEGS
+      Queue[ 0] : MULTI_SEGS
+
+2. Set fwd to txonly, Set the length of each segment of the TX-ONLY packets, Set the split policy for TX packets, then start to send pkgs::
+
+    testpmd> set fwd txonly
+    testpmd> set txpkts 64,64
+    testpmd> set txsplit rand
+    testpmd> start
+
+3. Check TX-packets will not hang and continue to increase::
+    Wait 15s or more, check TX-packets will continue to increase and can be more than 300K
+
+    testpmd> show port stats all
+    testpmd> stop
+    testpmd> quit
+
+4. Start testpmd again without "--tx-offloads", check multi-segs is disabled by default::
+
+    ./testpmd -c 0xf -n 4  -- -i
+    testpmd> show port 0 tx_offload configuration
+    No MULTI_SEGS in Tx Offloading Configuration of ports
+
+5. Enable tx_offload multi_segs ::
+    testpmd> port stop all
+    testpmd> port config 0 tx_offload multi_segs on
+    testpmd> port config 1 tx_offload multi_segs on
+    testpmd> port start all
+    testpmd> show port 0 tx_offload configuration
+    Tx Offloading Configuration of port 0 :
+      Port : MULTI_SEGS
+      Queue[ 0] : MULTI_SEGS
+
+6. Set fwd to txonly, Set the length of each segment of the TX-ONLY packets, Set the split policy for TX packets, then start to send pkgs::
+
+    testpmd> set fwd txonly
+    testpmd> set txpkts 64,64
+    testpmd> set txsplit rand
+    testpmd> start
+    testpmd> show port stats all
+
+7. Check TX-packets will not hang and continue to increase::
+    Wait 15s or more, check TX-packets will continue to increase and can be more than 300K
+
+    testpmd> show port stats all
+    testpmd> stop
+    testpmd> quit