[v2,25/54] net/e1000/base: fix semaphore timeout value
Checks
Commit Message
From: Pawel Malinowski <pawel.malinowski@intel.com>
According to datasheet software ownership of SWSM.SWESMBI bit should not
exceed 100ms. Current implementation caused incorrect timeout counter
values, where each iteration equals 50us delay. Because of that driver was
allowed to wait for semaphore even for 1,5s. This might trigger DPC
timeout.
This implementation hardcodes value to 2000, which multiplied by 50us,
gives 100ms of possible wait time.
Fixes: af75078fece3 ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Pawel Malinowski <pawel.malinowski@intel.com>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
---
drivers/net/intel/e1000/base/e1000_defines.h | 1 +
drivers/net/intel/e1000/base/e1000_i225.c | 2 +-
drivers/net/intel/e1000/base/e1000_mac.c | 2 +-
3 files changed, 3 insertions(+), 2 deletions(-)
@@ -521,6 +521,7 @@
/* SW Semaphore Register */
#define E1000_SWSM_SMBI 0x00000001 /* Driver Semaphore bit */
#define E1000_SWSM_SWESMBI 0x00000002 /* FW Semaphore bit */
+#define E1000_SWSM_TIMEOUT 2000 /* Driver Semaphore max timeout counter */
#define E1000_SWSM_DRV_LOAD 0x00000008 /* Driver Loaded Bit */
#define E1000_SWSM2_LOCK 0x00000002 /* Secondary driver semaphore bit */
@@ -395,7 +395,7 @@ s32 e1000_setup_copper_link_i225(struct e1000_hw *hw)
static s32 e1000_get_hw_semaphore_i225(struct e1000_hw *hw)
{
u32 swsm;
- s32 timeout = hw->nvm.word_size + 1;
+ s32 timeout = E1000_SWSM_TIMEOUT;
s32 i = 0;
DEBUGFUNC("e1000_get_hw_semaphore_i225");
@@ -1702,7 +1702,7 @@ s32 e1000_get_speed_and_duplex_fiber_serdes_generic(struct e1000_hw E1000_UNUSED
s32 e1000_get_hw_semaphore_generic(struct e1000_hw *hw)
{
u32 swsm;
- s32 timeout = hw->nvm.word_size + 1;
+ s32 timeout = E1000_SWSM_TIMEOUT;
s32 i = 0;
DEBUGFUNC("e1000_get_hw_semaphore_generic");