[RFC,1/2] lib/ethdev: Add link_speed lanes support into rte lib
Checks
Commit Message
Update the eth_dev_ops structure with new function vectors
to get and set number of speed lanes. This will help user to
configure the same fixed speed with different number of lanes
based on the physical carrier type.
Signed-off-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
---
lib/ethdev/ethdev_driver.h | 49 +++++++++++++++++++++++++++++++++++
lib/ethdev/rte_ethdev.c | 26 +++++++++++++++++++
lib/ethdev/rte_ethdev.h | 52 ++++++++++++++++++++++++++++++++++++++
lib/ethdev/version.map | 2 ++
4 files changed, 129 insertions(+)
@@ -1179,6 +1179,51 @@ typedef int (*eth_rx_descriptor_dump_t)(const struct rte_eth_dev *dev,
uint16_t queue_id, uint16_t offset,
uint16_t num, FILE *file);
+/**
+ * @internal
+ * Get number of current active lanes and max supported lanes
+ *
+ * @param dev
+ * ethdev handle of port.
+ * @param speed_lanes_capa
+ * Number of active lanes that the link is trained up.
+ * Max number of lanes supported by HW
+ * @return
+ * Negative errno value on error, 0 on success.
+ *
+ * @retval 0
+ * Success, get speed_lanes data success.
+ * @retval -ENOTSUP
+ * Operation is not supported.
+ * @retval -EIO
+ * Device is removed.
+ */
+typedef int (*eth_speed_lanes_get_t)(struct rte_eth_dev *dev,
+ struct rte_eth_speed_lanes_capa *speed_lanes_capa);
+
+/**
+ * @internal
+ * Set speed lanes
+ *
+ * @param dev
+ * ethdev handle of port.
+ * @param speed_lanes_capa
+ * Non-negative number of lanes
+ *
+ * @return
+ * Negative errno value on error, 0 on success.
+ *
+ * @retval 0
+ * Success, set lanes success.
+ * @retval -ENOTSUP
+ * Operation is not supported.
+ * @retval -EINVAL
+ * Unsupported mode requested.
+ * @retval -EIO
+ * Device is removed.
+ */
+typedef int (*eth_speed_lanes_set_t)(struct rte_eth_dev *dev, uint32_t speed_lanes_capa);
+
/**
* @internal
* Dump Tx descriptor info to a file.
@@ -1474,6 +1519,10 @@ struct eth_dev_ops {
eth_count_aggr_ports_t count_aggr_ports;
/** Map a Tx queue with an aggregated port of the DPDK port */
eth_map_aggr_tx_affinity_t map_aggr_tx_affinity;
+ /** Get number of speed lanes supported and active lanes */
+ eth_speed_lanes_get_t speed_lanes_get;
+ /** Set number of speed lanes */
+ eth_speed_lanes_set_t speed_lanes_set;
};
/**
@@ -7008,4 +7008,30 @@ int rte_eth_dev_map_aggr_tx_affinity(uint16_t port_id, uint16_t tx_queue_id,
return ret;
}
+int
+rte_eth_speed_lanes_get(uint16_t port_id, struct rte_eth_speed_lanes_capa *capa)
+{
+ struct rte_eth_dev *dev;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+ dev = &rte_eth_devices[port_id];
+
+ if (*dev->dev_ops->speed_lanes_get == NULL)
+ return -ENOTSUP;
+ return eth_err(port_id, (*dev->dev_ops->speed_lanes_get)(dev, capa));
+}
+
+int
+rte_eth_speed_lanes_set(uint16_t port_id, uint32_t speed_lanes_capa)
+{
+ struct rte_eth_dev *dev;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+ dev = &rte_eth_devices[port_id];
+
+ if (*dev->dev_ops->speed_lanes_set == NULL)
+ return -ENOTSUP;
+ return eth_err(port_id, (*dev->dev_ops->speed_lanes_set)(dev, speed_lanes_capa));
+}
+
RTE_LOG_REGISTER_DEFAULT(rte_eth_dev_logtype, INFO);
@@ -1997,6 +1997,12 @@ struct rte_eth_fec_capa {
uint32_t capa; /**< FEC capabilities bitmask */
};
+/* A structure used to get and set lanes capabilities per link speed */
+struct rte_eth_speed_lanes_capa {
+ uint32_t active_lanes;
+ uint32_t max_lanes_cap;
+};
+
#define RTE_ETH_ALL RTE_MAX_ETHPORTS
/* Macros to check for valid port */
@@ -6917,6 +6923,52 @@ rte_eth_tx_queue_count(uint16_t port_id, uint16_t queue_id)
return rc;
}
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change, or be removed, without prior notice
+ *
+ * Get maximum speed lanes supported by the NIC.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param speed_lanes_capa
+ * speed_lanes_capa is out only with max speed lanes capabilities.
+ * If set to NULL, then its assumed zero or not supported.
+ *
+ * @return
+ * - A non-negative value of active lanes that currently link is up with.
+ * - A non-negative value that this HW scales up to for all speeds.
+ * - (-ENOTSUP) if underlying hardware OR driver doesn't support.
+ * that operation.
+ * - (-EIO) if device is removed.
+ * - (-ENODEV) if *port_id* invalid.
+ * - (-EINVAL) if *speed_lanes_capa* invalid
+ */
+__rte_experimental
+int rte_eth_speed_lanes_get(uint16_t port_id, struct rte_eth_speed_lanes_capa *capa);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change, or be removed, without prior notice
+ *
+ * Set speed lanes supported by the NIC.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param speed_lanes
+ * speed_lanes a non-zero value of number lanes for this speeds.
+ *
+ * @return
+ * - (>=0) valid input and supported by driver or hardware.
+ * - (-ENOTSUP) if underlying hardware OR driver doesn't support.
+ * that operation.
+ * - (-EIO) if device is removed.
+ * - (-ENODEV) if *port_id* invalid.
+ * - (-EINVAL) if *speed_lanes* invalid
+ */
+__rte_experimental
+int rte_eth_speed_lanes_set(uint16_t port_id, uint32_t speed_lanes_capa);
+
#ifdef __cplusplus
}
#endif
@@ -325,6 +325,8 @@ EXPERIMENTAL {
rte_flow_template_table_resizable;
rte_flow_template_table_resize;
rte_flow_template_table_resize_complete;
+ rte_eth_speed_lanes_get;
+ rte_eth_speed_lanes_set;
};
INTERNAL {