diff mbox series

[12/14] net/bnxt: retry HWRM ver get if the command fails

Message ID 20231204183710.86921-13-ajit.khaparde@broadcom.com (mailing list archive)
State Superseded, archived
Delegated to: Ajit Khaparde
Headers
Series support new 5760X P7 devices |

Checks

Context Check Description
ci/checkpatch success coding style OK

Commit Message

Ajit Khaparde Dec. 4, 2023, 6:37 p.m. UTC 
  Retry HWRM ver get if the command timesout because of PCI FLR.
When the PCI driver issues an FLR during device initialization,
the firmware may have to block the PXP target traffic till the FLR
is complete.

HWRM_VER_GET command issued during that window may time out.
So retry the command again in such a scenario.

Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
---
 drivers/net/bnxt/bnxt.h        |  1 +
 drivers/net/bnxt/bnxt_ethdev.c | 12 +++++++++++-
 2 files changed, 12 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/net/bnxt/bnxt.h b/drivers/net/bnxt/bnxt.h
index f7a60eb9a1..7aed4c3da3 100644
--- a/drivers/net/bnxt/bnxt.h
+++ b/drivers/net/bnxt/bnxt.h
@@ -879,6 +879,7 @@  struct bnxt {
 
 	 /* default command timeout value of 500ms */
 #define DFLT_HWRM_CMD_TIMEOUT		500000
+#define PCI_FUNC_RESET_WAIT_TIMEOUT	1500000
 	 /* short command timeout value of 50ms */
 #define SHORT_HWRM_CMD_TIMEOUT		50000
 	/* default HWRM request timeout value */
diff --git a/drivers/net/bnxt/bnxt_ethdev.c b/drivers/net/bnxt/bnxt_ethdev.c
index 8f3bd858da..0ae6697940 100644
--- a/drivers/net/bnxt/bnxt_ethdev.c
+++ b/drivers/net/bnxt/bnxt_ethdev.c
@@ -5442,6 +5442,7 @@  static int bnxt_map_hcomm_fw_status_reg(struct bnxt *bp)
 static int bnxt_get_config(struct bnxt *bp)
 {
 	uint16_t mtu;
+	int timeout;
 	int rc = 0;
 
 	bp->fw_cap = 0;
@@ -5450,8 +5451,17 @@  static int bnxt_get_config(struct bnxt *bp)
 	if (rc)
 		return rc;
 
-	rc = bnxt_hwrm_ver_get(bp, DFLT_HWRM_CMD_TIMEOUT);
+	timeout = BNXT_CHIP_P7(bp) ?
+		  PCI_FUNC_RESET_WAIT_TIMEOUT :
+		  DFLT_HWRM_CMD_TIMEOUT;
+try_again:
+	rc = bnxt_hwrm_ver_get(bp, timeout);
 	if (rc) {
+		if (rc == -ETIMEDOUT && timeout == PCI_FUNC_RESET_WAIT_TIMEOUT) {
+			bp->flags &= ~BNXT_FLAG_FW_TIMEDOUT;
+			timeout = DFLT_HWRM_CMD_TIMEOUT;
+			goto try_again;
+		}
 		bnxt_check_fw_status(bp);
 		return rc;
 	}