@@ -1421,7 +1421,7 @@ mlx5dr_match_template_create(const struct rte_flow_item items[],
if (ret <= 0) {
DR_LOG(ERR, "Unable to process items (%s): %s",
error.message ? error.message : "unspecified",
- strerror(rte_errno));
+ rte_strerror(rte_errno));
goto free_template;
}
@@ -398,7 +398,7 @@ mlx5_link_update_unlocked_gset(struct rte_eth_dev *dev,
ret = mlx5_ifreq(dev, SIOCGIFFLAGS, &ifr);
if (ret) {
DRV_LOG(WARNING, "port %u ioctl(SIOCGIFFLAGS) failed: %s",
- dev->data->port_id, strerror(rte_errno));
+ dev->data->port_id, rte_strerror(rte_errno));
return ret;
}
dev_link = (struct rte_eth_link) {
@@ -435,7 +435,7 @@ mlx5_link_update_unlocked_gset(struct rte_eth_dev *dev,
DRV_LOG(WARNING,
"port %u ioctl(SIOCETHTOOL,"
" ETHTOOL_GSET) failed: %s",
- dev->data->port_id, strerror(rte_errno));
+ dev->data->port_id, rte_strerror(rte_errno));
return ret;
}
}
@@ -490,7 +490,7 @@ mlx5_link_update_unlocked_gs(struct rte_eth_dev *dev,
ret = mlx5_ifreq(dev, SIOCGIFFLAGS, &ifr);
if (ret) {
DRV_LOG(WARNING, "port %u ioctl(SIOCGIFFLAGS) failed: %s",
- dev->data->port_id, strerror(rte_errno));
+ dev->data->port_id, rte_strerror(rte_errno));
return ret;
}
dev_link = (struct rte_eth_link) {
@@ -525,7 +525,7 @@ mlx5_link_update_unlocked_gs(struct rte_eth_dev *dev,
DRV_LOG(DEBUG,
"port %u ioctl(SIOCETHTOOL,"
" ETHTOOL_GLINKSETTINGS) failed: %s",
- dev->data->port_id, strerror(rte_errno));
+ dev->data->port_id, rte_strerror(rte_errno));
return ret;
}
}
@@ -543,7 +543,7 @@ mlx5_link_update_unlocked_gs(struct rte_eth_dev *dev,
DRV_LOG(DEBUG,
"port %u ioctl(SIOCETHTOOL,"
"ETHTOOL_GLINKSETTINGS) failed: %s",
- dev->data->port_id, strerror(rte_errno));
+ dev->data->port_id, rte_strerror(rte_errno));
return ret;
}
dev_link.link_speed = (ecmd->speed == UINT32_MAX) ?
@@ -674,7 +674,7 @@ mlx5_dev_get_flow_ctrl(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
DRV_LOG(WARNING,
"port %u ioctl(SIOCETHTOOL, ETHTOOL_GPAUSEPARAM) failed:"
" %s",
- dev->data->port_id, strerror(rte_errno));
+ dev->data->port_id, rte_strerror(rte_errno));
return ret;
}
fc_conf->autoneg = ethpause.autoneg;
@@ -727,7 +727,7 @@ mlx5_dev_set_flow_ctrl(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
DRV_LOG(WARNING,
"port %u ioctl(SIOCETHTOOL, ETHTOOL_SPAUSEPARAM)"
" failed: %s",
- dev->data->port_id, strerror(rte_errno));
+ dev->data->port_id, rte_strerror(rte_errno));
return ret;
}
return 0;
@@ -1209,7 +1209,7 @@ mlx5_get_module_info(struct rte_eth_dev *dev,
ret = mlx5_ifreq(dev, SIOCETHTOOL, &ifr);
if (ret) {
DRV_LOG(WARNING, "port %u ioctl(SIOCETHTOOL) failed: %s",
- dev->data->port_id, strerror(rte_errno));
+ dev->data->port_id, rte_strerror(rte_errno));
return ret;
}
modinfo->type = info.type;
@@ -1258,7 +1258,7 @@ int mlx5_get_module_eeprom(struct rte_eth_dev *dev,
ret = mlx5_ifreq(dev, SIOCETHTOOL, &ifr);
if (ret)
DRV_LOG(WARNING, "port %u ioctl(SIOCETHTOOL) failed: %s",
- dev->data->port_id, strerror(rte_errno));
+ dev->data->port_id, rte_strerror(rte_errno));
else
rte_memcpy(info->data, eeprom->data, info->length);
mlx5_free(eeprom);
@@ -1662,7 +1662,7 @@ mlx5_os_stats_init(struct rte_eth_dev *dev)
ret = mlx5_os_read_dev_counters(dev, xstats_ctrl->base);
if (ret)
DRV_LOG(ERR, "port %u cannot read device counters: %s",
- dev->data->port_id, strerror(rte_errno));
+ dev->data->port_id, rte_strerror(rte_errno));
mlx5_os_read_dev_stat(priv, "out_of_buffer", &stats_ctrl->imissed_base);
stats_ctrl->imissed = 0;
free:
@@ -1176,7 +1176,7 @@ mlx5_dev_spawn(struct rte_device *dpdk_dev,
err = mlx5_glue->query_port(sh->cdev->ctx, spawn->phys_port,
&port_attr);
if (err) {
- DRV_LOG(ERR, "port query failed: %s", strerror(err));
+ DRV_LOG(ERR, "port query failed: %s", rte_strerror(err));
goto error;
}
if (port_attr.link_layer != IBV_LINK_LAYER_ETHERNET) {
@@ -1191,7 +1191,7 @@ mlx5_dev_spawn(struct rte_device *dpdk_dev,
spawn->phys_port);
if (err < 0) {
DRV_LOG(INFO, "Failed to get netlink port state: %s",
- strerror(rte_errno));
+ rte_strerror(rte_errno));
err = -rte_errno;
goto error;
}
@@ -1342,7 +1342,7 @@ mlx5_dev_spawn(struct rte_device *dpdk_dev,
if (err) {
err = rte_errno;
DRV_LOG(ERR, "unable to allocate switch domain: %s",
- strerror(rte_errno));
+ rte_strerror(rte_errno));
goto error;
}
own_domain_id = 1;
@@ -1433,7 +1433,7 @@ mlx5_dev_spawn(struct rte_device *dpdk_dev,
if (err) {
err = rte_errno;
DRV_LOG(ERR, "Failed to process port configure: %s",
- strerror(rte_errno));
+ rte_strerror(rte_errno));
goto error;
}
eth_dev = rte_eth_dev_allocate(name);
@@ -1479,7 +1479,7 @@ mlx5_dev_spawn(struct rte_device *dpdk_dev,
DRV_LOG(ERR,
"port %u cannot get MAC address, is mlx5_en"
" loaded? (errno: %s)",
- eth_dev->data->port_id, strerror(rte_errno));
+ eth_dev->data->port_id, rte_strerror(rte_errno));
err = ENODEV;
goto error;
}
@@ -1973,7 +1973,7 @@ mlx5_device_bond_pci_match(const char *ibdev_name,
bond_info->ifname);
if (ret)
DRV_LOG(ERR, "unable to get bond info: %s",
- strerror(rte_errno));
+ rte_strerror(rte_errno));
else
DRV_LOG(INFO, "PF device %u, bond device %u(%s)",
ifindex, bond_info->ifindex, bond_info->ifname);
@@ -2688,7 +2688,7 @@ mlx5_os_pci_probe_pf(struct mlx5_common_device *cdev,
" encountering an error: %s",
owner_pci.domain, owner_pci.bus,
owner_pci.devid, owner_pci.function,
- strerror(rte_errno));
+ rte_strerror(rte_errno));
ret = -rte_errno;
/* Roll back. */
while (i--) {
@@ -2868,13 +2868,13 @@ mlx5_os_net_probe(struct mlx5_common_device *cdev,
ret = mlx5_init_once();
if (ret) {
DRV_LOG(ERR, "Unable to init PMD global data: %s",
- strerror(rte_errno));
+ rte_strerror(rte_errno));
return -rte_errno;
}
ret = mlx5_probe_again_args_validate(cdev, mkvlist);
if (ret) {
DRV_LOG(ERR, "Probe again parameters are not compatible : %s",
- strerror(rte_errno));
+ rte_strerror(rte_errno));
return -rte_errno;
}
if (mlx5_dev_is_pci(cdev->dev))
@@ -61,13 +61,13 @@ mlx5_pmd_socket_handle(void *cb __rte_unused)
/* Accept the connection from the client. */
conn_sock = accept(server_socket, NULL, NULL);
if (conn_sock < 0) {
- DRV_LOG(WARNING, "connection failed: %s", strerror(errno));
+ DRV_LOG(WARNING, "connection failed: %s", rte_strerror(errno));
return;
}
ret = recvmsg(conn_sock, &msg, MSG_WAITALL);
if (ret != sizeof(struct mlx5_flow_dump_req)) {
DRV_LOG(WARNING, "wrong message received: %s",
- strerror(errno));
+ rte_strerror(errno));
goto error;
}
@@ -138,7 +138,7 @@ mlx5_pmd_socket_handle(void *cb __rte_unused)
} while (ret < 0 && errno == EINTR);
if (ret < 0)
DRV_LOG(WARNING, "failed to send response %s",
- strerror(errno));
+ rte_strerror(errno));
error:
if (conn_sock >= 0)
close(conn_sock);
@@ -167,7 +167,7 @@ mlx5_pmd_socket_init(void)
ret = socket(AF_UNIX, SOCK_STREAM, 0);
if (ret < 0) {
DRV_LOG(WARNING, "Failed to open mlx5 socket: %s",
- strerror(errno));
+ rte_strerror(errno));
goto error;
}
server_socket = ret;
@@ -183,13 +183,13 @@ mlx5_pmd_socket_init(void)
ret = bind(server_socket, (const struct sockaddr *)&sun, sizeof(sun));
if (ret < 0) {
DRV_LOG(WARNING,
- "cannot bind mlx5 socket: %s", strerror(errno));
+ "cannot bind mlx5 socket: %s", rte_strerror(errno));
goto remove;
}
ret = listen(server_socket, 0);
if (ret < 0) {
DRV_LOG(WARNING, "cannot listen on mlx5 socket: %s",
- strerror(errno));
+ rte_strerror(errno));
goto remove;
}
server_intr_handle = mlx5_os_interrupt_handler_create
@@ -197,7 +197,7 @@ mlx5_pmd_socket_init(void)
server_socket, mlx5_pmd_socket_handle, NULL);
if (server_intr_handle == NULL) {
DRV_LOG(WARNING, "cannot register interrupt handler for mlx5 socket: %s",
- strerror(errno));
+ rte_strerror(errno));
goto remove;
}
return 0;
@@ -207,7 +207,7 @@ mlx5_pmd_socket_init(void)
claim_zero(close(server_socket));
server_socket = -1;
error:
- DRV_LOG(ERR, "Cannot initialize socket: %s", strerror(errno));
+ DRV_LOG(ERR, "Cannot initialize socket: %s", rte_strerror(errno));
return -errno;
}
@@ -100,7 +100,7 @@ mlx5_ibv_modify_qp(struct mlx5_txq_obj *obj, enum mlx5_txq_modify_type type,
ret = mlx5_glue->modify_qp(obj->qp, &mod, IBV_QP_STATE);
if (ret) {
DRV_LOG(ERR, "Cannot change Tx QP state to RESET %s",
- strerror(errno));
+ rte_strerror(errno));
rte_errno = errno;
return ret;
}
@@ -111,7 +111,7 @@ mlx5_ibv_modify_qp(struct mlx5_txq_obj *obj, enum mlx5_txq_modify_type type,
ret = mlx5_glue->modify_qp(obj->qp, &mod, IBV_QP_STATE | IBV_QP_PORT);
if (ret) {
DRV_LOG(ERR, "Cannot change Tx QP state to INIT %s",
- strerror(errno));
+ rte_strerror(errno));
rte_errno = errno;
return ret;
}
@@ -119,7 +119,7 @@ mlx5_ibv_modify_qp(struct mlx5_txq_obj *obj, enum mlx5_txq_modify_type type,
ret = mlx5_glue->modify_qp(obj->qp, &mod, IBV_QP_STATE);
if (ret) {
DRV_LOG(ERR, "Cannot change Tx QP state to RTR %s",
- strerror(errno));
+ rte_strerror(errno));
rte_errno = errno;
return ret;
}
@@ -127,7 +127,7 @@ mlx5_ibv_modify_qp(struct mlx5_txq_obj *obj, enum mlx5_txq_modify_type type,
ret = mlx5_glue->modify_qp(obj->qp, &mod, IBV_QP_STATE);
if (ret) {
DRV_LOG(ERR, "Cannot change Tx QP state to RTS %s",
- strerror(errno));
+ rte_strerror(errno));
rte_errno = errno;
return ret;
}
@@ -1504,7 +1504,7 @@ mlx5_shared_dev_ctx_args_config(struct mlx5_dev_ctx_shared *sh,
mlx5_dev_args_check_handler, config);
if (ret) {
DRV_LOG(ERR, "Failed to process device arguments: %s",
- strerror(rte_errno));
+ rte_strerror(rte_errno));
return -rte_errno;
}
}
@@ -1756,7 +1756,7 @@ mlx5_alloc_shared_dev_ctx(const struct mlx5_dev_spawn_data *spawn,
err = mlx5_shared_dev_ctx_args_config(sh, mkvlist, &sh->config);
if (err) {
DRV_LOG(ERR, "Failed to process device configure: %s",
- strerror(rte_errno));
+ rte_strerror(rte_errno));
goto error;
}
sh->refcnt = 1;
@@ -2716,7 +2716,7 @@ mlx5_port_args_config(struct mlx5_priv *priv, struct mlx5_kvargs_ctrl *mkvlist,
mlx5_port_args_check_handler, config);
if (ret) {
DRV_LOG(ERR, "Failed to process port arguments: %s",
- strerror(rte_errno));
+ rte_strerror(rte_errno));
return -rte_errno;
}
}
@@ -2947,7 +2947,7 @@ mlx5_probe_again_args_validate(struct mlx5_common_device *cdev,
ret = mlx5_shared_dev_ctx_args_config(sh, mkvlist, config);
if (ret) {
DRV_LOG(ERR, "Failed to process device configure: %s",
- strerror(rte_errno));
+ rte_strerror(rte_errno));
mlx5_free(config);
return ret;
}
@@ -134,7 +134,7 @@ mlx5_txq_devx_modify(struct mlx5_txq_obj *obj, enum mlx5_txq_modify_type type,
ret = mlx5_devx_cmd_modify_sq(obj->sq_obj.sq, &msq_attr);
if (ret) {
DRV_LOG(ERR, "Cannot change the Tx SQ state to RESET"
- " %s", strerror(errno));
+ " %s", rte_strerror(errno));
rte_errno = errno;
return ret;
}
@@ -146,7 +146,7 @@ mlx5_txq_devx_modify(struct mlx5_txq_obj *obj, enum mlx5_txq_modify_type type,
ret = mlx5_devx_cmd_modify_sq(obj->sq_obj.sq, &msq_attr);
if (ret) {
DRV_LOG(ERR, "Cannot change the Tx SQ state to READY"
- " %s", strerror(errno));
+ " %s", rte_strerror(errno));
rte_errno = errno;
return ret;
}
@@ -100,7 +100,7 @@ mlx5_mac_addr_remove(struct rte_eth_dev *dev, uint32_t index)
ret = mlx5_traffic_restart(dev);
if (ret)
DRV_LOG(ERR, "port %u cannot restart traffic: %s",
- dev->data->port_id, strerror(rte_errno));
+ dev->data->port_id, rte_strerror(rte_errno));
}
}
@@ -44,7 +44,7 @@ mlx5_promiscuous_enable(struct rte_eth_dev *dev)
ret = mlx5_traffic_restart(dev);
if (ret)
DRV_LOG(ERR, "port %u cannot enable promiscuous mode: %s",
- dev->data->port_id, strerror(rte_errno));
+ dev->data->port_id, rte_strerror(rte_errno));
/*
* rte_eth_dev_promiscuous_enable() rollback
@@ -77,7 +77,7 @@ mlx5_promiscuous_disable(struct rte_eth_dev *dev)
ret = mlx5_traffic_restart(dev);
if (ret)
DRV_LOG(ERR, "port %u cannot disable promiscuous mode: %s",
- dev->data->port_id, strerror(rte_errno));
+ dev->data->port_id, rte_strerror(rte_errno));
/*
* rte_eth_dev_promiscuous_disable() rollback
@@ -117,7 +117,7 @@ mlx5_allmulticast_enable(struct rte_eth_dev *dev)
ret = mlx5_traffic_restart(dev);
if (ret)
DRV_LOG(ERR, "port %u cannot enable allmulicast mode: %s",
- dev->data->port_id, strerror(rte_errno));
+ dev->data->port_id, rte_strerror(rte_errno));
error:
/*
* rte_eth_allmulticast_enable() rollback
@@ -150,7 +150,7 @@ mlx5_allmulticast_disable(struct rte_eth_dev *dev)
ret = mlx5_traffic_restart(dev);
if (ret)
DRV_LOG(ERR, "port %u cannot disable allmulicast mode: %s",
- dev->data->port_id, strerror(rte_errno));
+ dev->data->port_id, rte_strerror(rte_errno));
error:
/*
* rte_eth_allmulticast_disable() rollback
@@ -488,7 +488,7 @@ mlx5_rx_queue_stop_primary(struct rte_eth_dev *dev, uint16_t idx)
ret = priv->obj_ops.rxq_obj_modify(rxq, MLX5_RXQ_MOD_RDY2RST);
if (ret) {
DRV_LOG(ERR, "Cannot change Rx WQ state to RESET: %s",
- strerror(errno));
+ rte_strerror(errno));
rte_errno = errno;
return ret;
}
@@ -587,7 +587,7 @@ mlx5_rx_queue_start_primary(struct rte_eth_dev *dev, uint16_t idx)
ret = priv->obj_ops.rxq_obj_modify(rxq, MLX5_RXQ_MOD_RST2RDY);
if (ret) {
DRV_LOG(ERR, "Cannot change Rx WQ state to READY: %s",
- strerror(errno));
+ rte_strerror(errno));
rte_errno = errno;
return ret;
}
@@ -378,7 +378,7 @@ mlx5_queue_state_modify_primary(struct rte_eth_dev *dev,
ret = priv->obj_ops.rxq_obj_modify(rxq, sm->state);
if (ret) {
DRV_LOG(ERR, "Cannot change Rx WQ state to %u - %s",
- sm->state, strerror(errno));
+ sm->state, rte_strerror(errno));
rte_errno = errno;
return ret;
}
@@ -233,7 +233,7 @@ mlx5_xstats_reset(struct rte_eth_dev *dev)
stats_n = mlx5_os_get_stats_n(dev);
if (stats_n < 0) {
DRV_LOG(ERR, "port %u cannot get stats: %s", dev->data->port_id,
- strerror(-stats_n));
+ rte_strerror(-stats_n));
return stats_n;
}
if (xstats_ctrl->stats_n != stats_n)
@@ -251,7 +251,7 @@ mlx5_xstats_reset(struct rte_eth_dev *dev)
ret = mlx5_os_read_dev_counters(dev, counters);
if (ret) {
DRV_LOG(ERR, "port %u cannot read device counters: %s",
- dev->data->port_id, strerror(rte_errno));
+ dev->data->port_id, rte_strerror(rte_errno));
mlx5_free(counters);
return ret;
}
@@ -199,13 +199,13 @@ mlx5_test_extend_devargs(char *identifier, char *extend)
socket_fd = socket(AF_UNIX, SOCK_SEQPACKET, 0);
if (socket_fd < 0) {
TESTPMD_LOG(ERR, "Failed to create unix socket: %s\n",
- strerror(errno));
+ rte_strerror(errno));
return -1;
}
rte_strlcpy(un.sun_path, path, sizeof(un.sun_path));
if (connect(socket_fd, (struct sockaddr *)&un, sizeof(un)) < 0) {
TESTPMD_LOG(ERR, "Failed to connect %s: %s\n", un.sun_path,
- strerror(errno));
+ rte_strerror(errno));
close(socket_fd);
return -1;
}
@@ -216,7 +216,7 @@ mlx5_test_extend_devargs(char *identifier, char *extend)
} while (ret < 0 && errno == EINTR);
if (ret < 0) {
TESTPMD_LOG(ERR, "Failed to send request to (%s): %s\n", path,
- strerror(errno));
+ rte_strerror(errno));
close(socket_fd);
return -1;
}
@@ -333,7 +333,7 @@ static void cmd_port_host_shaper_parsed(void *parsed_result,
ret = mlx5_test_set_port_host_shaper(res->port_num, res->fr,
res->rate_num);
if (ret < 0)
- printf("cmd_port_host_shaper error: (%s)\n", strerror(-ret));
+ printf("cmd_port_host_shaper error: (%s)\n", rte_strerror(-ret));
}
static cmdline_parse_token_string_t cmd_port_host_shaper_mlx5 =
@@ -492,7 +492,7 @@ mlx5_cmd_map_ext_rxq_parsed(void *parsed_result,
res->sw_queue_id);
break;
default:
- fprintf(stderr, "programming error: (%s)\n", strerror(-ret));
+ fprintf(stderr, "programming error: (%s)\n", rte_strerror(-ret));
}
}
@@ -565,7 +565,7 @@ mlx5_cmd_unmap_ext_rxq_parsed(void *parsed_result,
fprintf(stderr, "function not implemented or supported\n");
break;
default:
- fprintf(stderr, "programming error: (%s)\n", strerror(-ret));
+ fprintf(stderr, "programming error: (%s)\n", rte_strerror(-ret));
}
}
@@ -648,7 +648,7 @@ mlx5_cmd_set_flow_engine_mode_parsed(void *parsed_result,
if (ret < 0)
fprintf(stderr, "Fail to set flow_engine to %s mode with flag 0x%x, error %s\n",
mode == RTE_PMD_MLX5_FLOW_ENGINE_MODE_ACTIVE ? "active" : "standby", flag,
- strerror(-ret));
+ rte_strerror(-ret));
else
TESTPMD_LOG(DEBUG, "Set %d ports flow_engine to %s mode with flag 0x%x\n", ret,
mode == RTE_PMD_MLX5_FLOW_ENGINE_MODE_ACTIVE ? "active" : "standby", flag);
@@ -1190,14 +1190,14 @@ mlx5_dev_start(struct rte_eth_dev *dev)
ret = mlx5_dev_configure_rss_reta(dev);
if (ret) {
DRV_LOG(ERR, "port %u reta config failed: %s",
- dev->data->port_id, strerror(rte_errno));
+ dev->data->port_id, rte_strerror(rte_errno));
return -rte_errno;
}
}
ret = mlx5_txpp_start(dev);
if (ret) {
DRV_LOG(ERR, "port %u Tx packet pacing init failed: %s",
- dev->data->port_id, strerror(rte_errno));
+ dev->data->port_id, rte_strerror(rte_errno));
goto error;
}
if (mlx5_devx_obj_ops_en(priv->sh) &&
@@ -1209,7 +1209,7 @@ mlx5_dev_start(struct rte_eth_dev *dev)
ret = mlx5_txq_start(dev);
if (ret) {
DRV_LOG(ERR, "port %u Tx queue allocation failed: %s",
- dev->data->port_id, strerror(rte_errno));
+ dev->data->port_id, rte_strerror(rte_errno));
goto error;
}
if (priv->config.std_delay_drop || priv->config.hp_delay_drop) {
@@ -1233,7 +1233,7 @@ mlx5_dev_start(struct rte_eth_dev *dev)
ret = mlx5_rxq_start(dev);
if (ret) {
DRV_LOG(ERR, "port %u Rx queue allocation failed: %s",
- dev->data->port_id, strerror(rte_errno));
+ dev->data->port_id, rte_strerror(rte_errno));
goto error;
}
/*
@@ -1243,7 +1243,7 @@ mlx5_dev_start(struct rte_eth_dev *dev)
ret = mlx5_hairpin_auto_bind(dev);
if (ret) {
DRV_LOG(ERR, "port %u hairpin auto binding failed: %s",
- dev->data->port_id, strerror(rte_errno));
+ dev->data->port_id, rte_strerror(rte_errno));
goto error;
}
/* Set started flag here for the following steps like control flow. */
@@ -1296,7 +1296,7 @@ mlx5_dev_start(struct rte_eth_dev *dev)
ret = mlx5_flow_start_default(dev);
if (ret) {
DRV_LOG(DEBUG, "port %u failed to start default actions: %s",
- dev->data->port_id, strerror(rte_errno));
+ dev->data->port_id, rte_strerror(rte_errno));
goto error;
}
if (mlx5_dev_ctx_shared_mempool_subscribe(dev) != 0) {
@@ -118,7 +118,7 @@ mlx5_vlan_strip_queue_set(struct rte_eth_dev *dev, uint16_t queue, int on)
ret = priv->obj_ops.rxq_obj_modify_vlan_strip(rxq, on);
if (ret) {
DRV_LOG(ERR, "Port %u failed to modify object stripping mode:"
- " %s", dev->data->port_id, strerror(rte_errno));
+ " %s", dev->data->port_id, rte_strerror(rte_errno));
return;
}
/* Update related bits in RX queue. */
@@ -212,7 +212,7 @@ mlx5_os_stats_init(struct rte_eth_dev *dev)
ret = mlx5_os_read_dev_stat(priv, "out_of_buffer", &stats_ctrl->imissed_base);
if (ret)
DRV_LOG(ERR, "port %u cannot read device counters: %s",
- dev->data->port_id, strerror(rte_errno));
+ dev->data->port_id, rte_strerror(rte_errno));
stats_ctrl->imissed = 0;
}
@@ -379,7 +379,7 @@ mlx5_dev_spawn(struct rte_device *dpdk_dev,
err = mlx5_glue->devx_init_showdown_event(sh->cdev->ctx);
if (err) {
DRV_LOG(ERR, "failed to init showdown event: %s",
- strerror(errno));
+ rte_strerror(errno));
goto error;
}
/* Allocate private eth device data. */
@@ -427,7 +427,7 @@ mlx5_dev_spawn(struct rte_device *dpdk_dev,
if (err) {
err = rte_errno;
DRV_LOG(ERR, "unable to allocate switch domain: %s",
- strerror(rte_errno));
+ rte_strerror(rte_errno));
goto error;
}
own_domain_id = 1;
@@ -437,7 +437,7 @@ mlx5_dev_spawn(struct rte_device *dpdk_dev,
if (err) {
err = rte_errno;
DRV_LOG(ERR, "Failed to process port configure: %s",
- strerror(rte_errno));
+ rte_strerror(rte_errno));
goto error;
}
eth_dev = rte_eth_dev_allocate(name);
@@ -480,7 +480,7 @@ mlx5_dev_spawn(struct rte_device *dpdk_dev,
DRV_LOG(ERR,
"port %u cannot get MAC address, is mlx5_en"
" loaded? (errno: %s).",
- eth_dev->data->port_id, strerror(rte_errno));
+ eth_dev->data->port_id, rte_strerror(rte_errno));
err = ENODEV;
goto error;
}
@@ -730,7 +730,7 @@ mlx5_os_mac_addr_add(struct rte_eth_dev *dev, struct rte_ether_addr *mac,
DRV_LOG(ERR,
"port %u cannot get MAC address, is mlx5_en"
" loaded? (errno: %s)",
- dev->data->port_id, strerror(rte_errno));
+ dev->data->port_id, rte_strerror(rte_errno));
return rte_errno;
}
if (!rte_is_same_ether_addr(&lmac, mac)) {
@@ -849,7 +849,7 @@ mlx5_os_net_probe(struct mlx5_common_device *cdev,
ret = mlx5_init_once();
if (ret) {
DRV_LOG(ERR, "unable to init PMD global data: %s",
- strerror(rte_errno));
+ rte_strerror(rte_errno));
return -rte_errno;
}
spawn.eth_dev = mlx5_dev_spawn(cdev->dev, &spawn, mkvlist);