@@ -67,6 +67,9 @@
#include "cmdline_mtr.h"
#include "cmdline_tm.h"
#include "bpf_cmd.h"
+#ifdef RTE_NET_MLX5
+#include "mlx5_testpmd.h"
+#endif
static struct cmdline *testpmd_cl;
@@ -17803,6 +17806,73 @@ cmdline_parse_inst_t cmd_show_port_flow_transfer_proxy = {
}
};
+/* *** SET LIMIT WARTER MARK FOR A RXQ OF A PORT *** */
+struct cmd_rxq_lwm_result {
+ cmdline_fixed_string_t set;
+ cmdline_fixed_string_t port;
+ uint16_t port_num;
+ cmdline_fixed_string_t rxq;
+ uint16_t rxq_num;
+ cmdline_fixed_string_t lwm;
+ uint16_t lwm_num;
+};
+
+static void cmd_rxq_lwm_parsed(void *parsed_result,
+ __rte_unused struct cmdline *cl,
+ __rte_unused void *data)
+{
+ struct cmd_rxq_lwm_result *res = parsed_result;
+ int ret = 0;
+
+ if ((strcmp(res->set, "set") == 0) && (strcmp(res->port, "port") == 0)
+ && (strcmp(res->rxq, "rxq") == 0)
+ && (strcmp(res->lwm, "lwm") == 0))
+ ret = set_rxq_lwm(res->port_num, res->rxq_num,
+ res->lwm_num);
+ if (ret < 0)
+ printf("rxq_lwm_cmd error: (%s)\n", strerror(-ret));
+
+}
+
+cmdline_parse_token_string_t cmd_rxq_lwm_set =
+ TOKEN_STRING_INITIALIZER(struct cmd_rxq_lwm_result,
+ set, "set");
+cmdline_parse_token_string_t cmd_rxq_lwm_port =
+ TOKEN_STRING_INITIALIZER(struct cmd_rxq_lwm_result,
+ port, "port");
+cmdline_parse_token_num_t cmd_rxq_lwm_portnum =
+ TOKEN_NUM_INITIALIZER(struct cmd_rxq_lwm_result,
+ port_num, RTE_UINT16);
+cmdline_parse_token_string_t cmd_rxq_lwm_rxq =
+ TOKEN_STRING_INITIALIZER(struct cmd_rxq_lwm_result,
+ rxq, "rxq");
+cmdline_parse_token_num_t cmd_rxq_lwm_rxqnum =
+ TOKEN_NUM_INITIALIZER(struct cmd_rxq_lwm_result,
+ rxq_num, RTE_UINT8);
+cmdline_parse_token_string_t cmd_rxq_lwm_lwm =
+ TOKEN_STRING_INITIALIZER(struct cmd_rxq_lwm_result,
+ lwm, "lwm");
+cmdline_parse_token_num_t cmd_rxq_lwm_lwmnum =
+ TOKEN_NUM_INITIALIZER(struct cmd_rxq_lwm_result,
+ lwm_num, RTE_UINT16);
+
+cmdline_parse_inst_t cmd_rxq_lwm = {
+ .f = cmd_rxq_lwm_parsed,
+ .data = (void *)0,
+ .help_str = "set port <port_id> rxq <rxq_id> lwm <lwm_num>"
+ "Set lwm for rxq on port_id",
+ .tokens = {
+ (void *)&cmd_rxq_lwm_set,
+ (void *)&cmd_rxq_lwm_port,
+ (void *)&cmd_rxq_lwm_portnum,
+ (void *)&cmd_rxq_lwm_rxq,
+ (void *)&cmd_rxq_lwm_rxqnum,
+ (void *)&cmd_rxq_lwm_lwm,
+ (void *)&cmd_rxq_lwm_lwmnum,
+ NULL,
+ },
+};
+
/* ******************************************************************************** */
/* list of instructions */
@@ -18089,6 +18159,10 @@ cmdline_parse_ctx_t main_ctx[] = {
(cmdline_parse_inst_t *)&cmd_show_capability,
(cmdline_parse_inst_t *)&cmd_set_flex_is_pattern,
(cmdline_parse_inst_t *)&cmd_set_flex_spec_pattern,
+ (cmdline_parse_inst_t *)&cmd_rxq_lwm,
+#ifdef RTE_NET_MLX5
+ (cmdline_parse_inst_t *)&mlx5_test_cmd_port_host_shaper,
+#endif
NULL,
};
@@ -6342,3 +6342,26 @@ show_mcast_macs(portid_t port_id)
printf(" %s\n", buf);
}
}
+
+int
+set_rxq_lwm(portid_t port_id, uint16_t queue_idx, uint16_t lwm)
+{
+ struct rte_eth_link link;
+ int ret;
+
+ if (port_id_is_invalid(port_id, ENABLED_WARN))
+ return -EINVAL;
+ ret = eth_link_get_nowait_print_err(port_id, &link);
+ if (ret < 0)
+ return -EINVAL;
+ if (lwm > 99)
+ return -EINVAL;
+ ret = rte_eth_rx_lwm_set(port_id, queue_idx, lwm);
+
+ if (ret)
+ return ret;
+ /* Save the input lwm. */
+ ports[port_id].rx_conf[queue_idx].lwm = lwm;
+ return 0;
+}
+
@@ -73,3 +73,7 @@ endif
if dpdk_conf.has('RTE_NET_DPAA')
deps += ['bus_dpaa', 'mempool_dpaa', 'net_dpaa']
endif
+if dpdk_conf.has('RTE_NET_MLX5')
+ deps += 'net_mlx5'
+ sources += files('../../drivers/net/mlx5/mlx5_testpmd.c')
+endif
@@ -66,6 +66,9 @@
#ifdef RTE_EXEC_ENV_WINDOWS
#include <process.h>
#endif
+#ifdef RTE_NET_MLX5
+#include "mlx5_testpmd.h"
+#endif
#include "testpmd.h"
@@ -417,6 +420,7 @@ static const char * const eth_event_desc[] = {
[RTE_ETH_EVENT_NEW] = "device probed",
[RTE_ETH_EVENT_DESTROY] = "device released",
[RTE_ETH_EVENT_FLOW_AGED] = "flow aged",
+ [RTE_ETH_EVENT_RX_LWM] = "rxq limit reached",
[RTE_ETH_EVENT_MAX] = NULL,
};
@@ -3551,6 +3555,10 @@ static int
eth_event_callback(portid_t port_id, enum rte_eth_event_type type, void *param,
void *ret_param)
{
+ struct rte_eth_dev_info dev_info;
+ uint16_t rxq_id;
+ uint8_t lwm;
+ int ret;
RTE_SET_USED(param);
RTE_SET_USED(ret_param);
@@ -3582,6 +3590,22 @@ eth_event_callback(portid_t port_id, enum rte_eth_event_type type, void *param,
ports[port_id].port_status = RTE_PORT_CLOSED;
printf("Port %u is closed\n", port_id);
break;
+ case RTE_ETH_EVENT_RX_LWM:
+ ret = rte_eth_dev_info_get(port_id, &dev_info);
+ if (ret != 0)
+ break;
+ /* LWM query API rewinds rxq_id, no need to check max rxq num. */
+ for (rxq_id = 0; ; rxq_id++) {
+ ret = rte_eth_rx_lwm_query(port_id, &rxq_id, &lwm);
+ if (ret <= 0)
+ break;
+ printf("Received LWM event, port:%d rxq_id:%d\n",
+ port_id, rxq_id);
+#ifdef RTE_NET_MLX5
+ mlx5_test_lwm_event_handler(port_id, rxq_id);
+#endif
+ }
+ break;
default:
break;
}
@@ -1163,6 +1163,7 @@ int update_jumbo_frame_offload(portid_t portid);
void flex_item_create(portid_t port_id, uint16_t flex_id, const char *filename);
void flex_item_destroy(portid_t port_id, uint16_t flex_id);
void port_flex_item_flush(portid_t port_id);
+int set_rxq_lwm(portid_t port_id, uint16_t queue_idx, uint16_t lwm);
extern int flow_parse(const char *src, void *result, unsigned int size,
struct rte_flow_attr **attr,
@@ -1718,3 +1718,49 @@ on the host port by the firmware upon receiving the LMW event, which allows
throttling host traffic on LWM events at minimum latency, preventing excess
drops in the Rx queue.
+How to use LWM and Host Shaper
+------------------------------
+
+There are sample command lines to configure LWM in testpmd.
+Testpmd also contains sample logic to handle LWM event.
+The typical workflow is: testpmd configure LWM for Rx queues, enable
+lwm_triggered in host shaper and register a callback, when traffic from host is
+too high and Rx queue fullness is above LWM, PMD receives an event and
+firmware configures a 100Mbps shaper on host port automatically, then PMD call
+the callback registered previously, which will delay a while to let Rx queue
+empty, then disable host shaper.
+
+Let's assume we have a simple Blue Field 2 setup: port 0 is uplink, port 1
+is VF representor. Each port has 2 Rx queues.
+In order to control traffic from host to ARM, we can enable LWM in testpmd by:
+
+.. code-block:: console
+
+ testpmd> mlx5 set port 1 host_shaper lwm_triggered 1 rate 0
+ testpmd> set port 1 rxq 0 lwm 70
+ testpmd> set port 1 rxq 1 lwm 70
+
+The first command disables current host shaper, and enables LWM triggered mode.
+The left commands configure LWM to 70% of Rx queue size for both Rx queues,
+When traffic from host is too high, you can see testpmd console prints log
+about LWM event receiving, then host shaper is disabled.
+The traffic rate from host is controlled and less drop happens in Rx queues.
+
+When disable LWM and lwm_triggered, we can invoke below commands in testpmd:
+
+.. code-block:: console
+
+ testpmd> mlx5 set port 1 host_shaper lwm_triggered 0 rate 0
+ testpmd> set port 1 rxq 0 lwm 0
+ testpmd> set port 1 rxq 1 lwm 0
+
+It's recommended an application disables LWM and lwm_triggered before exit,
+if it enables them before.
+
+We can also configure the shaper with a value, the rate unit is 100Mbps, below
+command sets current shaper to 5Gbps and disables lwm_triggered.
+
+.. code-block:: console
+
+ testpmd> mlx5 set port 1 host_shaper lwm_triggered 0 rate 50
+
new file mode 100644
@@ -0,0 +1,184 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright 2021 6WIND S.A.
+ * Copyright 2021 Mellanox Technologies, Ltd
+ */
+
+#include <stdint.h>
+#include <string.h>
+#include <stdlib.h>
+
+#include <rte_prefetch.h>
+#include <rte_common.h>
+#include <rte_branch_prediction.h>
+#include <rte_ether.h>
+#include <rte_alarm.h>
+#include <rte_pmd_mlx5.h>
+#include <rte_ethdev.h>
+#include "mlx5_testpmd.h"
+
+static uint8_t host_shaper_lwm_triggered[RTE_MAX_ETHPORTS];
+#define SHAPER_DISABLE_DELAY_US 100000 /* 100ms */
+
+/**
+ * Disable the host shaper and re-arm LWM event.
+ *
+ * @param[in] args
+ * uint32_t integer combining port_id and rxq_id.
+ */
+static void
+mlx5_test_host_shaper_disable(void *args)
+{
+ uint32_t port_rxq_id = (uint32_t)(uintptr_t)args;
+ uint16_t port_id = port_rxq_id & 0xffff;
+ uint16_t qid = (port_rxq_id >> 16) & 0xffff;
+ struct rte_eth_rxq_info qinfo;
+
+ printf("%s disable shaper\n", __func__);
+ if (rte_eth_rx_queue_info_get(port_id, qid, &qinfo)) {
+ printf("rx_queue_info_get returns error\n");
+ return;
+ }
+ /* Rearm the LWM event. */
+ if (rte_eth_rx_lwm_set(port_id, qid, qinfo.conf.lwm)) {
+ printf("config lwm returns error\n");
+ return;
+ }
+ /* Only disable the shaper when lwm_triggered is set. */
+ if (host_shaper_lwm_triggered[port_id] &&
+ rte_pmd_mlx5_host_shaper_config(port_id, 0, 0))
+ printf("%s disable shaper returns error\n", __func__);
+}
+
+void
+mlx5_test_lwm_event_handler(uint16_t port_id, uint16_t rxq_id)
+{
+ uint32_t port_rxq_id = port_id | (rxq_id << 16);
+
+ rte_eal_alarm_set(SHAPER_DISABLE_DELAY_US,
+ mlx5_test_host_shaper_disable,
+ (void *)(uintptr_t)port_rxq_id);
+ printf("%s port_id:%u rxq_id:%u\n", __func__, port_id, rxq_id);
+}
+
+/**
+ * Configure host shaper's lwm_triggered and current rate.
+ *
+ * @param[in] lwm_triggered
+ * Disable/enable lwm_triggered.
+ * @param[in] rate
+ * Configure current host shaper rate.
+ * @return
+ * On success, returns 0.
+ * On failure, returns < 0.
+ */
+static int
+mlx5_test_set_port_host_shaper(uint16_t port_id, uint16_t lwm_triggered, uint8_t rate)
+{
+ struct rte_eth_link link;
+ bool port_id_valid = false;
+ uint16_t pid;
+ int ret;
+
+ RTE_ETH_FOREACH_DEV(pid)
+ if (port_id == pid) {
+ port_id_valid = true;
+ break;
+ }
+ if (!port_id_valid)
+ return -EINVAL;
+ ret = rte_eth_link_get_nowait(port_id, &link);
+ if (ret < 0)
+ return ret;
+ host_shaper_lwm_triggered[port_id] = lwm_triggered ? 1 : 0;
+ if (!lwm_triggered) {
+ ret = rte_pmd_mlx5_host_shaper_config(port_id, 0,
+ RTE_BIT32(MLX5_HOST_SHAPER_FLAG_LWM_TRIGGERED));
+ } else {
+ ret = rte_pmd_mlx5_host_shaper_config(port_id, 1,
+ RTE_BIT32(MLX5_HOST_SHAPER_FLAG_LWM_TRIGGERED));
+ }
+ if (ret)
+ return ret;
+ ret = rte_pmd_mlx5_host_shaper_config(port_id, rate, 0);
+ if (ret)
+ return ret;
+ return 0;
+}
+
+/* *** SET HOST_SHAPER FOR A PORT *** */
+struct cmd_port_host_shaper_result {
+ cmdline_fixed_string_t mlx5;
+ cmdline_fixed_string_t set;
+ cmdline_fixed_string_t port;
+ uint16_t port_num;
+ cmdline_fixed_string_t host_shaper;
+ cmdline_fixed_string_t lwm_triggered;
+ uint16_t fr;
+ cmdline_fixed_string_t rate;
+ uint8_t rate_num;
+};
+
+static void cmd_port_host_shaper_parsed(void *parsed_result,
+ __rte_unused struct cmdline *cl,
+ __rte_unused void *data)
+{
+ struct cmd_port_host_shaper_result *res = parsed_result;
+ int ret = 0;
+
+ if ((strcmp(res->mlx5, "mlx5") == 0) &&
+ (strcmp(res->set, "set") == 0) &&
+ (strcmp(res->port, "port") == 0) &&
+ (strcmp(res->host_shaper, "host_shaper") == 0) &&
+ (strcmp(res->lwm_triggered, "lwm_triggered") == 0) &&
+ (strcmp(res->rate, "rate") == 0))
+ ret = mlx5_test_set_port_host_shaper(res->port_num, res->fr,
+ res->rate_num);
+ if (ret < 0)
+ printf("cmd_port_host_shaper error: (%s)\n", strerror(-ret));
+}
+
+cmdline_parse_token_string_t cmd_port_host_shaper_mlx5 =
+ TOKEN_STRING_INITIALIZER(struct cmd_port_host_shaper_result,
+ mlx5, "mlx5");
+cmdline_parse_token_string_t cmd_port_host_shaper_set =
+ TOKEN_STRING_INITIALIZER(struct cmd_port_host_shaper_result,
+ set, "set");
+cmdline_parse_token_string_t cmd_port_host_shaper_port =
+ TOKEN_STRING_INITIALIZER(struct cmd_port_host_shaper_result,
+ port, "port");
+cmdline_parse_token_num_t cmd_port_host_shaper_portnum =
+ TOKEN_NUM_INITIALIZER(struct cmd_port_host_shaper_result,
+ port_num, RTE_UINT16);
+cmdline_parse_token_string_t cmd_port_host_shaper_host_shaper =
+ TOKEN_STRING_INITIALIZER(struct cmd_port_host_shaper_result,
+ host_shaper, "host_shaper");
+cmdline_parse_token_string_t cmd_port_host_shaper_lwm_triggered =
+ TOKEN_STRING_INITIALIZER(struct cmd_port_host_shaper_result,
+ lwm_triggered, "lwm_triggered");
+cmdline_parse_token_num_t cmd_port_host_shaper_fr =
+ TOKEN_NUM_INITIALIZER(struct cmd_port_host_shaper_result,
+ fr, RTE_UINT16);
+cmdline_parse_token_string_t cmd_port_host_shaper_rate =
+ TOKEN_STRING_INITIALIZER(struct cmd_port_host_shaper_result,
+ rate, "rate");
+cmdline_parse_token_num_t cmd_port_host_shaper_rate_num =
+ TOKEN_NUM_INITIALIZER(struct cmd_port_host_shaper_result,
+ rate_num, RTE_UINT8);
+cmdline_parse_inst_t mlx5_test_cmd_port_host_shaper = {
+ .f = cmd_port_host_shaper_parsed,
+ .data = (void *)0,
+ .help_str = "mlx5 set port <port_id> host_shaper lwm_triggered <0|1> "
+ "rate <rate_num>: Set HOST_SHAPER lwm_triggered and rate with port_id",
+ .tokens = {
+ (void *)&cmd_port_host_shaper_mlx5,
+ (void *)&cmd_port_host_shaper_set,
+ (void *)&cmd_port_host_shaper_port,
+ (void *)&cmd_port_host_shaper_portnum,
+ (void *)&cmd_port_host_shaper_host_shaper,
+ (void *)&cmd_port_host_shaper_lwm_triggered,
+ (void *)&cmd_port_host_shaper_fr,
+ (void *)&cmd_port_host_shaper_rate,
+ (void *)&cmd_port_host_shaper_rate_num,
+ NULL,
+ }
+};
new file mode 100644
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright 2021 6WIND S.A.
+ * Copyright 2021 Mellanox Technologies, Ltd
+ */
+
+#ifndef RTE_PMD_MLX5_TEST_H_
+#define RTE_PMD_MLX5_TEST_H_
+
+#include <cmdline_parse.h>
+#include <cmdline_parse_num.h>
+#include <cmdline_parse_string.h>
+
+/**
+ * RTE_ETH_EVENT_RX_LWM handler sample code.
+ * It's called in testpmd, the work flow here is delay a while until
+ * RX queueu is empty, then disable host shaper.
+ *
+ * @param[in] port_id
+ * Port identifier.
+ * @param[in] rxq_id
+ * Rx queue identifier.
+ */
+void
+mlx5_test_lwm_event_handler(uint16_t port_id, uint16_t rxq_id);
+
+extern cmdline_parse_inst_t mlx5_test_cmd_port_host_shaper;
+#endif