[v2,3/5] doc: correct name of BlueField-2 in mlx5 guide
Checks
Commit Message
Update "BlueField 2" -> "BlueField-2" in mlx5 docs.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Reviewed-by: Raslan Darawsheh <rasland@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
---
doc/guides/compressdevs/mlx5.rst | 6 +++---
doc/guides/cryptodevs/mlx5.rst | 6 +++---
doc/guides/nics/mlx5.rst | 2 +-
doc/guides/regexdevs/mlx5.rst | 8 ++++----
4 files changed, 11 insertions(+), 11 deletions(-)
@@ -7,7 +7,7 @@ MLX5 compress driver
====================
The MLX5 compress driver library
-(**librte_compress_mlx5**) provides support for **Mellanox BlueField 2**
+(**librte_compress_mlx5**) provides support for **Mellanox BlueField-2**
families of 25/50/100/200 Gb/s adapters.
Design
@@ -21,7 +21,7 @@ These engines are part of the ARM complex of the BlueField chip, and as
such they do not use NIC related resources (e.g. RX/TX bandwidth).
They do share the same PCI and memory bandwidth.
-So, using the BlueField device (starting from BlueField 2), the compress
+So, using the BlueField device (starting from BlueField-2), the compress
class operations can be supported in parallel to the net, vDPA and
RegEx class operations.
@@ -95,7 +95,7 @@ Driver options
Supported NICs
--------------
-* Mellanox\ |reg| BlueField 2 SmartNIC
+* Mellanox\ |reg| BlueField-2 SmartNIC
Prerequisites
-------------
@@ -88,7 +88,7 @@ The mlxreg dedicated tool should be used as follows:
should not be specified.
All the device ports should set it in order to move to operational mode.
- For BlueField 2, the internal ports in the ARM system should also be set.
+ For BlueField-2, the internal ports in the ARM system should also be set.
- Query CRYPTO_OPERATIONAL register to make sure the device is in Operational
mode.
@@ -142,7 +142,7 @@ Supported NICs
--------------
* Mellanox\ |reg| ConnectX\ |reg|-6 200G MCX654106A-HCAT (2x200G)
-* Mellanox\ |reg| BlueField 2 SmartNIC
+* Mellanox\ |reg| BlueField-2 SmartNIC
* Mellanox\ |reg| ConnectX\ |reg|-6 Dx
@@ -162,7 +162,7 @@ FW Prerequisites
~~~~~~~~~~~~~~~~
- xx.31.0328 for ConnectX-6.
-- xx.32.0108 for ConnectX-6 Dx and BlueField 2.
+- xx.32.0108 for ConnectX-6 Dx and BlueField-2.
Linux Prerequisites
~~~~~~~~~~~~~~~~~~~
@@ -253,7 +253,7 @@ Limitations
- Flex item:
- - Hardware support: BlueField 2.
+ - Hardware support: BlueField-2.
- Flex item is supported on PF only.
- Hardware limits ``header_length_mask_width`` up to 6 bits.
- Firmware supports 8 global sample fields.
@@ -7,7 +7,7 @@ MLX5 RegEx driver
=================
The MLX5 RegEx (Regular Expression) driver library
-(**librte_regex_mlx5**) provides support for **Mellanox BlueField 2**
+(**librte_regex_mlx5**) provides support for **Mellanox BlueField-2**
families of 25/50/100/200 Gb/s adapters.
Design
@@ -43,13 +43,13 @@ Features
Supported NICs
--------------
-* Mellanox\ |reg| BlueField 2 SmartNIC
+* Mellanox\ |reg| BlueField-2 SmartNIC
Prerequisites
-------------
-- BlueField 2 running Mellanox supported kernel.
-- Enable the RegEx capabilities using system call from the BlueField 2.
+- BlueField-2 running Mellanox supported kernel.
+- Enable the RegEx capabilities using system call from the BlueField-2.
- Official support is not yet released.
Limitations