diff mbox series

[v2,1/5] net/enetfec: introduce NXP ENETFEC driver

Message ID 20210902175955.9202-2-apeksha.gupta@nxp.com (mailing list archive)
State Superseded, archived
Delegated to: Ferruh Yigit
Headers show
Series drivers/net: add NXP ENETFEC driver | expand

Checks

Context Check Description
ci/checkpatch warning coding style issues

Commit Message

Apeksha Gupta Sept. 2, 2021, 5:59 p.m. UTC
ENETFEC (Fast Ethernet Controller) is a network poll mode driver
for NXP SoC i.MX 8M Mini.

This patch adds skeleton for enetfec driver with probe function.

Signed-off-by: Sachin Saxena <sachin.saxena@nxp.com>
Signed-off-by: Apeksha Gupta <apeksha.gupta@nxp.com>
---
 doc/guides/nics/enetfec.rst          | 121 ++++++++++++++++++++
 doc/guides/nics/features/enetfec.ini |   8 ++
 doc/guides/nics/index.rst            |   1 +
 drivers/net/enetfec/enet_ethdev.c    |  95 ++++++++++++++++
 drivers/net/enetfec/enet_ethdev.h    | 160 +++++++++++++++++++++++++++
 drivers/net/enetfec/enet_pmd_logs.h  |  31 ++++++
 drivers/net/enetfec/meson.build      |  15 +++
 drivers/net/enetfec/version.map      |   3 +
 drivers/net/meson.build              |   1 +
 9 files changed, 435 insertions(+)
 create mode 100644 doc/guides/nics/enetfec.rst
 create mode 100644 doc/guides/nics/features/enetfec.ini
 create mode 100644 drivers/net/enetfec/enet_ethdev.c
 create mode 100644 drivers/net/enetfec/enet_ethdev.h
 create mode 100644 drivers/net/enetfec/enet_pmd_logs.h
 create mode 100644 drivers/net/enetfec/meson.build
 create mode 100644 drivers/net/enetfec/version.map

Comments

David Marchand Sept. 3, 2021, 7:14 a.m. UTC | #1
On Thu, Sep 2, 2021 at 8:01 PM Apeksha Gupta <apeksha.gupta@nxp.com> wrote:
>
> ENETFEC (Fast Ethernet Controller) is a network poll mode driver
> for NXP SoC i.MX 8M Mini.
>
> This patch adds skeleton for enetfec driver with probe function.
>
> Signed-off-by: Sachin Saxena <sachin.saxena@nxp.com>
> Signed-off-by: Apeksha Gupta <apeksha.gupta@nxp.com>
> ---
>  doc/guides/nics/enetfec.rst          | 121 ++++++++++++++++++++
>  doc/guides/nics/features/enetfec.ini |   8 ++
>  doc/guides/nics/index.rst            |   1 +
>  drivers/net/enetfec/enet_ethdev.c    |  95 ++++++++++++++++
>  drivers/net/enetfec/enet_ethdev.h    | 160 +++++++++++++++++++++++++++
>  drivers/net/enetfec/enet_pmd_logs.h  |  31 ++++++
>  drivers/net/enetfec/meson.build      |  15 +++
>  drivers/net/enetfec/version.map      |   3 +
>  drivers/net/meson.build              |   1 +
>  9 files changed, 435 insertions(+)
>  create mode 100644 doc/guides/nics/enetfec.rst
>  create mode 100644 doc/guides/nics/features/enetfec.ini
>  create mode 100644 drivers/net/enetfec/enet_ethdev.c
>  create mode 100644 drivers/net/enetfec/enet_ethdev.h
>  create mode 100644 drivers/net/enetfec/enet_pmd_logs.h
>  create mode 100644 drivers/net/enetfec/meson.build
>  create mode 100644 drivers/net/enetfec/version.map

Please update MAINTAINERS and release notes in this first patch.

>
> diff --git a/doc/guides/nics/enetfec.rst b/doc/guides/nics/enetfec.rst
> new file mode 100644
> index 0000000000..f151bb26c4
> --- /dev/null
> +++ b/doc/guides/nics/enetfec.rst
> @@ -0,0 +1,121 @@
> +.. SPDX-License-Identifier: BSD-3-Clause
> +   Copyright 2021 NXP
> +
> +ENETFEC Poll Mode Driver
> +========================
> +
> +The ENETFEC NIC PMD (**librte_net_enetfec**) provides poll mode driver
> +support for the inbuilt NIC found in the ** NXP i.MX 8M Mini** SoC.
> +
> +More information can be found at NXP Official Website
> +<https://www.nxp.com/products/processors-and-microcontrollers/arm-processors/i-mx-applications-processors/i-mx-8-processors/i-mx-8m-mini-arm-cortex-a53-cortex-m4-audio-voice-video:i.MX8MMINI>
> +
> +ENETFEC
> +-------
> +
> +This section provides an overview of the NXP ENETFEC and how it is
> +integrated into the DPDK.
> +
> +Contents summary
> +
> +- ENETFEC overview
> +- ENETFEC features
> +- Supported ENETFEC SoCs
> +- Prerequisites
> +- Driver compilation and testing
> +- Limitations
> +
> +ENETFEC Overview
> +~~~~~~~~~~~~~~~~
> +The i.MX 8M Mini Media Applications Processor is built to achieve both high
> +performance and low power consumption. ENETFEC is a hardware programmable
> +packet forwarding engine to provide high performance Ethernet interface.
> +The diagram below shows a system level overview of ENETFEC:
> +
> +   ====================================================+===============
> +   US   +-----------------------------------------+    | Kernel Space
> +        |                                         |    |
> +        |              ENETFEC Driver             |    |
> +        +-----------------------------------------+    |
> +                          ^   |                        |
> +   ENETFEC            RXQ |   | TXQ                   |
> +   PMD                    |   |                       |
> +                          |   v                       |   +----------+

Misalignment of the right part.


> +                     +-------------+                   |   | fec-uio  |

What is fec-uio?
I can't find it in upstream linux kernel.


> +                     | net_enetfec |                   |   +----------+
> +                     +-------------+                   |
> +                          ^   |                        |
> +                      TXQ |   | RXQ                    |
> +                          |   |                        |
> +                          |   v                        |
> +    ===================================================+===============
> +         +----------------------------------------+
> +         |                                        |        HW
> +         |  i.MX 8M MINI EVK                      |
> +         |               +-----+                  |
> +         |               | MAC |                  |
> +         +---------------+-----+------------------+
> +                        | PHY |
> +                        +-----+

Misalignment.


> +
> +ENETFEC Ethernet driver is traditional DPDK PMD driver running in the userspace.
> +The MAC and PHY are the hardware blocks. 'fec-uio' is the UIO driver, ENETFEC PMD
> +uses UIO interface to interact with kernel for PHY initialisation and for mapping
> +the allocated memory of register & BD in kernel with DPDK which gives access to
> +non-cacheable memory for BD. net_enetfec is logical Ethernet interface, created by
> +ENETFEC driver.
> +
> +- ENETFEC driver registers the device in virtual device driver.
> +- RTE framework scans and will invoke the probe function of ENETFEC driver.
> +- The probe function will set the basic device registers and also setups BD rings.
> +- On packet Rx the respective BD Ring status bit is set which is then used for
> +  packet processing.
> +- Then Tx is done first followed by Rx via logical interfaces.
> +
> +ENETFEC Features
> +~~~~~~~~~~~~~~~~~
> +
> +- ARMv8
> +
> +Supported ENETFEC SoCs
> +~~~~~~~~~~~~~~~~~~~~~~
> +
> +- i.MX 8M Mini
> +
> +Prerequisites
> +~~~~~~~~~~~~~
> +
> +There are three main pre-requisites for executing ENETFEC PMD on a i.MX 8M Mini
> +compatible board:
> +
> +1. **ARM 64 Tool Chain**
> +
> +   For example, the `*aarch64* Linaro Toolchain <https://releases.linaro.org/components/toolchain/binaries/7.4-2019.02/aarch64-linux-gnu/gcc-linaro-7.4.1-2019.02-x86_64_aarch64-linux-gnu.tar.xz>`_.
> +
> +2. **Linux Kernel**
> +
> +  It can be obtained from `NXP's Github hosting <https://source.codeaurora.org/external/qoriq/qoriq-components/linux>`_.
> +
> +3. **Rootfile system**
> +
> +   Any *aarch64* supporting filesystem can be used. For example,
> +   Ubuntu 18.04 LTS (Bionic) or 20.04 LTS(Focal) userland which can be obtained
> +   from `here <http://cdimage.ubuntu.com/ubuntu-base/releases/18.04/release/ubuntu-base-18.04.1-base-arm64.tar.gz>`_.
> +
> +4. The Ethernet device will be registered as virtual device, so ENETFEC has dependency on
> +   **rte_bus_vdev** library and it is mandatory to use `--vdev` with value `net_enetfec` to
> +   run DPDK application.
> +
> +Driver compilation and testing
> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +
> +Follow instructions available in the document
> +:ref:`compiling and testing a PMD for a NIC <pmd_build_and_test>`
> +to launch **testpmd**

dpdk-testpmd.


> +
> +Limitations
> +~~~~~~~~~~~
> +
> +- Multi queue is not supported.
> +- Link status is down always.
> +- Single Ethernet interface.
> diff --git a/doc/guides/nics/features/enetfec.ini b/doc/guides/nics/features/enetfec.ini
> new file mode 100644
> index 0000000000..5700697981
> --- /dev/null
> +++ b/doc/guides/nics/features/enetfec.ini
> @@ -0,0 +1,8 @@
> +;
> +; Supported features of the 'enetfec' network poll mode driver.
> +;
> +; Refer to default.ini for the full list of available PMD features.
> +;
> +[Features]
> +ARMv8                = Y
> +Usage doc            = Y
> diff --git a/doc/guides/nics/index.rst b/doc/guides/nics/index.rst
> index 784d5d39f6..777fdab4a0 100644
> --- a/doc/guides/nics/index.rst
> +++ b/doc/guides/nics/index.rst
> @@ -26,6 +26,7 @@ Network Interface Controller Drivers
>      e1000em
>      ena
>      enetc
> +    enetfec
>      enic
>      fm10k
>      hinic
> diff --git a/drivers/net/enetfec/enet_ethdev.c b/drivers/net/enetfec/enet_ethdev.c
> new file mode 100644
> index 0000000000..88774788cf
> --- /dev/null
> +++ b/drivers/net/enetfec/enet_ethdev.c
> @@ -0,0 +1,95 @@
> +/* SPDX-License-Identifier: BSD-3-Clause
> + * Copyright 2020-2021 NXP
> + */
> +
> +#include <stdio.h>
> +#include <fcntl.h>
> +#include <stdlib.h>
> +#include <unistd.h>
> +#include <errno.h>
> +#include <rte_kvargs.h>
> +#include <ethdev_vdev.h>
> +#include <rte_bus_vdev.h>
> +#include <rte_dev.h>
> +#include <rte_ether.h>
> +#include "enet_ethdev.h"
> +#include "enet_pmd_logs.h"
> +
> +#define ENETFEC_NAME_PMD                net_enetfec
> +#define ENETFEC_VDEV_GEM_ID_ARG         "intf"
> +#define ENETFEC_CDEV_INVALID_FD         -1
> +
> +int enetfec_logtype_pmd;

If using RTE_LOG_REGISTER* macros (see below), you don't need this definition.


> +
> +static int
> +enetfec_eth_init(struct rte_eth_dev *dev)
> +{
> +       rte_eth_dev_probing_finish(dev);
> +       return 0;
> +}
> +
> +static int
> +pmd_enetfec_probe(struct rte_vdev_device *vdev)
> +{
> +       struct rte_eth_dev *dev = NULL;
> +       struct enetfec_private *fep;
> +       const char *name;
> +       int rc;
> +
> +       name = rte_vdev_device_name(vdev);
> +       if (name == NULL)
> +               return -EINVAL;
> +       ENETFEC_PMD_LOG(INFO, "Initializing pmd_fec for %s", name);
> +
> +       dev = rte_eth_vdev_allocate(vdev, sizeof(*fep));
> +       if (dev == NULL)
> +               return -ENOMEM;
> +
> +       /* setup board info structure */
> +       fep = dev->data->dev_private;
> +       fep->dev = dev;
> +       rc = enetfec_eth_init(dev);
> +       if (rc)
> +               goto failed_init;
> +
> +       return 0;
> +
> +failed_init:
> +       ENETFEC_PMD_ERR("Failed to init");
> +       return rc;
> +}
> +
> +static int
> +pmd_enetfec_remove(struct rte_vdev_device *vdev)
> +{
> +       struct rte_eth_dev *eth_dev = NULL;
> +       int ret;
> +
> +       /* find the ethdev entry */
> +       eth_dev = rte_eth_dev_allocated(rte_vdev_device_name(vdev));
> +       if (eth_dev == NULL)
> +               return -ENODEV;
> +
> +       ret = rte_eth_dev_release_port(eth_dev);
> +       if (ret != 0)
> +               return -EINVAL;
> +
> +       ENETFEC_PMD_INFO("Closing sw device");
> +       return 0;
> +}
> +
> +static struct rte_vdev_driver pmd_enetfec_drv = {
> +       .probe = pmd_enetfec_probe,
> +       .remove = pmd_enetfec_remove,
> +};
> +
> +RTE_PMD_REGISTER_VDEV(ENETFEC_NAME_PMD, pmd_enetfec_drv);
> +RTE_PMD_REGISTER_PARAM_STRING(ENETFEC_NAME_PMD, ENETFEC_VDEV_GEM_ID_ARG "=<int>");
> +
> +RTE_INIT(enetfec_pmd_init_log)
> +{
> +       int ret;
> +       ret = rte_log_register_type_and_pick_level(ENETFEC_LOGTYPE_PREFIX "driver",
> +                                                  RTE_LOG_NOTICE);
> +       enetfec_logtype_pmd = (ret < 0) ? RTE_LOGTYPE_PMD : ret;
> +}

Please use RTE_LOG_REGISTER_DEFAULT.


> diff --git a/drivers/net/enetfec/enet_ethdev.h b/drivers/net/enetfec/enet_ethdev.h
> new file mode 100644
> index 0000000000..8c61176fb5
> --- /dev/null
> +++ b/drivers/net/enetfec/enet_ethdev.h
> @@ -0,0 +1,160 @@
> +/* SPDX-License-Identifier: BSD-3-Clause
> + * Copyright 2020-2021 NXP
> + */
> +
> +#ifndef __ENETFEC_ETHDEV_H__
> +#define __ENETFEC_ETHDEV_H__
> +
> +#include <compat.h>
> +#include <rte_ethdev.h>
> +
> +/* Common log type name prefix */
> +#define ENETFEC_LOGTYPE_PREFIX "pmd.net.enetfec."
> +
> +/*
> + * ENETFEC with AVB IP can support maximum 3 rx and tx queues.
> + */
> +#define ENETFEC_MAX_Q          3
> +
> +#define BD_LEN                 49152
> +#define ENETFEC_TX_FR_SIZE     2048
> +#define MAX_TX_BD_RING_SIZE    512     /* It should be power of 2 */
> +#define MAX_RX_BD_RING_SIZE    512
> +
> +/* full duplex or half duplex */
> +#define HALF_DUPLEX             0x00
> +#define FULL_DUPLEX             0x01
> +#define UNKNOWN_DUPLEX          0xff
> +
> +#define PKT_MAX_BUF_SIZE        1984
> +#define OPT_FRAME_SIZE         (PKT_MAX_BUF_SIZE << 16)
> +#define ETH_ALEN               RTE_ETHER_ADDR_LEN
> +#define ETH_HLEN               RTE_ETHER_HDR_LEN
> +#define VLAN_HLEN              4
> +
> +struct bufdesc {
> +       uint16_t                bd_datlen;  /* buffer data length */
> +       uint16_t                bd_sc;      /* buffer control & status */
> +       uint32_t                bd_bufaddr; /* buffer address */
> +};
> +
> +struct bufdesc_ex {
> +       struct                  bufdesc desc;
> +       uint32_t                bd_esc;
> +       uint32_t                bd_prot;
> +       uint32_t                bd_bdu;
> +       uint32_t                ts;
> +       uint16_t                res0[4];
> +};
> +
> +struct bufdesc_prop {
> +       int                     que_id;
> +       /* Addresses of Tx and Rx buffers */
> +       struct bufdesc          *base;
> +       struct bufdesc          *last;
> +       struct bufdesc          *cur;
> +       void __iomem            *active_reg_desc;
> +       uint64_t                descr_baseaddr_p;
> +       unsigned short          ring_size;
> +       unsigned char           d_size;
> +       unsigned char           d_size_log2;
> +};
> +
> +struct enetfec_priv_tx_q {
> +       struct bufdesc_prop     bd;
> +       struct rte_mbuf         *tx_mbuf[MAX_TX_BD_RING_SIZE];
> +       struct bufdesc          *dirty_tx;
> +       struct rte_mempool      *pool;
> +       struct enetfec_private  *fep;
> +};
> +
> +struct enetfec_priv_rx_q {
> +       struct bufdesc_prop     bd;
> +       struct rte_mbuf         *rx_mbuf[MAX_RX_BD_RING_SIZE];
> +       struct rte_mempool      *pool;
> +       struct enetfec_private  *fep;
> +};
> +
> +/* Buffer descriptors of FEC are used to track the ring buffers. Buffer
> + * descriptor base is x_bd_base. Currently available buffer are x_cur
> + * and x_cur. where x is rx or tx. Current buffer is tracked by dirty_tx
> + * that is sent by the controller.
> + * The tx_cur and dirty_tx are same in completely full and empty
> + * conditions. Actual condition is determined by empty & ready bits.
> + */
> +struct enetfec_private {
> +       struct rte_eth_dev      *dev;
> +       struct rte_eth_stats    stats;
> +       struct rte_mempool      *pool;
> +       uint16_t                max_rx_queues;
> +       uint16_t                max_tx_queues;
> +       unsigned int            total_tx_ring_size;
> +       unsigned int            total_rx_ring_size;
> +       bool                    bufdesc_ex;
> +       unsigned int            tx_align;
> +       unsigned int            rx_align;
> +       int                     full_duplex;
> +       unsigned int            phy_speed;
> +       u_int32_t               quirks;
> +       int                     flag_csum;
> +       int                     flag_pause;
> +       int                     flag_wol;
> +       bool                    rgmii_txc_delay;
> +       bool                    rgmii_rxc_delay;
> +       int                     link;
> +       void                    *hw_baseaddr_v;
> +       uint64_t                hw_baseaddr_p;
> +       void                    *bd_addr_v;
> +       uint64_t                bd_addr_p;
> +       uint64_t                bd_addr_p_r[ENETFEC_MAX_Q];
> +       uint64_t                bd_addr_p_t[ENETFEC_MAX_Q];
> +       void                    *dma_baseaddr_r[ENETFEC_MAX_Q];
> +       void                    *dma_baseaddr_t[ENETFEC_MAX_Q];
> +       uint64_t                cbus_size;
> +       unsigned int            reg_size;
> +       unsigned int            bd_size;
> +       int                     hw_ts_rx_en;
> +       int                     hw_ts_tx_en;
> +       struct enetfec_priv_rx_q *rx_queues[ENETFEC_MAX_Q];
> +       struct enetfec_priv_tx_q *tx_queues[ENETFEC_MAX_Q];
> +};
> +
> +#define writel(v, p) ({*(volatile unsigned int *)(p) = (v); })
> +#define readl(p) rte_read32(p)
> +
> +static inline struct
> +bufdesc *enet_get_nextdesc(struct bufdesc *bdp, struct bufdesc_prop *bd)
> +{
> +       return (bdp >= bd->last) ? bd->base
> +                       : (struct bufdesc *)(((void *)bdp) + bd->d_size);
> +}
> +
> +static inline struct
> +bufdesc *enet_get_prevdesc(struct bufdesc *bdp, struct bufdesc_prop *bd)
> +{
> +       return (bdp <= bd->base) ? bd->last
> +                       : (struct bufdesc *)(((void *)bdp) - bd->d_size);
> +}
> +
> +static inline int
> +enet_get_bd_index(struct bufdesc *bdp, struct bufdesc_prop *bd)
> +{
> +       return ((const char *)bdp - (const char *)bd->base) >> bd->d_size_log2;
> +}
> +
> +static inline int
> +fls64(unsigned long word)
> +{
> +       return (64 - __builtin_clzl(word)) - 1;
> +}
> +
> +uint16_t enetfec_recv_pkts(void *rxq1, __rte_unused struct rte_mbuf **rx_pkts,
> +               uint16_t nb_pkts);
> +uint16_t enetfec_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
> +               uint16_t nb_pkts);
> +struct bufdesc *enet_get_nextdesc(struct bufdesc *bdp,
> +               struct bufdesc_prop *bd);
> +int enet_new_rxbdp(struct enetfec_private *fep, struct bufdesc *bdp,
> +               struct rte_mbuf *mbuf);
> +
> +#endif /*__ENETFEC_ETHDEV_H__*/
> diff --git a/drivers/net/enetfec/enet_pmd_logs.h b/drivers/net/enetfec/enet_pmd_logs.h
> new file mode 100644
> index 0000000000..e7b3964a0e
> --- /dev/null
> +++ b/drivers/net/enetfec/enet_pmd_logs.h
> @@ -0,0 +1,31 @@
> +/* SPDX-License-Identifier: BSD-3-Clause
> + * Copyright 2020-2021 NXP
> + */
> +
> +#ifndef _ENETFEC_LOGS_H_
> +#define _ENETFEC_LOGS_H_
> +
> +extern int enetfec_logtype_pmd;
> +
> +/* PMD related logs */
> +#define ENETFEC_PMD_LOG(level, fmt, args...) \
> +       rte_log(RTE_LOG_ ## level, enetfec_logtype_pmd, "\nfec_net: %s()" \
> +               fmt "\n", __func__, ##args)
> +
> +#define PMD_INIT_FUNC_TRACE() ENET_PMD_LOG(DEBUG, " >>")
> +
> +#define ENETFEC_PMD_DEBUG(fmt, args...) \
> +       ENETFEC_PMD_LOG(DEBUG, fmt, ## args)
> +#define ENETFEC_PMD_ERR(fmt, args...) \
> +       ENETFEC_PMD_LOG(ERR, fmt, ## args)
> +#define ENETFEC_PMD_INFO(fmt, args...) \
> +       ENETFEC_PMD_LOG(INFO, fmt, ## args)
> +
> +#define ENETFEC_PMD_WARN(fmt, args...) \
> +       ENETFEC_PMD_LOG(WARNING, fmt, ## args)
> +
> +/* DP Logs, toggled out at compile time if level lower than current level */
> +#define ENETFEC_DP_LOG(level, fmt, args...) \
> +       RTE_LOG_DP(level, PMD, fmt, ## args)
> +
> +#endif /* _ENETFEC_LOGS_H_ */
> diff --git a/drivers/net/enetfec/meson.build b/drivers/net/enetfec/meson.build
> new file mode 100644
> index 0000000000..252bf83309
> --- /dev/null
> +++ b/drivers/net/enetfec/meson.build
> @@ -0,0 +1,15 @@
> +# SPDX-License-Identifier: BSD-3-Clause
> +# Copyright 2021 NXP
> +
> +if not is_linux
> +       build = false
> +       reason = 'only supported on linux'

The doc specifies that only armv8 is supported.


> +endif
> +
> +deps += ['common_dpaax']
> +
> +sources = files('enet_ethdev.c')
> +
> +if cc.has_argument('-Wno-pointer-arith')
> +       cflags += '-Wno-pointer-arith'
> +endif

Can't this be fixed in the code rather than ignored?


> diff --git a/drivers/net/enetfec/version.map b/drivers/net/enetfec/version.map
> new file mode 100644
> index 0000000000..170c04fe53
> --- /dev/null
> +++ b/drivers/net/enetfec/version.map
> @@ -0,0 +1,3 @@
> +DPDK_20.0 {

Wrong ABI version.


> +        local: *;
> +};
> diff --git a/drivers/net/meson.build b/drivers/net/meson.build
> index bcf488f203..92f433d5e8 100644
> --- a/drivers/net/meson.build
> +++ b/drivers/net/meson.build
> @@ -19,6 +19,7 @@ drivers = [
>          'e1000',
>          'ena',
>          'enetc',
> +       'enetfec',

Indent.


>          'enic',
>          'failsafe',
>          'fm10k',
> --
> 2.17.1
>
Apeksha Gupta Sept. 10, 2021, 3:47 a.m. UTC | #2
> -----Original Message-----
> From: David Marchand <david.marchand@redhat.com>
> Sent: Friday, September 3, 2021 12:45 PM
> To: Apeksha Gupta <apeksha.gupta@nxp.com>
> Cc: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>; Yigit, Ferruh
> <ferruh.yigit@intel.com>; dev <dev@dpdk.org>; Hemant Agrawal
> <hemant.agrawal@nxp.com>; Sachin Saxena <sachin.saxena@nxp.com>
> Subject: [EXT] Re: [dpdk-dev] [PATCH v2 1/5] net/enetfec: introduce NXP
> ENETFEC driver
> 
> Caution: EXT Email
> 
> On Thu, Sep 2, 2021 at 8:01 PM Apeksha Gupta <apeksha.gupta@nxp.com>
> wrote:
> >
> > ENETFEC (Fast Ethernet Controller) is a network poll mode driver
> > for NXP SoC i.MX 8M Mini.
> >
> > This patch adds skeleton for enetfec driver with probe function.
> >
> > Signed-off-by: Sachin Saxena <sachin.saxena@nxp.com>
> > Signed-off-by: Apeksha Gupta <apeksha.gupta@nxp.com>
> > ---
> >  doc/guides/nics/enetfec.rst          | 121 ++++++++++++++++++++
> >  doc/guides/nics/features/enetfec.ini |   8 ++
> >  doc/guides/nics/index.rst            |   1 +
> >  drivers/net/enetfec/enet_ethdev.c    |  95 ++++++++++++++++
> >  drivers/net/enetfec/enet_ethdev.h    | 160 +++++++++++++++++++++++++++
> >  drivers/net/enetfec/enet_pmd_logs.h  |  31 ++++++
> >  drivers/net/enetfec/meson.build      |  15 +++
> >  drivers/net/enetfec/version.map      |   3 +
> >  drivers/net/meson.build              |   1 +
> >  9 files changed, 435 insertions(+)
> >  create mode 100644 doc/guides/nics/enetfec.rst
> >  create mode 100644 doc/guides/nics/features/enetfec.ini
> >  create mode 100644 drivers/net/enetfec/enet_ethdev.c
> >  create mode 100644 drivers/net/enetfec/enet_ethdev.h
> >  create mode 100644 drivers/net/enetfec/enet_pmd_logs.h
> >  create mode 100644 drivers/net/enetfec/meson.build
> >  create mode 100644 drivers/net/enetfec/version.map
> 
> Please update MAINTAINERS and release notes in this first patch.
[Apeksha] okay, added in v3.
> 
> >
> > diff --git a/doc/guides/nics/enetfec.rst b/doc/guides/nics/enetfec.rst
> > new file mode 100644
> > index 0000000000..f151bb26c4
> > --- /dev/null
> > +++ b/doc/guides/nics/enetfec.rst
> > @@ -0,0 +1,121 @@
> > +.. SPDX-License-Identifier: BSD-3-Clause
> > +   Copyright 2021 NXP
> > +
> > +ENETFEC Poll Mode Driver
> > +========================
> > +
> > +The ENETFEC NIC PMD (**librte_net_enetfec**) provides poll mode driver
> > +support for the inbuilt NIC found in the ** NXP i.MX 8M Mini** SoC.
> > +
> > +More information can be found at NXP Official Website
> >
> +<https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.
> nxp.com%2Fproducts%2Fprocessors-and-microcontrollers%2Farm-
> processors%2Fi-mx-applications-processors%2Fi-mx-8-processors%2Fi-mx-8m-
> mini-arm-cortex-a53-cortex-m4-audio-voice-
> video%3Ai.MX8MMINI&amp;data=04%7C01%7Capeksha.gupta%40nxp.com%7
> Ca965cce583974ae4b49408d96eaa8a58%7C686ea1d3bc2b4c6fa92cd99c5c301
> 635%7C0%7C1%7C637662501011576537%7CUnknown%7CTWFpbGZsb3d8eyJ
> WIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C
> 1000&amp;sdata=2iLDhMwWZvZjskijEk6IGUPNLzw8D0xhPsvwJe305ng%3D&am
> p;reserved=0>
> > +
> > +ENETFEC
> > +-------
> > +
> > +This section provides an overview of the NXP ENETFEC and how it is
> > +integrated into the DPDK.
> > +
> > +Contents summary
> > +
> > +- ENETFEC overview
> > +- ENETFEC features
> > +- Supported ENETFEC SoCs
> > +- Prerequisites
> > +- Driver compilation and testing
> > +- Limitations
> > +
> > +ENETFEC Overview
> > +~~~~~~~~~~~~~~~~
> > +The i.MX 8M Mini Media Applications Processor is built to achieve both high
> > +performance and low power consumption. ENETFEC is a hardware
> programmable
> > +packet forwarding engine to provide high performance Ethernet interface.
> > +The diagram below shows a system level overview of ENETFEC:
> > +
> > +
> ====================================================+============
> ===
> > +   US   +-----------------------------------------+    | Kernel Space
> > +        |                                         |    |
> > +        |              ENETFEC Driver             |    |
> > +        +-----------------------------------------+    |
> > +                          ^   |                        |
> > +   ENETFEC            RXQ |   | TXQ                   |
> > +   PMD                    |   |                       |
> > +                          |   v                       |   +----------+
> 
> Misalignment of the right part.
> 
> 
> > +                     +-------------+                   |   | fec-uio  |
> 
> What is fec-uio?
> I can't find it in upstream linux kernel.
[Apeksha] fec-uio is the kernel driver. We have also initiated the process of upstreaming it.
> 
> 
> > +                     | net_enetfec |                   |   +----------+
> > +                     +-------------+                   |
> > +                          ^   |                        |
> > +                      TXQ |   | RXQ                    |
> > +                          |   |                        |
> > +                          |   v                        |
> > +
> ===================================================+=============
> ==
> > +         +----------------------------------------+
> > +         |                                        |        HW
> > +         |  i.MX 8M MINI EVK                      |
> > +         |               +-----+                  |
> > +         |               | MAC |                  |
> > +         +---------------+-----+------------------+
> > +                        | PHY |
> > +                        +-----+
> 
> Misalignment.
> 
> 
> > +
> > +ENETFEC Ethernet driver is traditional DPDK PMD driver running in the
> userspace.
> > +The MAC and PHY are the hardware blocks. 'fec-uio' is the UIO driver,
> ENETFEC PMD
> > +uses UIO interface to interact with kernel for PHY initialisation and for
> mapping
> > +the allocated memory of register & BD in kernel with DPDK which gives
> access to
> > +non-cacheable memory for BD. net_enetfec is logical Ethernet interface,
> created by
> > +ENETFEC driver.
> > +
> > +- ENETFEC driver registers the device in virtual device driver.
> > +- RTE framework scans and will invoke the probe function of ENETFEC driver.
> > +- The probe function will set the basic device registers and also setups BD
> rings.
> > +- On packet Rx the respective BD Ring status bit is set which is then used for
> > +  packet processing.
> > +- Then Tx is done first followed by Rx via logical interfaces.
> > +
> > +ENETFEC Features
> > +~~~~~~~~~~~~~~~~~
> > +
> > +- ARMv8
> > +
> > +Supported ENETFEC SoCs
> > +~~~~~~~~~~~~~~~~~~~~~~
> > +
> > +- i.MX 8M Mini
> > +
> > +Prerequisites
> > +~~~~~~~~~~~~~
> > +
> > +There are three main pre-requisites for executing ENETFEC PMD on a i.MX
> 8M Mini
> > +compatible board:
> > +
> > +1. **ARM 64 Tool Chain**
> > +
> > +   For example, the `*aarch64* Linaro Toolchain
> <https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Freleases
> .linaro.org%2Fcomponents%2Ftoolchain%2Fbinaries%2F7.4-
> 2019.02%2Faarch64-linux-gnu%2Fgcc-linaro-7.4.1-2019.02-x86_64_aarch64-
> linux-
> gnu.tar.xz&amp;data=04%7C01%7Capeksha.gupta%40nxp.com%7Ca965cce583
> 974ae4b49408d96eaa8a58%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C
> 1%7C637662501011586493%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjA
> wMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp;sda
> ta=mHBmrwivWNwEJiXBQTR8EAADgrZtd44ggXqJFyRJxTA%3D&amp;reserved=0
> >`_.
> > +
> > +2. **Linux Kernel**
> > +
> > +  It can be obtained from `NXP's Github hosting
> <https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fsource.
> codeaurora.org%2Fexternal%2Fqoriq%2Fqoriq-
> components%2Flinux&amp;data=04%7C01%7Capeksha.gupta%40nxp.com%7Ca
> 965cce583974ae4b49408d96eaa8a58%7C686ea1d3bc2b4c6fa92cd99c5c30163
> 5%7C0%7C1%7C637662501011586493%7CUnknown%7CTWFpbGZsb3d8eyJWIj
> oiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C100
> 0&amp;sdata=4im4j9xK%2FlTxAa0aVyMFVwQ7Klmy3tnTaYSDtu9yVg8%3D&amp
> ;reserved=0>`_.
> > +
> > +3. **Rootfile system**
> > +
> > +   Any *aarch64* supporting filesystem can be used. For example,
> > +   Ubuntu 18.04 LTS (Bionic) or 20.04 LTS(Focal) userland which can be
> obtained
> > +   from `here
> <https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fcdimage.
> ubuntu.com%2Fubuntu-base%2Freleases%2F18.04%2Frelease%2Fubuntu-base-
> 18.04.1-base-
> arm64.tar.gz&amp;data=04%7C01%7Capeksha.gupta%40nxp.com%7Ca965cce5
> 83974ae4b49408d96eaa8a58%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%
> 7C1%7C637662501011586493%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wL
> jAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp;s
> data=jBnLNy7HsO%2BPVDOLY3tCizW%2Bvs%2FA86KjTTe73xBLGPY%3D&amp;r
> eserved=0>`_.
> > +
> > +4. The Ethernet device will be registered as virtual device, so ENETFEC has
> dependency on
> > +   **rte_bus_vdev** library and it is mandatory to use `--vdev` with value
> `net_enetfec` to
> > +   run DPDK application.
> > +
> > +Driver compilation and testing
> > +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > +
> > +Follow instructions available in the document
> > +:ref:`compiling and testing a PMD for a NIC <pmd_build_and_test>`
> > +to launch **testpmd**
> 
> dpdk-testpmd.
> 
> 
> > +
> > +Limitations
> > +~~~~~~~~~~~
> > +
> > +- Multi queue is not supported.
> > +- Link status is down always.
> > +- Single Ethernet interface.
> > diff --git a/doc/guides/nics/features/enetfec.ini
> b/doc/guides/nics/features/enetfec.ini
> > new file mode 100644
> > index 0000000000..5700697981
> > --- /dev/null
> > +++ b/doc/guides/nics/features/enetfec.ini
> > @@ -0,0 +1,8 @@
> > +;
> > +; Supported features of the 'enetfec' network poll mode driver.
> > +;
> > +; Refer to default.ini for the full list of available PMD features.
> > +;
> > +[Features]
> > +ARMv8                = Y
> > +Usage doc            = Y
> > diff --git a/doc/guides/nics/index.rst b/doc/guides/nics/index.rst
> > index 784d5d39f6..777fdab4a0 100644
> > --- a/doc/guides/nics/index.rst
> > +++ b/doc/guides/nics/index.rst
> > @@ -26,6 +26,7 @@ Network Interface Controller Drivers
> >      e1000em
> >      ena
> >      enetc
> > +    enetfec
> >      enic
> >      fm10k
> >      hinic
> > diff --git a/drivers/net/enetfec/enet_ethdev.c
> b/drivers/net/enetfec/enet_ethdev.c
> > new file mode 100644
> > index 0000000000..88774788cf
> > --- /dev/null
> > +++ b/drivers/net/enetfec/enet_ethdev.c
> > @@ -0,0 +1,95 @@
> > +/* SPDX-License-Identifier: BSD-3-Clause
> > + * Copyright 2020-2021 NXP
> > + */
> > +
> > +#include <stdio.h>
> > +#include <fcntl.h>
> > +#include <stdlib.h>
> > +#include <unistd.h>
> > +#include <errno.h>
> > +#include <rte_kvargs.h>
> > +#include <ethdev_vdev.h>
> > +#include <rte_bus_vdev.h>
> > +#include <rte_dev.h>
> > +#include <rte_ether.h>
> > +#include "enet_ethdev.h"
> > +#include "enet_pmd_logs.h"
> > +
> > +#define ENETFEC_NAME_PMD                net_enetfec
> > +#define ENETFEC_VDEV_GEM_ID_ARG         "intf"
> > +#define ENETFEC_CDEV_INVALID_FD         -1
> > +
> > +int enetfec_logtype_pmd;
> 
> If using RTE_LOG_REGISTER* macros (see below), you don't need this definition.
[Apeksha] okay.
> 
> 
> > +
> > +static int
> > +enetfec_eth_init(struct rte_eth_dev *dev)
> > +{
> > +       rte_eth_dev_probing_finish(dev);
> > +       return 0;
> > +}
> > +
> > +static int
> > +pmd_enetfec_probe(struct rte_vdev_device *vdev)
> > +{
> > +       struct rte_eth_dev *dev = NULL;
> > +       struct enetfec_private *fep;
> > +       const char *name;
> > +       int rc;
> > +
> > +       name = rte_vdev_device_name(vdev);
> > +       if (name == NULL)
> > +               return -EINVAL;
> > +       ENETFEC_PMD_LOG(INFO, "Initializing pmd_fec for %s", name);
> > +
> > +       dev = rte_eth_vdev_allocate(vdev, sizeof(*fep));
> > +       if (dev == NULL)
> > +               return -ENOMEM;
> > +
> > +       /* setup board info structure */
> > +       fep = dev->data->dev_private;
> > +       fep->dev = dev;
> > +       rc = enetfec_eth_init(dev);
> > +       if (rc)
> > +               goto failed_init;
> > +
> > +       return 0;
> > +
> > +failed_init:
> > +       ENETFEC_PMD_ERR("Failed to init");
> > +       return rc;
> > +}
> > +
> > +static int
> > +pmd_enetfec_remove(struct rte_vdev_device *vdev)
> > +{
> > +       struct rte_eth_dev *eth_dev = NULL;
> > +       int ret;
> > +
> > +       /* find the ethdev entry */
> > +       eth_dev = rte_eth_dev_allocated(rte_vdev_device_name(vdev));
> > +       if (eth_dev == NULL)
> > +               return -ENODEV;
> > +
> > +       ret = rte_eth_dev_release_port(eth_dev);
> > +       if (ret != 0)
> > +               return -EINVAL;
> > +
> > +       ENETFEC_PMD_INFO("Closing sw device");
> > +       return 0;
> > +}
> > +
> > +static struct rte_vdev_driver pmd_enetfec_drv = {
> > +       .probe = pmd_enetfec_probe,
> > +       .remove = pmd_enetfec_remove,
> > +};
> > +
> > +RTE_PMD_REGISTER_VDEV(ENETFEC_NAME_PMD, pmd_enetfec_drv);
> > +RTE_PMD_REGISTER_PARAM_STRING(ENETFEC_NAME_PMD,
> ENETFEC_VDEV_GEM_ID_ARG "=<int>");
> > +
> > +RTE_INIT(enetfec_pmd_init_log)
> > +{
> > +       int ret;
> > +       ret = rte_log_register_type_and_pick_level(ENETFEC_LOGTYPE_PREFIX
> "driver",
> > +                                                  RTE_LOG_NOTICE);
> > +       enetfec_logtype_pmd = (ret < 0) ? RTE_LOGTYPE_PMD : ret;
> > +}
> 
> Please use RTE_LOG_REGISTER_DEFAULT.
> 
> 
> > diff --git a/drivers/net/enetfec/enet_ethdev.h
> b/drivers/net/enetfec/enet_ethdev.h
> > new file mode 100644
> > index 0000000000..8c61176fb5
> > --- /dev/null
> > +++ b/drivers/net/enetfec/enet_ethdev.h
> > @@ -0,0 +1,160 @@
> > +/* SPDX-License-Identifier: BSD-3-Clause
> > + * Copyright 2020-2021 NXP
> > + */
> > +
> > +#ifndef __ENETFEC_ETHDEV_H__
> > +#define __ENETFEC_ETHDEV_H__
> > +
> > +#include <compat.h>
> > +#include <rte_ethdev.h>
> > +
> > +/* Common log type name prefix */
> > +#define ENETFEC_LOGTYPE_PREFIX "pmd.net.enetfec."
> > +
> > +/*
> > + * ENETFEC with AVB IP can support maximum 3 rx and tx queues.
> > + */
> > +#define ENETFEC_MAX_Q          3
> > +
> > +#define BD_LEN                 49152
> > +#define ENETFEC_TX_FR_SIZE     2048
> > +#define MAX_TX_BD_RING_SIZE    512     /* It should be power of 2 */
> > +#define MAX_RX_BD_RING_SIZE    512
> > +
> > +/* full duplex or half duplex */
> > +#define HALF_DUPLEX             0x00
> > +#define FULL_DUPLEX             0x01
> > +#define UNKNOWN_DUPLEX          0xff
> > +
> > +#define PKT_MAX_BUF_SIZE        1984
> > +#define OPT_FRAME_SIZE         (PKT_MAX_BUF_SIZE << 16)
> > +#define ETH_ALEN               RTE_ETHER_ADDR_LEN
> > +#define ETH_HLEN               RTE_ETHER_HDR_LEN
> > +#define VLAN_HLEN              4
> > +
> > +struct bufdesc {
> > +       uint16_t                bd_datlen;  /* buffer data length */
> > +       uint16_t                bd_sc;      /* buffer control & status */
> > +       uint32_t                bd_bufaddr; /* buffer address */
> > +};
> > +
> > +struct bufdesc_ex {
> > +       struct                  bufdesc desc;
> > +       uint32_t                bd_esc;
> > +       uint32_t                bd_prot;
> > +       uint32_t                bd_bdu;
> > +       uint32_t                ts;
> > +       uint16_t                res0[4];
> > +};
> > +
> > +struct bufdesc_prop {
> > +       int                     que_id;
> > +       /* Addresses of Tx and Rx buffers */
> > +       struct bufdesc          *base;
> > +       struct bufdesc          *last;
> > +       struct bufdesc          *cur;
> > +       void __iomem            *active_reg_desc;
> > +       uint64_t                descr_baseaddr_p;
> > +       unsigned short          ring_size;
> > +       unsigned char           d_size;
> > +       unsigned char           d_size_log2;
> > +};
> > +
> > +struct enetfec_priv_tx_q {
> > +       struct bufdesc_prop     bd;
> > +       struct rte_mbuf         *tx_mbuf[MAX_TX_BD_RING_SIZE];
> > +       struct bufdesc          *dirty_tx;
> > +       struct rte_mempool      *pool;
> > +       struct enetfec_private  *fep;
> > +};
> > +
> > +struct enetfec_priv_rx_q {
> > +       struct bufdesc_prop     bd;
> > +       struct rte_mbuf         *rx_mbuf[MAX_RX_BD_RING_SIZE];
> > +       struct rte_mempool      *pool;
> > +       struct enetfec_private  *fep;
> > +};
> > +
> > +/* Buffer descriptors of FEC are used to track the ring buffers. Buffer
> > + * descriptor base is x_bd_base. Currently available buffer are x_cur
> > + * and x_cur. where x is rx or tx. Current buffer is tracked by dirty_tx
> > + * that is sent by the controller.
> > + * The tx_cur and dirty_tx are same in completely full and empty
> > + * conditions. Actual condition is determined by empty & ready bits.
> > + */
> > +struct enetfec_private {
> > +       struct rte_eth_dev      *dev;
> > +       struct rte_eth_stats    stats;
> > +       struct rte_mempool      *pool;
> > +       uint16_t                max_rx_queues;
> > +       uint16_t                max_tx_queues;
> > +       unsigned int            total_tx_ring_size;
> > +       unsigned int            total_rx_ring_size;
> > +       bool                    bufdesc_ex;
> > +       unsigned int            tx_align;
> > +       unsigned int            rx_align;
> > +       int                     full_duplex;
> > +       unsigned int            phy_speed;
> > +       u_int32_t               quirks;
> > +       int                     flag_csum;
> > +       int                     flag_pause;
> > +       int                     flag_wol;
> > +       bool                    rgmii_txc_delay;
> > +       bool                    rgmii_rxc_delay;
> > +       int                     link;
> > +       void                    *hw_baseaddr_v;
> > +       uint64_t                hw_baseaddr_p;
> > +       void                    *bd_addr_v;
> > +       uint64_t                bd_addr_p;
> > +       uint64_t                bd_addr_p_r[ENETFEC_MAX_Q];
> > +       uint64_t                bd_addr_p_t[ENETFEC_MAX_Q];
> > +       void                    *dma_baseaddr_r[ENETFEC_MAX_Q];
> > +       void                    *dma_baseaddr_t[ENETFEC_MAX_Q];
> > +       uint64_t                cbus_size;
> > +       unsigned int            reg_size;
> > +       unsigned int            bd_size;
> > +       int                     hw_ts_rx_en;
> > +       int                     hw_ts_tx_en;
> > +       struct enetfec_priv_rx_q *rx_queues[ENETFEC_MAX_Q];
> > +       struct enetfec_priv_tx_q *tx_queues[ENETFEC_MAX_Q];
> > +};
> > +
> > +#define writel(v, p) ({*(volatile unsigned int *)(p) = (v); })
> > +#define readl(p) rte_read32(p)
> > +
> > +static inline struct
> > +bufdesc *enet_get_nextdesc(struct bufdesc *bdp, struct bufdesc_prop *bd)
> > +{
> > +       return (bdp >= bd->last) ? bd->base
> > +                       : (struct bufdesc *)(((void *)bdp) + bd->d_size);
> > +}
> > +
> > +static inline struct
> > +bufdesc *enet_get_prevdesc(struct bufdesc *bdp, struct bufdesc_prop *bd)
> > +{
> > +       return (bdp <= bd->base) ? bd->last
> > +                       : (struct bufdesc *)(((void *)bdp) - bd->d_size);
> > +}
> > +
> > +static inline int
> > +enet_get_bd_index(struct bufdesc *bdp, struct bufdesc_prop *bd)
> > +{
> > +       return ((const char *)bdp - (const char *)bd->base) >> bd->d_size_log2;
> > +}
> > +
> > +static inline int
> > +fls64(unsigned long word)
> > +{
> > +       return (64 - __builtin_clzl(word)) - 1;
> > +}
> > +
> > +uint16_t enetfec_recv_pkts(void *rxq1, __rte_unused struct rte_mbuf
> **rx_pkts,
> > +               uint16_t nb_pkts);
> > +uint16_t enetfec_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
> > +               uint16_t nb_pkts);
> > +struct bufdesc *enet_get_nextdesc(struct bufdesc *bdp,
> > +               struct bufdesc_prop *bd);
> > +int enet_new_rxbdp(struct enetfec_private *fep, struct bufdesc *bdp,
> > +               struct rte_mbuf *mbuf);
> > +
> > +#endif /*__ENETFEC_ETHDEV_H__*/
> > diff --git a/drivers/net/enetfec/enet_pmd_logs.h
> b/drivers/net/enetfec/enet_pmd_logs.h
> > new file mode 100644
> > index 0000000000..e7b3964a0e
> > --- /dev/null
> > +++ b/drivers/net/enetfec/enet_pmd_logs.h
> > @@ -0,0 +1,31 @@
> > +/* SPDX-License-Identifier: BSD-3-Clause
> > + * Copyright 2020-2021 NXP
> > + */
> > +
> > +#ifndef _ENETFEC_LOGS_H_
> > +#define _ENETFEC_LOGS_H_
> > +
> > +extern int enetfec_logtype_pmd;
> > +
> > +/* PMD related logs */
> > +#define ENETFEC_PMD_LOG(level, fmt, args...) \
> > +       rte_log(RTE_LOG_ ## level, enetfec_logtype_pmd, "\nfec_net: %s()" \
> > +               fmt "\n", __func__, ##args)
> > +
> > +#define PMD_INIT_FUNC_TRACE() ENET_PMD_LOG(DEBUG, " >>")
> > +
> > +#define ENETFEC_PMD_DEBUG(fmt, args...) \
> > +       ENETFEC_PMD_LOG(DEBUG, fmt, ## args)
> > +#define ENETFEC_PMD_ERR(fmt, args...) \
> > +       ENETFEC_PMD_LOG(ERR, fmt, ## args)
> > +#define ENETFEC_PMD_INFO(fmt, args...) \
> > +       ENETFEC_PMD_LOG(INFO, fmt, ## args)
> > +
> > +#define ENETFEC_PMD_WARN(fmt, args...) \
> > +       ENETFEC_PMD_LOG(WARNING, fmt, ## args)
> > +
> > +/* DP Logs, toggled out at compile time if level lower than current level */
> > +#define ENETFEC_DP_LOG(level, fmt, args...) \
> > +       RTE_LOG_DP(level, PMD, fmt, ## args)
> > +
> > +#endif /* _ENETFEC_LOGS_H_ */
> > diff --git a/drivers/net/enetfec/meson.build
> b/drivers/net/enetfec/meson.build
> > new file mode 100644
> > index 0000000000..252bf83309
> > --- /dev/null
> > +++ b/drivers/net/enetfec/meson.build
> > @@ -0,0 +1,15 @@
> > +# SPDX-License-Identifier: BSD-3-Clause
> > +# Copyright 2021 NXP
> > +
> > +if not is_linux
> > +       build = false
> > +       reason = 'only supported on linux'
> 
> The doc specifies that only armv8 is supported.
> 
> 
> > +endif
> > +
> > +deps += ['common_dpaax']
> > +
> > +sources = files('enet_ethdev.c')
> > +
> > +if cc.has_argument('-Wno-pointer-arith')
> > +       cflags += '-Wno-pointer-arith'
> > +endif
> 
> Can't this be fixed in the code rather than ignored?
> 
> 
> > diff --git a/drivers/net/enetfec/version.map
> b/drivers/net/enetfec/version.map
> > new file mode 100644
> > index 0000000000..170c04fe53
> > --- /dev/null
> > +++ b/drivers/net/enetfec/version.map
> > @@ -0,0 +1,3 @@
> > +DPDK_20.0 {
> 
> Wrong ABI version.
> 
> 
> > +        local: *;
> > +};
> > diff --git a/drivers/net/meson.build b/drivers/net/meson.build
> > index bcf488f203..92f433d5e8 100644
> > --- a/drivers/net/meson.build
> > +++ b/drivers/net/meson.build
> > @@ -19,6 +19,7 @@ drivers = [
> >          'e1000',
> >          'ena',
> >          'enetc',
> > +       'enetfec',
> 
> Indent.
> 
> 
> >          'enic',
> >          'failsafe',
> >          'fm10k',
> > --
> > 2.17.1
> >
> 
> --
> David Marchand
diff mbox series

Patch

diff --git a/doc/guides/nics/enetfec.rst b/doc/guides/nics/enetfec.rst
new file mode 100644
index 0000000000..f151bb26c4
--- /dev/null
+++ b/doc/guides/nics/enetfec.rst
@@ -0,0 +1,121 @@ 
+.. SPDX-License-Identifier: BSD-3-Clause
+   Copyright 2021 NXP
+
+ENETFEC Poll Mode Driver
+========================
+
+The ENETFEC NIC PMD (**librte_net_enetfec**) provides poll mode driver
+support for the inbuilt NIC found in the ** NXP i.MX 8M Mini** SoC.
+
+More information can be found at NXP Official Website
+<https://www.nxp.com/products/processors-and-microcontrollers/arm-processors/i-mx-applications-processors/i-mx-8-processors/i-mx-8m-mini-arm-cortex-a53-cortex-m4-audio-voice-video:i.MX8MMINI>
+
+ENETFEC
+-------
+
+This section provides an overview of the NXP ENETFEC and how it is
+integrated into the DPDK.
+
+Contents summary
+
+- ENETFEC overview
+- ENETFEC features
+- Supported ENETFEC SoCs
+- Prerequisites
+- Driver compilation and testing
+- Limitations
+
+ENETFEC Overview
+~~~~~~~~~~~~~~~~
+The i.MX 8M Mini Media Applications Processor is built to achieve both high
+performance and low power consumption. ENETFEC is a hardware programmable
+packet forwarding engine to provide high performance Ethernet interface.
+The diagram below shows a system level overview of ENETFEC:
+
+   ====================================================+===============
+   US   +-----------------------------------------+    | Kernel Space
+        |                                         |    |
+        |              ENETFEC Driver             |    |
+        +-----------------------------------------+    |
+                          ^   |                        |
+   ENETFEC            RXQ |   | TXQ		       |
+   PMD                    |   |         	       |
+                          |   v      		       |   +----------+
+                     +-------------+                   |   | fec-uio  |
+                     | net_enetfec |                   |   +----------+
+                     +-------------+                   |
+                          ^   |                        |
+                      TXQ |   | RXQ                    |
+                          |   |                        |
+                          |   v                        |
+    ===================================================+===============
+         +----------------------------------------+
+         |                                        |        HW
+         |  i.MX 8M MINI EVK                      |
+         |               +-----+                  |
+         |               | MAC |                  |
+         +---------------+-----+------------------+
+			 | PHY |
+			 +-----+
+
+ENETFEC Ethernet driver is traditional DPDK PMD driver running in the userspace.
+The MAC and PHY are the hardware blocks. 'fec-uio' is the UIO driver, ENETFEC PMD
+uses UIO interface to interact with kernel for PHY initialisation and for mapping
+the allocated memory of register & BD in kernel with DPDK which gives access to
+non-cacheable memory for BD. net_enetfec is logical Ethernet interface, created by
+ENETFEC driver.
+
+- ENETFEC driver registers the device in virtual device driver.
+- RTE framework scans and will invoke the probe function of ENETFEC driver.
+- The probe function will set the basic device registers and also setups BD rings.
+- On packet Rx the respective BD Ring status bit is set which is then used for
+  packet processing.
+- Then Tx is done first followed by Rx via logical interfaces.
+
+ENETFEC Features
+~~~~~~~~~~~~~~~~~
+
+- ARMv8
+
+Supported ENETFEC SoCs
+~~~~~~~~~~~~~~~~~~~~~~
+
+- i.MX 8M Mini
+
+Prerequisites
+~~~~~~~~~~~~~
+
+There are three main pre-requisites for executing ENETFEC PMD on a i.MX 8M Mini
+compatible board:
+
+1. **ARM 64 Tool Chain**
+
+   For example, the `*aarch64* Linaro Toolchain <https://releases.linaro.org/components/toolchain/binaries/7.4-2019.02/aarch64-linux-gnu/gcc-linaro-7.4.1-2019.02-x86_64_aarch64-linux-gnu.tar.xz>`_.
+
+2. **Linux Kernel**
+
+  It can be obtained from `NXP's Github hosting <https://source.codeaurora.org/external/qoriq/qoriq-components/linux>`_.
+
+3. **Rootfile system**
+
+   Any *aarch64* supporting filesystem can be used. For example,
+   Ubuntu 18.04 LTS (Bionic) or 20.04 LTS(Focal) userland which can be obtained
+   from `here <http://cdimage.ubuntu.com/ubuntu-base/releases/18.04/release/ubuntu-base-18.04.1-base-arm64.tar.gz>`_.
+
+4. The Ethernet device will be registered as virtual device, so ENETFEC has dependency on
+   **rte_bus_vdev** library and it is mandatory to use `--vdev` with value `net_enetfec` to
+   run DPDK application.
+
+Driver compilation and testing
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Follow instructions available in the document
+:ref:`compiling and testing a PMD for a NIC <pmd_build_and_test>`
+to launch **testpmd**
+
+Limitations
+~~~~~~~~~~~
+
+- Multi queue is not supported.
+- Link status is down always.
+- Single Ethernet interface.
diff --git a/doc/guides/nics/features/enetfec.ini b/doc/guides/nics/features/enetfec.ini
new file mode 100644
index 0000000000..5700697981
--- /dev/null
+++ b/doc/guides/nics/features/enetfec.ini
@@ -0,0 +1,8 @@ 
+;
+; Supported features of the 'enetfec' network poll mode driver.
+;
+; Refer to default.ini for the full list of available PMD features.
+;
+[Features]
+ARMv8                = Y
+Usage doc            = Y
diff --git a/doc/guides/nics/index.rst b/doc/guides/nics/index.rst
index 784d5d39f6..777fdab4a0 100644
--- a/doc/guides/nics/index.rst
+++ b/doc/guides/nics/index.rst
@@ -26,6 +26,7 @@  Network Interface Controller Drivers
     e1000em
     ena
     enetc
+    enetfec
     enic
     fm10k
     hinic
diff --git a/drivers/net/enetfec/enet_ethdev.c b/drivers/net/enetfec/enet_ethdev.c
new file mode 100644
index 0000000000..88774788cf
--- /dev/null
+++ b/drivers/net/enetfec/enet_ethdev.c
@@ -0,0 +1,95 @@ 
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright 2020-2021 NXP
+ */
+
+#include <stdio.h>
+#include <fcntl.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <errno.h>
+#include <rte_kvargs.h>
+#include <ethdev_vdev.h>
+#include <rte_bus_vdev.h>
+#include <rte_dev.h>
+#include <rte_ether.h>
+#include "enet_ethdev.h"
+#include "enet_pmd_logs.h"
+
+#define ENETFEC_NAME_PMD                net_enetfec
+#define ENETFEC_VDEV_GEM_ID_ARG         "intf"
+#define ENETFEC_CDEV_INVALID_FD         -1
+
+int enetfec_logtype_pmd;
+
+static int
+enetfec_eth_init(struct rte_eth_dev *dev)
+{
+	rte_eth_dev_probing_finish(dev);
+	return 0;
+}
+
+static int
+pmd_enetfec_probe(struct rte_vdev_device *vdev)
+{
+	struct rte_eth_dev *dev = NULL;
+	struct enetfec_private *fep;
+	const char *name;
+	int rc;
+
+	name = rte_vdev_device_name(vdev);
+	if (name == NULL)
+		return -EINVAL;
+	ENETFEC_PMD_LOG(INFO, "Initializing pmd_fec for %s", name);
+
+	dev = rte_eth_vdev_allocate(vdev, sizeof(*fep));
+	if (dev == NULL)
+		return -ENOMEM;
+
+	/* setup board info structure */
+	fep = dev->data->dev_private;
+	fep->dev = dev;
+	rc = enetfec_eth_init(dev);
+	if (rc)
+		goto failed_init;
+
+	return 0;
+
+failed_init:
+	ENETFEC_PMD_ERR("Failed to init");
+	return rc;
+}
+
+static int
+pmd_enetfec_remove(struct rte_vdev_device *vdev)
+{
+	struct rte_eth_dev *eth_dev = NULL;
+	int ret;
+
+	/* find the ethdev entry */
+	eth_dev = rte_eth_dev_allocated(rte_vdev_device_name(vdev));
+	if (eth_dev == NULL)
+		return -ENODEV;
+
+	ret = rte_eth_dev_release_port(eth_dev);
+	if (ret != 0)
+		return -EINVAL;
+
+	ENETFEC_PMD_INFO("Closing sw device");
+	return 0;
+}
+
+static struct rte_vdev_driver pmd_enetfec_drv = {
+	.probe = pmd_enetfec_probe,
+	.remove = pmd_enetfec_remove,
+};
+
+RTE_PMD_REGISTER_VDEV(ENETFEC_NAME_PMD, pmd_enetfec_drv);
+RTE_PMD_REGISTER_PARAM_STRING(ENETFEC_NAME_PMD, ENETFEC_VDEV_GEM_ID_ARG "=<int>");
+
+RTE_INIT(enetfec_pmd_init_log)
+{
+	int ret;
+	ret = rte_log_register_type_and_pick_level(ENETFEC_LOGTYPE_PREFIX "driver",
+						   RTE_LOG_NOTICE);
+	enetfec_logtype_pmd = (ret < 0) ? RTE_LOGTYPE_PMD : ret;
+}
diff --git a/drivers/net/enetfec/enet_ethdev.h b/drivers/net/enetfec/enet_ethdev.h
new file mode 100644
index 0000000000..8c61176fb5
--- /dev/null
+++ b/drivers/net/enetfec/enet_ethdev.h
@@ -0,0 +1,160 @@ 
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright 2020-2021 NXP
+ */
+
+#ifndef __ENETFEC_ETHDEV_H__
+#define __ENETFEC_ETHDEV_H__
+
+#include <compat.h>
+#include <rte_ethdev.h>
+
+/* Common log type name prefix */
+#define ENETFEC_LOGTYPE_PREFIX	"pmd.net.enetfec."
+
+/*
+ * ENETFEC with AVB IP can support maximum 3 rx and tx queues.
+ */
+#define ENETFEC_MAX_Q		3
+
+#define BD_LEN			49152
+#define ENETFEC_TX_FR_SIZE	2048
+#define MAX_TX_BD_RING_SIZE	512	/* It should be power of 2 */
+#define MAX_RX_BD_RING_SIZE	512
+
+/* full duplex or half duplex */
+#define HALF_DUPLEX             0x00
+#define FULL_DUPLEX             0x01
+#define UNKNOWN_DUPLEX          0xff
+
+#define PKT_MAX_BUF_SIZE        1984
+#define OPT_FRAME_SIZE		(PKT_MAX_BUF_SIZE << 16)
+#define ETH_ALEN		RTE_ETHER_ADDR_LEN
+#define ETH_HLEN		RTE_ETHER_HDR_LEN
+#define VLAN_HLEN		4
+
+struct bufdesc {
+	uint16_t		bd_datlen;  /* buffer data length */
+	uint16_t		bd_sc;	    /* buffer control & status */
+	uint32_t		bd_bufaddr; /* buffer address */
+};
+
+struct bufdesc_ex {
+	struct			bufdesc desc;
+	uint32_t		bd_esc;
+	uint32_t		bd_prot;
+	uint32_t		bd_bdu;
+	uint32_t		ts;
+	uint16_t		res0[4];
+};
+
+struct bufdesc_prop {
+	int			que_id;
+	/* Addresses of Tx and Rx buffers */
+	struct bufdesc		*base;
+	struct bufdesc		*last;
+	struct bufdesc		*cur;
+	void __iomem		*active_reg_desc;
+	uint64_t		descr_baseaddr_p;
+	unsigned short		ring_size;
+	unsigned char		d_size;
+	unsigned char		d_size_log2;
+};
+
+struct enetfec_priv_tx_q {
+	struct bufdesc_prop	bd;
+	struct rte_mbuf		*tx_mbuf[MAX_TX_BD_RING_SIZE];
+	struct bufdesc		*dirty_tx;
+	struct rte_mempool	*pool;
+	struct enetfec_private	*fep;
+};
+
+struct enetfec_priv_rx_q {
+	struct bufdesc_prop	bd;
+	struct rte_mbuf		*rx_mbuf[MAX_RX_BD_RING_SIZE];
+	struct rte_mempool	*pool;
+	struct enetfec_private	*fep;
+};
+
+/* Buffer descriptors of FEC are used to track the ring buffers. Buffer
+ * descriptor base is x_bd_base. Currently available buffer are x_cur
+ * and x_cur. where x is rx or tx. Current buffer is tracked by dirty_tx
+ * that is sent by the controller.
+ * The tx_cur and dirty_tx are same in completely full and empty
+ * conditions. Actual condition is determined by empty & ready bits.
+ */
+struct enetfec_private {
+	struct rte_eth_dev	*dev;
+	struct rte_eth_stats	stats;
+	struct rte_mempool	*pool;
+	uint16_t		max_rx_queues;
+	uint16_t		max_tx_queues;
+	unsigned int		total_tx_ring_size;
+	unsigned int		total_rx_ring_size;
+	bool			bufdesc_ex;
+	unsigned int		tx_align;
+	unsigned int		rx_align;
+	int			full_duplex;
+	unsigned int		phy_speed;
+	u_int32_t		quirks;
+	int			flag_csum;
+	int			flag_pause;
+	int			flag_wol;
+	bool			rgmii_txc_delay;
+	bool			rgmii_rxc_delay;
+	int			link;
+	void			*hw_baseaddr_v;
+	uint64_t		hw_baseaddr_p;
+	void			*bd_addr_v;
+	uint64_t		bd_addr_p;
+	uint64_t		bd_addr_p_r[ENETFEC_MAX_Q];
+	uint64_t		bd_addr_p_t[ENETFEC_MAX_Q];
+	void			*dma_baseaddr_r[ENETFEC_MAX_Q];
+	void			*dma_baseaddr_t[ENETFEC_MAX_Q];
+	uint64_t		cbus_size;
+	unsigned int		reg_size;
+	unsigned int		bd_size;
+	int			hw_ts_rx_en;
+	int			hw_ts_tx_en;
+	struct enetfec_priv_rx_q *rx_queues[ENETFEC_MAX_Q];
+	struct enetfec_priv_tx_q *tx_queues[ENETFEC_MAX_Q];
+};
+
+#define writel(v, p) ({*(volatile unsigned int *)(p) = (v); })
+#define readl(p) rte_read32(p)
+
+static inline struct
+bufdesc *enet_get_nextdesc(struct bufdesc *bdp, struct bufdesc_prop *bd)
+{
+	return (bdp >= bd->last) ? bd->base
+			: (struct bufdesc *)(((void *)bdp) + bd->d_size);
+}
+
+static inline struct
+bufdesc *enet_get_prevdesc(struct bufdesc *bdp, struct bufdesc_prop *bd)
+{
+	return (bdp <= bd->base) ? bd->last
+			: (struct bufdesc *)(((void *)bdp) - bd->d_size);
+}
+
+static inline int
+enet_get_bd_index(struct bufdesc *bdp, struct bufdesc_prop *bd)
+{
+	return ((const char *)bdp - (const char *)bd->base) >> bd->d_size_log2;
+}
+
+static inline int
+fls64(unsigned long word)
+{
+	return (64 - __builtin_clzl(word)) - 1;
+}
+
+uint16_t enetfec_recv_pkts(void *rxq1, __rte_unused struct rte_mbuf **rx_pkts,
+		uint16_t nb_pkts);
+uint16_t enetfec_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
+		uint16_t nb_pkts);
+struct bufdesc *enet_get_nextdesc(struct bufdesc *bdp,
+		struct bufdesc_prop *bd);
+int enet_new_rxbdp(struct enetfec_private *fep, struct bufdesc *bdp,
+		struct rte_mbuf *mbuf);
+
+#endif /*__ENETFEC_ETHDEV_H__*/
diff --git a/drivers/net/enetfec/enet_pmd_logs.h b/drivers/net/enetfec/enet_pmd_logs.h
new file mode 100644
index 0000000000..e7b3964a0e
--- /dev/null
+++ b/drivers/net/enetfec/enet_pmd_logs.h
@@ -0,0 +1,31 @@ 
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright 2020-2021 NXP
+ */
+
+#ifndef _ENETFEC_LOGS_H_
+#define _ENETFEC_LOGS_H_
+
+extern int enetfec_logtype_pmd;
+
+/* PMD related logs */
+#define ENETFEC_PMD_LOG(level, fmt, args...) \
+	rte_log(RTE_LOG_ ## level, enetfec_logtype_pmd, "\nfec_net: %s()" \
+		fmt "\n", __func__, ##args)
+
+#define PMD_INIT_FUNC_TRACE() ENET_PMD_LOG(DEBUG, " >>")
+
+#define ENETFEC_PMD_DEBUG(fmt, args...) \
+	ENETFEC_PMD_LOG(DEBUG, fmt, ## args)
+#define ENETFEC_PMD_ERR(fmt, args...) \
+	ENETFEC_PMD_LOG(ERR, fmt, ## args)
+#define ENETFEC_PMD_INFO(fmt, args...) \
+	ENETFEC_PMD_LOG(INFO, fmt, ## args)
+
+#define ENETFEC_PMD_WARN(fmt, args...) \
+	ENETFEC_PMD_LOG(WARNING, fmt, ## args)
+
+/* DP Logs, toggled out at compile time if level lower than current level */
+#define ENETFEC_DP_LOG(level, fmt, args...) \
+	RTE_LOG_DP(level, PMD, fmt, ## args)
+
+#endif /* _ENETFEC_LOGS_H_ */
diff --git a/drivers/net/enetfec/meson.build b/drivers/net/enetfec/meson.build
new file mode 100644
index 0000000000..252bf83309
--- /dev/null
+++ b/drivers/net/enetfec/meson.build
@@ -0,0 +1,15 @@ 
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright 2021 NXP
+
+if not is_linux
+	build = false
+	reason = 'only supported on linux'
+endif
+
+deps += ['common_dpaax']
+
+sources = files('enet_ethdev.c')
+
+if cc.has_argument('-Wno-pointer-arith')
+	cflags += '-Wno-pointer-arith'
+endif
diff --git a/drivers/net/enetfec/version.map b/drivers/net/enetfec/version.map
new file mode 100644
index 0000000000..170c04fe53
--- /dev/null
+++ b/drivers/net/enetfec/version.map
@@ -0,0 +1,3 @@ 
+DPDK_20.0 {
+        local: *;
+};
diff --git a/drivers/net/meson.build b/drivers/net/meson.build
index bcf488f203..92f433d5e8 100644
--- a/drivers/net/meson.build
+++ b/drivers/net/meson.build
@@ -19,6 +19,7 @@  drivers = [
         'e1000',
         'ena',
         'enetc',
+	'enetfec',
         'enic',
         'failsafe',
         'fm10k',