From patchwork Wed Jun 23 03:55:40 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Richael Zhuang X-Patchwork-Id: 94694 X-Patchwork-Delegate: thomas@monjalon.net Return-Path: X-Original-To: patchwork@inbox.dpdk.org Delivered-To: patchwork@inbox.dpdk.org Received: from mails.dpdk.org (mails.dpdk.org [217.70.189.124]) by inbox.dpdk.org (Postfix) with ESMTP id E5032A0C41; Wed, 23 Jun 2021 05:56:03 +0200 (CEST) Received: from [217.70.189.124] (localhost [127.0.0.1]) by mails.dpdk.org (Postfix) with ESMTP id 09B884069C; Wed, 23 Jun 2021 05:56:03 +0200 (CEST) Received: from foss.arm.com (foss.arm.com [217.140.110.172]) by mails.dpdk.org (Postfix) with ESMTP id 4643040687 for ; Wed, 23 Jun 2021 05:56:01 +0200 (CEST) Received: from usa-sjc-imap-foss1.foss.arm.com (unknown [10.121.207.14]) by usa-sjc-mx-foss1.foss.arm.com (Postfix) with ESMTP id A3E2D31B; Tue, 22 Jun 2021 20:56:00 -0700 (PDT) Received: from wls-arm-cavium06.shanghai.arm.com (wls-arm-cavium06.shanghai.arm.com [10.169.206.120]) by usa-sjc-imap-foss1.foss.arm.com (Postfix) with ESMTPSA id D02823F694; Tue, 22 Jun 2021 20:55:58 -0700 (PDT) From: Richael Zhuang To: dev@dpdk.org Cc: yux.jiang@intel.com, David Hunt Date: Wed, 23 Jun 2021 11:55:40 +0800 Message-Id: <20210623035541.50543-2-richael.zhuang@arm.com> X-Mailer: git-send-email 2.20.1 In-Reply-To: <20210623035541.50543-1-richael.zhuang@arm.com> References: <20210512035709.37755-2-richael.zhuang@arm.com> <20210623035541.50543-1-richael.zhuang@arm.com> MIME-Version: 1.0 Subject: [dpdk-dev] [PATCH v4 1/2] power: add support for cppc cpufreq X-BeenThere: dev@dpdk.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: DPDK patches and discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: dev-bounces@dpdk.org Sender: "dev" Currently in DPDK only acpi_cpufreq and pstate_cpufreq drivers are supported, which are both not available on arm64 platforms. Add support for cppc_cpufreq driver which works on most arm64 platforms. Signed-off-by: Richael Zhuang Reviewed-by: David Hunt --- app/test/test_power.c | 3 +- app/test/test_power_cpufreq.c | 3 +- lib/power/meson.build | 1 + lib/power/power_cppc_cpufreq.c | 632 +++++++++++++++++++++++++++++++++ lib/power/power_cppc_cpufreq.h | 229 ++++++++++++ lib/power/rte_power.c | 26 ++ lib/power/rte_power.h | 2 +- 7 files changed, 893 insertions(+), 3 deletions(-) create mode 100644 lib/power/power_cppc_cpufreq.c create mode 100644 lib/power/power_cppc_cpufreq.h diff --git a/app/test/test_power.c b/app/test/test_power.c index da1d67c0a..b7b556134 100644 --- a/app/test/test_power.c +++ b/app/test/test_power.c @@ -133,7 +133,8 @@ test_power(void) /* Perform tests for valid environments.*/ const enum power_management_env envs[] = {PM_ENV_ACPI_CPUFREQ, PM_ENV_KVM_VM, - PM_ENV_PSTATE_CPUFREQ}; + PM_ENV_PSTATE_CPUFREQ, + PM_ENV_CPPC_CPUFREQ}; unsigned int i; for (i = 0; i < RTE_DIM(envs); ++i) { diff --git a/app/test/test_power_cpufreq.c b/app/test/test_power_cpufreq.c index 0c3adc5f3..8516df4ca 100644 --- a/app/test/test_power_cpufreq.c +++ b/app/test/test_power_cpufreq.c @@ -496,7 +496,8 @@ test_power_cpufreq(void) /* Test environment configuration */ env = rte_power_get_env(); - if ((env != PM_ENV_ACPI_CPUFREQ) && (env != PM_ENV_PSTATE_CPUFREQ)) { + if ((env != PM_ENV_ACPI_CPUFREQ) && (env != PM_ENV_PSTATE_CPUFREQ) && + (env != PM_ENV_CPPC_CPUFREQ)) { printf("Unexpectedly got an environment other than ACPI/PSTATE\n"); goto fail_all; } diff --git a/lib/power/meson.build b/lib/power/meson.build index 74c5f3a29..4a5b07292 100644 --- a/lib/power/meson.build +++ b/lib/power/meson.build @@ -21,6 +21,7 @@ sources = files( 'rte_power.c', 'rte_power_empty_poll.c', 'rte_power_pmd_mgmt.c', + 'power_cppc_cpufreq.c', ) headers = files( 'rte_power.h', diff --git a/lib/power/power_cppc_cpufreq.c b/lib/power/power_cppc_cpufreq.c new file mode 100644 index 000000000..fd4483e52 --- /dev/null +++ b/lib/power/power_cppc_cpufreq.c @@ -0,0 +1,632 @@ +/* SPDX-License-Identifier: BSD-3-Clause + * Copyright(c) 2021 Arm Limited + */ + +#include +#include + +#include "power_cppc_cpufreq.h" +#include "power_common.h" + +/* macros used for rounding frequency to nearest 100000 */ +#define FREQ_ROUNDING_DELTA 50000 +#define ROUND_FREQ_TO_N_100000 100000 + +/* the unit of highest_perf and nominal_perf differs on different arm platforms. + * For highest_perf, it maybe 300 or 3000000, both means 3.0GHz. + */ +#define UNIT_DIFF 10000 + +#define POWER_CONVERT_TO_DECIMAL 10 + +#define POWER_GOVERNOR_USERSPACE "userspace" +#define POWER_SYSFILE_SETSPEED \ + "/sys/devices/system/cpu/cpu%u/cpufreq/scaling_setspeed" +#define POWER_SYSFILE_SCALING_MAX_FREQ \ + "/sys/devices/system/cpu/cpu%u/cpufreq/scaling_max_freq" +#define POWER_SYSFILE_SCALING_MIN_FREQ \ + "/sys/devices/system/cpu/cpu%u/cpufreq/scaling_min_freq" +#define POWER_SYSFILE_HIGHEST_PERF \ + "/sys/devices/system/cpu/cpu%u/acpi_cppc/highest_perf" +#define POWER_SYSFILE_NOMINAL_PERF \ + "/sys/devices/system/cpu/cpu%u/acpi_cppc/nominal_perf" +#define POWER_SYSFILE_SYS_MAX \ + "/sys/devices/system/cpu/cpu%u/cpufreq/cpuinfo_max_freq" + +#define POWER_CPPC_DRIVER "cppc-cpufreq" +#define BUS_FREQ 100000 + +enum power_state { + POWER_IDLE = 0, + POWER_ONGOING, + POWER_USED, + POWER_UNKNOWN +}; + +/** + * Power info per lcore. + */ +struct cppc_power_info { + unsigned int lcore_id; /**< Logical core id */ + uint32_t state; /**< Power in use state */ + FILE *f; /**< FD of scaling_setspeed */ + char governor_ori[32]; /**< Original governor name */ + uint32_t curr_idx; /**< Freq index in freqs array */ + uint32_t highest_perf; /**< system wide max freq */ + uint32_t nominal_perf; /**< system wide nominal freq */ + uint16_t turbo_available; /**< Turbo Boost available */ + uint16_t turbo_enable; /**< Turbo Boost enable/disable */ + uint32_t nb_freqs; /**< number of available freqs */ + uint32_t freqs[RTE_MAX_LCORE_FREQS]; /**< Frequency array */ +} __rte_cache_aligned; + +static struct cppc_power_info lcore_power_info[RTE_MAX_LCORE]; + +/** + * It is to set specific freq for specific logical core, according to the index + * of supported frequencies. + */ +static int +set_freq_internal(struct cppc_power_info *pi, uint32_t idx) +{ + if (idx >= RTE_MAX_LCORE_FREQS || idx >= pi->nb_freqs) { + RTE_LOG(ERR, POWER, "Invalid frequency index %u, which " + "should be less than %u\n", idx, pi->nb_freqs); + return -1; + } + + /* Check if it is the same as current */ + if (idx == pi->curr_idx) + return 0; + + POWER_DEBUG_TRACE("Frequency[%u] %u to be set for lcore %u\n", + idx, pi->freqs[idx], pi->lcore_id); + if (fseek(pi->f, 0, SEEK_SET) < 0) { + RTE_LOG(ERR, POWER, "Fail to set file position indicator to 0 " + "for setting frequency for lcore %u\n", pi->lcore_id); + return -1; + } + if (fprintf(pi->f, "%u", pi->freqs[idx]) < 0) { + RTE_LOG(ERR, POWER, "Fail to write new frequency for " + "lcore %u\n", pi->lcore_id); + return -1; + } + fflush(pi->f); + pi->curr_idx = idx; + + return 1; +} + +/** + * It is to check the current scaling governor by reading sys file, and then + * set it into 'userspace' if it is not by writing the sys file. The original + * governor will be saved for rolling back. + */ +static int +power_set_governor_userspace(struct cppc_power_info *pi) +{ + return power_set_governor(pi->lcore_id, POWER_GOVERNOR_USERSPACE, + pi->governor_ori, sizeof(pi->governor_ori)); +} + +static int +power_check_turbo(struct cppc_power_info *pi) +{ + FILE *f_nom, *f_max, *f_cmax; + int ret = -1; + uint32_t nominal_perf = 0, highest_perf = 0, cpuinfo_max_freq = 0; + + open_core_sysfs_file(POWER_SYSFILE_HIGHEST_PERF, pi->lcore_id, "r", + &f_max); + FOPEN_OR_ERR_GOTO(f_max, err); + + open_core_sysfs_file(POWER_SYSFILE_NOMINAL_PERF, pi->lcore_id, "r", + &f_nom); + FOPEN_OR_ERR_GOTO(f_nom, err); + + open_core_sysfs_file(POWER_SYSFILE_SYS_MAX, pi->lcore_id, "r", + &f_cmax); + FOPEN_OR_ERR_GOTO(f_cmax, err); + + ret = read_core_sysfs_u32(f_max, &highest_perf); + FOPS_OR_ERR_GOTO(ret, err); + + ret = read_core_sysfs_u32(f_nom, &nominal_perf); + FOPS_OR_ERR_GOTO(ret, err); + + ret = read_core_sysfs_u32(f_cmax, &cpuinfo_max_freq); + FOPS_OR_ERR_GOTO(ret, err); + + pi->highest_perf = highest_perf; + pi->nominal_perf = nominal_perf; + + if ((highest_perf > nominal_perf) && ((cpuinfo_max_freq == highest_perf) || + cpuinfo_max_freq == highest_perf * UNIT_DIFF)) { + pi->turbo_available = 1; + pi->turbo_enable = 1; + ret = 0; + POWER_DEBUG_TRACE("Lcore %u can do Turbo Boost! highest perf %u, " + "nominal perf %u\n", + pi->lcore_id, highest_perf, nominal_perf); + } else { + pi->turbo_available = 0; + pi->turbo_enable = 0; + POWER_DEBUG_TRACE("Lcore %u Turbo not available! highest perf %u, " + "nominal perf %u\n", + pi->lcore_id, highest_perf, nominal_perf); + } + +err: + if (f_max != NULL) + fclose(f_max); + if (f_nom != NULL) + fclose(f_nom); + if (f_cmax != NULL) + fclose(f_cmax); + + return ret; +} + +/** + * It is to get the available frequencies of the specific lcore by reading the + * sys file. + */ +static int +power_get_available_freqs(struct cppc_power_info *pi) +{ + FILE *f_min, *f_max; + int ret = -1; + uint32_t scaling_min_freq = 0, scaling_max_freq = 0, nominal_perf = 0; + uint32_t i, num_freqs = 0; + + open_core_sysfs_file(POWER_SYSFILE_SCALING_MAX_FREQ, pi->lcore_id, "r", + &f_max); + FOPEN_OR_ERR_GOTO(f_max, out); + + open_core_sysfs_file(POWER_SYSFILE_SCALING_MIN_FREQ, pi->lcore_id, "r", + &f_min); + FOPEN_OR_ERR_GOTO(f_min, out); + + ret = read_core_sysfs_u32(f_max, &scaling_max_freq); + FOPS_OR_ERR_GOTO(ret, out); + + ret = read_core_sysfs_u32(f_min, &scaling_min_freq); + FOPS_OR_ERR_GOTO(ret, out); + + power_check_turbo(pi); + + if (scaling_max_freq < scaling_min_freq) + goto out; + + /* If turbo is available then there is one extra freq bucket + * to store the sys max freq which value is scaling_max_freq + */ + nominal_perf = (pi->nominal_perf < UNIT_DIFF) ? + pi->nominal_perf * UNIT_DIFF : pi->nominal_perf; + num_freqs = (nominal_perf - scaling_min_freq) / BUS_FREQ + 1 + + pi->turbo_available; + + /* Generate the freq bucket array. */ + for (i = 0, pi->nb_freqs = 0; i < num_freqs; i++) { + if ((i == 0) && pi->turbo_available) + pi->freqs[pi->nb_freqs++] = scaling_max_freq; + else + pi->freqs[pi->nb_freqs++] = + nominal_perf - (i - pi->turbo_available) * BUS_FREQ; + } + + ret = 0; + + POWER_DEBUG_TRACE("%d frequency(s) of lcore %u are available\n", + num_freqs, pi->lcore_id); + +out: + if (f_min != NULL) + fclose(f_min); + if (f_max != NULL) + fclose(f_max); + + return ret; +} + +/** + * It is to fopen the sys file for the future setting the lcore frequency. + */ +static int +power_init_for_setting_freq(struct cppc_power_info *pi) +{ + FILE *f; + char buf[BUFSIZ]; + uint32_t i, freq; + int ret; + + open_core_sysfs_file(POWER_SYSFILE_SETSPEED, pi->lcore_id, "rw+", + &f); + FOPEN_OR_ERR_GOTO(f, err); + + ret = read_core_sysfs_s(f, buf, sizeof(buf)); + FOPS_OR_ERR_GOTO(ret, err); + + freq = strtoul(buf, NULL, POWER_CONVERT_TO_DECIMAL); + + /* convert the frequency to nearest 100000 value + * Ex: if freq=1396789 then freq_conv=1400000 + * Ex: if freq=800030 then freq_conv=800000 + */ + unsigned int freq_conv = 0; + freq_conv = (freq + FREQ_ROUNDING_DELTA) + / ROUND_FREQ_TO_N_100000; + freq_conv = freq_conv * ROUND_FREQ_TO_N_100000; + + for (i = 0; i < pi->nb_freqs; i++) { + if (freq_conv == pi->freqs[i]) { + pi->curr_idx = i; + pi->f = f; + return 0; + } + } + +err: + if (f != NULL) + fclose(f); + + return -1; +} + +int +power_cppc_cpufreq_check_supported(void) +{ + return cpufreq_check_scaling_driver(POWER_CPPC_DRIVER); +} + +int +power_cppc_cpufreq_init(unsigned int lcore_id) +{ + struct cppc_power_info *pi; + uint32_t exp_state; + + if (lcore_id >= RTE_MAX_LCORE) { + RTE_LOG(ERR, POWER, "Lcore id %u can not exceeds %u\n", + lcore_id, RTE_MAX_LCORE - 1U); + return -1; + } + + pi = &lcore_power_info[lcore_id]; + exp_state = POWER_IDLE; + /* The power in use state works as a guard variable between + * the CPU frequency control initialization and exit process. + * The ACQUIRE memory ordering here pairs with the RELEASE + * ordering below as lock to make sure the frequency operations + * in the critical section are done under the correct state. + */ + if (!__atomic_compare_exchange_n(&(pi->state), &exp_state, + POWER_ONGOING, 0, + __ATOMIC_ACQUIRE, __ATOMIC_RELAXED)) { + RTE_LOG(INFO, POWER, "Power management of lcore %u is " + "in use\n", lcore_id); + return -1; + } + + pi->lcore_id = lcore_id; + /* Check and set the governor */ + if (power_set_governor_userspace(pi) < 0) { + RTE_LOG(ERR, POWER, "Cannot set governor of lcore %u to " + "userspace\n", lcore_id); + goto fail; + } + + /* Get the available frequencies */ + if (power_get_available_freqs(pi) < 0) { + RTE_LOG(ERR, POWER, "Cannot get available frequencies of " + "lcore %u\n", lcore_id); + goto fail; + } + + /* Init for setting lcore frequency */ + if (power_init_for_setting_freq(pi) < 0) { + RTE_LOG(ERR, POWER, "Cannot init for setting frequency for " + "lcore %u\n", lcore_id); + goto fail; + } + + /* Set freq to max by default */ + if (power_cppc_cpufreq_freq_max(lcore_id) < 0) { + RTE_LOG(ERR, POWER, "Cannot set frequency of lcore %u " + "to max\n", lcore_id); + goto fail; + } + + RTE_LOG(INFO, POWER, "Initialized successfully for lcore %u " + "power management\n", lcore_id); + + __atomic_store_n(&(pi->state), POWER_USED, __ATOMIC_RELEASE); + + return 0; + +fail: + __atomic_store_n(&(pi->state), POWER_UNKNOWN, __ATOMIC_RELEASE); + return -1; +} + +/** + * It is to check the governor and then set the original governor back if + * needed by writing the sys file. + */ +static int +power_set_governor_original(struct cppc_power_info *pi) +{ + return power_set_governor(pi->lcore_id, pi->governor_ori, NULL, 0); +} + +int +power_cppc_cpufreq_exit(unsigned int lcore_id) +{ + struct cppc_power_info *pi; + uint32_t exp_state; + + if (lcore_id >= RTE_MAX_LCORE) { + RTE_LOG(ERR, POWER, "Lcore id %u can not exceeds %u\n", + lcore_id, RTE_MAX_LCORE - 1U); + return -1; + } + pi = &lcore_power_info[lcore_id]; + exp_state = POWER_USED; + /* The power in use state works as a guard variable between + * the CPU frequency control initialization and exit process. + * The ACQUIRE memory ordering here pairs with the RELEASE + * ordering below as lock to make sure the frequency operations + * in the critical section are done under the correct state. + */ + if (!__atomic_compare_exchange_n(&(pi->state), &exp_state, + POWER_ONGOING, 0, + __ATOMIC_ACQUIRE, __ATOMIC_RELAXED)) { + RTE_LOG(INFO, POWER, "Power management of lcore %u is " + "not used\n", lcore_id); + return -1; + } + + /* Close FD of setting freq */ + fclose(pi->f); + pi->f = NULL; + + /* Set the governor back to the original */ + if (power_set_governor_original(pi) < 0) { + RTE_LOG(ERR, POWER, "Cannot set the governor of %u back " + "to the original\n", lcore_id); + goto fail; + } + + RTE_LOG(INFO, POWER, "Power management of lcore %u has exited from " + "'userspace' mode and been set back to the " + "original\n", lcore_id); + __atomic_store_n(&(pi->state), POWER_IDLE, __ATOMIC_RELEASE); + + return 0; + +fail: + __atomic_store_n(&(pi->state), POWER_UNKNOWN, __ATOMIC_RELEASE); + + return -1; +} + +uint32_t +power_cppc_cpufreq_freqs(unsigned int lcore_id, uint32_t *freqs, uint32_t num) +{ + struct cppc_power_info *pi; + + if (lcore_id >= RTE_MAX_LCORE) { + RTE_LOG(ERR, POWER, "Invalid lcore ID\n"); + return 0; + } + + if (freqs == NULL) { + RTE_LOG(ERR, POWER, "NULL buffer supplied\n"); + return 0; + } + + pi = &lcore_power_info[lcore_id]; + if (num < pi->nb_freqs) { + RTE_LOG(ERR, POWER, "Buffer size is not enough\n"); + return 0; + } + rte_memcpy(freqs, pi->freqs, pi->nb_freqs * sizeof(uint32_t)); + + return pi->nb_freqs; +} + +uint32_t +power_cppc_cpufreq_get_freq(unsigned int lcore_id) +{ + if (lcore_id >= RTE_MAX_LCORE) { + RTE_LOG(ERR, POWER, "Invalid lcore ID\n"); + return RTE_POWER_INVALID_FREQ_INDEX; + } + + return lcore_power_info[lcore_id].curr_idx; +} + +int +power_cppc_cpufreq_set_freq(unsigned int lcore_id, uint32_t index) +{ + if (lcore_id >= RTE_MAX_LCORE) { + RTE_LOG(ERR, POWER, "Invalid lcore ID\n"); + return -1; + } + + return set_freq_internal(&(lcore_power_info[lcore_id]), index); +} + +int +power_cppc_cpufreq_freq_down(unsigned int lcore_id) +{ + struct cppc_power_info *pi; + + if (lcore_id >= RTE_MAX_LCORE) { + RTE_LOG(ERR, POWER, "Invalid lcore ID\n"); + return -1; + } + + pi = &lcore_power_info[lcore_id]; + if (pi->curr_idx + 1 == pi->nb_freqs) + return 0; + + /* Frequencies in the array are from high to low. */ + return set_freq_internal(pi, pi->curr_idx + 1); +} + +int +power_cppc_cpufreq_freq_up(unsigned int lcore_id) +{ + struct cppc_power_info *pi; + + if (lcore_id >= RTE_MAX_LCORE) { + RTE_LOG(ERR, POWER, "Invalid lcore ID\n"); + return -1; + } + + pi = &lcore_power_info[lcore_id]; + if (pi->curr_idx == 0 || (pi->curr_idx == 1 && + pi->turbo_available && !pi->turbo_enable)) + return 0; + + /* Frequencies in the array are from high to low. */ + return set_freq_internal(pi, pi->curr_idx - 1); +} + +int +power_cppc_cpufreq_freq_max(unsigned int lcore_id) +{ + if (lcore_id >= RTE_MAX_LCORE) { + RTE_LOG(ERR, POWER, "Invalid lcore ID\n"); + return -1; + } + + /* Frequencies in the array are from high to low. */ + if (lcore_power_info[lcore_id].turbo_available) { + if (lcore_power_info[lcore_id].turbo_enable) + /* Set to Turbo */ + return set_freq_internal( + &lcore_power_info[lcore_id], 0); + else + /* Set to max non-turbo */ + return set_freq_internal( + &lcore_power_info[lcore_id], 1); + } else + return set_freq_internal(&lcore_power_info[lcore_id], 0); +} + +int +power_cppc_cpufreq_freq_min(unsigned int lcore_id) +{ + struct cppc_power_info *pi; + + if (lcore_id >= RTE_MAX_LCORE) { + RTE_LOG(ERR, POWER, "Invalid lcore ID\n"); + return -1; + } + + pi = &lcore_power_info[lcore_id]; + + /* Frequencies in the array are from high to low. */ + return set_freq_internal(pi, pi->nb_freqs - 1); +} + +int +power_cppc_turbo_status(unsigned int lcore_id) +{ + struct cppc_power_info *pi; + + if (lcore_id >= RTE_MAX_LCORE) { + RTE_LOG(ERR, POWER, "Invalid lcore ID\n"); + return -1; + } + + pi = &lcore_power_info[lcore_id]; + + return pi->turbo_enable; +} + +int +power_cppc_enable_turbo(unsigned int lcore_id) +{ + struct cppc_power_info *pi; + + if (lcore_id >= RTE_MAX_LCORE) { + RTE_LOG(ERR, POWER, "Invalid lcore ID\n"); + return -1; + } + + pi = &lcore_power_info[lcore_id]; + + if (pi->turbo_available) + pi->turbo_enable = 1; + else { + pi->turbo_enable = 0; + RTE_LOG(ERR, POWER, + "Failed to enable turbo on lcore %u\n", + lcore_id); + return -1; + } + + /* TODO: must set to max once enbling Turbo? Considering add condition: + * if ((pi->turbo_available) && (pi->curr_idx <= 1)) + */ + /* Max may have changed, so call to max function */ + if (power_cppc_cpufreq_freq_max(lcore_id) < 0) { + RTE_LOG(ERR, POWER, + "Failed to set frequency of lcore %u to max\n", + lcore_id); + return -1; + } + + return 0; +} + +int +power_cppc_disable_turbo(unsigned int lcore_id) +{ + struct cppc_power_info *pi; + + if (lcore_id >= RTE_MAX_LCORE) { + RTE_LOG(ERR, POWER, "Invalid lcore ID\n"); + return -1; + } + + pi = &lcore_power_info[lcore_id]; + + pi->turbo_enable = 0; + + if ((pi->turbo_available) && (pi->curr_idx <= 1)) { + /* Try to set freq to max by default coming out of turbo */ + if (power_cppc_cpufreq_freq_max(lcore_id) < 0) { + RTE_LOG(ERR, POWER, + "Failed to set frequency of lcore %u to max\n", + lcore_id); + return -1; + } + } + + return 0; +} + +int +power_cppc_get_capabilities(unsigned int lcore_id, + struct rte_power_core_capabilities *caps) +{ + struct cppc_power_info *pi; + + if (lcore_id >= RTE_MAX_LCORE) { + RTE_LOG(ERR, POWER, "Invalid lcore ID\n"); + return -1; + } + if (caps == NULL) { + RTE_LOG(ERR, POWER, "Invalid argument\n"); + return -1; + } + + pi = &lcore_power_info[lcore_id]; + caps->capabilities = 0; + caps->turbo = !!(pi->turbo_available); + + return 0; +} diff --git a/lib/power/power_cppc_cpufreq.h b/lib/power/power_cppc_cpufreq.h new file mode 100644 index 000000000..427ce4f83 --- /dev/null +++ b/lib/power/power_cppc_cpufreq.h @@ -0,0 +1,229 @@ +/* SPDX-License-Identifier: BSD-3-Clause + * Copyright(c) 2021 Arm Limited + */ + +#ifndef _POWER_CPPC_CPUFREQ_H +#define _POWER_CPPC_CPUFREQ_H + +/** + * @file + * RTE Power Management via userspace CPPC cpufreq + */ + +#include +#include +#include +#include +#include "rte_power.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * Check if CPPC power management is supported. + * + * @return + * - 1 if supported + * - 0 if unsupported + * - -1 if error, with rte_errno indicating reason for error. + */ +int power_cppc_cpufreq_check_supported(void); + +/** + * Initialize power management for a specific lcore. It will check and set the + * governor to userspace for the lcore, get the available frequencies, and + * prepare to set new lcore frequency. + * + * @param lcore_id + * lcore id. + * + * @return + * - 0 on success. + * - Negative on error. + */ +int power_cppc_cpufreq_init(unsigned int lcore_id); + +/** + * Exit power management on a specific lcore. It will set the governor to which + * is before initialized. + * + * @param lcore_id + * lcore id. + * + * @return + * - 0 on success. + * - Negative on error. + */ +int power_cppc_cpufreq_exit(unsigned int lcore_id); + +/** + * Get the available frequencies of a specific lcore. The return value will be + * the minimal one of the total number of available frequencies and the number + * of buffer. The index of available frequencies used in other interfaces + * should be in the range of 0 to this return value. + * It should be protected outside of this function for threadsafe. + * + * @param lcore_id + * lcore id. + * @param freqs + * The buffer array to save the frequencies. + * @param num + * The number of frequencies to get. + * + * @return + * The number of available frequencies. + */ +uint32_t power_cppc_cpufreq_freqs(unsigned int lcore_id, uint32_t *freqs, + uint32_t num); + +/** + * Return the current index of available frequencies of a specific lcore. It + * will return 'RTE_POWER_INVALID_FREQ_INDEX = (~0)' if error. + * It should be protected outside of this function for threadsafe. + * + * @param lcore_id + * lcore id. + * + * @return + * The current index of available frequencies. + */ +uint32_t power_cppc_cpufreq_get_freq(unsigned int lcore_id); + +/** + * Set the new frequency for a specific lcore by indicating the index of + * available frequencies. + * It should be protected outside of this function for threadsafe. + * + * @param lcore_id + * lcore id. + * @param index + * The index of available frequencies. + * + * @return + * - 1 on success with frequency changed. + * - 0 on success without frequency changed. + * - Negative on error. + */ +int power_cppc_cpufreq_set_freq(unsigned int lcore_id, uint32_t index); + +/** + * Scale up the frequency of a specific lcore according to the available + * frequencies. + * It should be protected outside of this function for threadsafe. + * + * @param lcore_id + * lcore id. + * + * @return + * - 1 on success with frequency changed. + * - 0 on success without frequency changed. + * - Negative on error. + */ +int power_cppc_cpufreq_freq_up(unsigned int lcore_id); + +/** + * Scale down the frequency of a specific lcore according to the available + * frequencies. + * It should be protected outside of this function for threadsafe. + * + * @param lcore_id + * lcore id. + * + * @return + * - 1 on success with frequency changed. + * - 0 on success without frequency changed. + * - Negative on error. + */ +int power_cppc_cpufreq_freq_down(unsigned int lcore_id); + +/** + * Scale up the frequency of a specific lcore to the highest according to the + * available frequencies. + * It should be protected outside of this function for threadsafe. + * + * @param lcore_id + * lcore id. + * + * @return + * - 1 on success with frequency changed. + * - 0 on success without frequency changed. + * - Negative on error. + */ +int power_cppc_cpufreq_freq_max(unsigned int lcore_id); + +/** + * Scale down the frequency of a specific lcore to the lowest according to the + * available frequencies. + * It should be protected outside of this function for threadsafe. + * + * @param lcore_id + * lcore id. + * + * @return + * - 1 on success with frequency changed. + * - 0 on success without frequency changed. + * - Negative on error. + */ +int power_cppc_cpufreq_freq_min(unsigned int lcore_id); + +/** + * Get the turbo status of a specific lcore. + * It should be protected outside of this function for threadsafe. + * + * @param lcore_id + * lcore id. + * + * @return + * - 1 Turbo Boost is enabled on this lcore. + * - 0 Turbo Boost is disabled on this lcore. + * - Negative on error. + */ +int power_cppc_turbo_status(unsigned int lcore_id); + +/** + * Enable Turbo Boost on a specific lcore. + * It should be protected outside of this function for threadsafe. + * + * @param lcore_id + * lcore id. + * + * @return + * - 0 Turbo Boost is enabled successfully on this lcore. + * - Negative on error. + */ +int power_cppc_enable_turbo(unsigned int lcore_id); + +/** + * Disable Turbo Boost on a specific lcore. + * It should be protected outside of this function for threadsafe. + * + * @param lcore_id + * lcore id. + * + * @return + * - 0 Turbo Boost disabled successfully on this lcore. + * - Negative on error. + */ +int power_cppc_disable_turbo(unsigned int lcore_id); + +/** + * Returns power capabilities for a specific lcore. + * + * @param lcore_id + * lcore id. + * @param caps + * pointer to rte_power_core_capabilities object. + * + * @return + * - 0 on success. + * - Negative on error. + */ +int power_cppc_get_capabilities(unsigned int lcore_id, + struct rte_power_core_capabilities *caps); + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/lib/power/rte_power.c b/lib/power/rte_power.c index 98eaba915..3d51ff8be 100644 --- a/lib/power/rte_power.c +++ b/lib/power/rte_power.c @@ -10,6 +10,7 @@ #include "power_kvm_vm.h" #include "power_pstate_cpufreq.h" #include "power_common.h" +#include "power_cppc_cpufreq.h" enum power_management_env global_default_env = PM_ENV_NOT_SET; @@ -54,6 +55,8 @@ rte_power_check_env_supported(enum power_management_env env) return power_pstate_cpufreq_check_supported(); case PM_ENV_KVM_VM: return power_kvm_vm_check_supported(); + case PM_ENV_CPPC_CPUFREQ: + return power_cppc_cpufreq_check_supported(); default: rte_errno = EINVAL; return -1; @@ -110,6 +113,18 @@ rte_power_set_env(enum power_management_env env) rte_power_freq_disable_turbo = power_pstate_disable_turbo; rte_power_get_capabilities = power_pstate_get_capabilities; + } else if (env == PM_ENV_CPPC_CPUFREQ) { + rte_power_freqs = power_cppc_cpufreq_freqs; + rte_power_get_freq = power_cppc_cpufreq_get_freq; + rte_power_set_freq = power_cppc_cpufreq_set_freq; + rte_power_freq_up = power_cppc_cpufreq_freq_up; + rte_power_freq_down = power_cppc_cpufreq_freq_down; + rte_power_freq_min = power_cppc_cpufreq_freq_min; + rte_power_freq_max = power_cppc_cpufreq_freq_max; + rte_power_turbo_status = power_cppc_turbo_status; + rte_power_freq_enable_turbo = power_cppc_enable_turbo; + rte_power_freq_disable_turbo = power_cppc_disable_turbo; + rte_power_get_capabilities = power_cppc_get_capabilities; } else { RTE_LOG(ERR, POWER, "Invalid Power Management Environment(%d) set\n", env); @@ -153,6 +168,8 @@ rte_power_init(unsigned int lcore_id) return power_kvm_vm_init(lcore_id); case PM_ENV_PSTATE_CPUFREQ: return power_pstate_cpufreq_init(lcore_id); + case PM_ENV_CPPC_CPUFREQ: + return power_cppc_cpufreq_init(lcore_id); default: RTE_LOG(INFO, POWER, "Env isn't set yet!\n"); } @@ -172,6 +189,13 @@ rte_power_init(unsigned int lcore_id) goto out; } + RTE_LOG(INFO, POWER, "Attempting to initialise CPPC power management...\n"); + ret = power_cppc_cpufreq_init(lcore_id); + if (ret == 0) { + rte_power_set_env(PM_ENV_CPPC_CPUFREQ); + goto out; + } + RTE_LOG(INFO, POWER, "Attempting to initialise VM power management...\n"); ret = power_kvm_vm_init(lcore_id); if (ret == 0) { @@ -194,6 +218,8 @@ rte_power_exit(unsigned int lcore_id) return power_kvm_vm_exit(lcore_id); case PM_ENV_PSTATE_CPUFREQ: return power_pstate_cpufreq_exit(lcore_id); + case PM_ENV_CPPC_CPUFREQ: + return power_cppc_cpufreq_exit(lcore_id); default: RTE_LOG(ERR, POWER, "Environment has not been set, unable to exit gracefully\n"); diff --git a/lib/power/rte_power.h b/lib/power/rte_power.h index c8086bf6b..c5759afa3 100644 --- a/lib/power/rte_power.h +++ b/lib/power/rte_power.h @@ -22,7 +22,7 @@ extern "C" { /* Power Management Environment State */ enum power_management_env {PM_ENV_NOT_SET, PM_ENV_ACPI_CPUFREQ, PM_ENV_KVM_VM, - PM_ENV_PSTATE_CPUFREQ}; + PM_ENV_PSTATE_CPUFREQ, PM_ENV_CPPC_CPUFREQ}; /** * @warning