diff mbox series

[v2,2/4] common/mlx5: enable debug logs dynamically

Message ID 20210309094836.988763-3-thomas@monjalon.net (mailing list archive)
State Accepted, archived
Delegated to: Raslan Darawsheh
Headers show
Series adjust mlx debug logs | expand

Checks

Context Check Description
ci/checkpatch success coding style OK

Commit Message

Thomas Monjalon March 9, 2021, 9:48 a.m. UTC
Most debug logs are using DRV_LOG(DEBUG,)
but some were using DEBUG().
The macro DEBUG is doing nothing if not compiled with
RTE_LIBRTE_MLX5_DEBUG.

As it is not used in the data path, the macro DEBUG
can be replaced with DRV_LOG.
Then all debug logs can be enabled at runtime with:
	--log-level pmd.net.mlx5:debug

Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
---
 drivers/common/mlx5/mlx5_common.h    |  2 --
 drivers/common/mlx5/mlx5_common_mr.c | 45 +++++++++++++++-------------
 drivers/net/mlx5/linux/mlx5_verbs.c  | 13 ++++----
 drivers/net/mlx5/mlx5_mr.c           | 12 ++++----
 drivers/net/mlx5/mlx5_rxq.c          | 11 ++++---
 5 files changed, 44 insertions(+), 39 deletions(-)

Comments

Matan Azrad March 11, 2021, 8:04 p.m. UTC | #1
From: Thomas Monjalon
> Most debug logs are using DRV_LOG(DEBUG,) but some were using DEBUG().
> The macro DEBUG is doing nothing if not compiled with
> RTE_LIBRTE_MLX5_DEBUG.
> 
> As it is not used in the data path, the macro DEBUG can be replaced with
> DRV_LOG.
> Then all debug logs can be enabled at runtime with:
>         --log-level pmd.net.mlx5:debug
> 
> Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Matan Azrad <matan@nvidia.com>
Ferruh Yigit March 17, 2021, 5:39 p.m. UTC | #2
On 3/9/2021 9:48 AM, Thomas Monjalon wrote:
> Most debug logs are using DRV_LOG(DEBUG,)
> but some were using DEBUG().
> The macro DEBUG is doing nothing if not compiled with
> RTE_LIBRTE_MLX5_DEBUG.
> 
> As it is not used in the data path, the macro DEBUG
> can be replaced with DRV_LOG.
> Then all debug logs can be enabled at runtime with:
> 	--log-level pmd.net.mlx5:debug
> 
> Signed-off-by: Thomas Monjalon <thomas@monjalon.net>

Similar comment for the mlx4 one, copying here:

Why 'RTE_LIBRTE_MLX5_DEBUG' exists at first place?

It seems is is used both for data and control path, can you extend the patch for:
1- Remove #ifdef from control path
2- Replace with 'RTE_ETHDEV_DEBUG_RX' & 'RTE_ETHDEV_DEBUG_TX' for data path,
    please see: https://patches.dpdk.org/project/dpdk/list/?series=15738
3- Remove 'RTE_LIBRTE_MLX5_DEBUG' completely, if not removed document it in the
    driver documentation as supported config file


Both for 'mlx4' and 'mlx5', I will continue with existing patch, but can it be 
possible to make additional patches to address above issues?
Thomas Monjalon March 17, 2021, 5:48 p.m. UTC | #3
17/03/2021 18:39, Ferruh Yigit:
> On 3/9/2021 9:48 AM, Thomas Monjalon wrote:
> > Most debug logs are using DRV_LOG(DEBUG,)
> > but some were using DEBUG().
> > The macro DEBUG is doing nothing if not compiled with
> > RTE_LIBRTE_MLX5_DEBUG.
> > 
> > As it is not used in the data path, the macro DEBUG
> > can be replaced with DRV_LOG.
> > Then all debug logs can be enabled at runtime with:
> > 	--log-level pmd.net.mlx5:debug
> > 
> > Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
> 
> Similar comment for the mlx4 one, copying here:
> 
> Why 'RTE_LIBRTE_MLX5_DEBUG' exists at first place?
> 
> It seems is is used both for data and control path, can you extend the patch for:
> 1- Remove #ifdef from control path
> 2- Replace with 'RTE_ETHDEV_DEBUG_RX' & 'RTE_ETHDEV_DEBUG_TX' for data path,
>     please see: https://patches.dpdk.org/project/dpdk/list/?series=15738
> 3- Remove 'RTE_LIBRTE_MLX5_DEBUG' completely, if not removed document it in the
>     driver documentation as supported config file
> 
> Both for 'mlx4' and 'mlx5', I will continue with existing patch, but can it be 
> possible to make additional patches to address above issues?

Same answer as for mlx4 :)
To me using ETHDEV config macro in PMDs is new,
and I think it is out of scope for this patch.
But yes I agree it would be a nice improvement.
Matan, Slave, please could you do this change during next month?
Matan Azrad March 18, 2021, 10:13 a.m. UTC | #4
From: Thomas Monjalon
> 17/03/2021 18:39, Ferruh Yigit:
> > On 3/9/2021 9:48 AM, Thomas Monjalon wrote:
> > > Most debug logs are using DRV_LOG(DEBUG,) but some were using
> > > DEBUG().
> > > The macro DEBUG is doing nothing if not compiled with
> > > RTE_LIBRTE_MLX5_DEBUG.
> > >
> > > As it is not used in the data path, the macro DEBUG can be replaced
> > > with DRV_LOG.
> > > Then all debug logs can be enabled at runtime with:
> > >     --log-level pmd.net.mlx5:debug
> > >
> > > Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
> >
> > Similar comment for the mlx4 one, copying here:
> >
> > Why 'RTE_LIBRTE_MLX5_DEBUG' exists at first place?
> >
> > It seems is is used both for data and control path, can you extend the patch
> for:
> > 1- Remove #ifdef from control path
> > 2- Replace with 'RTE_ETHDEV_DEBUG_RX' & 'RTE_ETHDEV_DEBUG_TX' for
> data path,
> >     please see:
> > https://patches.dpdk.org/project/dpdk/list/?series=15738
> > 3- Remove 'RTE_LIBRTE_MLX5_DEBUG' completely, if not removed
> document it in the
> >     driver documentation as supported config file
> >
> > Both for 'mlx4' and 'mlx5', I will continue with existing patch, but
> > can it be possible to make additional patches to address above issues?
> 
> Same answer as for mlx4 :)
> To me using ETHDEV config macro in PMDs is new, and I think it is out of scope
> for this patch.
> But yes I agree it would be a nice improvement.
> Matan, Slave, please could you do this change during next month?

Yes, good suggestion, will add to our tasks.
Thanks Thomas\Ferruh.

Matan
diff mbox series

Patch

diff --git a/drivers/common/mlx5/mlx5_common.h b/drivers/common/mlx5/mlx5_common.h
index 3855582d0d..5028a05b49 100644
--- a/drivers/common/mlx5/mlx5_common.h
+++ b/drivers/common/mlx5/mlx5_common.h
@@ -92,14 +92,12 @@  pmd_drv_log_basename(const char *s)
 /* claim_zero() does not perform any check when debugging is disabled. */
 #ifdef RTE_LIBRTE_MLX5_DEBUG
 
-#define DEBUG(...) DRV_LOG(DEBUG, __VA_ARGS__)
 #define MLX5_ASSERT(exp) RTE_VERIFY(exp)
 #define claim_zero(...) MLX5_ASSERT((__VA_ARGS__) == 0)
 #define claim_nonzero(...) MLX5_ASSERT((__VA_ARGS__) != 0)
 
 #else /* RTE_LIBRTE_MLX5_DEBUG */
 
-#define DEBUG(...) (void)0
 #define MLX5_ASSERT(exp) RTE_ASSERT(exp)
 #define claim_zero(...) (__VA_ARGS__)
 #define claim_nonzero(...) (__VA_ARGS__)
diff --git a/drivers/common/mlx5/mlx5_common_mr.c b/drivers/common/mlx5/mlx5_common_mr.c
index 7c25541dc4..e1ed0caf3a 100644
--- a/drivers/common/mlx5/mlx5_common_mr.c
+++ b/drivers/common/mlx5/mlx5_common_mr.c
@@ -187,8 +187,9 @@  mlx5_mr_btree_init(struct mlx5_mr_btree *bt, int n, int socket)
 				0, socket);
 	if (bt->table == NULL) {
 		rte_errno = ENOMEM;
-		DEBUG("failed to allocate memory for btree cache on socket %d",
-		      socket);
+		DRV_LOG(DEBUG,
+			"failed to allocate memory for btree cache on socket "
+			"%d", socket);
 		return -rte_errno;
 	}
 	bt->size = n;
@@ -196,7 +197,7 @@  mlx5_mr_btree_init(struct mlx5_mr_btree *bt, int n, int socket)
 	(*bt->table)[bt->len++] = (struct mr_cache_entry) {
 		.lkey = UINT32_MAX,
 	};
-	DEBUG("initialized B-tree %p with table %p",
+	DRV_LOG(DEBUG, "initialized B-tree %p with table %p",
 	      (void *)bt, (void *)bt->table);
 	return 0;
 }
@@ -212,7 +213,7 @@  mlx5_mr_btree_free(struct mlx5_mr_btree *bt)
 {
 	if (bt == NULL)
 		return;
-	DEBUG("freeing B-tree %p with table %p",
+	DRV_LOG(DEBUG, "freeing B-tree %p with table %p",
 	      (void *)bt, (void *)bt->table);
 	mlx5_free(bt->table);
 	memset(bt, 0, sizeof(*bt));
@@ -237,7 +238,7 @@  mlx5_mr_btree_dump(struct mlx5_mr_btree *bt __rte_unused)
 	for (idx = 0; idx < bt->len; ++idx) {
 		struct mr_cache_entry *entry = &lkp_tbl[idx];
 
-		DEBUG("B-tree(%p)[%u],"
+		DRV_LOG(DEBUG, "B-tree(%p)[%u],"
 		      " [0x%" PRIxPTR ", 0x%" PRIxPTR ") lkey=0x%x",
 		      (void *)bt, idx, entry->start, entry->end, entry->lkey);
 	}
@@ -543,11 +544,11 @@  mlx5_mr_create_secondary(void *pd __rte_unused,
 {
 	int ret;
 
-	DEBUG("port %u requesting MR creation for address (%p)",
+	DRV_LOG(DEBUG, "port %u requesting MR creation for address (%p)",
 	      mp_id->port_id, (void *)addr);
 	ret = mlx5_mp_req_mr_create(mp_id, addr);
 	if (ret) {
-		DEBUG("Fail to request MR creation for address (%p)",
+		DRV_LOG(DEBUG, "Fail to request MR creation for address (%p)",
 		      (void *)addr);
 		return UINT32_MAX;
 	}
@@ -557,7 +558,7 @@  mlx5_mr_create_secondary(void *pd __rte_unused,
 	/* Lookup can't fail. */
 	MLX5_ASSERT(entry->lkey != UINT32_MAX);
 	rte_rwlock_read_unlock(&share_cache->rwlock);
-	DEBUG("MR CREATED by primary process for %p:\n"
+	DRV_LOG(DEBUG, "MR CREATED by primary process for %p:\n"
 	      "  [0x%" PRIxPTR ", 0x%" PRIxPTR "), lkey=0x%x",
 	      (void *)addr, entry->start, entry->end, entry->lkey);
 	return entry->lkey;
@@ -647,7 +648,7 @@  mlx5_mr_create_primary(void *pd,
 	MLX5_ASSERT(msl->page_sz == ms->hugepage_sz);
 	/* Number of memsegs in the range. */
 	ms_n = len / msl->page_sz;
-	DEBUG("Extending %p to [0x%" PRIxPTR ", 0x%" PRIxPTR "),"
+	DRV_LOG(DEBUG, "Extending %p to [0x%" PRIxPTR ", 0x%" PRIxPTR "),"
 	      " page_sz=0x%" PRIx64 ", ms_n=%u",
 	      (void *)addr, data.start, data.end, msl->page_sz, ms_n);
 	/* Size of memory for bitmap. */
@@ -656,7 +657,7 @@  mlx5_mr_create_primary(void *pd,
 			 RTE_ALIGN_CEIL(sizeof(*mr), RTE_CACHE_LINE_SIZE) +
 			 bmp_size, RTE_CACHE_LINE_SIZE, msl->socket_id);
 	if (mr == NULL) {
-		DEBUG("Unable to allocate memory for a new MR of"
+		DRV_LOG(DEBUG, "Unable to allocate memory for a new MR of"
 		      " address (%p).", (void *)addr);
 		rte_errno = ENOMEM;
 		goto err_nolock;
@@ -671,7 +672,7 @@  mlx5_mr_create_primary(void *pd,
 	bmp_mem = RTE_PTR_ALIGN_CEIL(mr + 1, RTE_CACHE_LINE_SIZE);
 	mr->ms_bmp = rte_bitmap_init(ms_n, bmp_mem, bmp_size);
 	if (mr->ms_bmp == NULL) {
-		DEBUG("Unable to initialize bitmap for a new MR of"
+		DRV_LOG(DEBUG, "Unable to initialize bitmap for a new MR of"
 		      " address (%p).", (void *)addr);
 		rte_errno = EINVAL;
 		goto err_nolock;
@@ -688,9 +689,9 @@  mlx5_mr_create_primary(void *pd,
 	data_re = data;
 	if (len > msl->page_sz &&
 	    !rte_memseg_contig_walk(mr_find_contig_memsegs_cb, &data_re)) {
-		DEBUG("Unable to find virtually contiguous"
-		      " chunk for address (%p)."
-		      " rte_memseg_contig_walk() failed.", (void *)addr);
+		DRV_LOG(DEBUG,
+			"Unable to find virtually contiguous chunk for address "
+			"(%p). rte_memseg_contig_walk() failed.", (void *)addr);
 		rte_errno = ENXIO;
 		goto err_memlock;
 	}
@@ -718,7 +719,8 @@  mlx5_mr_create_primary(void *pd,
 		 * here again.
 		 */
 		mr_btree_insert(&share_cache->cache, entry);
-		DEBUG("Found MR for %p on final lookup, abort", (void *)addr);
+		DRV_LOG(DEBUG, "Found MR for %p on final lookup, abort",
+			(void *)addr);
 		rte_rwlock_write_unlock(&share_cache->rwlock);
 		rte_mcfg_mem_read_unlock();
 		/*
@@ -767,7 +769,7 @@  mlx5_mr_create_primary(void *pd,
 	 */
 	share_cache->reg_mr_cb(pd, (void *)data.start, len, &mr->pmd_mr);
 	if (mr->pmd_mr.obj == NULL) {
-		DEBUG("Fail to create an MR for address (%p)",
+		DRV_LOG(DEBUG, "Fail to create an MR for address (%p)",
 		      (void *)addr);
 		rte_errno = EINVAL;
 		goto err_mrlock;
@@ -775,7 +777,7 @@  mlx5_mr_create_primary(void *pd,
 	MLX5_ASSERT((uintptr_t)mr->pmd_mr.addr == data.start);
 	MLX5_ASSERT(mr->pmd_mr.len);
 	LIST_INSERT_HEAD(&share_cache->mr_list, mr, mr);
-	DEBUG("MR CREATED (%p) for %p:\n"
+	DRV_LOG(DEBUG, "MR CREATED (%p) for %p:\n"
 	      "  [0x%" PRIxPTR ", 0x%" PRIxPTR "),"
 	      " lkey=0x%x base_idx=%u ms_n=%u, ms_bmp_n=%u",
 	      (void *)mr, (void *)addr, data.start, data.end,
@@ -1079,7 +1081,7 @@  mlx5_mr_dump_cache(struct mlx5_mr_share_cache *share_cache __rte_unused)
 	LIST_FOREACH(mr, &share_cache->mr_list, mr) {
 		unsigned int n;
 
-		DEBUG("MR[%u], LKey = 0x%x, ms_n = %u, ms_bmp_n = %u",
+		DRV_LOG(DEBUG, "MR[%u], LKey = 0x%x, ms_n = %u, ms_bmp_n = %u",
 		      mr_n++, rte_cpu_to_be_32(mr->pmd_mr.lkey),
 		      mr->ms_n, mr->ms_bmp_n);
 		if (mr->ms_n == 0)
@@ -1090,11 +1092,12 @@  mlx5_mr_dump_cache(struct mlx5_mr_share_cache *share_cache __rte_unused)
 			n = mr_find_next_chunk(mr, &ret, n);
 			if (!ret.end)
 				break;
-			DEBUG("  chunk[%u], [0x%" PRIxPTR ", 0x%" PRIxPTR ")",
-			      chunk_n++, ret.start, ret.end);
+			DRV_LOG(DEBUG,
+				"  chunk[%u], [0x%" PRIxPTR ", 0x%" PRIxPTR ")",
+				chunk_n++, ret.start, ret.end);
 		}
 	}
-	DEBUG("Dumping global cache %p", (void *)share_cache);
+	DRV_LOG(DEBUG, "Dumping global cache %p", (void *)share_cache);
 	mlx5_mr_btree_dump(&share_cache->cache);
 	rte_rwlock_read_unlock(&share_cache->rwlock);
 #endif
diff --git a/drivers/net/mlx5/linux/mlx5_verbs.c b/drivers/net/mlx5/linux/mlx5_verbs.c
index ade241b806..c7d4b177a0 100644
--- a/drivers/net/mlx5/linux/mlx5_verbs.c
+++ b/drivers/net/mlx5/linux/mlx5_verbs.c
@@ -721,7 +721,7 @@  mlx5_rxq_ibv_obj_drop_create(struct rte_eth_dev *dev)
 		return 0;
 	rxq = mlx5_malloc(MLX5_MEM_ZERO, sizeof(*rxq), 0, SOCKET_ID_ANY);
 	if (!rxq) {
-		DEBUG("Port %u cannot allocate drop Rx queue memory.",
+		DRV_LOG(DEBUG, "Port %u cannot allocate drop Rx queue memory.",
 		      dev->data->port_id);
 		rte_errno = ENOMEM;
 		return -rte_errno;
@@ -729,7 +729,7 @@  mlx5_rxq_ibv_obj_drop_create(struct rte_eth_dev *dev)
 	priv->drop_queue.rxq = rxq;
 	rxq->ibv_cq = mlx5_glue->create_cq(ctx, 1, NULL, NULL, 0);
 	if (!rxq->ibv_cq) {
-		DEBUG("Port %u cannot allocate CQ for drop queue.",
+		DRV_LOG(DEBUG, "Port %u cannot allocate CQ for drop queue.",
 		      dev->data->port_id);
 		rte_errno = errno;
 		goto error;
@@ -742,7 +742,7 @@  mlx5_rxq_ibv_obj_drop_create(struct rte_eth_dev *dev)
 						    .cq = rxq->ibv_cq,
 					      });
 	if (!rxq->wq) {
-		DEBUG("Port %u cannot allocate WQ for drop queue.",
+		DRV_LOG(DEBUG, "Port %u cannot allocate WQ for drop queue.",
 		      dev->data->port_id);
 		rte_errno = errno;
 		goto error;
@@ -785,8 +785,9 @@  mlx5_ibv_drop_action_create(struct rte_eth_dev *dev)
 					.comp_mask = 0,
 				 });
 	if (!ind_tbl) {
-		DEBUG("Port %u cannot allocate indirection table for drop"
-		      " queue.", dev->data->port_id);
+		DRV_LOG(DEBUG, "Port %u"
+			" cannot allocate indirection table for drop queue.",
+			dev->data->port_id);
 		rte_errno = errno;
 		goto error;
 	}
@@ -806,7 +807,7 @@  mlx5_ibv_drop_action_create(struct rte_eth_dev *dev)
 			.pd = priv->sh->pd
 		 });
 	if (!hrxq->qp) {
-		DEBUG("Port %u cannot allocate QP for drop queue.",
+		DRV_LOG(DEBUG, "Port %u cannot allocate QP for drop queue.",
 		      dev->data->port_id);
 		rte_errno = errno;
 		goto error;
diff --git a/drivers/net/mlx5/mlx5_mr.c b/drivers/net/mlx5/mlx5_mr.c
index da4e91fc24..3255393ca2 100644
--- a/drivers/net/mlx5/mlx5_mr.c
+++ b/drivers/net/mlx5/mlx5_mr.c
@@ -57,7 +57,7 @@  mlx5_mr_mem_event_free_cb(struct mlx5_dev_ctx_shared *sh,
 	int i;
 	int rebuild = 0;
 
-	DEBUG("device %s free callback: addr=%p, len=%zu",
+	DRV_LOG(DEBUG, "device %s free callback: addr=%p, len=%zu",
 	      sh->ibdev_name, addr, len);
 	msl = rte_mem_virt2memseg_list(addr);
 	/* addr and len must be page-aligned. */
@@ -87,13 +87,13 @@  mlx5_mr_mem_event_free_cb(struct mlx5_dev_ctx_shared *sh,
 		pos = ms_idx - mr->ms_base_idx;
 		MLX5_ASSERT(rte_bitmap_get(mr->ms_bmp, pos));
 		MLX5_ASSERT(pos < mr->ms_bmp_n);
-		DEBUG("device %s MR(%p): clear bitmap[%u] for addr %p",
+		DRV_LOG(DEBUG, "device %s MR(%p): clear bitmap[%u] for addr %p",
 		      sh->ibdev_name, (void *)mr, pos, (void *)start);
 		rte_bitmap_clear(mr->ms_bmp, pos);
 		if (--mr->ms_n == 0) {
 			LIST_REMOVE(mr, mr);
 			LIST_INSERT_HEAD(&sh->share_cache.mr_free_list, mr, mr);
-			DEBUG("device %s remove MR(%p) from list",
+			DRV_LOG(DEBUG, "device %s remove MR(%p) from list",
 			      sh->ibdev_name, (void *)mr);
 		}
 		/*
@@ -114,7 +114,7 @@  mlx5_mr_mem_event_free_cb(struct mlx5_dev_ctx_shared *sh,
 		 * before the core sees the newly allocated memory.
 		 */
 		++sh->share_cache.dev_gen;
-		DEBUG("broadcasting local cache flush, gen=%d",
+		DRV_LOG(DEBUG, "broadcasting local cache flush, gen=%d",
 		      sh->share_cache.dev_gen);
 		rte_smp_wmb();
 	}
@@ -405,7 +405,7 @@  mlx5_dma_unmap(struct rte_pci_device *pdev, void *addr,
 	}
 	LIST_REMOVE(mr, mr);
 	mlx5_mr_free(mr, sh->share_cache.dereg_mr_cb);
-	DEBUG("port %u remove MR(%p) from list", dev->data->port_id,
+	DRV_LOG(DEBUG, "port %u remove MR(%p) from list", dev->data->port_id,
 	      (void *)mr);
 	mlx5_mr_rebuild_cache(&sh->share_cache);
 	/*
@@ -418,7 +418,7 @@  mlx5_dma_unmap(struct rte_pci_device *pdev, void *addr,
 	 * before the core sees the newly allocated memory.
 	 */
 	++sh->share_cache.dev_gen;
-	DEBUG("broadcasting local cache flush, gen=%d",
+	DRV_LOG(DEBUG, "broadcasting local cache flush, gen=%d",
 	      sh->share_cache.dev_gen);
 	rte_smp_wmb();
 	rte_rwlock_read_unlock(&sh->share_cache.rwlock);
diff --git a/drivers/net/mlx5/mlx5_rxq.c b/drivers/net/mlx5/mlx5_rxq.c
index 8f9ee97f7a..9009eb8d18 100644
--- a/drivers/net/mlx5/mlx5_rxq.c
+++ b/drivers/net/mlx5/mlx5_rxq.c
@@ -1972,7 +1972,8 @@  mlx5_ind_table_obj_setup(struct rte_eth_dev *dev,
 	for (j = 0; j < i; j++)
 		mlx5_rxq_release(dev, ind_tbl->queues[j]);
 	rte_errno = err;
-	DEBUG("Port %u cannot setup indirection table.", dev->data->port_id);
+	DRV_LOG(DEBUG, "Port %u cannot setup indirection table.",
+		dev->data->port_id);
 	return ret;
 }
 
@@ -2056,8 +2057,9 @@  mlx5_ind_table_obj_modify(struct rte_eth_dev *dev,
 		 * reference unsupported. Intended for standalone indirection
 		 * tables only.
 		 */
-		DEBUG("Port %u cannot modify indirection table (refcnt> 1).",
-		      dev->data->port_id);
+		DRV_LOG(DEBUG,
+			"Port %u cannot modify indirection table (refcnt> 1).",
+			dev->data->port_id);
 		rte_errno = EINVAL;
 		return -rte_errno;
 	}
@@ -2081,7 +2083,8 @@  mlx5_ind_table_obj_modify(struct rte_eth_dev *dev,
 	for (j = 0; j < i; j++)
 		mlx5_rxq_release(dev, ind_tbl->queues[j]);
 	rte_errno = err;
-	DEBUG("Port %u cannot setup indirection table.", dev->data->port_id);
+	DRV_LOG(DEBUG, "Port %u cannot setup indirection table.",
+		dev->data->port_id);
 	return ret;
 }