[v1,04/38] net/mvpp2: skip vlan flush
Checks
Commit Message
From: Liron Himi <lironh@marvell.com>
vlan-flush in MUSDK is not supported yet.
until it does, the code should be skipped as currently
an redundant error message is displayed.
Fixes: a8f3d6783 ("net/mrvl: support VLAN filtering")
Cc: stable@dpdk.org
Signed-off-by: Liron Himi <lironh@marvell.com>
Reviewed-by: Liron Himi <lironh@marvell.com>
---
drivers/net/mvpp2/mrvl_ethdev.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
Comments
Reviewed-by: Michael Shamis <michaelsh@marvell.com>
-----Original Message-----
From: dev <dev-bounces@dpdk.org> On Behalf Of lironh@marvell.com
Sent: Wednesday, December 2, 2020 12:12 PM
To: Jerin Jacob Kollanukkaran <jerinj@marvell.com>
Cc: dev@dpdk.org; Liron Himi <lironh@marvell.com>; stable@dpdk.org
Subject: [dpdk-dev] [PATCH v1 04/38] net/mvpp2: skip vlan flush
From: Liron Himi <lironh@marvell.com>
vlan-flush in MUSDK is not supported yet.
until it does, the code should be skipped as currently an redundant error message is displayed.
Fixes: a8f3d6783 ("net/mrvl: support VLAN filtering")
Cc: stable@dpdk.org
Signed-off-by: Liron Himi <lironh@marvell.com>
Reviewed-by: Liron Himi <lironh@marvell.com>
---
drivers/net/mvpp2/mrvl_ethdev.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/net/mvpp2/mrvl_ethdev.c b/drivers/net/mvpp2/mrvl_ethdev.c index ebd2bb1c8..0985ccebe 100644
--- a/drivers/net/mvpp2/mrvl_ethdev.c
+++ b/drivers/net/mvpp2/mrvl_ethdev.c
@@ -672,15 +672,15 @@ mrvl_dev_start(struct rte_eth_dev *dev)
}
if (!priv->vlan_flushed) {
- ret = pp2_ppio_flush_vlan(priv->ppio);
- if (ret) {
- MRVL_LOG(ERR, "Failed to flush vlan list");
- /*
- * TODO
- * once pp2_ppio_flush_vlan() is supported jump to out
- * goto out;
- */
- }
+ /*
+ * TODO
+ * once pp2_ppio_flush_vlan() is supported call it
+ * ret = pp2_ppio_flush_vlan(priv->ppio);
+ * if (ret) {
+ * MRVL_LOG(ERR, "Failed to flush vlan list");
+ * goto out;
+ * }
+ */
priv->vlan_flushed = 1;
}
ret = mrvl_mtu_set(dev, dev->data->mtu);
--
2.28.0
On Wed, Dec 23, 2020 at 3:15 PM Michael Shamis <michaelsh@marvell.com> wrote:
>
> Reviewed-by: Michael Shamis <michaelsh@marvell.com>
>
> -----Original Message-----
> From: dev <dev-bounces@dpdk.org> On Behalf Of lironh@marvell.com
> Sent: Wednesday, December 2, 2020 12:12 PM
> To: Jerin Jacob Kollanukkaran <jerinj@marvell.com>
> Cc: dev@dpdk.org; Liron Himi <lironh@marvell.com>; stable@dpdk.org
> Subject: [dpdk-dev] [PATCH v1 04/38] net/mvpp2: skip vlan flush
>
> From: Liron Himi <lironh@marvell.com>
>
> vlan-flush in MUSDK is not supported yet.
> until it does, the code should be skipped as currently an redundant error message is displayed.
>
> Fixes: a8f3d6783 ("net/mrvl: support VLAN filtering")
> Cc: stable@dpdk.org
>
> Signed-off-by: Liron Himi <lironh@marvell.com>
> Reviewed-by: Liron Himi <lironh@marvell.com>
> ---
> drivers/net/mvpp2/mrvl_ethdev.c | 18 +++++++++---------
> 1 file changed, 9 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/net/mvpp2/mrvl_ethdev.c b/drivers/net/mvpp2/mrvl_ethdev.c index ebd2bb1c8..0985ccebe 100644
> --- a/drivers/net/mvpp2/mrvl_ethdev.c
> +++ b/drivers/net/mvpp2/mrvl_ethdev.c
> @@ -672,15 +672,15 @@ mrvl_dev_start(struct rte_eth_dev *dev)
> }
>
> if (!priv->vlan_flushed) {
> - ret = pp2_ppio_flush_vlan(priv->ppio);
> - if (ret) {
> - MRVL_LOG(ERR, "Failed to flush vlan list");
> - /*
> - * TODO
> - * once pp2_ppio_flush_vlan() is supported jump to out
> - * goto out;
> - */
> - }
> + /*
> + * TODO
> + * once pp2_ppio_flush_vlan() is supported call it
> + * ret = pp2_ppio_flush_vlan(priv->ppio);
> + * if (ret) {
> + * MRVL_LOG(ERR, "Failed to flush vlan list");
> + * goto out;
> + * }
> + */
This kind of TODO is no go in upstream code.
I think, MUSDK can be updated to skip the error and have an API detect
the feature
is present or not? so that drivers can make intelligent decisions and
have clean code.
> priv->vlan_flushed = 1;
> }
> ret = mrvl_mtu_set(dev, dev->data->mtu);
> --
> 2.28.0
>
@@ -672,15 +672,15 @@ mrvl_dev_start(struct rte_eth_dev *dev)
}
if (!priv->vlan_flushed) {
- ret = pp2_ppio_flush_vlan(priv->ppio);
- if (ret) {
- MRVL_LOG(ERR, "Failed to flush vlan list");
- /*
- * TODO
- * once pp2_ppio_flush_vlan() is supported jump to out
- * goto out;
- */
- }
+ /*
+ * TODO
+ * once pp2_ppio_flush_vlan() is supported call it
+ * ret = pp2_ppio_flush_vlan(priv->ppio);
+ * if (ret) {
+ * MRVL_LOG(ERR, "Failed to flush vlan list");
+ * goto out;
+ * }
+ */
priv->vlan_flushed = 1;
}
ret = mrvl_mtu_set(dev, dev->data->mtu);