[3/3,v4] app/testpmd: support hardware offload to drop error packets
Checks
Commit Message
From: Nipun Gupta <nipun.gupta@nxp.com>
With DEV_RX_OFFLOAD_ERR_PKT_DROP now defined as an offload
capability, and separate RTE_DEV_RX_ERR_PKT_DROP_OFFLOAD_ALL
capability to drop all error packets in hardware, testpmd
showcases this with a new added configuration option
'enable-hw-drop-err-all'.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
---
app/test-pmd/config.c | 35 +++++++++++++++++++++
app/test-pmd/parameters.c | 7 +++++
app/test-pmd/testpmd.c | 8 +++++
app/test-pmd/testpmd.h | 1 +
doc/guides/nics/features.rst | 44 +++++++++++++++++++++++++++
doc/guides/testpmd_app_ug/run_app.rst | 4 +++
6 files changed, 99 insertions(+)
Comments
Hi Nipun,
Some nits. Looks good otherwise.
> On Oct 15, 2020, at 8:23 AM, Nipun.gupta@nxp.com <nipun.gupta@nxp.com> wrote:
>
> From: Nipun Gupta <nipun.gupta@nxp.com>
>
> With DEV_RX_OFFLOAD_ERR_PKT_DROP now defined as an offload
> capability, and separate RTE_DEV_RX_ERR_PKT_DROP_OFFLOAD_ALL
> capability to drop all error packets in hardware, testpmd
> showcases this with a new added configuration option
> 'enable-hw-drop-err-all'.
>
> Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
> ---
> app/test-pmd/config.c | 35 +++++++++++++++++++++
> app/test-pmd/parameters.c | 7 +++++
> app/test-pmd/testpmd.c | 8 +++++
> app/test-pmd/testpmd.h | 1 +
> doc/guides/nics/features.rst | 44 +++++++++++++++++++++++++++
> doc/guides/testpmd_app_ug/run_app.rst | 4 +++
> 6 files changed, 99 insertions(+)
>
> diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
> index e73dc66c8..14ef4e468 100644
> --- a/app/test-pmd/config.c
> +++ b/app/test-pmd/config.c
> @@ -1027,6 +1027,41 @@ port_offload_cap_display(portid_t port_id)
> printf("off\n");
> }
>
> + if (dev_info.rx_offload_capa & DEV_RX_OFFLOAD_ERR_PKT_DROP) {
> + if (dev_info.rx_err_drop_offload_capa &
> + RTE_DEV_RX_ERR_PKT_DROP_OFFLOAD_L1_FCS) {
> + printf("RX L1 FCS Error pkt drop: ");
> + if (ports[port_id].dev_conf.err_pkt_drop_conf.l1_fcs)
> + printf("on\n");
> + else
> + printf("off\n");
> + }
> + if (dev_info.rx_err_drop_offload_capa &
> + RTE_DEV_RX_ERR_PKT_DROP_OFFLOAD_L3_CSUM) {
> + printf("RX L3 Csum Error pkt drop: ");
> + if (ports[port_id].dev_conf.err_pkt_drop_conf.l3_csum)
> + printf("on\n");
> + else
> + printf("off\n");
> + }
> + if (dev_info.rx_err_drop_offload_capa &
> + RTE_DEV_RX_ERR_PKT_DROP_OFFLOAD_L4_CSUM) {
> + printf("RX L4 Csum Error pkt drop: ");
> + if (ports[port_id].dev_conf.err_pkt_drop_conf.l4_csum)
> + printf("on\n");
> + else
> + printf("off\n");
> + }
> + if (dev_info.rx_err_drop_offload_capa &
> + RTE_DEV_RX_ERR_PKT_DROP_OFFLOAD_ALL) {
> + printf("RX all Error pkt drop: ");
> + if (ports[port_id].dev_conf.err_pkt_drop_conf.all)
> + printf("on\n");
> + else
> + printf("off\n");
> + }
> + }
> +
> if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_VLAN_INSERT) {
> printf("VLAN insert: ");
> if (ports[port_id].dev_conf.txmode.offloads &
> diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c
> index 1ead59579..508612426 100644
> --- a/app/test-pmd/parameters.c
> +++ b/app/test-pmd/parameters.c
> @@ -142,6 +142,7 @@ usage(char* progname)
> printf(" --enable-hw-vlan-strip: enable hardware vlan strip.\n");
> printf(" --enable-hw-vlan-extend: enable hardware vlan extend.\n");
> printf(" --enable-hw-qinq-strip: enable hardware qinq strip.\n");
> + printf(" --enable-hw-drop-err-all: enable hardware packet drop for all error packets.\n");
> printf(" --enable-drop-en: enable per queue packet drop.\n");
> printf(" --disable-rss: disable rss.\n");
> printf(" --port-topology=<paired|chained|loop>: set port topology (paired "
> @@ -631,6 +632,7 @@ launch_args_parse(int argc, char** argv)
> { "enable-hw-vlan-strip", 0, 0, 0 },
> { "enable-hw-vlan-extend", 0, 0, 0 },
> { "enable-hw-qinq-strip", 0, 0, 0 },
> + { "enable-hw-drop-err-all", 0, 0, 0 },
> { "enable-drop-en", 0, 0, 0 },
> { "disable-rss", 0, 0, 0 },
> { "port-topology", 1, 0, 0 },
> @@ -1283,6 +1285,11 @@ launch_args_parse(int argc, char** argv)
> rmv_interrupt = 0;
> if (!strcmp(lgopts[opt_idx].name, "flow-isolate-all"))
> flow_isolate_all = 1;
> + if (!strcmp(lgopts[opt_idx].name,
> + "enable-hw-drop-err-all")) {
> + rx_err_pkt_drop_all = 1;
> + }
{ } can be removed.
> +
> if (!strcmp(lgopts[opt_idx].name, "tx-offloads")) {
> char *end = NULL;
> n = strtoull(optarg, &end, 16);
> diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
> index ccba71c07..c9e7397e6 100644
> --- a/app/test-pmd/testpmd.c
> +++ b/app/test-pmd/testpmd.c
> @@ -359,6 +359,11 @@ uint8_t lsc_interrupt = 1; /* enabled by default */
> */
> uint8_t rmv_interrupt = 1; /* enabled by default */
>
> +/*
> + * Drop all RX error packets on HW itself.
> + */
> +uint8_t rx_err_pkt_drop_all = 0; /* disabled by default */
= 0 can be removed.
> +
> uint8_t hot_plug = 0; /**< hotplug disabled by default. */
>
> /* After attach, port setup is called on event or by iterator */
> @@ -3359,6 +3364,9 @@ init_port_config(void)
> (rte_eth_devices[pid].data->dev_flags &
> RTE_ETH_DEV_INTR_RMV))
> port->dev_conf.intr_conf.rmv = 1;
> +
> + if (rx_err_pkt_drop_all)
> + port->dev_conf.err_pkt_drop_conf.all = 1;
> }
> }
>
> diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
> index c7e7e41a9..eab154ed4 100644
> --- a/app/test-pmd/testpmd.h
> +++ b/app/test-pmd/testpmd.h
> @@ -314,6 +314,7 @@ extern uint8_t no_device_start; /**<set by "--disable-device-start" parameter */
> extern volatile int test_done; /* stop packet forwarding when set to 1. */
> extern uint8_t lsc_interrupt; /**< disabled by "--no-lsc-interrupt" parameter */
> extern uint8_t rmv_interrupt; /**< disabled by "--no-rmv-interrupt" parameter */
> +extern uint8_t rx_err_pkt_drop_all; /**< enabled by "--enable-hw-drop-err-all" parameter */
> extern uint32_t event_print_mask;
> /**< set by "--print-event xxxx" and "--mask-event xxxx parameters */
> extern bool setup_on_probe_event; /**< disabled by port setup-on iterator */
> diff --git a/doc/guides/nics/features.rst b/doc/guides/nics/features.rst
> index dd8c9555b..cb7fdfd8b 100644
> --- a/doc/guides/nics/features.rst
> +++ b/doc/guides/nics/features.rst
> @@ -606,6 +606,50 @@ Supports inner packet L4 checksum.
> ``tx_offload_capa,tx_queue_offload_capa:DEV_TX_OFFLOAD_OUTER_UDP_CKSUM``.
>
>
> +.. _nic_features_l1_fcs_rx_error_packet_drop:
> +
> +L1 FCS Error Packet drop on Rx
> +------------------------------
> +
> +Supports dropping of packets having L1 FCS error on Rx.
> +
> +* **[uses] user config**: ``dev_conf.err_pkt_drop_conf.l1_fcs``.
> +* **[provides] rte_eth_dev_info**: ``rx_err_drop_offload_capa:RTE_DEV_RX_ERR_PKT_DROP_OFFLOAD_L1_FCS``.
> +
> +
> +.. _nic_features_l3_csum_rx_error_packet_drop:
> +
> +L3 checksum Error Packet drop on Rx
> +-----------------------------------
> +
> +Supports dropping of packets having L3 Checksum error on Rx.
> +
> +* **[uses] user config**: ``dev_conf.err_pkt_drop_conf.l3_csum``.
> +* **[provides] rte_eth_dev_info**: ``rx_err_drop_offload_capa:RTE_DEV_RX_ERR_PKT_DROP_OFFLOAD_L3_CSUM``.
> +
> +
> +.. _nic_features_l4_csum_rx_error_packet_drop:
> +
> +L4 Checksum Error Packet drop on Rx
> +-----------------------------------
> +
> +Supports dropping of packets having L1 FCS error on Rx.
> +
> +* **[uses] user config**: ``dev_conf.err_pkt_drop_conf.l4_csum``.
> +* **[provides] rte_eth_dev_info**: ``rx_err_drop_offload_capa:RTE_DEV_RX_ERR_PKT_DROP_OFFLOAD_L4_CSUM``.
> +
> +
> +.. _nic_features_all_rx_error_packet_drop:
> +
> +All/any Error Packet drop on Rx
> +-------------------------------
> +
> +Supports dropping of packets having any of the errors like L1 FSC, L3/L4 Checksum on Rx.
s/FSC/FCS
> +
> +* **[uses] user config**: ``dev_conf.err_pkt_drop_conf.all``.
> +* **[provides] rte_eth_dev_info**: ``rx_err_drop_offload_capa:RTE_DEV_RX_ERR_PKT_DROP_OFFLOAD_ALL``.
> +
> +
> .. _nic_features_packet_type_parsing:
>
> Packet type parsing
> diff --git a/doc/guides/testpmd_app_ug/run_app.rst b/doc/guides/testpmd_app_ug/run_app.rst
> index e2539f693..20f2f8083 100644
> --- a/doc/guides/testpmd_app_ug/run_app.rst
> +++ b/doc/guides/testpmd_app_ug/run_app.rst
> @@ -213,6 +213,10 @@ The command line options are:
>
> Enable hardware QINQ strip.
>
> +* ``--enable-hw-drop-err-all``
> +
> + Enable hardware packet drop for any error packets
> +
> * ``--enable-drop-en``
>
> Enable per-queue packet drop for packets with no descriptors.
> —
> 2.17.1
>
Reviewed-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
> -----Original Message-----
> From: Dharmik Thakkar <Dharmik.Thakkar@arm.com>
> Sent: Thursday, October 29, 2020 10:52 PM
> To: Nipun Gupta <nipun.gupta@nxp.com>
> Cc: dev <dev@dpdk.org>; thomas@monjalon.net; Ferruh Yigit
> <ferruh.yigit@intel.com>; arybchenko@solarflare.com; Hemant Agrawal
> <hemant.agrawal@nxp.com>; Sachin Saxena <sachin.saxena@nxp.com>; Rohit
> Raj <rohit.raj@nxp.com>; Jerin Jacob <jerinjacobk@gmail.com>; Stephen
> Hemminger <stephen@networkplumber.org>; asafp@nvidia.com; nd
> <nd@arm.com>
> Subject: Re: [dpdk-dev] [PATCH 3/3 v4] app/testpmd: support hardware offload
> to drop error packets
>
> Hi Nipun,
>
> Some nits. Looks good otherwise.
>
> > On Oct 15, 2020, at 8:23 AM, Nipun.gupta@nxp.com <nipun.gupta@nxp.com>
> wrote:
> >
> > From: Nipun Gupta <nipun.gupta@nxp.com>
> >
> > With DEV_RX_OFFLOAD_ERR_PKT_DROP now defined as an offload
> > capability, and separate RTE_DEV_RX_ERR_PKT_DROP_OFFLOAD_ALL
> > capability to drop all error packets in hardware, testpmd
> > showcases this with a new added configuration option
> > 'enable-hw-drop-err-all'.
> >
> > Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
> > ---
> > app/test-pmd/config.c | 35 +++++++++++++++++++++
> > app/test-pmd/parameters.c | 7 +++++
> > app/test-pmd/testpmd.c | 8 +++++
> > app/test-pmd/testpmd.h | 1 +
> > doc/guides/nics/features.rst | 44 +++++++++++++++++++++++++++
> > doc/guides/testpmd_app_ug/run_app.rst | 4 +++
> > 6 files changed, 99 insertions(+)
> >
> > diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
> > index e73dc66c8..14ef4e468 100644
> > --- a/app/test-pmd/config.c
> > +++ b/app/test-pmd/config.c
> > @@ -1027,6 +1027,41 @@ port_offload_cap_display(portid_t port_id)
> > printf("off\n");
> > }
> >
> > + if (dev_info.rx_offload_capa & DEV_RX_OFFLOAD_ERR_PKT_DROP) {
> > + if (dev_info.rx_err_drop_offload_capa &
> > + RTE_DEV_RX_ERR_PKT_DROP_OFFLOAD_L1_FCS) {
> > + printf("RX L1 FCS Error pkt drop: ");
> > + if (ports[port_id].dev_conf.err_pkt_drop_conf.l1_fcs)
> > + printf("on\n");
> > + else
> > + printf("off\n");
> > + }
> > + if (dev_info.rx_err_drop_offload_capa &
> > + RTE_DEV_RX_ERR_PKT_DROP_OFFLOAD_L3_CSUM) {
> > + printf("RX L3 Csum Error pkt drop: ");
> > + if (ports[port_id].dev_conf.err_pkt_drop_conf.l3_csum)
> > + printf("on\n");
> > + else
> > + printf("off\n");
> > + }
> > + if (dev_info.rx_err_drop_offload_capa &
> > + RTE_DEV_RX_ERR_PKT_DROP_OFFLOAD_L4_CSUM) {
> > + printf("RX L4 Csum Error pkt drop: ");
> > + if (ports[port_id].dev_conf.err_pkt_drop_conf.l4_csum)
> > + printf("on\n");
> > + else
> > + printf("off\n");
> > + }
> > + if (dev_info.rx_err_drop_offload_capa &
> > + RTE_DEV_RX_ERR_PKT_DROP_OFFLOAD_ALL) {
> > + printf("RX all Error pkt drop: ");
> > + if (ports[port_id].dev_conf.err_pkt_drop_conf.all)
> > + printf("on\n");
> > + else
> > + printf("off\n");
> > + }
> > + }
> > +
> > if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_VLAN_INSERT) {
> > printf("VLAN insert: ");
> > if (ports[port_id].dev_conf.txmode.offloads &
> > diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c
> > index 1ead59579..508612426 100644
> > --- a/app/test-pmd/parameters.c
> > +++ b/app/test-pmd/parameters.c
> > @@ -142,6 +142,7 @@ usage(char* progname)
> > printf(" --enable-hw-vlan-strip: enable hardware vlan strip.\n");
> > printf(" --enable-hw-vlan-extend: enable hardware vlan extend.\n");
> > printf(" --enable-hw-qinq-strip: enable hardware qinq strip.\n");
> > + printf(" --enable-hw-drop-err-all: enable hardware packet drop for all
> error packets.\n");
> > printf(" --enable-drop-en: enable per queue packet drop.\n");
> > printf(" --disable-rss: disable rss.\n");
> > printf(" --port-topology=<paired|chained|loop>: set port topology
> (paired "
> > @@ -631,6 +632,7 @@ launch_args_parse(int argc, char** argv)
> > { "enable-hw-vlan-strip", 0, 0, 0 },
> > { "enable-hw-vlan-extend", 0, 0, 0 },
> > { "enable-hw-qinq-strip", 0, 0, 0 },
> > + { "enable-hw-drop-err-all", 0, 0, 0 },
> > { "enable-drop-en", 0, 0, 0 },
> > { "disable-rss", 0, 0, 0 },
> > { "port-topology", 1, 0, 0 },
> > @@ -1283,6 +1285,11 @@ launch_args_parse(int argc, char** argv)
> > rmv_interrupt = 0;
> > if (!strcmp(lgopts[opt_idx].name, "flow-isolate-all"))
> > flow_isolate_all = 1;
> > + if (!strcmp(lgopts[opt_idx].name,
> > + "enable-hw-drop-err-all")) {
> > + rx_err_pkt_drop_all = 1;
> > + }
>
> { } can be removed.
Agree.
>
> > +
> > if (!strcmp(lgopts[opt_idx].name, "tx-offloads")) {
> > char *end = NULL;
> > n = strtoull(optarg, &end, 16);
> > diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
> > index ccba71c07..c9e7397e6 100644
> > --- a/app/test-pmd/testpmd.c
> > +++ b/app/test-pmd/testpmd.c
> > @@ -359,6 +359,11 @@ uint8_t lsc_interrupt = 1; /* enabled by default */
> > */
> > uint8_t rmv_interrupt = 1; /* enabled by default */
> >
> > +/*
> > + * Drop all RX error packets on HW itself.
> > + */
> > +uint8_t rx_err_pkt_drop_all = 0; /* disabled by default */
>
> = 0 can be removed.
This is on all the other default disabled parameters too probably to show that they
are disabled by default. So I would prefer to keep it like this.
>
> > +
> > uint8_t hot_plug = 0; /**< hotplug disabled by default. */
> >
> > /* After attach, port setup is called on event or by iterator */
> > @@ -3359,6 +3364,9 @@ init_port_config(void)
> > (rte_eth_devices[pid].data->dev_flags &
> > RTE_ETH_DEV_INTR_RMV))
> > port->dev_conf.intr_conf.rmv = 1;
> > +
> > + if (rx_err_pkt_drop_all)
> > + port->dev_conf.err_pkt_drop_conf.all = 1;
> > }
> > }
> >
> > diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
> > index c7e7e41a9..eab154ed4 100644
> > --- a/app/test-pmd/testpmd.h
> > +++ b/app/test-pmd/testpmd.h
> > @@ -314,6 +314,7 @@ extern uint8_t no_device_start; /**<set by "--disable-
> device-start" parameter */
> > extern volatile int test_done; /* stop packet forwarding when set to 1. */
> > extern uint8_t lsc_interrupt; /**< disabled by "--no-lsc-interrupt" parameter */
> > extern uint8_t rmv_interrupt; /**< disabled by "--no-rmv-interrupt" parameter
> */
> > +extern uint8_t rx_err_pkt_drop_all; /**< enabled by "--enable-hw-drop-err-
> all" parameter */
> > extern uint32_t event_print_mask;
> > /**< set by "--print-event xxxx" and "--mask-event xxxx parameters */
> > extern bool setup_on_probe_event; /**< disabled by port setup-on iterator */
> > diff --git a/doc/guides/nics/features.rst b/doc/guides/nics/features.rst
> > index dd8c9555b..cb7fdfd8b 100644
> > --- a/doc/guides/nics/features.rst
> > +++ b/doc/guides/nics/features.rst
> > @@ -606,6 +606,50 @@ Supports inner packet L4 checksum.
> >
> ``tx_offload_capa,tx_queue_offload_capa:DEV_TX_OFFLOAD_OUTER_UDP_CK
> SUM``.
> >
> >
> > +.. _nic_features_l1_fcs_rx_error_packet_drop:
> > +
> > +L1 FCS Error Packet drop on Rx
> > +------------------------------
> > +
> > +Supports dropping of packets having L1 FCS error on Rx.
> > +
> > +* **[uses] user config**: ``dev_conf.err_pkt_drop_conf.l1_fcs``.
> > +* **[provides] rte_eth_dev_info**:
> ``rx_err_drop_offload_capa:RTE_DEV_RX_ERR_PKT_DROP_OFFLOAD_L1_FCS``.
> > +
> > +
> > +.. _nic_features_l3_csum_rx_error_packet_drop:
> > +
> > +L3 checksum Error Packet drop on Rx
> > +-----------------------------------
> > +
> > +Supports dropping of packets having L3 Checksum error on Rx.
> > +
> > +* **[uses] user config**: ``dev_conf.err_pkt_drop_conf.l3_csum``.
> > +* **[provides] rte_eth_dev_info**:
> ``rx_err_drop_offload_capa:RTE_DEV_RX_ERR_PKT_DROP_OFFLOAD_L3_CSUM
> ``.
> > +
> > +
> > +.. _nic_features_l4_csum_rx_error_packet_drop:
> > +
> > +L4 Checksum Error Packet drop on Rx
> > +-----------------------------------
> > +
> > +Supports dropping of packets having L1 FCS error on Rx.
> > +
> > +* **[uses] user config**: ``dev_conf.err_pkt_drop_conf.l4_csum``.
> > +* **[provides] rte_eth_dev_info**:
> ``rx_err_drop_offload_capa:RTE_DEV_RX_ERR_PKT_DROP_OFFLOAD_L4_CSUM
> ``.
> > +
> > +
> > +.. _nic_features_all_rx_error_packet_drop:
> > +
> > +All/any Error Packet drop on Rx
> > +-------------------------------
> > +
> > +Supports dropping of packets having any of the errors like L1 FSC, L3/L4
> Checksum on Rx.
>
> s/FSC/FCS
Will update in the next spin.
Thanks,
Nipun
>
> > +
> > +* **[uses] user config**: ``dev_conf.err_pkt_drop_conf.all``.
> > +* **[provides] rte_eth_dev_info**:
> ``rx_err_drop_offload_capa:RTE_DEV_RX_ERR_PKT_DROP_OFFLOAD_ALL``.
> > +
> > +
> > .. _nic_features_packet_type_parsing:
> >
> > Packet type parsing
> > diff --git a/doc/guides/testpmd_app_ug/run_app.rst
> b/doc/guides/testpmd_app_ug/run_app.rst
> > index e2539f693..20f2f8083 100644
> > --- a/doc/guides/testpmd_app_ug/run_app.rst
> > +++ b/doc/guides/testpmd_app_ug/run_app.rst
> > @@ -213,6 +213,10 @@ The command line options are:
> >
> > Enable hardware QINQ strip.
> >
> > +* ``--enable-hw-drop-err-all``
> > +
> > + Enable hardware packet drop for any error packets
> > +
> > * ``--enable-drop-en``
> >
> > Enable per-queue packet drop for packets with no descriptors.
> > —
> > 2.17.1
> >
>
> Reviewed-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
>
@@ -1027,6 +1027,41 @@ port_offload_cap_display(portid_t port_id)
printf("off\n");
}
+ if (dev_info.rx_offload_capa & DEV_RX_OFFLOAD_ERR_PKT_DROP) {
+ if (dev_info.rx_err_drop_offload_capa &
+ RTE_DEV_RX_ERR_PKT_DROP_OFFLOAD_L1_FCS) {
+ printf("RX L1 FCS Error pkt drop: ");
+ if (ports[port_id].dev_conf.err_pkt_drop_conf.l1_fcs)
+ printf("on\n");
+ else
+ printf("off\n");
+ }
+ if (dev_info.rx_err_drop_offload_capa &
+ RTE_DEV_RX_ERR_PKT_DROP_OFFLOAD_L3_CSUM) {
+ printf("RX L3 Csum Error pkt drop: ");
+ if (ports[port_id].dev_conf.err_pkt_drop_conf.l3_csum)
+ printf("on\n");
+ else
+ printf("off\n");
+ }
+ if (dev_info.rx_err_drop_offload_capa &
+ RTE_DEV_RX_ERR_PKT_DROP_OFFLOAD_L4_CSUM) {
+ printf("RX L4 Csum Error pkt drop: ");
+ if (ports[port_id].dev_conf.err_pkt_drop_conf.l4_csum)
+ printf("on\n");
+ else
+ printf("off\n");
+ }
+ if (dev_info.rx_err_drop_offload_capa &
+ RTE_DEV_RX_ERR_PKT_DROP_OFFLOAD_ALL) {
+ printf("RX all Error pkt drop: ");
+ if (ports[port_id].dev_conf.err_pkt_drop_conf.all)
+ printf("on\n");
+ else
+ printf("off\n");
+ }
+ }
+
if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_VLAN_INSERT) {
printf("VLAN insert: ");
if (ports[port_id].dev_conf.txmode.offloads &
@@ -142,6 +142,7 @@ usage(char* progname)
printf(" --enable-hw-vlan-strip: enable hardware vlan strip.\n");
printf(" --enable-hw-vlan-extend: enable hardware vlan extend.\n");
printf(" --enable-hw-qinq-strip: enable hardware qinq strip.\n");
+ printf(" --enable-hw-drop-err-all: enable hardware packet drop for all error packets.\n");
printf(" --enable-drop-en: enable per queue packet drop.\n");
printf(" --disable-rss: disable rss.\n");
printf(" --port-topology=<paired|chained|loop>: set port topology (paired "
@@ -631,6 +632,7 @@ launch_args_parse(int argc, char** argv)
{ "enable-hw-vlan-strip", 0, 0, 0 },
{ "enable-hw-vlan-extend", 0, 0, 0 },
{ "enable-hw-qinq-strip", 0, 0, 0 },
+ { "enable-hw-drop-err-all", 0, 0, 0 },
{ "enable-drop-en", 0, 0, 0 },
{ "disable-rss", 0, 0, 0 },
{ "port-topology", 1, 0, 0 },
@@ -1283,6 +1285,11 @@ launch_args_parse(int argc, char** argv)
rmv_interrupt = 0;
if (!strcmp(lgopts[opt_idx].name, "flow-isolate-all"))
flow_isolate_all = 1;
+ if (!strcmp(lgopts[opt_idx].name,
+ "enable-hw-drop-err-all")) {
+ rx_err_pkt_drop_all = 1;
+ }
+
if (!strcmp(lgopts[opt_idx].name, "tx-offloads")) {
char *end = NULL;
n = strtoull(optarg, &end, 16);
@@ -359,6 +359,11 @@ uint8_t lsc_interrupt = 1; /* enabled by default */
*/
uint8_t rmv_interrupt = 1; /* enabled by default */
+/*
+ * Drop all RX error packets on HW itself.
+ */
+uint8_t rx_err_pkt_drop_all = 0; /* disabled by default */
+
uint8_t hot_plug = 0; /**< hotplug disabled by default. */
/* After attach, port setup is called on event or by iterator */
@@ -3359,6 +3364,9 @@ init_port_config(void)
(rte_eth_devices[pid].data->dev_flags &
RTE_ETH_DEV_INTR_RMV))
port->dev_conf.intr_conf.rmv = 1;
+
+ if (rx_err_pkt_drop_all)
+ port->dev_conf.err_pkt_drop_conf.all = 1;
}
}
@@ -314,6 +314,7 @@ extern uint8_t no_device_start; /**<set by "--disable-device-start" parameter */
extern volatile int test_done; /* stop packet forwarding when set to 1. */
extern uint8_t lsc_interrupt; /**< disabled by "--no-lsc-interrupt" parameter */
extern uint8_t rmv_interrupt; /**< disabled by "--no-rmv-interrupt" parameter */
+extern uint8_t rx_err_pkt_drop_all; /**< enabled by "--enable-hw-drop-err-all" parameter */
extern uint32_t event_print_mask;
/**< set by "--print-event xxxx" and "--mask-event xxxx parameters */
extern bool setup_on_probe_event; /**< disabled by port setup-on iterator */
@@ -606,6 +606,50 @@ Supports inner packet L4 checksum.
``tx_offload_capa,tx_queue_offload_capa:DEV_TX_OFFLOAD_OUTER_UDP_CKSUM``.
+.. _nic_features_l1_fcs_rx_error_packet_drop:
+
+L1 FCS Error Packet drop on Rx
+------------------------------
+
+Supports dropping of packets having L1 FCS error on Rx.
+
+* **[uses] user config**: ``dev_conf.err_pkt_drop_conf.l1_fcs``.
+* **[provides] rte_eth_dev_info**: ``rx_err_drop_offload_capa:RTE_DEV_RX_ERR_PKT_DROP_OFFLOAD_L1_FCS``.
+
+
+.. _nic_features_l3_csum_rx_error_packet_drop:
+
+L3 checksum Error Packet drop on Rx
+-----------------------------------
+
+Supports dropping of packets having L3 Checksum error on Rx.
+
+* **[uses] user config**: ``dev_conf.err_pkt_drop_conf.l3_csum``.
+* **[provides] rte_eth_dev_info**: ``rx_err_drop_offload_capa:RTE_DEV_RX_ERR_PKT_DROP_OFFLOAD_L3_CSUM``.
+
+
+.. _nic_features_l4_csum_rx_error_packet_drop:
+
+L4 Checksum Error Packet drop on Rx
+-----------------------------------
+
+Supports dropping of packets having L1 FCS error on Rx.
+
+* **[uses] user config**: ``dev_conf.err_pkt_drop_conf.l4_csum``.
+* **[provides] rte_eth_dev_info**: ``rx_err_drop_offload_capa:RTE_DEV_RX_ERR_PKT_DROP_OFFLOAD_L4_CSUM``.
+
+
+.. _nic_features_all_rx_error_packet_drop:
+
+All/any Error Packet drop on Rx
+-------------------------------
+
+Supports dropping of packets having any of the errors like L1 FSC, L3/L4 Checksum on Rx.
+
+* **[uses] user config**: ``dev_conf.err_pkt_drop_conf.all``.
+* **[provides] rte_eth_dev_info**: ``rx_err_drop_offload_capa:RTE_DEV_RX_ERR_PKT_DROP_OFFLOAD_ALL``.
+
+
.. _nic_features_packet_type_parsing:
Packet type parsing
@@ -213,6 +213,10 @@ The command line options are:
Enable hardware QINQ strip.
+* ``--enable-hw-drop-err-all``
+
+ Enable hardware packet drop for any error packets
+
* ``--enable-drop-en``
Enable per-queue packet drop for packets with no descriptors.