[1/2] baseband/fpga_5gnr_fec: fix API naming
Checks
Commit Message
DPDK APIs have to be prefixed with "rte_" in order to avoid
namespace pollution.
Let's fix it while fpga_5gnr_fec API is still experimental.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
---
app/test-bbdev/test_bbdev_perf.c | 6 +++---
doc/guides/bbdevs/fpga_5gnr_fec.rst | 14 +++++++-------
drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c | 10 +++++-----
.../rte_pmd_bbdev_fpga_5gnr_fec_version.map | 2 +-
.../baseband/fpga_5gnr_fec/rte_pmd_fpga_5gnr_fec.h | 6 +++---
5 files changed, 19 insertions(+), 19 deletions(-)
Comments
On 10/2/20 1:59 AM, Maxime Coquelin wrote:
> DPDK APIs have to be prefixed with "rte_" in order to avoid
> namespace pollution.
>
> Let's fix it while fpga_5gnr_fec API is still experimental.
>
> Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
> ---
> app/test-bbdev/test_bbdev_perf.c | 6 +++---
> doc/guides/bbdevs/fpga_5gnr_fec.rst | 14 +++++++-------
> drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c | 10 +++++-----
> .../rte_pmd_bbdev_fpga_5gnr_fec_version.map | 2 +-
> .../baseband/fpga_5gnr_fec/rte_pmd_fpga_5gnr_fec.h | 6 +++---
> 5 files changed, 19 insertions(+), 19 deletions(-)
>
> diff --git a/app/test-bbdev/test_bbdev_perf.c b/app/test-bbdev/test_bbdev_perf.c
> index 45c0d62aca..14f150704e 100644
> --- a/app/test-bbdev/test_bbdev_perf.c
> +++ b/app/test-bbdev/test_bbdev_perf.c
> @@ -612,14 +612,14 @@ add_bbdev_dev(uint8_t dev_id, struct rte_bbdev_info *info,
> #ifdef RTE_LIBRTE_PMD_BBDEV_FPGA_5GNR_FEC
> if ((get_init_device() == true) &&
> (!strcmp(info->drv.driver_name, FPGA_5GNR_PF_DRIVER_NAME))) {
> - struct fpga_5gnr_fec_conf conf;
> + struct rte_fpga_5gnr_fec_conf conf;
> unsigned int i;
>
> printf("Configure FPGA 5GNR FEC Driver %s with default values\n",
> info->drv.driver_name);
>
> /* clear default configuration before initialization */
> - memset(&conf, 0, sizeof(struct fpga_5gnr_fec_conf));
> + memset(&conf, 0, sizeof(struct rte_fpga_5gnr_fec_conf));
>
> /* Set PF mode :
> * true if PF is used for data plane
> @@ -647,7 +647,7 @@ add_bbdev_dev(uint8_t dev_id, struct rte_bbdev_info *info,
> conf.flr_time_out = FLR_5G_TIMEOUT;
>
> /* setup FPGA PF with configuration information */
> - ret = fpga_5gnr_fec_configure(info->dev_name, &conf);
> + ret = rte_fpga_5gnr_fec_configure(info->dev_name, &conf);
> TEST_ASSERT_SUCCESS(ret,
> "Failed to configure 5G FPGA PF for bbdev %s",
> info->dev_name);
> diff --git a/doc/guides/bbdevs/fpga_5gnr_fec.rst b/doc/guides/bbdevs/fpga_5gnr_fec.rst
> index 6760391e8c..5849b31857 100644
> --- a/doc/guides/bbdevs/fpga_5gnr_fec.rst
> +++ b/doc/guides/bbdevs/fpga_5gnr_fec.rst
> @@ -170,12 +170,12 @@ queues, priorities, load balance, bandwidth and other settings necessary for the
> device to perform FEC functions.
>
> This configuration needs to be executed at least once after reboot or PCI FLR and can
> -be achieved by using the function ``fpga_5gnr_fec_configure()``, which sets up the
> -parameters defined in ``fpga_5gnr_fec_conf`` structure:
> +be achieved by using the function ``rte_fpga_5gnr_fec_configure()``, which sets up the
> +parameters defined in ``rte_fpga_5gnr_fec_conf`` structure:
>
> .. code-block:: c
>
> - struct fpga_5gnr_fec_conf {
> + struct rte_fpga_5gnr_fec_conf {
> bool pf_mode_en;
> uint8_t vf_ul_queues_number[FPGA_5GNR_FEC_NUM_VFS];
> uint8_t vf_dl_queues_number[FPGA_5GNR_FEC_NUM_VFS];
> @@ -214,15 +214,15 @@ parameters defined in ``fpga_5gnr_fec_conf`` structure:
> the FLR time out then set this setting to 0x262=610.
>
>
> -An example configuration code calling the function ``fpga_5gnr_fec_configure()`` is shown
> +An example configuration code calling the function ``rte_fpga_5gnr_fec_configure()`` is shown
> below:
>
> .. code-block:: c
>
> - struct fpga_5gnr_fec_conf conf;
> + struct rte_fpga_5gnr_fec_conf conf;
> unsigned int i;
>
> - memset(&conf, 0, sizeof(struct fpga_5gnr_fec_conf));
> + memset(&conf, 0, sizeof(struct rte_fpga_5gnr_fec_conf));
> conf.pf_mode_en = 1;
>
> for (i = 0; i < FPGA_5GNR_FEC_NUM_VFS; ++i) {
> @@ -235,7 +235,7 @@ below:
> conf.ul_load_balance = 64;
>
> /* setup FPGA PF */
> - ret = fpga_5gnr_fec_configure(info->dev_name, &conf);
> + ret = rte_fpga_5gnr_fec_configure(info->dev_name, &conf);
> TEST_ASSERT_SUCCESS(ret,
> "Failed to configure 4G FPGA PF for bbdev %s",
4G ?
Consider a future patch to clean this up.
> info->dev_name);
> diff --git a/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c b/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c
> index 61f9c04ba2..1d73f9540e 100644
> --- a/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c
> +++ b/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c
> @@ -1944,10 +1944,10 @@ fpga_5gnr_fec_remove(struct rte_pci_device *pci_dev)
> }
>
> static inline void
> -set_default_fpga_conf(struct fpga_5gnr_fec_conf *def_conf)
> +set_default_fpga_conf(struct rte_fpga_5gnr_fec_conf *def_conf)
> {
> /* clear default configuration before initialization */
> - memset(def_conf, 0, sizeof(struct fpga_5gnr_fec_conf));
> + memset(def_conf, 0, sizeof(struct rte_fpga_5gnr_fec_conf));
> /* Set pf mode to true */
> def_conf->pf_mode_en = true;
>
> @@ -1962,15 +1962,15 @@ set_default_fpga_conf(struct fpga_5gnr_fec_conf *def_conf)
>
> /* Initial configuration of FPGA 5GNR FEC device */
> int
> -fpga_5gnr_fec_configure(const char *dev_name,
> - const struct fpga_5gnr_fec_conf *conf)
> +rte_fpga_5gnr_fec_configure(const char *dev_name,
> + const struct rte_fpga_5gnr_fec_conf *conf)
> {
> uint32_t payload_32, address;
> uint16_t payload_16;
> uint8_t payload_8;
> uint16_t q_id, vf_id, total_q_id, total_ul_q_id, total_dl_q_id;
> struct rte_bbdev *bbdev = rte_bbdev_get_named_dev(dev_name);
> - struct fpga_5gnr_fec_conf def_conf;
> + struct rte_fpga_5gnr_fec_conf def_conf;
>
> if (bbdev == NULL) {
> rte_bbdev_log(ERR,
> diff --git a/drivers/baseband/fpga_5gnr_fec/rte_pmd_bbdev_fpga_5gnr_fec_version.map b/drivers/baseband/fpga_5gnr_fec/rte_pmd_bbdev_fpga_5gnr_fec_version.map
> index d723bc9b0e..db43cd8403 100644
> --- a/drivers/baseband/fpga_5gnr_fec/rte_pmd_bbdev_fpga_5gnr_fec_version.map
> +++ b/drivers/baseband/fpga_5gnr_fec/rte_pmd_bbdev_fpga_5gnr_fec_version.map
> @@ -5,6 +5,6 @@ DPDK_21 {
> EXPERIMENTAL {
> global:
>
> - fpga_5gnr_fec_configure;
> + rte_fpga_5gnr_fec_configure;
>
> };
> diff --git a/drivers/baseband/fpga_5gnr_fec/rte_pmd_fpga_5gnr_fec.h b/drivers/baseband/fpga_5gnr_fec/rte_pmd_fpga_5gnr_fec.h
> index 70a4acf0b7..c2752fbd52 100644
> --- a/drivers/baseband/fpga_5gnr_fec/rte_pmd_fpga_5gnr_fec.h
> +++ b/drivers/baseband/fpga_5gnr_fec/rte_pmd_fpga_5gnr_fec.h
> @@ -30,7 +30,7 @@ extern "C" {
> /**
> * Structure to pass FPGA 4G FEC configuration.
4G ?
There are a number of 4G references in this file's comments.
Consider a future patch to clean this up.
> */
> -struct fpga_5gnr_fec_conf {
> +struct rte_fpga_5gnr_fec_conf {
> /** 1 if PF is used for dataplane, 0 for VFs */
> bool pf_mode_en;
> /** Number of UL queues per VF */
> @@ -64,8 +64,8 @@ struct fpga_5gnr_fec_conf {
> */
> __rte_experimental
> int
> -fpga_5gnr_fec_configure(const char *dev_name,
> - const struct fpga_5gnr_fec_conf *conf);
> +rte_fpga_5gnr_fec_configure(const char *dev_name,
> + const struct rte_fpga_5gnr_fec_conf *conf);
>
> #ifdef __cplusplus
> }
Changes look complete.
Reviewed-by: Tom Rix <trix@redhat.com>
On 10/3/20 5:26 PM, Tom Rix wrote:
>
> On 10/2/20 1:59 AM, Maxime Coquelin wrote:
>> DPDK APIs have to be prefixed with "rte_" in order to avoid
>> namespace pollution.
>>
>> Let's fix it while fpga_5gnr_fec API is still experimental.
>>
>> Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
>> ---
>> app/test-bbdev/test_bbdev_perf.c | 6 +++---
>> doc/guides/bbdevs/fpga_5gnr_fec.rst | 14 +++++++-------
>> drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c | 10 +++++-----
>> .../rte_pmd_bbdev_fpga_5gnr_fec_version.map | 2 +-
>> .../baseband/fpga_5gnr_fec/rte_pmd_fpga_5gnr_fec.h | 6 +++---
>> 5 files changed, 19 insertions(+), 19 deletions(-)
>>
>> diff --git a/app/test-bbdev/test_bbdev_perf.c b/app/test-bbdev/test_bbdev_perf.c
>> index 45c0d62aca..14f150704e 100644
>> --- a/app/test-bbdev/test_bbdev_perf.c
>> +++ b/app/test-bbdev/test_bbdev_perf.c
>> @@ -612,14 +612,14 @@ add_bbdev_dev(uint8_t dev_id, struct rte_bbdev_info *info,
>> #ifdef RTE_LIBRTE_PMD_BBDEV_FPGA_5GNR_FEC
>> if ((get_init_device() == true) &&
>> (!strcmp(info->drv.driver_name, FPGA_5GNR_PF_DRIVER_NAME))) {
>> - struct fpga_5gnr_fec_conf conf;
>> + struct rte_fpga_5gnr_fec_conf conf;
>> unsigned int i;
>>
>> printf("Configure FPGA 5GNR FEC Driver %s with default values\n",
>> info->drv.driver_name);
>>
>> /* clear default configuration before initialization */
>> - memset(&conf, 0, sizeof(struct fpga_5gnr_fec_conf));
>> + memset(&conf, 0, sizeof(struct rte_fpga_5gnr_fec_conf));
>>
>> /* Set PF mode :
>> * true if PF is used for data plane
>> @@ -647,7 +647,7 @@ add_bbdev_dev(uint8_t dev_id, struct rte_bbdev_info *info,
>> conf.flr_time_out = FLR_5G_TIMEOUT;
>>
>> /* setup FPGA PF with configuration information */
>> - ret = fpga_5gnr_fec_configure(info->dev_name, &conf);
>> + ret = rte_fpga_5gnr_fec_configure(info->dev_name, &conf);
>> TEST_ASSERT_SUCCESS(ret,
>> "Failed to configure 5G FPGA PF for bbdev %s",
>> info->dev_name);
>> diff --git a/doc/guides/bbdevs/fpga_5gnr_fec.rst b/doc/guides/bbdevs/fpga_5gnr_fec.rst
>> index 6760391e8c..5849b31857 100644
>> --- a/doc/guides/bbdevs/fpga_5gnr_fec.rst
>> +++ b/doc/guides/bbdevs/fpga_5gnr_fec.rst
>> @@ -170,12 +170,12 @@ queues, priorities, load balance, bandwidth and other settings necessary for the
>> device to perform FEC functions.
>>
>> This configuration needs to be executed at least once after reboot or PCI FLR and can
>> -be achieved by using the function ``fpga_5gnr_fec_configure()``, which sets up the
>> -parameters defined in ``fpga_5gnr_fec_conf`` structure:
>> +be achieved by using the function ``rte_fpga_5gnr_fec_configure()``, which sets up the
>> +parameters defined in ``rte_fpga_5gnr_fec_conf`` structure:
>>
>> .. code-block:: c
>>
>> - struct fpga_5gnr_fec_conf {
>> + struct rte_fpga_5gnr_fec_conf {
>> bool pf_mode_en;
>> uint8_t vf_ul_queues_number[FPGA_5GNR_FEC_NUM_VFS];
>> uint8_t vf_dl_queues_number[FPGA_5GNR_FEC_NUM_VFS];
>> @@ -214,15 +214,15 @@ parameters defined in ``fpga_5gnr_fec_conf`` structure:
>> the FLR time out then set this setting to 0x262=610.
>>
>>
>> -An example configuration code calling the function ``fpga_5gnr_fec_configure()`` is shown
>> +An example configuration code calling the function ``rte_fpga_5gnr_fec_configure()`` is shown
>> below:
>>
>> .. code-block:: c
>>
>> - struct fpga_5gnr_fec_conf conf;
>> + struct rte_fpga_5gnr_fec_conf conf;
>> unsigned int i;
>>
>> - memset(&conf, 0, sizeof(struct fpga_5gnr_fec_conf));
>> + memset(&conf, 0, sizeof(struct rte_fpga_5gnr_fec_conf));
>> conf.pf_mode_en = 1;
>>
>> for (i = 0; i < FPGA_5GNR_FEC_NUM_VFS; ++i) {
>> @@ -235,7 +235,7 @@ below:
>> conf.ul_load_balance = 64;
>>
>> /* setup FPGA PF */
>> - ret = fpga_5gnr_fec_configure(info->dev_name, &conf);
>> + ret = rte_fpga_5gnr_fec_configure(info->dev_name, &conf);
>> TEST_ASSERT_SUCCESS(ret,
>> "Failed to configure 4G FPGA PF for bbdev %s",
>
> 4G ?
>
> Consider a future patch to clean this up.
>
>> info->dev_name);
>> diff --git a/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c b/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c
>> index 61f9c04ba2..1d73f9540e 100644
>> --- a/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c
>> +++ b/drivers/baseband/fpga_5gnr_fec/rte_fpga_5gnr_fec.c
>> @@ -1944,10 +1944,10 @@ fpga_5gnr_fec_remove(struct rte_pci_device *pci_dev)
>> }
>>
>> static inline void
>> -set_default_fpga_conf(struct fpga_5gnr_fec_conf *def_conf)
>> +set_default_fpga_conf(struct rte_fpga_5gnr_fec_conf *def_conf)
>> {
>> /* clear default configuration before initialization */
>> - memset(def_conf, 0, sizeof(struct fpga_5gnr_fec_conf));
>> + memset(def_conf, 0, sizeof(struct rte_fpga_5gnr_fec_conf));
>> /* Set pf mode to true */
>> def_conf->pf_mode_en = true;
>>
>> @@ -1962,15 +1962,15 @@ set_default_fpga_conf(struct fpga_5gnr_fec_conf *def_conf)
>>
>> /* Initial configuration of FPGA 5GNR FEC device */
>> int
>> -fpga_5gnr_fec_configure(const char *dev_name,
>> - const struct fpga_5gnr_fec_conf *conf)
>> +rte_fpga_5gnr_fec_configure(const char *dev_name,
>> + const struct rte_fpga_5gnr_fec_conf *conf)
>> {
>> uint32_t payload_32, address;
>> uint16_t payload_16;
>> uint8_t payload_8;
>> uint16_t q_id, vf_id, total_q_id, total_ul_q_id, total_dl_q_id;
>> struct rte_bbdev *bbdev = rte_bbdev_get_named_dev(dev_name);
>> - struct fpga_5gnr_fec_conf def_conf;
>> + struct rte_fpga_5gnr_fec_conf def_conf;
>>
>> if (bbdev == NULL) {
>> rte_bbdev_log(ERR,
>> diff --git a/drivers/baseband/fpga_5gnr_fec/rte_pmd_bbdev_fpga_5gnr_fec_version.map b/drivers/baseband/fpga_5gnr_fec/rte_pmd_bbdev_fpga_5gnr_fec_version.map
>> index d723bc9b0e..db43cd8403 100644
>> --- a/drivers/baseband/fpga_5gnr_fec/rte_pmd_bbdev_fpga_5gnr_fec_version.map
>> +++ b/drivers/baseband/fpga_5gnr_fec/rte_pmd_bbdev_fpga_5gnr_fec_version.map
>> @@ -5,6 +5,6 @@ DPDK_21 {
>> EXPERIMENTAL {
>> global:
>>
>> - fpga_5gnr_fec_configure;
>> + rte_fpga_5gnr_fec_configure;
>>
>> };
>> diff --git a/drivers/baseband/fpga_5gnr_fec/rte_pmd_fpga_5gnr_fec.h b/drivers/baseband/fpga_5gnr_fec/rte_pmd_fpga_5gnr_fec.h
>> index 70a4acf0b7..c2752fbd52 100644
>> --- a/drivers/baseband/fpga_5gnr_fec/rte_pmd_fpga_5gnr_fec.h
>> +++ b/drivers/baseband/fpga_5gnr_fec/rte_pmd_fpga_5gnr_fec.h
>> @@ -30,7 +30,7 @@ extern "C" {
>> /**
>> * Structure to pass FPGA 4G FEC configuration.
>
> 4G ?
>
> There are a number of 4G references in this file's comments.
>
> Consider a future patch to clean this up.
Agree, I noticed that.
It has to be fixed in another series.
>> */
>> -struct fpga_5gnr_fec_conf {
>> +struct rte_fpga_5gnr_fec_conf {
>> /** 1 if PF is used for dataplane, 0 for VFs */
>> bool pf_mode_en;
>> /** Number of UL queues per VF */
>> @@ -64,8 +64,8 @@ struct fpga_5gnr_fec_conf {
>> */
>> __rte_experimental
>> int
>> -fpga_5gnr_fec_configure(const char *dev_name,
>> - const struct fpga_5gnr_fec_conf *conf);
>> +rte_fpga_5gnr_fec_configure(const char *dev_name,
>> + const struct rte_fpga_5gnr_fec_conf *conf);
>>
>> #ifdef __cplusplus
>> }
>
> Changes look complete.
>
> Reviewed-by: Tom Rix <trix@redhat.com>
>
Thanks,
Maxime
On 10/5/20 9:11 AM, Maxime Coquelin wrote:
>>> diff --git a/drivers/baseband/fpga_5gnr_fec/rte_pmd_fpga_5gnr_fec.h b/drivers/baseband/fpga_5gnr_fec/rte_pmd_fpga_5gnr_fec.h
>>> index 70a4acf0b7..c2752fbd52 100644
>>> --- a/drivers/baseband/fpga_5gnr_fec/rte_pmd_fpga_5gnr_fec.h
>>> +++ b/drivers/baseband/fpga_5gnr_fec/rte_pmd_fpga_5gnr_fec.h
>>> @@ -30,7 +30,7 @@ extern "C" {
>>> /**
>>> * Structure to pass FPGA 4G FEC configuration.
>> 4G ?
>>
>> There are a number of 4G references in this file's comments.
>>
>> Consider a future patch to clean this up.
> Agree, I noticed that.
> It has to be fixed in another series.
>
Another thing that we might consider fixing is the naming of the
drivers.
fpga_5gnr & fpga_lte are too generic, it should refer to an Intel
product/family.
Regards,
Maxime
@@ -612,14 +612,14 @@ add_bbdev_dev(uint8_t dev_id, struct rte_bbdev_info *info,
#ifdef RTE_LIBRTE_PMD_BBDEV_FPGA_5GNR_FEC
if ((get_init_device() == true) &&
(!strcmp(info->drv.driver_name, FPGA_5GNR_PF_DRIVER_NAME))) {
- struct fpga_5gnr_fec_conf conf;
+ struct rte_fpga_5gnr_fec_conf conf;
unsigned int i;
printf("Configure FPGA 5GNR FEC Driver %s with default values\n",
info->drv.driver_name);
/* clear default configuration before initialization */
- memset(&conf, 0, sizeof(struct fpga_5gnr_fec_conf));
+ memset(&conf, 0, sizeof(struct rte_fpga_5gnr_fec_conf));
/* Set PF mode :
* true if PF is used for data plane
@@ -647,7 +647,7 @@ add_bbdev_dev(uint8_t dev_id, struct rte_bbdev_info *info,
conf.flr_time_out = FLR_5G_TIMEOUT;
/* setup FPGA PF with configuration information */
- ret = fpga_5gnr_fec_configure(info->dev_name, &conf);
+ ret = rte_fpga_5gnr_fec_configure(info->dev_name, &conf);
TEST_ASSERT_SUCCESS(ret,
"Failed to configure 5G FPGA PF for bbdev %s",
info->dev_name);
@@ -170,12 +170,12 @@ queues, priorities, load balance, bandwidth and other settings necessary for the
device to perform FEC functions.
This configuration needs to be executed at least once after reboot or PCI FLR and can
-be achieved by using the function ``fpga_5gnr_fec_configure()``, which sets up the
-parameters defined in ``fpga_5gnr_fec_conf`` structure:
+be achieved by using the function ``rte_fpga_5gnr_fec_configure()``, which sets up the
+parameters defined in ``rte_fpga_5gnr_fec_conf`` structure:
.. code-block:: c
- struct fpga_5gnr_fec_conf {
+ struct rte_fpga_5gnr_fec_conf {
bool pf_mode_en;
uint8_t vf_ul_queues_number[FPGA_5GNR_FEC_NUM_VFS];
uint8_t vf_dl_queues_number[FPGA_5GNR_FEC_NUM_VFS];
@@ -214,15 +214,15 @@ parameters defined in ``fpga_5gnr_fec_conf`` structure:
the FLR time out then set this setting to 0x262=610.
-An example configuration code calling the function ``fpga_5gnr_fec_configure()`` is shown
+An example configuration code calling the function ``rte_fpga_5gnr_fec_configure()`` is shown
below:
.. code-block:: c
- struct fpga_5gnr_fec_conf conf;
+ struct rte_fpga_5gnr_fec_conf conf;
unsigned int i;
- memset(&conf, 0, sizeof(struct fpga_5gnr_fec_conf));
+ memset(&conf, 0, sizeof(struct rte_fpga_5gnr_fec_conf));
conf.pf_mode_en = 1;
for (i = 0; i < FPGA_5GNR_FEC_NUM_VFS; ++i) {
@@ -235,7 +235,7 @@ below:
conf.ul_load_balance = 64;
/* setup FPGA PF */
- ret = fpga_5gnr_fec_configure(info->dev_name, &conf);
+ ret = rte_fpga_5gnr_fec_configure(info->dev_name, &conf);
TEST_ASSERT_SUCCESS(ret,
"Failed to configure 4G FPGA PF for bbdev %s",
info->dev_name);
@@ -1944,10 +1944,10 @@ fpga_5gnr_fec_remove(struct rte_pci_device *pci_dev)
}
static inline void
-set_default_fpga_conf(struct fpga_5gnr_fec_conf *def_conf)
+set_default_fpga_conf(struct rte_fpga_5gnr_fec_conf *def_conf)
{
/* clear default configuration before initialization */
- memset(def_conf, 0, sizeof(struct fpga_5gnr_fec_conf));
+ memset(def_conf, 0, sizeof(struct rte_fpga_5gnr_fec_conf));
/* Set pf mode to true */
def_conf->pf_mode_en = true;
@@ -1962,15 +1962,15 @@ set_default_fpga_conf(struct fpga_5gnr_fec_conf *def_conf)
/* Initial configuration of FPGA 5GNR FEC device */
int
-fpga_5gnr_fec_configure(const char *dev_name,
- const struct fpga_5gnr_fec_conf *conf)
+rte_fpga_5gnr_fec_configure(const char *dev_name,
+ const struct rte_fpga_5gnr_fec_conf *conf)
{
uint32_t payload_32, address;
uint16_t payload_16;
uint8_t payload_8;
uint16_t q_id, vf_id, total_q_id, total_ul_q_id, total_dl_q_id;
struct rte_bbdev *bbdev = rte_bbdev_get_named_dev(dev_name);
- struct fpga_5gnr_fec_conf def_conf;
+ struct rte_fpga_5gnr_fec_conf def_conf;
if (bbdev == NULL) {
rte_bbdev_log(ERR,
@@ -5,6 +5,6 @@ DPDK_21 {
EXPERIMENTAL {
global:
- fpga_5gnr_fec_configure;
+ rte_fpga_5gnr_fec_configure;
};
@@ -30,7 +30,7 @@ extern "C" {
/**
* Structure to pass FPGA 4G FEC configuration.
*/
-struct fpga_5gnr_fec_conf {
+struct rte_fpga_5gnr_fec_conf {
/** 1 if PF is used for dataplane, 0 for VFs */
bool pf_mode_en;
/** Number of UL queues per VF */
@@ -64,8 +64,8 @@ struct fpga_5gnr_fec_conf {
*/
__rte_experimental
int
-fpga_5gnr_fec_configure(const char *dev_name,
- const struct fpga_5gnr_fec_conf *conf);
+rte_fpga_5gnr_fec_configure(const char *dev_name,
+ const struct rte_fpga_5gnr_fec_conf *conf);
#ifdef __cplusplus
}