[v2,0/6] add support for DOCSIS protocol

  Introduction
============

This patchset adds support for the DOCSIS protocol to the DPDK Security
API (rte_security), to be used by the AESNI-MB and QAT crypto devices to
combine and accelerate Crypto and CRC functions of the DOCSIS protocol
into a single operation.

Performing these functions in parallel as a single operation can enable a
significant performance improvement in a DPDK-based DOCSIS MAC pipeline.


Background
==========

A number of approaches to combine DOCSIS Crypto and CRC functions have
been discussed in the DPDK community to date, namely:
1) adding a new rte_accelerator API, to provide a generic interface for
   combining operations of different types
2) using rawdev through a multi-function interface, again to provide a
   generic interface for combining operations of different types
3) adding support for DOCSIS Crypto-CRC to rte_security

The third option above is the preferred approach for the following
reasons:
- it addresses the immediate use case to add DOCSIS Crypto-CRC support to
  DPDK so that it can be consumed easily by cable equipment vendors
- it uses an already existing framework in DPDK
- it will mean much less code churn in DOCSIS applications, which already
  use rte_cryptodev for encryption/decryption


Use Cases
=========

The primary use case for this proposal has already been mentioned, namely
to add DOCSIS Crypto-CRC support to DPDK:

- DOCSIS MAC: Crypto-CRC
	- Order:
		- Downstream: CRC, Encrypt
		- Upstream: Decrypt, CRC
	- Specifications:
		- Crypto: 128-bit and 256-bit AES-CFB encryption variant
		  for DOCSIS as described in section 11.1 of DOCSIS 3.1
		  Security Specification
		  (https://apps.cablelabs.com/specification/CM-SP-SECv3.1)
		- CRC: Ethernet 32-bit CRC as defined in
		  Ethernet/[ISO/IEC 8802-3]

Note that support for these chained operations is already available in
the Intel IPSec Multi-Buffer library.

However, other DOCSIS protocol functions could be optimized too in the
future using the same rte_security API for DOCSIS (e.g. Header Checksum
(HCS) calculation).

v1:
* added proposed API changes
* added security capabilities to aesni_mb crypto PMD

v2:
* added rte_security and rte_cryptodev code changes
* added AESNI MB crypto PMD code changes
* added QAT SYM crypto PMD code changes
* added crypto unit tests
* added security unit tests

David Coyle (6):
  cryptodev: add security operation to crypto operation
  security: add support for DOCSIS protocol
  crypto/aesni_mb: add support for DOCSIS protocol
  crypto/qat: add support for DOCSIS protocol
  test/crypto: add DOCSIS security test cases
  test/security: add DOCSIS capability check tests

 app/test/test_cryptodev.c                     |  552 ++++++
 ...t_cryptodev_security_docsis_test_vectors.h | 1544 +++++++++++++++++
 app/test/test_security.c                      |  139 ++
 drivers/common/qat/Makefile                   |    3 +
 .../crypto/aesni_mb/aesni_mb_pmd_private.h    |   19 +-
 drivers/crypto/aesni_mb/meson.build           |    2 +-
 drivers/crypto/aesni_mb/rte_aesni_mb_pmd.c    |  316 +++-
 .../crypto/aesni_mb/rte_aesni_mb_pmd_ops.c    |  127 ++
 drivers/crypto/qat/meson.build                |    2 +
 drivers/crypto/qat/qat_sym.c                  |  139 +-
 drivers/crypto/qat/qat_sym.h                  |   82 +-
 drivers/crypto/qat/qat_sym_capabilities.h     |   44 +
 drivers/crypto/qat/qat_sym_pmd.c              |   53 +-
 drivers/crypto/qat/qat_sym_pmd.h              |    4 +
 drivers/crypto/qat/qat_sym_session.c          |  148 ++
 drivers/crypto/qat/qat_sym_session.h          |   12 +
 lib/librte_cryptodev/rte_crypto.h             |   19 +-
 lib/librte_cryptodev/rte_cryptodev.c          |    5 +-
 lib/librte_security/rte_security.c            |    7 +
 lib/librte_security/rte_security.h            |  116 +-
 20 files changed, 3271 insertions(+), 62 deletions(-)
 create mode 100644 app/test/test_cryptodev_security_docsis_test_vectors.h