[v2,1/4] raw/common: add multi-function interface

diff --git a/config/common_base b/config/common_base
index c31175f9d..4f004968b 100644
--- a/config/common_base
+++ b/config/common_base
@@ -818,6 +818,11 @@  CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_EP_RAWDEV=y
 #
 CONFIG_RTE_LIBRTE_PMD_NTB_RAWDEV=y
 
+#
+# Compile multi-fn raw device interface
+#
+CONFIG_RTE_LIBRTE_MULTI_FN_COMMON=n
+
 #
 # Compile librte_ring
 #
diff --git a/drivers/meson.build b/drivers/meson.build
index 5502bf992..4e0caeff3 100644
--- a/drivers/meson.build
+++ b/drivers/meson.build
@@ -10,6 +10,7 @@  dpdk_driver_classes = ['common',
 	       'bus',
 	       'mempool', # depends on common and bus.
 	       'net',     # depends on common, bus, mempool
+	       'raw/common',
 	       'raw',     # depends on common, bus and net.
 	       'crypto',  # depends on common, bus and mempool (net in future).
 	       'compress', # depends on common, bus, mempool.
@@ -212,5 +213,9 @@  foreach class:dpdk_driver_classes
 		endif # build
 	endforeach
 
+	if class.contains('/')
+		class_split = class.split('/')
+		class = '_'.join(class_split)
+	endif
 	set_variable(class + '_drivers', class_drivers)
 endforeach
diff --git a/drivers/raw/Makefile b/drivers/raw/Makefile
index 80b043eb1..e16da8d95 100644
--- a/drivers/raw/Makefile
+++ b/drivers/raw/Makefile
@@ -14,5 +14,6 @@  DIRS-$(CONFIG_RTE_LIBRTE_PMD_IOAT_RAWDEV) += ioat
 DIRS-$(CONFIG_RTE_LIBRTE_PMD_NTB_RAWDEV) += ntb
 DIRS-$(CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_DMA_RAWDEV) += octeontx2_dma
 DIRS-$(CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_EP_RAWDEV) += octeontx2_ep
+DIRS-y += common
 
 include $(RTE_SDK)/mk/rte.subdir.mk
diff --git a/drivers/raw/common/Makefile b/drivers/raw/common/Makefile
new file mode 100644
index 000000000..5c9ad399f
--- /dev/null
+++ b/drivers/raw/common/Makefile
@@ -0,0 +1,8 @@ 
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2020 Intel Corporation.
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+DIRS-$(CONFIG_RTE_LIBRTE_MULTI_FN_COMMON) += multi_fn
+
+include $(RTE_SDK)/mk/rte.subdir.mk
diff --git a/drivers/raw/common/meson.build b/drivers/raw/common/meson.build
new file mode 100644
index 000000000..1a8334348
--- /dev/null
+++ b/drivers/raw/common/meson.build
@@ -0,0 +1,7 @@ 
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2020 Intel Corporation.
+
+drivers = ['multi_fn']
+std_deps = ['rawdev']
+config_flag_fmt = 'RTE_LIBRTE_@0@_COMMON'
+driver_name_fmt = 'rte_common_@0@'
diff --git a/drivers/raw/common/multi_fn/Makefile b/drivers/raw/common/multi_fn/Makefile
new file mode 100644
index 000000000..7ffbc6bb6
--- /dev/null
+++ b/drivers/raw/common/multi_fn/Makefile
@@ -0,0 +1,27 @@ 
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2020 Intel Corporation.
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+# library name
+LIB = librte_multi_fn.a
+
+# build flags
+CFLAGS += -O3
+CFLAGS += $(WERROR_FLAGS)
+CFLAGS += -DALLOW_EXPERIMENTAL_API
+
+# versioning export map
+EXPORT_MAP := rte_common_multi_fn_version.map
+
+# external library dependencies
+LDLIBS += -lrte_eal
+LDLIBS += -lrte_mempool
+LDLIBS += -lrte_rawdev
+
+SRCS-y += rte_multi_fn.c
+
+SYMLINK-y-include += rte_multi_fn.h
+SYMLINK-y-include += rte_multi_fn_driver.h
+
+include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/drivers/raw/common/multi_fn/meson.build b/drivers/raw/common/multi_fn/meson.build
new file mode 100644
index 000000000..ec331362c
--- /dev/null
+++ b/drivers/raw/common/multi_fn/meson.build
@@ -0,0 +1,9 @@ 
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2020 Intel Corporation.
+
+sources = files('rte_multi_fn.c')
+
+deps = ['rawdev', 'cryptodev', 'compressdev']
+allow_experimental_apis = true
+
+install_headers('rte_multi_fn.h')
diff --git a/drivers/raw/common/multi_fn/rte_common_multi_fn_version.map b/drivers/raw/common/multi_fn/rte_common_multi_fn_version.map
new file mode 100644
index 000000000..ff04827da
--- /dev/null
+++ b/drivers/raw/common/multi_fn/rte_common_multi_fn_version.map
@@ -0,0 +1,11 @@ 
+EXPERIMENTAL {
+	global:
+
+	rte_multi_fn_session_create;
+	rte_multi_fn_session_destroy;
+	rte_multi_fn_op_pool_create;
+	rte_multi_fn_op_bulk_alloc;
+	rte_multi_fn_op_free;
+
+	local: *;
+};
diff --git a/drivers/raw/common/multi_fn/rte_multi_fn.c b/drivers/raw/common/multi_fn/rte_multi_fn.c
new file mode 100644
index 000000000..4f8e7fd94
--- /dev/null
+++ b/drivers/raw/common/multi_fn/rte_multi_fn.c
@@ -0,0 +1,166 @@ 
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2020 Intel Corporation.
+ */
+
+#include <ctype.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <stdarg.h>
+#include <errno.h>
+#include <stdint.h>
+#include <inttypes.h>
+#include <sys/types.h>
+#include <sys/queue.h>
+
+#include <rte_string_fns.h>
+#include <rte_byteorder.h>
+#include <rte_log.h>
+#include <rte_debug.h>
+#include <rte_dev.h>
+#include <rte_memory.h>
+#include <rte_memcpy.h>
+#include <rte_memzone.h>
+#include <rte_eal.h>
+#include <rte_per_lcore.h>
+#include <rte_lcore.h>
+#include <rte_atomic.h>
+#include <rte_branch_prediction.h>
+#include <rte_common.h>
+#include <rte_malloc.h>
+#include <rte_errno.h>
+#include <rte_rawdev.h>
+
+#include "rte_multi_fn_driver.h"
+#include "rte_multi_fn.h"
+
+/* Dynamic log identifier */
+static int multi_fn_logtype;
+
+/* Logging Macros */
+#define MF_LOG(level, fmt, args...) \
+	rte_log(RTE_LOG_ ## level, multi_fn_logtype, \
+		"%s() line %u: " fmt "\n", \
+		__func__, __LINE__, ##args)
+#define MF_DEBUG(fmt, args...) \
+	MF_LOG(DEBUG, fmt, ## args)
+#define MF_INFO(fmt, args...) \
+	MF_LOG(INFO, fmt, ## args)
+#define MF_ERR(fmt, args...) \
+	MF_LOG(ERR, fmt, ## args)
+#define MF_WARN(fmt, args...) \
+	MF_LOG(WARNING, fmt, ## args)
+
+static void
+multi_fn_op_init(struct rte_mempool *mempool,
+		 __rte_unused void *opaque_arg,
+		 void *op_data,
+		 __rte_unused unsigned int i)
+{
+	struct rte_multi_fn_op *op = op_data;
+
+	memset(op_data, 0, mempool->elt_size);
+
+	op->overall_status = RTE_MULTI_FN_OP_STATUS_NOT_PROCESSED;
+	op->mempool = mempool;
+}
+
+struct rte_multi_fn_session *
+rte_multi_fn_session_create(uint16_t dev_id,
+			    struct rte_multi_fn_xform *xform,
+			    int socket_id)
+{
+	struct rte_rawdev *rawdev;
+	struct rte_rawdev_info info = {0};
+	struct rte_multi_fn_ops *mf_ops;
+
+	if (xform == NULL) {
+		MF_ERR("NULL xform for multi-function session create");
+		return NULL;
+	}
+
+	if (rte_rawdev_info_get(dev_id, &info) < 0) {
+		MF_ERR("Invalid dev_id=%d", dev_id);
+		return NULL;
+	}
+
+	rawdev = &rte_rawdevs[dev_id];
+
+	mf_ops = *((struct rte_multi_fn_ops **)(rawdev->dev_private));
+
+	RTE_FUNC_PTR_OR_ERR_RET(*mf_ops->session_create, NULL);
+	return (*mf_ops->session_create)(rawdev, xform, socket_id);
+}
+
+int
+rte_multi_fn_session_destroy(uint16_t dev_id, struct rte_multi_fn_session *sess)
+{
+	struct rte_rawdev *rawdev;
+	struct rte_rawdev_info info = {0};
+	struct rte_multi_fn_ops *mf_ops;
+
+	if (rte_rawdev_info_get(dev_id, &info) < 0) {
+		MF_ERR("Invalid dev_id=%d", dev_id);
+		return -EINVAL;
+	}
+
+	rawdev = &rte_rawdevs[dev_id];
+
+	mf_ops = *((struct rte_multi_fn_ops **)(rawdev->dev_private));
+
+	RTE_FUNC_PTR_OR_ERR_RET(*mf_ops->session_destroy, -ENOTSUP);
+	return (*mf_ops->session_destroy)(rawdev, sess);
+}
+
+struct rte_mempool *
+rte_multi_fn_op_pool_create(const char *name,
+			    uint32_t nb_elts,
+			    uint32_t cache_size,
+			    uint16_t priv_size,
+			    int socket_id)
+{
+	uint32_t elt_size = sizeof(struct rte_multi_fn_op) + priv_size;
+
+	/* Lookup mempool in case already allocated */
+	struct rte_mempool *mp = rte_mempool_lookup(name);
+
+	if (mp != NULL) {
+		if (mp->elt_size != elt_size ||
+		    mp->cache_size < cache_size ||
+		    mp->size < nb_elts) {
+			mp = NULL;
+			MF_ERR("Mempool %s already exists but with "
+			       "incompatible parameters",
+			       name);
+			return NULL;
+		}
+
+		return mp;
+	}
+
+	mp = rte_mempool_create(name,
+				nb_elts,
+				elt_size,
+				cache_size,
+				0,
+				NULL,
+				NULL,
+				multi_fn_op_init,
+				NULL,
+				socket_id,
+				0);
+
+	if (mp == NULL) {
+		MF_ERR("Failed to create mempool %s", name);
+		return NULL;
+	}
+
+	return mp;
+}
+
+RTE_INIT(rte_multi_fn_log_init)
+{
+	multi_fn_logtype = rte_log_register("pmd.raw.common.multi_fn");
+	if (multi_fn_logtype >= 0)
+		rte_log_set_level(multi_fn_logtype, RTE_LOG_INFO);
+}
diff --git a/drivers/raw/common/multi_fn/rte_multi_fn.h b/drivers/raw/common/multi_fn/rte_multi_fn.h
new file mode 100644
index 000000000..7290737f9
--- /dev/null
+++ b/drivers/raw/common/multi_fn/rte_multi_fn.h
@@ -0,0 +1,350 @@ 
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2020 Intel Corporation.
+ */
+
+#ifndef _RTE_MULTI_FN_H_
+#define _RTE_MULTI_FN_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <rte_compat.h>
+#include <rte_common.h>
+#include <rte_mbuf.h>
+#include <rte_memory.h>
+#include <rte_mempool.h>
+#include <rte_comp.h>
+#include <rte_crypto.h>
+#include <rte_rawdev.h>
+
+/** Error Detection Algorithms */
+enum rte_multi_fn_err_detect_algorithm {
+	RTE_MULTI_FN_ERR_DETECT_CRC32_ETH,
+	/**< CRC32 Ethernet */
+	RTE_MULTI_FN_ERR_DETECT_BIP32
+	/**< BIP32 */
+};
+
+/** Error Detection Operation Types */
+enum rte_multi_fn_err_detect_operation {
+	RTE_MULTI_FN_ERR_DETECT_OP_VERIFY,
+	/**< Verify error detection result */
+	RTE_MULTI_FN_ERR_DETECT_OP_GENERATE
+	/**< Generate error detection result */
+};
+
+/** Error Detection Status */
+enum rte_multi_fn_err_detect_op_status {
+	RTE_MULTI_FN_ERR_DETECT_OP_STATUS_SUCCESS,
+	/**< Operation completed successfully */
+	RTE_MULTI_FN_ERR_DETECT_OP_STATUS_NOT_PROCESSED,
+	/**< Operation has not yet been processed by a device */
+	RTE_MULTI_FN_ERR_DETECT_OP_STATUS_VERIFY_FAILED,
+	/**< Verification failed */
+	RTE_MULTI_FN_ERR_DETECT_OP_STATUS_ERROR
+	/**< Error handling operation */
+};
+
+struct rte_multi_fn_err_detect_xform {
+	enum rte_multi_fn_err_detect_operation op;
+	/**< Error detection operation type */
+	enum rte_multi_fn_err_detect_algorithm algo;
+	/**< Error detection algorithm */
+};
+
+/** Error Detection Operation */
+struct rte_multi_fn_err_detect_op {
+	struct rte_mbuf *m_src; /**< Source mbuf */
+	enum rte_multi_fn_err_detect_op_status status;
+	/**< Operation status */
+
+	struct {
+		uint16_t offset;
+		/**<
+		 * Starting point for error detection processing, specified
+		 * as the number of bytes from start of the packet in the
+		 * source mbuf
+		 */
+		uint16_t length;
+		/**<
+		 * The length, in bytes, of the source mbuf on which the error
+		 * detection operation will be computed
+		 */
+	} data; /**< Data offset and length for error detection */
+
+	struct {
+		uint8_t *data;
+		/**<
+		 * This points to the location where the error detection
+		 * result should be written (in the case of generation) or
+		 * where the purported result exists (in the case of
+		 * verification)
+		 *
+		 * The caller must ensure the required length of physically
+		 * contiguous memory is available at this address
+		 *
+		 * For a CRC, this may point into the mbuf packet data. For
+		 * an operation such as a BIP, this may point to a memory
+		 * location after the op
+		 *
+		 * For generation, the result will overwrite any data at this
+		 * location
+		 */
+		rte_iova_t phys_addr;
+		/**< Physical address of output data */
+	} output; /**< Output location */
+};
+
+/**
+ * Multi-function transform types
+ */
+enum rte_multi_fn_xform_type {
+	RTE_MULTI_FN_XFORM_TYPE_UNDEFINED,
+	/**< Undefined transform type */
+	RTE_MULTI_FN_XFORM_TYPE_CRYPTO_SYM,
+	/**< Symmetric crypto transform type */
+	RTE_MULTI_FN_XFORM_TYPE_CRYPTO_ASYM,
+	/**< Asymmetric crypto transform type */
+	RTE_MULTI_FN_XFORM_TYPE_COMP,
+	/**< Compression transform type */
+	RTE_MULTI_FN_XFORM_TYPE_ERR_DETECT
+	/**< Error detection transform type */
+};
+
+/**
+ * Multi-function transform setup data
+ *
+ * This structure is used to specify the multi-function transforms required.
+ * Multiple transforms can be chained together to specify a chain of transforms
+ * such as symmetric crypto followed by error detection, or compression followed
+ * by symmetric crypto. Each transform structure holds a single transform, with
+ * the type field specifying which transform is contained within the union.
+ */
+struct rte_multi_fn_xform {
+	struct rte_multi_fn_xform *next;
+	/**<
+	 * Next transform in the chain
+	 * - the last transform in the chain MUST set this to NULL
+	 */
+	enum rte_multi_fn_xform_type type;
+	/**< Transform type */
+
+	RTE_STD_C11
+	union {
+		struct rte_crypto_sym_xform crypto_sym;
+		/**< Symmetric crypto transform */
+		struct rte_crypto_asym_xform crypto_asym;
+		/**< Asymmetric crypto transform */
+		struct rte_comp_xform comp;
+		/**< Compression transform */
+		struct rte_multi_fn_err_detect_xform err_detect;
+		/**< Error detection transform */
+	};
+};
+
+/**
+ * Multi-function operation status
+ */
+enum rte_multi_fn_op_status {
+	RTE_MULTI_FN_OP_STATUS_SUCCESS,
+	/**< Operation completed successfully */
+	RTE_MULTI_FN_OP_STATUS_NOT_PROCESSED,
+	/**< Operation has not yet been processed by a device */
+	RTE_MULTI_FN_OP_STATUS_FAILURE,
+	/**< Operation completed with failure */
+	RTE_MULTI_FN_STATUS_INVALID_SESSION,
+	/**< Operation failed due to invalid session arguments */
+};
+
+/**
+ * Multi-function session
+ */
+struct rte_multi_fn_session;
+
+/**
+ * Operation data
+ */
+struct rte_multi_fn_op {
+	struct rte_multi_fn_op *next;
+	/**<
+	 * Next operation in the chain
+	 * - the last operation in the chain MUST set this to NULL
+	 */
+	struct rte_multi_fn_session *sess;
+	/**< Handle for the associated multi fn session */
+
+	struct rte_mempool *mempool;
+	/**< Mempool from which the operation is allocated */
+
+	struct rte_mbuf *m_src; /**< Source mbuf */
+	struct rte_mbuf *m_dst; /**< Destination mbuf */
+
+	enum rte_multi_fn_op_status overall_status;
+	/**<
+	 * Overall operation status
+	 * - indicates if all the operations in the chain succeeded or if any
+	 *   one of them failed
+	 */
+
+	uint8_t op_status;
+	/**<
+	 * Individual operation status
+	 * - indicates the status of the individual operation in the chain
+	 */
+
+	RTE_STD_C11
+	union {
+		struct rte_crypto_sym_op crypto_sym;
+		/**< Symmetric crypto operation */
+		struct rte_crypto_asym_op crypto_asym;
+		/**< Asymmetric crypto operation */
+		struct rte_comp_op comp;
+		/**< Compression operation */
+		struct rte_multi_fn_err_detect_op err_detect;
+		/**< Error detection operation */
+	};
+};
+
+/**
+ * Device information structure
+ *
+ * This structure is returned from rte_rawdev_info_get() with information
+ * about the device
+ */
+struct rte_multi_fn_dev_info {
+	uint16_t max_nb_queues;
+	/**<
+	 * Maximum number of queue pairs that can be configured on the
+	 * device
+	 */
+};
+
+/**
+ * Device configuration structure
+ *
+ * This structure should be passed to rte_rawdev_configure() to configure
+ * a device
+ */
+struct rte_multi_fn_dev_config {
+	uint16_t nb_queues; /**< Number of queue pairs to configure */
+	unsigned int socket_id; /**< Socket to allocate queues on */
+};
+
+/**
+ * Queue pair configuration structure
+ *
+ * This should be passed to rte_rawdev_queue_setup() to configure a queue pair
+ */
+struct rte_multi_fn_qp_config {
+	uint32_t nb_descriptors; /**< Number of descriptors per queue pair */
+};
+
+/**
+ * Create multi-function session as specified by the transform chain
+ *
+ * @param   dev_id	The identifier of the device
+ * @param   xform	Pointer to the first element of the session transform
+ *			chain
+ * @param   socket_id	Socket to allocate the session on
+ *
+ * @return
+ *  - Pointer to session, if successful
+ *  - NULL, on failure
+ */
+__rte_experimental
+struct rte_multi_fn_session *
+rte_multi_fn_session_create(uint16_t dev_id,
+			    struct rte_multi_fn_xform *xform,
+			    int socket_id);
+
+/**
+ * Free memory associated with a multi-function session
+ *
+ * @param   dev_id	The identifier of the device
+ * @param   sess	Multi-function session to be freed
+ *
+ * @return
+ *  - 0, if successful
+ *  - -EINVAL, if session is NULL
+ *  - -EBUSY, if not all session data has been freed
+ */
+__rte_experimental
+int
+rte_multi_fn_session_destroy(uint16_t dev_id,
+			     struct rte_multi_fn_session *sess);
+
+/**
+ * Creates a multi-function operation pool
+ *
+ * @param   name	Pool name
+ * @param   nb_elts	Number of elements in pool
+ * @param   cache_size  Number of elements to cache on lcore, see
+ *                      *rte_mempool_create* for further details about
+ *                      cache size
+ * @param   priv_size	Size of private data to allocate with each
+ *                      operation
+ * @param   socket_id   Socket to allocate memory on
+ *
+ * @return
+ *  - Pointer to mempool, if successful
+ *  - NULL, on failure
+ */
+__rte_experimental
+struct rte_mempool *
+rte_multi_fn_op_pool_create(const char *name,
+			    uint32_t nb_elts,
+			    uint32_t cache_size,
+			    uint16_t priv_size,
+			    int socket_id);
+
+/**
+ * Bulk allocate multi-function operations from a mempool with default
+ * parameters set
+ *
+ * @param   mempool	Multi-function operation mempool
+ * @param   ops		Array to place allocated multi-function operations
+ * @param   nb_ops	Number of multi-function operations to allocate
+ *
+ * @returns
+ * - nb_ops, if the number of operations requested were allocated
+ * - 0, if the requested number of ops are not available. None are allocated in
+ *   this case
+ */
+__rte_experimental
+static inline unsigned
+rte_multi_fn_op_bulk_alloc(struct rte_mempool *mempool,
+			   struct rte_multi_fn_op **ops,
+			   uint16_t nb_ops)
+{
+	int i;
+
+	if (rte_mempool_get_bulk(mempool, (void **)ops, nb_ops) == 0) {
+		for (i = 0; i < nb_ops; i++)
+			ops[i]->overall_status =
+				RTE_MULTI_FN_OP_STATUS_NOT_PROCESSED;
+
+		return nb_ops;
+	}
+
+	return 0;
+}
+
+/**
+ * Free multi-function operation back to it's mempool
+ *
+ * @param   op		Multi-function operation
+ */
+__rte_experimental
+static inline void
+rte_multi_fn_op_free(struct rte_multi_fn_op *op)
+{
+	if (op != NULL && op->mempool != NULL)
+		rte_mempool_put(op->mempool, op);
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_MULTI_FN_H_ */
diff --git a/drivers/raw/common/multi_fn/rte_multi_fn_driver.h b/drivers/raw/common/multi_fn/rte_multi_fn_driver.h
new file mode 100644
index 000000000..7e1e57fa3
--- /dev/null
+++ b/drivers/raw/common/multi_fn/rte_multi_fn_driver.h
@@ -0,0 +1,55 @@ 
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2020 Intel Corporation.
+ */
+
+#ifndef _RTE_MULTI_FN_DRIVER_H_
+#define _RTE_MULTI_FN_DRIVER_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <rte_compat.h>
+#include <rte_common.h>
+#include <rte_rawdev.h>
+#include <rte_multi_fn.h>
+
+/**
+ * Multi-function session
+ */
+struct rte_multi_fn_session {
+	void *sess_private_data;
+};
+
+/**
+ * Session create function pointer type
+ */
+typedef struct rte_multi_fn_session *(*multi_fn_session_create_t)(
+						struct rte_rawdev *,
+						struct rte_multi_fn_xform *,
+						int);
+
+/**
+ * Session destroy function pointer type
+ */
+typedef int (*multi_fn_session_destroy_t)(struct rte_rawdev *,
+					  struct rte_multi_fn_session *);
+
+/**
+ * Structure containing multi-function ops to create and destroy a session.
+ *
+ * This structure MUST be the first element of the device's private data
+ * structure pointed to by rte_rawdev->dev_private
+ */
+struct rte_multi_fn_ops {
+	multi_fn_session_create_t session_create;
+	/**< Create session function pointer */
+	multi_fn_session_destroy_t session_destroy;
+	/**< Destroy session function pointer */
+};
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_MULTI_FN_DRIVER_H_ */
diff --git a/meson.build b/meson.build
index d36580438..de952fa98 100644
--- a/meson.build
+++ b/meson.build
@@ -102,6 +102,10 @@  message(output_message + '\n')
 
 output_message = '\n===============\nDrivers Enabled\n===============\n'
 foreach class:dpdk_driver_classes
+	if class.contains('/')
+		class_split = class.split('/')
+		class = '_'.join(class_split)
+	endif
 	class_drivers = get_variable(class + '_drivers')
 	output_message += '\n' + class + ':\n\t'
 	output_count = 0
diff --git a/mk/rte.app.mk b/mk/rte.app.mk
index d295ca0a5..b836d220d 100644
--- a/mk/rte.app.mk
+++ b/mk/rte.app.mk
@@ -347,6 +347,7 @@  _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_IOAT_RAWDEV)   += -lrte_rawdev_ioat
 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_NTB_RAWDEV) += -lrte_rawdev_ntb
 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_DMA_RAWDEV) += -lrte_rawdev_octeontx2_dma
 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_EP_RAWDEV) += -lrte_rawdev_octeontx2_ep
+_LDLIBS-$(CONFIG_RTE_LIBRTE_MULTI_FN_COMMON) += -lrte_multi_fn
 endif # CONFIG_RTE_LIBRTE_RAWDEV
 
 endif # !CONFIG_RTE_BUILD_SHARED_LIBS