[01/11] net/octeontx2: setup link config based on BP level
Checks
Commit Message
Configure NIX_AF_TL3_TL2X_LINKX_CFG using schq at
level based on NIX_AF_PSE_CHANNEL_LEVEL[BP_LEVEL].
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
---
drivers/net/octeontx2/otx2_ethdev.h | 1 +
drivers/net/octeontx2/otx2_tm.c | 16 +++++++++++++++-
2 files changed, 16 insertions(+), 1 deletion(-)
@@ -304,6 +304,7 @@ struct otx2_eth_dev {
/* Contiguous queues */
uint16_t txschq_contig_list[NIX_TXSCH_LVL_CNT][MAX_TXSCHQ_PER_FUNC];
uint16_t otx2_tm_root_lvl;
+ uint16_t link_cfg_lvl;
uint16_t tm_flags;
uint16_t tm_leaf_cnt;
struct otx2_nix_tm_node_list node_list;
@@ -437,6 +437,16 @@ populate_tm_registers(struct otx2_eth_dev *dev,
*reg++ = NIX_AF_TL3X_SCHEDULE(schq);
*regval++ = (strict_schedul_prio << 24) | rr_quantum;
req->num_regs++;
+
+ /* Link configuration */
+ if (!otx2_dev_is_sdp(dev) &&
+ dev->link_cfg_lvl == NIX_TXSCH_LVL_TL3) {
+ *reg++ = NIX_AF_TL3_TL2X_LINKX_CFG(schq,
+ nix_get_link(dev));
+ *regval++ = BIT_ULL(12) | nix_get_relchan(dev);
+ req->num_regs++;
+ }
+
if (pir.rate && pir.burst) {
*reg++ = NIX_AF_TL3X_PIR(schq);
*regval++ = shaper2regval(&pir) | 1;
@@ -471,7 +481,10 @@ populate_tm_registers(struct otx2_eth_dev *dev,
else
*regval++ = (strict_schedul_prio << 24) | rr_quantum;
req->num_regs++;
- if (!otx2_dev_is_sdp(dev)) {
+
+ /* Link configuration */
+ if (!otx2_dev_is_sdp(dev) &&
+ dev->link_cfg_lvl == NIX_TXSCH_LVL_TL2) {
*reg++ = NIX_AF_TL3_TL2X_LINKX_CFG(schq,
nix_get_link(dev));
*regval++ = BIT_ULL(12) | nix_get_relchan(dev);
@@ -1144,6 +1157,7 @@ nix_tm_send_txsch_alloc_msg(struct otx2_eth_dev *dev)
return rc;
nix_tm_copy_rsp_to_dev(dev, rsp);
+ dev->link_cfg_lvl = rsp->link_cfg_lvl;
nix_tm_assign_hw_id(dev);
return 0;