Prior to this patch, all port representors detected on a given device were
probed and Ethernet devices instantiated for each of them.
This patch adds support for the standard "representor" parameter, which
implies that port representors are not probed by default anymore, except
for the list provided through device arguments.
(Patch based on prior work from Yuanhan Liu)
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Reviewed-by: Xueming Li <xuemingl@mellanox.com>
--
v3 changes:
- Adapted representor detection to the reworked mlx5_dev_spawn().
v2 changes:
- Added error message for when rte_eth_devargs_parse() fails.
---
doc/guides/nics/mlx5.rst | 12 ++++++++
doc/guides/prog_guide/poll_mode_drv.rst | 2 ++
drivers/net/mlx5/mlx5.c | 41 ++++++++++++++++++++++++++--
3 files changed, 52 insertions(+), 3 deletions(-)
@@ -392,6 +392,18 @@ Run-time configuration
Disabled by default.
+- ``representor`` parameter [list]
+
+ This parameter can be used to instantiate DPDK Ethernet devices from
+ existing port (or VF) representors configured on the device.
+
+ It is a standard parameter whose format is described in
+ :ref:`ethernet_device_standard_device_arguments`.
+
+ For instance, to probe port representors 0 through 2::
+
+ representor=[0-2]
+
Firmware configuration
~~~~~~~~~~~~~~~~~~~~~~
@@ -360,6 +360,8 @@ Ethernet Device API
The Ethernet device API exported by the Ethernet PMDs is described in the *DPDK API Reference*.
+.. _ethernet_device_standard_device_arguments:
+
Ethernet Device Standard Device Arguments
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
@@ -92,6 +92,9 @@
/* Activate Netlink support in VF mode. */
#define MLX5_VF_NL_EN "vf_nl_en"
+/* Select port representors to instantiate. */
+#define MLX5_REPRESENTOR "representor"
+
#ifndef HAVE_IBV_MLX5_MOD_MPW
#define MLX5DV_CONTEXT_FLAGS_MPW_ALLOWED (1 << 2)
#define MLX5DV_CONTEXT_FLAGS_ENHANCED_MPW (1 << 3)
@@ -443,6 +446,9 @@ mlx5_args_check(const char *key, const char *val, void *opaque)
struct mlx5_dev_config *config = opaque;
unsigned long tmp;
+ /* No-op, port representors are processed in mlx5_dev_spawn(). */
+ if (!strcmp(MLX5_REPRESENTOR, key))
+ return 0;
errno = 0;
tmp = strtoul(val, NULL, 0);
if (errno) {
@@ -515,6 +521,7 @@ mlx5_args(struct mlx5_dev_config *config, struct rte_devargs *devargs)
MLX5_RX_VEC_EN,
MLX5_L3_VXLAN_EN,
MLX5_VF_NL_EN,
+ MLX5_REPRESENTOR,
NULL,
};
struct rte_kvargs *kvlist;
@@ -672,7 +679,9 @@ mlx5_uar_init_secondary(struct rte_eth_dev *dev)
*
* @return
* A valid Ethernet device object on success, NULL otherwise and rte_errno
- * is set.
+ * is set. The following error is defined:
+ *
+ * EBUSY: device is not supposed to be spawned.
*/
static struct rte_eth_dev *
mlx5_dev_spawn(struct rte_device *dpdk_dev,
@@ -723,6 +732,26 @@ mlx5_dev_spawn(struct rte_device *dpdk_dev,
int own_domain_id = 0;
unsigned int i;
+ /* Determine if this port representor is supposed to be spawned. */
+ if (switch_info->representor && dpdk_dev->devargs) {
+ struct rte_eth_devargs eth_da;
+
+ err = rte_eth_devargs_parse(dpdk_dev->devargs->args, ð_da);
+ if (err) {
+ rte_errno = -err;
+ DRV_LOG(ERR, "failed to process device arguments: %s",
+ strerror(rte_errno));
+ return NULL;
+ }
+ for (i = 0; i < eth_da.nb_representor_ports; ++i)
+ if (eth_da.representor_ports[i] ==
+ (uint16_t)switch_info->port_name)
+ break;
+ if (i == eth_da.nb_representor_ports) {
+ rte_errno = EBUSY;
+ return NULL;
+ }
+ }
/* Prepare shared data between primary and secondary process. */
mlx5_prepare_shared_data();
errno = 0;
@@ -1343,8 +1372,12 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv __rte_unused,
list[i].eth_dev = mlx5_dev_spawn
(&pci_dev->device, list[i].ibv_dev, vf, &list[i].info);
- if (!list[i].eth_dev)
- break;
+ if (!list[i].eth_dev) {
+ if (rte_errno != EBUSY)
+ break;
+ /* Device is disabled, ignore it. */
+ continue;
+ }
restore = list[i].eth_dev->data->dev_flags;
rte_eth_copy_pci_info(list[i].eth_dev, pci_dev);
/* Restore non-PCI flags cleared by the above call. */
@@ -1370,6 +1403,8 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv __rte_unused,
ret = -rte_errno;
/* Roll back. */
while (i--) {
+ if (!list[i].eth_dev)
+ continue;
mlx5_dev_close(list[i].eth_dev);
if (rte_eal_process_type() == RTE_PROC_PRIMARY)
rte_free(list[i].eth_dev->data->dev_private);