diff mbox series

[v2,7/8] net/virtio: add IN_ORDER Rx/Tx into selection

Message ID 20180625151710.29437-8-yong.liu@intel.com (mailing list archive)
State Superseded, archived
Delegated to: Maxime Coquelin
Headers show
Series support VIRTIO_F_IN_ORDER feature | expand

Checks

Context Check Description
ci/checkpatch success coding style OK
ci/Intel-compilation success Compilation OK

Commit Message

Marvin Liu June 25, 2018, 3:17 p.m. UTC
After IN_ORDER Rx/Tx paths added, need to update Rx/Tx path selection
logic.

Rx path select logic: If IN_ORDER is disabled will select normal Rx
path. If IN_ORDER is enabled, Rx offload and merge-able are disabled
will select simple Rx path. Otherwise will select IN_ORDER Rx path.

Tx path select logic: If IN_ORDER is disabled will select normal Tx
path. If IN_ORDER is enabled and merge-able is disabled will select
simple Tx path. Otherwise will select IN_ORDER Tx path.

Signed-off-by: Marvin Liu <yong.liu@intel.com>

Comments

Maxime Coquelin June 27, 2018, 8:19 a.m. UTC | #1
On 06/25/2018 05:17 PM, Marvin Liu wrote:
> After IN_ORDER Rx/Tx paths added, need to update Rx/Tx path selection
> logic.
> 
> Rx path select logic: If IN_ORDER is disabled will select normal Rx
> path. If IN_ORDER is enabled, Rx offload and merge-able are disabled
> will select simple Rx path. Otherwise will select IN_ORDER Rx path.
> 
> Tx path select logic: If IN_ORDER is disabled will select normal Tx
> path. If IN_ORDER is enabled and merge-able is disabled will select
> simple Tx path. Otherwise will select IN_ORDER Tx path.
> 
> Signed-off-by: Marvin Liu <yong.liu@intel.com>
> 
> diff --git a/drivers/net/virtio/virtio_ethdev.c b/drivers/net/virtio/virtio_ethdev.c
> index df50a571a..f48a84a11 100644
> --- a/drivers/net/virtio/virtio_ethdev.c
> +++ b/drivers/net/virtio/virtio_ethdev.c
> @@ -1320,6 +1320,11 @@ set_rxtx_funcs(struct rte_eth_dev *eth_dev)
>   		PMD_INIT_LOG(INFO, "virtio: using simple Rx path on port %u",
>   			eth_dev->data->port_id);
>   		eth_dev->rx_pkt_burst = virtio_recv_pkts_vec;
> +	} else if (hw->use_inorder_rx) {
> +		PMD_INIT_LOG(INFO,
> +			"virtio: using inorder mergeable buffer Rx path on port %u",
> +			eth_dev->data->port_id);
> +		eth_dev->rx_pkt_burst = &virtio_recv_mergeable_pkts_inorder;
>   	} else if (vtpci_with_feature(hw, VIRTIO_NET_F_MRG_RXBUF)) {
>   		PMD_INIT_LOG(INFO,
>   			"virtio: using mergeable buffer Rx path on port %u",
> @@ -1335,6 +1340,10 @@ set_rxtx_funcs(struct rte_eth_dev *eth_dev)
>   		PMD_INIT_LOG(INFO, "virtio: using simple Tx path on port %u",
>   			eth_dev->data->port_id);
>   		eth_dev->tx_pkt_burst = virtio_xmit_pkts_simple;
> +	} else if (hw->use_inorder_tx) {
> +		PMD_INIT_LOG(INFO, "virtio: using inorder Tx path on port %u",
> +			eth_dev->data->port_id);
> +		eth_dev->tx_pkt_burst = virtio_xmit_pkts_inorder;
>   	} else {
>   		PMD_INIT_LOG(INFO, "virtio: using standard Tx path on port %u",
>   			eth_dev->data->port_id);
> @@ -1871,23 +1880,25 @@ virtio_dev_configure(struct rte_eth_dev *dev)
>   
>   	rte_spinlock_init(&hw->state_lock);
>   
> -	hw->use_simple_rx = 1;
> -	hw->use_simple_tx = 1;
> -
>   #if defined RTE_ARCH_ARM64 || defined RTE_ARCH_ARM
>   	if (!rte_cpu_get_flag_enabled(RTE_CPUFLAG_NEON)) {
>   		hw->use_simple_rx = 0;
>   		hw->use_simple_tx = 0;
>   	}
>   #endif
> -	if (vtpci_with_feature(hw, VIRTIO_NET_F_MRG_RXBUF)) {
> -		hw->use_simple_rx = 0;
> -		hw->use_simple_tx = 0;
> -	}
> +	if (vtpci_with_feature(hw, VIRTIO_F_IN_ORDER)) {
> +		if (vtpci_with_feature(hw, VIRTIO_NET_F_MRG_RXBUF)) {
> +			hw->use_inorder_rx = 1;
> +			hw->use_inorder_tx = 1;
> +		} else {
> +			hw->use_simple_rx = 1;
> +			hw->use_simple_tx = 1;
> +		}
>   
> -	if (rx_offloads & (DEV_RX_OFFLOAD_UDP_CKSUM |
> -			   DEV_RX_OFFLOAD_TCP_CKSUM))
> -		hw->use_simple_rx = 0;
> +		if (rx_offloads & (DEV_RX_OFFLOAD_UDP_CKSUM |
> +				   DEV_RX_OFFLOAD_TCP_CKSUM))
> +			hw->use_inorder_rx = 1;
Isn't there a problem here if mrg_rxbuf has been negotiated?

> +	}
>   
>   	return 0;
>   }
>
Marvin Liu June 28, 2018, 2:11 p.m. UTC | #2
> -----Original Message-----
> From: Maxime Coquelin [mailto:maxime.coquelin@redhat.com]
> Sent: Wednesday, June 27, 2018 4:20 PM
> To: Liu, Yong <yong.liu@intel.com>; Bie, Tiwei <tiwei.bie@intel.com>
> Cc: Wang, Zhihong <zhihong.wang@intel.com>; dev@dpdk.org
> Subject: Re: [PATCH v2 7/8] net/virtio: add IN_ORDER Rx/Tx into selection
> 
> 
> 
> On 06/25/2018 05:17 PM, Marvin Liu wrote:
> > After IN_ORDER Rx/Tx paths added, need to update Rx/Tx path selection
> > logic.
> >
> > Rx path select logic: If IN_ORDER is disabled will select normal Rx
> > path. If IN_ORDER is enabled, Rx offload and merge-able are disabled
> > will select simple Rx path. Otherwise will select IN_ORDER Rx path.
> >
> > Tx path select logic: If IN_ORDER is disabled will select normal Tx
> > path. If IN_ORDER is enabled and merge-able is disabled will select
> > simple Tx path. Otherwise will select IN_ORDER Tx path.
> >
> > Signed-off-by: Marvin Liu <yong.liu@intel.com>
> >
> > diff --git a/drivers/net/virtio/virtio_ethdev.c
> b/drivers/net/virtio/virtio_ethdev.c
> > index df50a571a..f48a84a11 100644
> > --- a/drivers/net/virtio/virtio_ethdev.c
> > +++ b/drivers/net/virtio/virtio_ethdev.c
> > @@ -1320,6 +1320,11 @@ set_rxtx_funcs(struct rte_eth_dev *eth_dev)
> >   		PMD_INIT_LOG(INFO, "virtio: using simple Rx path on port %u",
> >   			eth_dev->data->port_id);
> >   		eth_dev->rx_pkt_burst = virtio_recv_pkts_vec;
> > +	} else if (hw->use_inorder_rx) {
> > +		PMD_INIT_LOG(INFO,
> > +			"virtio: using inorder mergeable buffer Rx path on
> port %u",
> > +			eth_dev->data->port_id);
> > +		eth_dev->rx_pkt_burst = &virtio_recv_mergeable_pkts_inorder;
> >   	} else if (vtpci_with_feature(hw, VIRTIO_NET_F_MRG_RXBUF)) {
> >   		PMD_INIT_LOG(INFO,
> >   			"virtio: using mergeable buffer Rx path on port %u",
> > @@ -1335,6 +1340,10 @@ set_rxtx_funcs(struct rte_eth_dev *eth_dev)
> >   		PMD_INIT_LOG(INFO, "virtio: using simple Tx path on port %u",
> >   			eth_dev->data->port_id);
> >   		eth_dev->tx_pkt_burst = virtio_xmit_pkts_simple;
> > +	} else if (hw->use_inorder_tx) {
> > +		PMD_INIT_LOG(INFO, "virtio: using inorder Tx path on port %u",
> > +			eth_dev->data->port_id);
> > +		eth_dev->tx_pkt_burst = virtio_xmit_pkts_inorder;
> >   	} else {
> >   		PMD_INIT_LOG(INFO, "virtio: using standard Tx path on port %u",
> >   			eth_dev->data->port_id);
> > @@ -1871,23 +1880,25 @@ virtio_dev_configure(struct rte_eth_dev *dev)
> >
> >   	rte_spinlock_init(&hw->state_lock);
> >
> > -	hw->use_simple_rx = 1;
> > -	hw->use_simple_tx = 1;
> > -
> >   #if defined RTE_ARCH_ARM64 || defined RTE_ARCH_ARM
> >   	if (!rte_cpu_get_flag_enabled(RTE_CPUFLAG_NEON)) {
> >   		hw->use_simple_rx = 0;
> >   		hw->use_simple_tx = 0;
> >   	}
> >   #endif
> > -	if (vtpci_with_feature(hw, VIRTIO_NET_F_MRG_RXBUF)) {
> > -		hw->use_simple_rx = 0;
> > -		hw->use_simple_tx = 0;
> > -	}
> > +	if (vtpci_with_feature(hw, VIRTIO_F_IN_ORDER)) {
> > +		if (vtpci_with_feature(hw, VIRTIO_NET_F_MRG_RXBUF)) {
> > +			hw->use_inorder_rx = 1;
> > +			hw->use_inorder_tx = 1;
> > +		} else {
> > +			hw->use_simple_rx = 1;
> > +			hw->use_simple_tx = 1;
> > +		}
> >
> > -	if (rx_offloads & (DEV_RX_OFFLOAD_UDP_CKSUM |
> > -			   DEV_RX_OFFLOAD_TCP_CKSUM))
> > -		hw->use_simple_rx = 0;
> > +		if (rx_offloads & (DEV_RX_OFFLOAD_UDP_CKSUM |
> > +				   DEV_RX_OFFLOAD_TCP_CKSUM))
> > +			hw->use_inorder_rx = 1;
> Isn't there a problem here if mrg_rxbuf has been negotiated?
> 
That's the problem, has changed selection logic in v3. Thanks for review. 

> > +	}
> >
> >   	return 0;
> >   }
> >
diff mbox series

Patch

diff --git a/drivers/net/virtio/virtio_ethdev.c b/drivers/net/virtio/virtio_ethdev.c
index df50a571a..f48a84a11 100644
--- a/drivers/net/virtio/virtio_ethdev.c
+++ b/drivers/net/virtio/virtio_ethdev.c
@@ -1320,6 +1320,11 @@  set_rxtx_funcs(struct rte_eth_dev *eth_dev)
 		PMD_INIT_LOG(INFO, "virtio: using simple Rx path on port %u",
 			eth_dev->data->port_id);
 		eth_dev->rx_pkt_burst = virtio_recv_pkts_vec;
+	} else if (hw->use_inorder_rx) {
+		PMD_INIT_LOG(INFO,
+			"virtio: using inorder mergeable buffer Rx path on port %u",
+			eth_dev->data->port_id);
+		eth_dev->rx_pkt_burst = &virtio_recv_mergeable_pkts_inorder;
 	} else if (vtpci_with_feature(hw, VIRTIO_NET_F_MRG_RXBUF)) {
 		PMD_INIT_LOG(INFO,
 			"virtio: using mergeable buffer Rx path on port %u",
@@ -1335,6 +1340,10 @@  set_rxtx_funcs(struct rte_eth_dev *eth_dev)
 		PMD_INIT_LOG(INFO, "virtio: using simple Tx path on port %u",
 			eth_dev->data->port_id);
 		eth_dev->tx_pkt_burst = virtio_xmit_pkts_simple;
+	} else if (hw->use_inorder_tx) {
+		PMD_INIT_LOG(INFO, "virtio: using inorder Tx path on port %u",
+			eth_dev->data->port_id);
+		eth_dev->tx_pkt_burst = virtio_xmit_pkts_inorder;
 	} else {
 		PMD_INIT_LOG(INFO, "virtio: using standard Tx path on port %u",
 			eth_dev->data->port_id);
@@ -1871,23 +1880,25 @@  virtio_dev_configure(struct rte_eth_dev *dev)
 
 	rte_spinlock_init(&hw->state_lock);
 
-	hw->use_simple_rx = 1;
-	hw->use_simple_tx = 1;
-
 #if defined RTE_ARCH_ARM64 || defined RTE_ARCH_ARM
 	if (!rte_cpu_get_flag_enabled(RTE_CPUFLAG_NEON)) {
 		hw->use_simple_rx = 0;
 		hw->use_simple_tx = 0;
 	}
 #endif
-	if (vtpci_with_feature(hw, VIRTIO_NET_F_MRG_RXBUF)) {
-		hw->use_simple_rx = 0;
-		hw->use_simple_tx = 0;
-	}
+	if (vtpci_with_feature(hw, VIRTIO_F_IN_ORDER)) {
+		if (vtpci_with_feature(hw, VIRTIO_NET_F_MRG_RXBUF)) {
+			hw->use_inorder_rx = 1;
+			hw->use_inorder_tx = 1;
+		} else {
+			hw->use_simple_rx = 1;
+			hw->use_simple_tx = 1;
+		}
 
-	if (rx_offloads & (DEV_RX_OFFLOAD_UDP_CKSUM |
-			   DEV_RX_OFFLOAD_TCP_CKSUM))
-		hw->use_simple_rx = 0;
+		if (rx_offloads & (DEV_RX_OFFLOAD_UDP_CKSUM |
+				   DEV_RX_OFFLOAD_TCP_CKSUM))
+			hw->use_inorder_rx = 1;
+	}
 
 	return 0;
 }