Keep alive is executing AENQ interrupt periodically. It allows to check
health of the device and trigger reset event if the device will stop
responding.
To check for the state of the device, the DPDK application must call
rte_timer_manage().
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
---
drivers/net/ena/ena_ethdev.c | 58 ++++++++++++++++++++++++++++++++++++++++++--
drivers/net/ena/ena_ethdev.h | 9 +++++++
2 files changed, 65 insertions(+), 2 deletions(-)
@@ -249,6 +249,7 @@ static int ena_rss_reta_query(struct rte_eth_dev *dev,
uint16_t reta_size);
static int ena_get_sset_count(struct rte_eth_dev *dev, int sset);
static void ena_interrupt_handler_rte(void *cb_arg);
+static void ena_timer_wd_callback(struct rte_timer *timer, void *arg);
static const struct eth_dev_ops ena_dev_ops = {
.dev_configure = ena_dev_configure,
@@ -979,6 +980,7 @@ static int ena_start(struct rte_eth_dev *dev)
{
struct ena_adapter *adapter =
(struct ena_adapter *)(dev->data->dev_private);
+ uint64_t ticks;
int rc = 0;
rc = ena_check_valid_conf(adapter);
@@ -1002,6 +1004,13 @@ static int ena_start(struct rte_eth_dev *dev)
ena_stats_restart(dev);
+ adapter->timestamp_wd = rte_get_timer_cycles();
+ adapter->keep_alive_timeout = ENA_DEVICE_KALIVE_TIMEOUT;
+
+ ticks = rte_get_timer_hz();
+ rte_timer_reset(&adapter->timer_wd, ticks, PERIODICAL, rte_lcore_id(),
+ ena_timer_wd_callback, adapter);
+
adapter->state = ENA_ADAPTER_STATE_RUNNING;
return 0;
@@ -1012,6 +1021,8 @@ static void ena_stop(struct rte_eth_dev *dev)
struct ena_adapter *adapter =
(struct ena_adapter *)(dev->data->dev_private);
+ rte_timer_stop_sync(&adapter->timer_wd);
+
adapter->state = ENA_ADAPTER_STATE_STOPPED;
}
@@ -1358,7 +1369,8 @@ static int ena_device_init(struct ena_com_dev *ena_dev,
}
aenq_groups = BIT(ENA_ADMIN_LINK_CHANGE) |
- BIT(ENA_ADMIN_NOTIFICATION);
+ BIT(ENA_ADMIN_NOTIFICATION) |
+ BIT(ENA_ADMIN_KEEP_ALIVE);
aenq_groups &= get_feat_ctx->aenq.supported_groups;
rc = ena_com_set_aenq_config(ena_dev, aenq_groups);
@@ -1388,6 +1400,26 @@ static void ena_interrupt_handler_rte(void *cb_arg)
ena_com_aenq_intr_handler(ena_dev, adapter);
}
+static void ena_timer_wd_callback(__rte_unused struct rte_timer *timer,
+ void *arg)
+{
+ struct ena_adapter *adapter = (struct ena_adapter *)arg;
+ struct rte_eth_dev *dev = adapter->rte_dev;
+
+ if (adapter->keep_alive_timeout == ENA_HW_HINTS_NO_TIMEOUT)
+ return;
+
+ /* Within reasonable timing range no memory barriers are needed */
+ if ((rte_get_timer_cycles() - adapter->timestamp_wd) >=
+ adapter->keep_alive_timeout) {
+ RTE_LOG(ERR, PMD, "The ENA device is not responding - "
+ "performing device reset...");
+ adapter->reset_reason = ENA_REGS_RESET_KEEP_ALIVE_TO;
+ _rte_eth_dev_callback_process(dev, RTE_ETH_EVENT_INTR_RESET,
+ NULL);
+ }
+}
+
static int eth_ena_dev_init(struct rte_eth_dev *eth_dev)
{
struct rte_pci_device *pci_dev;
@@ -1490,6 +1522,10 @@ static int eth_ena_dev_init(struct rte_eth_dev *eth_dev)
ena_com_set_admin_polling_mode(ena_dev, false);
ena_com_admin_aenq_enable(ena_dev);
+ if (adapters_found == 0)
+ rte_timer_subsystem_init();
+ rte_timer_init(&adapter->timer_wd);
+
adapters_found++;
adapter->state = ENA_ADAPTER_STATE_INIT;
@@ -1803,6 +1839,16 @@ static void ena_update_hints(struct ena_adapter *adapter,
/* convert to usec */
adapter->ena_dev.mmio_read.reg_read_to =
hints->mmio_read_timeout * 1000;
+
+ if (hints->driver_watchdog_timeout) {
+ if (hints->driver_watchdog_timeout == ENA_HW_HINTS_NO_TIMEOUT)
+ adapter->keep_alive_timeout = ENA_HW_HINTS_NO_TIMEOUT;
+ else
+ // Convert msecs to ticks
+ adapter->keep_alive_timeout =
+ (hints->driver_watchdog_timeout *
+ rte_get_timer_hz()) / 1000;
+ }
}
static uint16_t eth_ena_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
@@ -2022,6 +2068,14 @@ static void ena_notification(void *data,
}
}
+static void ena_keep_alive(void *adapter_data,
+ __rte_unused struct ena_admin_aenq_entry *aenq_e)
+{
+ struct ena_adapter *adapter = (struct ena_adapter *)adapter_data;
+
+ adapter->timestamp_wd = rte_get_timer_cycles();
+}
+
/**
* This handler will called for unknown event group or unimplemented handlers
**/
@@ -2035,7 +2089,7 @@ static struct ena_aenq_handlers aenq_handlers = {
.handlers = {
[ENA_ADMIN_LINK_CHANGE] = ena_update_on_link_change,
[ENA_ADMIN_NOTIFICATION] = ena_notification,
- [ENA_ADMIN_KEEP_ALIVE] = unimplemented_aenq_handler
+ [ENA_ADMIN_KEEP_ALIVE] = ena_keep_alive
},
.unimplemented_handler = unimplemented_aenq_handler
};
@@ -34,8 +34,10 @@
#ifndef _ENA_ETHDEV_H_
#define _ENA_ETHDEV_H_
+#include <rte_cycles.h>
#include <rte_pci.h>
#include <rte_bus_pci.h>
+#include <rte_timer.h>
#include "ena_com.h"
@@ -50,6 +52,9 @@
#define ENA_MMIO_DISABLE_REG_READ BIT(0)
+#define ENA_WD_TIMEOUT_SEC 3
+#define ENA_DEVICE_KALIVE_TIMEOUT (ENA_WD_TIMEOUT_SEC * rte_get_timer_hz())
+
struct ena_adapter;
enum ena_ring_type {
@@ -185,6 +190,10 @@ struct ena_adapter {
bool link_status;
enum ena_regs_reset_reason_types reset_reason;
+
+ struct rte_timer timer_wd;
+ uint64_t timestamp_wd;
+ uint64_t keep_alive_timeout;
};
#endif /* _ENA_ETHDEV_H_ */