[dpdk-dev,v7,4/4] ethdev: add shared counter support to rte_flow

Message ID 20180426172919.8450-5-declan.doherty@intel.com (mailing list archive)
State Accepted, archived
Delegated to: Ferruh Yigit
Headers

Checks

Context Check Description
ci/checkpatch success coding style OK
ci/Intel-compilation success Compilation OK

Commit Message

Doherty, Declan April 26, 2018, 5:29 p.m. UTC
Add rte_flow_action_count action data structure to enable shared
counters across multiple flows on a single port or across multiple
flows on multiple ports within the same switch domain. Also this enables
multiple count actions to be specified in a single flow action.

This patch also modifies the existing rte_flow_query API to take the
rte_flow_action structure as an input parameter instead of the
rte_flow_action_type enumeration to allow querying a specific action
from a flow rule when multiple actions of the same type are specified.

This patch also contains updates for the bonding, failsafe and mlx5 PMDs
and testpmd application which are affected by this API change.

Signed-off-by: Declan Doherty <declan.doherty@intel.com>
---
 app/test-pmd/cmdline_flow.c             |  6 ++--
 app/test-pmd/config.c                   | 19 ++++++-----
 app/test-pmd/testpmd.h                  |  2 +-
 doc/guides/prog_guide/rte_flow.rst      | 59 +++++++++++++++++++++------------
 drivers/net/bonding/rte_eth_bond_flow.c |  9 ++---
 drivers/net/failsafe/failsafe_flow.c    |  4 +--
 drivers/net/mlx5/mlx5.h                 |  2 +-
 drivers/net/mlx5/mlx5_flow.c            |  2 +-
 lib/librte_ether/rte_flow.c             |  2 +-
 lib/librte_ether/rte_flow.h             | 38 +++++++++++++++++++--
 lib/librte_ether/rte_flow_driver.h      |  2 +-
 11 files changed, 97 insertions(+), 48 deletions(-)
  

Comments

Thomas Monjalon April 26, 2018, 6:55 p.m. UTC | #1
26/04/2018 19:29, Declan Doherty:
> Add rte_flow_action_count action data structure to enable shared
> counters across multiple flows on a single port or across multiple
> flows on multiple ports within the same switch domain. Also this enables
> multiple count actions to be specified in a single flow action.
> 
> This patch also modifies the existing rte_flow_query API to take the
> rte_flow_action structure as an input parameter instead of the
> rte_flow_action_type enumeration to allow querying a specific action
> from a flow rule when multiple actions of the same type are specified.
> 
> This patch also contains updates for the bonding, failsafe and mlx5 PMDs
> and testpmd application which are affected by this API change.

The API changes must be notified in the release notes (there is a section
for API changes).
  
Ferruh Yigit April 27, 2018, 12:25 p.m. UTC | #2
On 4/26/2018 7:55 PM, Thomas Monjalon wrote:
> 26/04/2018 19:29, Declan Doherty:
>> Add rte_flow_action_count action data structure to enable shared
>> counters across multiple flows on a single port or across multiple
>> flows on multiple ports within the same switch domain. Also this enables
>> multiple count actions to be specified in a single flow action.
>>
>> This patch also modifies the existing rte_flow_query API to take the
>> rte_flow_action structure as an input parameter instead of the
>> rte_flow_action_type enumeration to allow querying a specific action
>> from a flow rule when multiple actions of the same type are specified.
>>
>> This patch also contains updates for the bonding, failsafe and mlx5 PMDs
>> and testpmd application which are affected by this API change.
> 
> The API changes must be notified in the release notes (there is a section
> for API changes).

Hi Declan,

If you can send the update as a separate patch, I can squash it in next-net.
  
Ferruh Yigit April 27, 2018, 2:52 p.m. UTC | #3
On 4/27/2018 1:25 PM, Ferruh Yigit wrote:
> On 4/26/2018 7:55 PM, Thomas Monjalon wrote:
>> 26/04/2018 19:29, Declan Doherty:
>>> Add rte_flow_action_count action data structure to enable shared
>>> counters across multiple flows on a single port or across multiple
>>> flows on multiple ports within the same switch domain. Also this enables
>>> multiple count actions to be specified in a single flow action.
>>>
>>> This patch also modifies the existing rte_flow_query API to take the
>>> rte_flow_action structure as an input parameter instead of the
>>> rte_flow_action_type enumeration to allow querying a specific action
>>> from a flow rule when multiple actions of the same type are specified.
>>>
>>> This patch also contains updates for the bonding, failsafe and mlx5 PMDs
>>> and testpmd application which are affected by this API change.
>>
>> The API changes must be notified in the release notes (there is a section
>> for API changes).
> 
> Hi Declan,
> 
> If you can send the update as a separate patch, I can squash it in next-net.

Thanks Declan, following addition squashed into related commit:

* ethdev: change flow APIs regarding count action:
  * ``rte_flow_create()`` API count action now requires the ``struct
rte_flow_action_count``.
  * ``rte_flow_query()`` API parameter changed from action type to action structure.
  

Patch

diff --git a/app/test-pmd/cmdline_flow.c b/app/test-pmd/cmdline_flow.c
index 1ac04a0ab..5754e7858 100644
--- a/app/test-pmd/cmdline_flow.c
+++ b/app/test-pmd/cmdline_flow.c
@@ -420,7 +420,7 @@  struct buffer {
 		} destroy; /**< Destroy arguments. */
 		struct {
 			uint32_t rule;
-			enum rte_flow_action_type action;
+			struct rte_flow_action action;
 		} query; /**< Query arguments. */
 		struct {
 			uint32_t *group;
@@ -1101,7 +1101,7 @@  static const struct token token_list[] = {
 		.next = NEXT(NEXT_ENTRY(QUERY_ACTION),
 			     NEXT_ENTRY(RULE_ID),
 			     NEXT_ENTRY(PORT_ID)),
-		.args = ARGS(ARGS_ENTRY(struct buffer, args.query.action),
+		.args = ARGS(ARGS_ENTRY(struct buffer, args.query.action.type),
 			     ARGS_ENTRY(struct buffer, args.query.rule),
 			     ARGS_ENTRY(struct buffer, port)),
 		.call = parse_query,
@@ -3842,7 +3842,7 @@  cmd_flow_parsed(const struct buffer *in)
 		break;
 	case QUERY:
 		port_flow_query(in->port, in->args.query.rule,
-				in->args.query.action);
+				&in->args.query.action);
 		break;
 	case LIST:
 		port_flow_list(in->port, in->args.list.group_n,
diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
index 0f2425229..c7dc1bfd0 100644
--- a/app/test-pmd/config.c
+++ b/app/test-pmd/config.c
@@ -1099,7 +1099,7 @@  static const struct {
 	MK_FLOW_ACTION(FLAG, 0),
 	MK_FLOW_ACTION(QUEUE, sizeof(struct rte_flow_action_queue)),
 	MK_FLOW_ACTION(DROP, 0),
-	MK_FLOW_ACTION(COUNT, 0),
+	MK_FLOW_ACTION(COUNT, sizeof(struct rte_flow_action_count)),
 	MK_FLOW_ACTION(RSS, sizeof(struct rte_flow_action_rss)),
 	MK_FLOW_ACTION(PF, 0),
 	MK_FLOW_ACTION(VF, sizeof(struct rte_flow_action_vf)),
@@ -1452,7 +1452,7 @@  port_flow_flush(portid_t port_id)
 /** Query a flow rule. */
 int
 port_flow_query(portid_t port_id, uint32_t rule,
-		enum rte_flow_action_type action)
+		const struct rte_flow_action *action)
 {
 	struct rte_flow_error error;
 	struct rte_port *port;
@@ -1473,16 +1473,17 @@  port_flow_query(portid_t port_id, uint32_t rule,
 		printf("Flow rule #%u not found\n", rule);
 		return -ENOENT;
 	}
-	if ((unsigned int)action >= RTE_DIM(flow_action) ||
-	    !flow_action[action].name)
+	if ((unsigned int)action->type >= RTE_DIM(flow_action) ||
+	    !flow_action[action->type].name)
 		name = "unknown";
 	else
-		name = flow_action[action].name;
-	switch (action) {
+		name = flow_action[action->type].name;
+	switch (action->type) {
 	case RTE_FLOW_ACTION_TYPE_COUNT:
 		break;
 	default:
-		printf("Cannot query action type %d (%s)\n", action, name);
+		printf("Cannot query action type %d (%s)\n",
+			action->type, name);
 		return -ENOTSUP;
 	}
 	/* Poisoning to make sure PMDs update it in case of error. */
@@ -1490,7 +1491,7 @@  port_flow_query(portid_t port_id, uint32_t rule,
 	memset(&query, 0, sizeof(query));
 	if (rte_flow_query(port_id, pf->flow, action, &query, &error))
 		return port_flow_complain(&error);
-	switch (action) {
+	switch (action->type) {
 	case RTE_FLOW_ACTION_TYPE_COUNT:
 		printf("%s:\n"
 		       " hits_set: %u\n"
@@ -1505,7 +1506,7 @@  port_flow_query(portid_t port_id, uint32_t rule,
 		break;
 	default:
 		printf("Cannot display result for action type %d (%s)\n",
-		       action, name);
+		       action->type, name);
 		break;
 	}
 	return 0;
diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
index a33b525e2..1af87b8f4 100644
--- a/app/test-pmd/testpmd.h
+++ b/app/test-pmd/testpmd.h
@@ -620,7 +620,7 @@  int port_flow_create(portid_t port_id,
 int port_flow_destroy(portid_t port_id, uint32_t n, const uint32_t *rule);
 int port_flow_flush(portid_t port_id);
 int port_flow_query(portid_t port_id, uint32_t rule,
-		    enum rte_flow_action_type action);
+		    const struct rte_flow_action *action);
 void port_flow_list(portid_t port_id, uint32_t n, const uint32_t *group);
 int port_flow_isolate(portid_t port_id, int set);
 
diff --git a/doc/guides/prog_guide/rte_flow.rst b/doc/guides/prog_guide/rte_flow.rst
index 5b23778c7..7af132ebf 100644
--- a/doc/guides/prog_guide/rte_flow.rst
+++ b/doc/guides/prog_guide/rte_flow.rst
@@ -1277,17 +1277,19 @@  Actions are performed in list order:
 
 .. table:: Mark, count then redirect
 
-   +-------+--------+-----------+-------+
-   | Index | Action | Field     | Value |
-   +=======+========+===========+=======+
-   | 0     | MARK   | ``mark``  | 0x2a  |
-   +-------+--------+-----------+-------+
-   | 1     | COUNT                      |
-   +-------+--------+-----------+-------+
-   | 2     | QUEUE  | ``queue`` | 10    |
-   +-------+--------+-----------+-------+
-   | 3     | END                        |
-   +-------+----------------------------+
+   +-------+--------+------------+-------+
+   | Index | Action | Field      | Value |
+   +=======+========+============+=======+
+   | 0     | MARK   | ``mark``   | 0x2a  |
+   +-------+--------+------------+-------+
+   | 1     | COUNT  | ``shared`` | 0     |
+   |       |        +------------+-------+
+   |       |        | ``id``     | 0     |
+   +-------+--------+------------+-------+
+   | 2     | QUEUE  | ``queue``  | 10    |
+   +-------+--------+------------+-------+
+   | 3     | END                         |
+   +-------+-----------------------------+
 
 |
 
@@ -1516,23 +1518,36 @@  Drop packets.
 Action: ``COUNT``
 ^^^^^^^^^^^^^^^^^
 
-Enables counters for this rule.
+Adds a counter action to a matched flow.
+
+If more than one count action is specified in a single flow rule, then each
+action must specify a unique id.
 
-These counters can be retrieved and reset through ``rte_flow_query()``, see
+Counters can be retrieved and reset through ``rte_flow_query()``, see
 ``struct rte_flow_query_count``.
 
-- Counters can be retrieved with ``rte_flow_query()``.
-- No configurable properties.
+The shared flag indicates whether the counter is unique to the flow rule the
+action is specified with, or whether it is a shared counter.
+
+For a count action with the shared flag set, then then a global device
+namespace is assumed for the counter id, so that any matched flow rules using
+a count action with the same counter id on the same port will contribute to
+that counter.
+
+For ports within the same switch domain then the counter id namespace extends
+to all ports within that switch domain.
 
 .. _table_rte_flow_action_count:
 
 .. table:: COUNT
 
-   +---------------+
-   | Field         |
-   +===============+
-   | no properties |
-   +---------------+
+   +------------+---------------------+
+   | Field      | Value               |
+   +============+=====================+
+   | ``shared`` | shared counter flag |
+   +------------+---------------------+
+   | ``id``     | counter id          |
+   +------------+---------------------+
 
 Query structure to retrieve and reset flow rule counters:
 
@@ -2282,7 +2297,7 @@  definition.
    int
    rte_flow_query(uint16_t port_id,
                   struct rte_flow *flow,
-                  enum rte_flow_action_type action,
+                  const struct rte_flow_action *action,
                   void *data,
                   struct rte_flow_error *error);
 
@@ -2290,7 +2305,7 @@  Arguments:
 
 - ``port_id``: port identifier of Ethernet device.
 - ``flow``: flow rule handle to query.
-- ``action``: action type to query.
+- ``action``: action to query, this must match prototype from flow rule.
 - ``data``: pointer to storage for the associated query data type.
 - ``error``: perform verbose error reporting if not NULL. PMDs initialize
   this structure in case of error only.
diff --git a/drivers/net/bonding/rte_eth_bond_flow.c b/drivers/net/bonding/rte_eth_bond_flow.c
index 8093c04f5..31e4bcaeb 100644
--- a/drivers/net/bonding/rte_eth_bond_flow.c
+++ b/drivers/net/bonding/rte_eth_bond_flow.c
@@ -152,6 +152,7 @@  bond_flow_flush(struct rte_eth_dev *dev, struct rte_flow_error *err)
 
 static int
 bond_flow_query_count(struct rte_eth_dev *dev, struct rte_flow *flow,
+		      const struct rte_flow_action *action,
 		      struct rte_flow_query_count *count,
 		      struct rte_flow_error *err)
 {
@@ -165,7 +166,7 @@  bond_flow_query_count(struct rte_eth_dev *dev, struct rte_flow *flow,
 	rte_memcpy(&slave_count, count, sizeof(slave_count));
 	for (i = 0; i < internals->slave_count; i++) {
 		ret = rte_flow_query(internals->slaves[i].port_id,
-				     flow->flows[i], RTE_FLOW_ACTION_TYPE_COUNT,
+				     flow->flows[i], action,
 				     &slave_count, err);
 		if (unlikely(ret != 0)) {
 			RTE_BOND_LOG(ERR, "Failed to query flow on"
@@ -182,12 +183,12 @@  bond_flow_query_count(struct rte_eth_dev *dev, struct rte_flow *flow,
 
 static int
 bond_flow_query(struct rte_eth_dev *dev, struct rte_flow *flow,
-		enum rte_flow_action_type type, void *arg,
+		const struct rte_flow_action *action, void *arg,
 		struct rte_flow_error *err)
 {
-	switch (type) {
+	switch (action->type) {
 	case RTE_FLOW_ACTION_TYPE_COUNT:
-		return bond_flow_query_count(dev, flow, arg, err);
+		return bond_flow_query_count(dev, flow, action, arg, err);
 	default:
 		return rte_flow_error_set(err, ENOTSUP,
 					  RTE_FLOW_ERROR_TYPE_ACTION, arg,
diff --git a/drivers/net/failsafe/failsafe_flow.c b/drivers/net/failsafe/failsafe_flow.c
index a97f4075d..bfe42fcee 100644
--- a/drivers/net/failsafe/failsafe_flow.c
+++ b/drivers/net/failsafe/failsafe_flow.c
@@ -174,7 +174,7 @@  fs_flow_flush(struct rte_eth_dev *dev,
 static int
 fs_flow_query(struct rte_eth_dev *dev,
 	      struct rte_flow *flow,
-	      enum rte_flow_action_type type,
+	      const struct rte_flow_action *action,
 	      void *arg,
 	      struct rte_flow_error *error)
 {
@@ -185,7 +185,7 @@  fs_flow_query(struct rte_eth_dev *dev,
 	if (sdev != NULL) {
 		int ret = rte_flow_query(PORT_ID(sdev),
 					 flow->flows[SUB_ID(sdev)],
-					 type, arg, error);
+					 action, arg, error);
 
 		if ((ret = fs_err(sdev, ret))) {
 			fs_unlock(dev, 0);
diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h
index 874978baa..c4d1d456b 100644
--- a/drivers/net/mlx5/mlx5.h
+++ b/drivers/net/mlx5/mlx5.h
@@ -277,7 +277,7 @@  int mlx5_flow_destroy(struct rte_eth_dev *dev, struct rte_flow *flow,
 void mlx5_flow_list_flush(struct rte_eth_dev *dev, struct mlx5_flows *list);
 int mlx5_flow_flush(struct rte_eth_dev *dev, struct rte_flow_error *error);
 int mlx5_flow_query(struct rte_eth_dev *dev, struct rte_flow *flow,
-		    enum rte_flow_action_type action, void *data,
+		    const struct rte_flow_action *action, void *data,
 		    struct rte_flow_error *error);
 int mlx5_flow_isolate(struct rte_eth_dev *dev, int enable,
 		      struct rte_flow_error *error);
diff --git a/drivers/net/mlx5/mlx5_flow.c b/drivers/net/mlx5/mlx5_flow.c
index 8f5fcf4d6..c385f6ced 100644
--- a/drivers/net/mlx5/mlx5_flow.c
+++ b/drivers/net/mlx5/mlx5_flow.c
@@ -3079,7 +3079,7 @@  mlx5_flow_query_count(struct ibv_counter_set *cs,
 int
 mlx5_flow_query(struct rte_eth_dev *dev __rte_unused,
 		struct rte_flow *flow,
-		enum rte_flow_action_type action __rte_unused,
+		const struct rte_flow_action *action __rte_unused,
 		void *data,
 		struct rte_flow_error *error)
 {
diff --git a/lib/librte_ether/rte_flow.c b/lib/librte_ether/rte_flow.c
index 4f94ac9b5..7947529da 100644
--- a/lib/librte_ether/rte_flow.c
+++ b/lib/librte_ether/rte_flow.c
@@ -233,7 +233,7 @@  rte_flow_flush(uint16_t port_id,
 int
 rte_flow_query(uint16_t port_id,
 	       struct rte_flow *flow,
-	       enum rte_flow_action_type action,
+	       const struct rte_flow_action *action,
 	       void *data,
 	       struct rte_flow_error *error)
 {
diff --git a/lib/librte_ether/rte_flow.h b/lib/librte_ether/rte_flow.h
index d390bbf5a..f8ba71cdb 100644
--- a/lib/librte_ether/rte_flow.h
+++ b/lib/librte_ether/rte_flow.h
@@ -1314,7 +1314,7 @@  enum rte_flow_action_type {
 	 * These counters can be retrieved and reset through rte_flow_query(),
 	 * see struct rte_flow_query_count.
 	 *
-	 * No associated configuration structure.
+	 * See struct rte_flow_action_count.
 	 */
 	RTE_FLOW_ACTION_TYPE_COUNT,
 
@@ -1546,6 +1546,38 @@  struct rte_flow_action_queue {
 	uint16_t index; /**< Queue index to use. */
 };
 
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this structure may change without prior notice
+ *
+ * RTE_FLOW_ACTION_TYPE_COUNT
+ *
+ * Adds a counter action to a matched flow.
+ *
+ * If more than one count action is specified in a single flow rule, then each
+ * action must specify a unique id.
+ *
+ * Counters can be retrieved and reset through ``rte_flow_query()``, see
+ * ``struct rte_flow_query_count``.
+ *
+ * The shared flag indicates whether the counter is unique to the flow rule the
+ * action is specified with, or whether it is a shared counter.
+ *
+ * For a count action with the shared flag set, then then a global device
+ * namespace is assumed for the counter id, so that any matched flow rules using
+ * a count action with the same counter id on the same port will contribute to
+ * that counter.
+ *
+ * For ports within the same switch domain then the counter id namespace extends
+ * to all ports within that switch domain.
+ */
+struct rte_flow_action_count {
+	uint32_t shared:1; /**< Share counter ID with other flow rules. */
+	uint32_t reserved:31; /**< Reserved, must be zero. */
+	uint32_t id; /**< Counter ID. */
+};
+
 /**
  * RTE_FLOW_ACTION_TYPE_COUNT (query)
  *
@@ -2044,7 +2076,7 @@  rte_flow_flush(uint16_t port_id,
  * @param flow
  *   Flow rule handle to query.
  * @param action
- *   Action type to query.
+ *   Action definition as defined in original flow rule.
  * @param[in, out] data
  *   Pointer to storage for the associated query data type.
  * @param[out] error
@@ -2057,7 +2089,7 @@  rte_flow_flush(uint16_t port_id,
 int
 rte_flow_query(uint16_t port_id,
 	       struct rte_flow *flow,
-	       enum rte_flow_action_type action,
+	       const struct rte_flow_action *action,
 	       void *data,
 	       struct rte_flow_error *error);
 
diff --git a/lib/librte_ether/rte_flow_driver.h b/lib/librte_ether/rte_flow_driver.h
index 3800310ba..1c90c600d 100644
--- a/lib/librte_ether/rte_flow_driver.h
+++ b/lib/librte_ether/rte_flow_driver.h
@@ -88,7 +88,7 @@  struct rte_flow_ops {
 	int (*query)
 		(struct rte_eth_dev *,
 		 struct rte_flow *,
-		 enum rte_flow_action_type,
+		 const struct rte_flow_action *,
 		 void *,
 		 struct rte_flow_error *);
 	/** See rte_flow_isolate(). */