[dpdk-dev,v4,6/6] ethdev: add shared counter support to rte_flow
Checks
Commit Message
Add rte_flow_action_count action data structure to enable shared
counters across multiple flows on a single port or across multiple
flows on multiple ports within the same switch domain. Also this enables
multiple count actions to be specified in a single flow.
This patch also modifies the existing rte_flow_query API to take the
rte_flow_action structure as an input parameter instead of the
rte_flow_action_type enumeration to allow querying a specific action
from a flow rule when multiple actions of the same type are specified.
This patch also contains updates for the failsafe PMD and
testpmd application which are affected by this API change.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
---
app/test-pmd/cmdline_flow.c | 6 ++---
app/test-pmd/config.c | 15 ++++++-----
app/test-pmd/testpmd.h | 2 +-
doc/guides/prog_guide/rte_flow.rst | 52 ++++++++++++++++++++++--------------
drivers/net/failsafe/failsafe_flow.c | 4 +--
lib/librte_ether/rte_flow.c | 2 +-
lib/librte_ether/rte_flow.h | 30 ++++++++++++++++++---
lib/librte_ether/rte_flow_driver.h | 2 +-
8 files changed, 75 insertions(+), 38 deletions(-)
Comments
On Wed, Apr 18, 2018 at 10:04:23PM +0100, Declan Doherty wrote:
> Add rte_flow_action_count action data structure to enable shared
> counters across multiple flows on a single port or across multiple
> flows on multiple ports within the same switch domain. Also this enables
> multiple count actions to be specified in a single flow.
>
> This patch also modifies the existing rte_flow_query API to take the
> rte_flow_action structure as an input parameter instead of the
> rte_flow_action_type enumeration to allow querying a specific action
> from a flow rule when multiple actions of the same type are specified.
>
> This patch also contains updates for the failsafe PMD and
> testpmd application which are affected by this API change.
>
> Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Patch is almost ready, please see the bunch of nits below.
> ---
> app/test-pmd/cmdline_flow.c | 6 ++---
> app/test-pmd/config.c | 15 ++++++-----
> app/test-pmd/testpmd.h | 2 +-
> doc/guides/prog_guide/rte_flow.rst | 52 ++++++++++++++++++++++--------------
> drivers/net/failsafe/failsafe_flow.c | 4 +--
> lib/librte_ether/rte_flow.c | 2 +-
> lib/librte_ether/rte_flow.h | 30 ++++++++++++++++++---
> lib/librte_ether/rte_flow_driver.h | 2 +-
> 8 files changed, 75 insertions(+), 38 deletions(-)
>
> diff --git a/app/test-pmd/cmdline_flow.c b/app/test-pmd/cmdline_flow.c
> index e6284ce11..cec9885d5 100644
> --- a/app/test-pmd/cmdline_flow.c
> +++ b/app/test-pmd/cmdline_flow.c
> @@ -347,7 +347,7 @@ struct buffer {
> } destroy; /**< Destroy arguments. */
> struct {
> uint32_t rule;
> - enum rte_flow_action_type action;
> + struct rte_flow_action action;
> } query; /**< Query arguments. */
> struct {
> uint32_t *group;
> @@ -874,7 +874,7 @@ static const struct token token_list[] = {
> .next = NEXT(NEXT_ENTRY(QUERY_ACTION),
> NEXT_ENTRY(RULE_ID),
> NEXT_ENTRY(PORT_ID)),
> - .args = ARGS(ARGS_ENTRY(struct buffer, args.query.action),
> + .args = ARGS(ARGS_ENTRY(struct buffer, args.query.action.type),
> ARGS_ENTRY(struct buffer, args.query.rule),
> ARGS_ENTRY(struct buffer, port)),
> .call = parse_query,
> @@ -2972,7 +2972,7 @@ cmd_flow_parsed(const struct buffer *in)
> break;
> case QUERY:
> port_flow_query(in->port, in->args.query.rule,
> - in->args.query.action);
> + &in->args.query.action);
> break;
> case LIST:
> port_flow_list(in->port, in->args.list.group_n,
> diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
> index dd051f5ca..2d4ca840d 100644
> --- a/app/test-pmd/config.c
> +++ b/app/test-pmd/config.c
> @@ -1342,7 +1342,7 @@ port_flow_flush(portid_t port_id)
> /** Query a flow rule. */
> int
> port_flow_query(portid_t port_id, uint32_t rule,
> - enum rte_flow_action_type action)
> + const struct rte_flow_action *action)
> {
> struct rte_flow_error error;
> struct rte_port *port;
> @@ -1364,15 +1364,16 @@ port_flow_query(portid_t port_id, uint32_t rule,
> return -ENOENT;
> }
> if ((unsigned int)action >= RTE_DIM(flow_action) ||
> - !flow_action[action].name)
> + !flow_action[action->type].name)
> name = "unknown";
> else
> - name = flow_action[action].name;
> - switch (action) {
> + name = flow_action[action->type].name;
> + switch (action->type) {
> case RTE_FLOW_ACTION_TYPE_COUNT:
> break;
> default:
> - printf("Cannot query action type %d (%s)\n", action, name);
> + printf("Cannot query action type %d (%s)\n",
> + action->type, name);
> return -ENOTSUP;
> }
> /* Poisoning to make sure PMDs update it in case of error. */
> @@ -1380,7 +1381,7 @@ port_flow_query(portid_t port_id, uint32_t rule,
> memset(&query, 0, sizeof(query));
> if (rte_flow_query(port_id, pf->flow, action, &query, &error))
> return port_flow_complain(&error);
> - switch (action) {
> + switch (action->type) {
> case RTE_FLOW_ACTION_TYPE_COUNT:
> printf("%s:\n"
> " hits_set: %u\n"
> @@ -1395,7 +1396,7 @@ port_flow_query(portid_t port_id, uint32_t rule,
> break;
> default:
> printf("Cannot display result for action type %d (%s)\n",
> - action, name);
> + action->type, name);
> break;
> }
> return 0;
> diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
> index 98d84da84..a8a046135 100644
> --- a/app/test-pmd/testpmd.h
> +++ b/app/test-pmd/testpmd.h
> @@ -603,7 +603,7 @@ int port_flow_create(portid_t port_id,
> int port_flow_destroy(portid_t port_id, uint32_t n, const uint32_t *rule);
> int port_flow_flush(portid_t port_id);
> int port_flow_query(portid_t port_id, uint32_t rule,
> - enum rte_flow_action_type action);
> + const struct rte_flow_action *action);
> void port_flow_list(portid_t port_id, uint32_t n, const uint32_t *group);
> int port_flow_isolate(portid_t port_id, int set);
>
> diff --git a/doc/guides/prog_guide/rte_flow.rst b/doc/guides/prog_guide/rte_flow.rst
> index 6f23ad909..9f9a16068 100644
> --- a/doc/guides/prog_guide/rte_flow.rst
> +++ b/doc/guides/prog_guide/rte_flow.rst
> @@ -1078,23 +1078,24 @@ consider all actions to be performed simultaneously:
> | 2 | END |
> +-------+--------+
>
> -|
This should stay. It's a special separator to untangle successive tables
when generating documentaton.
>
> .. _table_rte_flow_mark_count_redirect:
>
> .. table:: Mark, count and redirect
>
> - +-------+--------+-----------+-------+
> - | Index | Action | Field | Value |
> - +=======+========+===========+=======+
> - | 0 | MARK | ``mark`` | 0x2a |
> - +-------+--------+-----------+-------+
> - | 1 | COUNT |
> - +-------+--------+-----------+-------+
> - | 2 | QUEUE | ``queue`` | 10 |
> - +-------+--------+-----------+-------+
> - | 3 | END |
> - +-------+----------------------------+
> + +-------+--------+------------+-------+
> + | Index | Action | Field | Value |
> + +=======+========+============+=======+
> + | 0 | MARK | ``mark`` | 0x2a |
> + +-------+--------+------------+-------+
> + | 1 | COUNT | ``shared`` | 0 |
> + | | +------------+-------+
> + | | | ``id`` | 0 |
> + +-------+--------+------------+-------+
> + | 2 | QUEUE | ``queue`` | 10 |
> + +-------+--------+------------+-------+
> + | 3 | END |
> + +-------+-----------------------------+
>
> |
>
> @@ -1321,17 +1322,28 @@ These counters can be retrieved and reset through ``rte_flow_query()``, see
> ``struct rte_flow_query_count``.
>
> - Counters can be retrieved with ``rte_flow_query()``.
> -- No configurable properties.
> +
> +The shared flag indicates whether the counter is unique to the flow rule the
> +action is specified with, or whether it is a shared counter. A shared counter
> +scope is within that of the port the flow rule is programmed, with the exception
> +of ports which share a common switch domain, it that case the shared counter
> +scope is within all the ports in that switch domain.
> +
> +If more that one count action is specified on a single flow rule then each count
> +action must specify a unique counter id.
> +
Extraneous empty line.
>
> .. _table_rte_flow_action_count:
>
> .. table:: COUNT
>
> - +---------------+
> - | Field |
> - +===============+
> - | no properties |
> - +---------------+
> + +------------+---------------------+
> + | Field | Value |
> + +============+=====================+
> + | ``shared`` | shared counter flag |
> + +------------+---------------------+
> + | ``id`` | counter id |
> + +------------+---------------------+
>
> Query structure to retrieve and reset flow rule counters:
>
> @@ -1820,7 +1832,7 @@ definition.
> int
> rte_flow_query(uint16_t port_id,
> struct rte_flow *flow,
> - enum rte_flow_action_type action,
> + const struct rte_flow_action *action,
> void *data,
> struct rte_flow_error *error);
>
> @@ -1828,7 +1840,7 @@ Arguments:
>
> - ``port_id``: port identifier of Ethernet device.
> - ``flow``: flow rule handle to query.
> -- ``action``: action type to query.
> +- ``action``: action to query, this must match prototype from flow rule.
> - ``data``: pointer to storage for the associated query data type.
> - ``error``: perform verbose error reporting if not NULL. PMDs initialize
> this structure in case of error only.
> diff --git a/drivers/net/failsafe/failsafe_flow.c b/drivers/net/failsafe/failsafe_flow.c
> index a97f4075d..bfe42fcee 100644
> --- a/drivers/net/failsafe/failsafe_flow.c
> +++ b/drivers/net/failsafe/failsafe_flow.c
> @@ -174,7 +174,7 @@ fs_flow_flush(struct rte_eth_dev *dev,
> static int
> fs_flow_query(struct rte_eth_dev *dev,
> struct rte_flow *flow,
> - enum rte_flow_action_type type,
> + const struct rte_flow_action *action,
> void *arg,
> struct rte_flow_error *error)
> {
> @@ -185,7 +185,7 @@ fs_flow_query(struct rte_eth_dev *dev,
> if (sdev != NULL) {
> int ret = rte_flow_query(PORT_ID(sdev),
> flow->flows[SUB_ID(sdev)],
> - type, arg, error);
> + action, arg, error);
>
> if ((ret = fs_err(sdev, ret))) {
> fs_unlock(dev, 0);
> diff --git a/lib/librte_ether/rte_flow.c b/lib/librte_ether/rte_flow.c
> index a3823d874..516e6530e 100644
> --- a/lib/librte_ether/rte_flow.c
> +++ b/lib/librte_ether/rte_flow.c
> @@ -201,7 +201,7 @@ rte_flow_flush(uint16_t port_id,
> int
> rte_flow_query(uint16_t port_id,
> struct rte_flow *flow,
> - enum rte_flow_action_type action,
> + const struct rte_flow_action *action,
> void *data,
> struct rte_flow_error *error)
> {
> diff --git a/lib/librte_ether/rte_flow.h b/lib/librte_ether/rte_flow.h
> index 56e262a23..f58e96060 100644
> --- a/lib/librte_ether/rte_flow.h
> +++ b/lib/librte_ether/rte_flow.h
> @@ -995,7 +995,7 @@ enum rte_flow_action_type {
> * These counters can be retrieved and reset through rte_flow_query(),
> * see struct rte_flow_query_count.
> *
> - * No associated configuration structure.
> + * See struct rte_flow_action_count.
> */
> RTE_FLOW_ACTION_TYPE_COUNT,
>
> @@ -1104,6 +1104,30 @@ struct rte_flow_action_queue {
> uint16_t index; /**< Queue index to use. */
> };
>
> +
Extraneous empty line.
> +/**
> + * RTE_FLOW_ACTION_TYPE_COUNT
> + *
> + * Add a counter action to a matched flow
> + *
> + * If more than one count action is specified in a single flow rule, then each
> + * action must specify a unique id.
> + *
> + * For a count action with the shared flag set, then then a global device
> + * namespace is assumed for the counter id, so that any matched flow rules using
> + * a count action with the same counter id on the same port will contribute to
> + * that counter.
> + *
> + * For ports within the same switch domain then the counter id namespace extends
> + * to all ports within that switch domain.
Please keep this documentation synchronized with rte_flow.rst.
> + *
Extraneous line.
> + */
> +struct rte_flow_action_count {
> + uint32_t shared:1; /**< Share counter ID with other flow rules. */
> + uint32_t reserved:31; /**< Reserved, must be zero. */
> + uint32_t id; /**< Counter ID. */
> +};
> +
> /**
> * RTE_FLOW_ACTION_TYPE_COUNT (query)
> *
> @@ -1467,7 +1491,7 @@ rte_flow_flush(uint16_t port_id,
> * @param flow
> * Flow rule handle to query.
> * @param action
> - * Action type to query.
> + * Action definition as defined in original flow rule
Missing "."
> * @param[in, out] data
> * Pointer to storage for the associated query data type.
> * @param[out] error
> @@ -1480,7 +1504,7 @@ rte_flow_flush(uint16_t port_id,
> int
> rte_flow_query(uint16_t port_id,
> struct rte_flow *flow,
> - enum rte_flow_action_type action,
> + const struct rte_flow_action *action,
> void *data,
> struct rte_flow_error *error);
>
> diff --git a/lib/librte_ether/rte_flow_driver.h b/lib/librte_ether/rte_flow_driver.h
> index 3800310ba..1c90c600d 100644
> --- a/lib/librte_ether/rte_flow_driver.h
> +++ b/lib/librte_ether/rte_flow_driver.h
> @@ -88,7 +88,7 @@ struct rte_flow_ops {
> int (*query)
> (struct rte_eth_dev *,
> struct rte_flow *,
> - enum rte_flow_action_type,
> + const struct rte_flow_action *,
> void *,
> struct rte_flow_error *);
> /** See rte_flow_isolate(). */
> --
> 2.14.3
>
@@ -347,7 +347,7 @@ struct buffer {
} destroy; /**< Destroy arguments. */
struct {
uint32_t rule;
- enum rte_flow_action_type action;
+ struct rte_flow_action action;
} query; /**< Query arguments. */
struct {
uint32_t *group;
@@ -874,7 +874,7 @@ static const struct token token_list[] = {
.next = NEXT(NEXT_ENTRY(QUERY_ACTION),
NEXT_ENTRY(RULE_ID),
NEXT_ENTRY(PORT_ID)),
- .args = ARGS(ARGS_ENTRY(struct buffer, args.query.action),
+ .args = ARGS(ARGS_ENTRY(struct buffer, args.query.action.type),
ARGS_ENTRY(struct buffer, args.query.rule),
ARGS_ENTRY(struct buffer, port)),
.call = parse_query,
@@ -2972,7 +2972,7 @@ cmd_flow_parsed(const struct buffer *in)
break;
case QUERY:
port_flow_query(in->port, in->args.query.rule,
- in->args.query.action);
+ &in->args.query.action);
break;
case LIST:
port_flow_list(in->port, in->args.list.group_n,
@@ -1342,7 +1342,7 @@ port_flow_flush(portid_t port_id)
/** Query a flow rule. */
int
port_flow_query(portid_t port_id, uint32_t rule,
- enum rte_flow_action_type action)
+ const struct rte_flow_action *action)
{
struct rte_flow_error error;
struct rte_port *port;
@@ -1364,15 +1364,16 @@ port_flow_query(portid_t port_id, uint32_t rule,
return -ENOENT;
}
if ((unsigned int)action >= RTE_DIM(flow_action) ||
- !flow_action[action].name)
+ !flow_action[action->type].name)
name = "unknown";
else
- name = flow_action[action].name;
- switch (action) {
+ name = flow_action[action->type].name;
+ switch (action->type) {
case RTE_FLOW_ACTION_TYPE_COUNT:
break;
default:
- printf("Cannot query action type %d (%s)\n", action, name);
+ printf("Cannot query action type %d (%s)\n",
+ action->type, name);
return -ENOTSUP;
}
/* Poisoning to make sure PMDs update it in case of error. */
@@ -1380,7 +1381,7 @@ port_flow_query(portid_t port_id, uint32_t rule,
memset(&query, 0, sizeof(query));
if (rte_flow_query(port_id, pf->flow, action, &query, &error))
return port_flow_complain(&error);
- switch (action) {
+ switch (action->type) {
case RTE_FLOW_ACTION_TYPE_COUNT:
printf("%s:\n"
" hits_set: %u\n"
@@ -1395,7 +1396,7 @@ port_flow_query(portid_t port_id, uint32_t rule,
break;
default:
printf("Cannot display result for action type %d (%s)\n",
- action, name);
+ action->type, name);
break;
}
return 0;
@@ -603,7 +603,7 @@ int port_flow_create(portid_t port_id,
int port_flow_destroy(portid_t port_id, uint32_t n, const uint32_t *rule);
int port_flow_flush(portid_t port_id);
int port_flow_query(portid_t port_id, uint32_t rule,
- enum rte_flow_action_type action);
+ const struct rte_flow_action *action);
void port_flow_list(portid_t port_id, uint32_t n, const uint32_t *group);
int port_flow_isolate(portid_t port_id, int set);
@@ -1078,23 +1078,24 @@ consider all actions to be performed simultaneously:
| 2 | END |
+-------+--------+
-|
.. _table_rte_flow_mark_count_redirect:
.. table:: Mark, count and redirect
- +-------+--------+-----------+-------+
- | Index | Action | Field | Value |
- +=======+========+===========+=======+
- | 0 | MARK | ``mark`` | 0x2a |
- +-------+--------+-----------+-------+
- | 1 | COUNT |
- +-------+--------+-----------+-------+
- | 2 | QUEUE | ``queue`` | 10 |
- +-------+--------+-----------+-------+
- | 3 | END |
- +-------+----------------------------+
+ +-------+--------+------------+-------+
+ | Index | Action | Field | Value |
+ +=======+========+============+=======+
+ | 0 | MARK | ``mark`` | 0x2a |
+ +-------+--------+------------+-------+
+ | 1 | COUNT | ``shared`` | 0 |
+ | | +------------+-------+
+ | | | ``id`` | 0 |
+ +-------+--------+------------+-------+
+ | 2 | QUEUE | ``queue`` | 10 |
+ +-------+--------+------------+-------+
+ | 3 | END |
+ +-------+-----------------------------+
|
@@ -1321,17 +1322,28 @@ These counters can be retrieved and reset through ``rte_flow_query()``, see
``struct rte_flow_query_count``.
- Counters can be retrieved with ``rte_flow_query()``.
-- No configurable properties.
+
+The shared flag indicates whether the counter is unique to the flow rule the
+action is specified with, or whether it is a shared counter. A shared counter
+scope is within that of the port the flow rule is programmed, with the exception
+of ports which share a common switch domain, it that case the shared counter
+scope is within all the ports in that switch domain.
+
+If more that one count action is specified on a single flow rule then each count
+action must specify a unique counter id.
+
.. _table_rte_flow_action_count:
.. table:: COUNT
- +---------------+
- | Field |
- +===============+
- | no properties |
- +---------------+
+ +------------+---------------------+
+ | Field | Value |
+ +============+=====================+
+ | ``shared`` | shared counter flag |
+ +------------+---------------------+
+ | ``id`` | counter id |
+ +------------+---------------------+
Query structure to retrieve and reset flow rule counters:
@@ -1820,7 +1832,7 @@ definition.
int
rte_flow_query(uint16_t port_id,
struct rte_flow *flow,
- enum rte_flow_action_type action,
+ const struct rte_flow_action *action,
void *data,
struct rte_flow_error *error);
@@ -1828,7 +1840,7 @@ Arguments:
- ``port_id``: port identifier of Ethernet device.
- ``flow``: flow rule handle to query.
-- ``action``: action type to query.
+- ``action``: action to query, this must match prototype from flow rule.
- ``data``: pointer to storage for the associated query data type.
- ``error``: perform verbose error reporting if not NULL. PMDs initialize
this structure in case of error only.
@@ -174,7 +174,7 @@ fs_flow_flush(struct rte_eth_dev *dev,
static int
fs_flow_query(struct rte_eth_dev *dev,
struct rte_flow *flow,
- enum rte_flow_action_type type,
+ const struct rte_flow_action *action,
void *arg,
struct rte_flow_error *error)
{
@@ -185,7 +185,7 @@ fs_flow_query(struct rte_eth_dev *dev,
if (sdev != NULL) {
int ret = rte_flow_query(PORT_ID(sdev),
flow->flows[SUB_ID(sdev)],
- type, arg, error);
+ action, arg, error);
if ((ret = fs_err(sdev, ret))) {
fs_unlock(dev, 0);
@@ -201,7 +201,7 @@ rte_flow_flush(uint16_t port_id,
int
rte_flow_query(uint16_t port_id,
struct rte_flow *flow,
- enum rte_flow_action_type action,
+ const struct rte_flow_action *action,
void *data,
struct rte_flow_error *error)
{
@@ -995,7 +995,7 @@ enum rte_flow_action_type {
* These counters can be retrieved and reset through rte_flow_query(),
* see struct rte_flow_query_count.
*
- * No associated configuration structure.
+ * See struct rte_flow_action_count.
*/
RTE_FLOW_ACTION_TYPE_COUNT,
@@ -1104,6 +1104,30 @@ struct rte_flow_action_queue {
uint16_t index; /**< Queue index to use. */
};
+
+/**
+ * RTE_FLOW_ACTION_TYPE_COUNT
+ *
+ * Add a counter action to a matched flow
+ *
+ * If more than one count action is specified in a single flow rule, then each
+ * action must specify a unique id.
+ *
+ * For a count action with the shared flag set, then then a global device
+ * namespace is assumed for the counter id, so that any matched flow rules using
+ * a count action with the same counter id on the same port will contribute to
+ * that counter.
+ *
+ * For ports within the same switch domain then the counter id namespace extends
+ * to all ports within that switch domain.
+ *
+ */
+struct rte_flow_action_count {
+ uint32_t shared:1; /**< Share counter ID with other flow rules. */
+ uint32_t reserved:31; /**< Reserved, must be zero. */
+ uint32_t id; /**< Counter ID. */
+};
+
/**
* RTE_FLOW_ACTION_TYPE_COUNT (query)
*
@@ -1467,7 +1491,7 @@ rte_flow_flush(uint16_t port_id,
* @param flow
* Flow rule handle to query.
* @param action
- * Action type to query.
+ * Action definition as defined in original flow rule
* @param[in, out] data
* Pointer to storage for the associated query data type.
* @param[out] error
@@ -1480,7 +1504,7 @@ rte_flow_flush(uint16_t port_id,
int
rte_flow_query(uint16_t port_id,
struct rte_flow *flow,
- enum rte_flow_action_type action,
+ const struct rte_flow_action *action,
void *data,
struct rte_flow_error *error);
@@ -88,7 +88,7 @@ struct rte_flow_ops {
int (*query)
(struct rte_eth_dev *,
struct rte_flow *,
- enum rte_flow_action_type,
+ const struct rte_flow_action *,
void *,
struct rte_flow_error *);
/** See rte_flow_isolate(). */