@@ -1151,6 +1151,61 @@ int bnxt_hwrm_exec_fwd_resp(struct bnxt *bp, uint16_t target_id,
return rc;
}
+int bnxt_hwrm_func_qstats(struct bnxt *bp, uint16_t fid,
+ struct rte_eth_stats *stats)
+{
+ int rc = 0;
+ struct hwrm_func_qstats_input req = {.req_type = 0};
+ struct hwrm_func_qstats_output *resp = bp->hwrm_cmd_resp_addr;
+
+ HWRM_PREP(req, FUNC_QSTATS, -1, resp);
+
+ req.fid = rte_cpu_to_le_16(fid);
+
+ rc = bnxt_hwrm_send_message(bp, &req, sizeof(req));
+
+ HWRM_CHECK_RESULT;
+
+ memset(stats, 0, sizeof(*stats));
+
+ stats->ipackets = rte_le_to_cpu_64(resp->rx_ucast_pkts);
+ stats->ipackets += rte_le_to_cpu_64(resp->rx_mcast_pkts);
+ stats->ipackets += rte_le_to_cpu_64(resp->rx_bcast_pkts);
+ stats->ibytes = rte_le_to_cpu_64(resp->rx_ucast_bytes);
+ stats->ibytes += rte_le_to_cpu_64(resp->rx_mcast_bytes);
+ stats->ibytes += rte_le_to_cpu_64(resp->rx_bcast_bytes);
+
+ stats->opackets = rte_le_to_cpu_64(resp->tx_ucast_pkts);
+ stats->opackets += rte_le_to_cpu_64(resp->tx_mcast_pkts);
+ stats->opackets += rte_le_to_cpu_64(resp->tx_bcast_pkts);
+ stats->obytes = rte_le_to_cpu_64(resp->tx_ucast_bytes);
+ stats->obytes += rte_le_to_cpu_64(resp->tx_mcast_bytes);
+ stats->obytes += rte_le_to_cpu_64(resp->tx_bcast_bytes);
+
+ stats->ierrors = rte_le_to_cpu_64(resp->rx_err_pkts);
+ stats->oerrors = rte_le_to_cpu_64(resp->tx_err_pkts);
+ stats->rx_nombuf = rte_le_to_cpu_64(resp->rx_drop_pkts);
+
+ return rc;
+}
+
+int bnxt_hwrm_func_clr_stats(struct bnxt *bp, uint16_t fid)
+{
+ int rc = 0;
+ struct hwrm_func_clr_stats_input req = {.req_type = 0};
+ struct hwrm_func_clr_stats_output *resp = bp->hwrm_cmd_resp_addr;
+
+ HWRM_PREP(req, FUNC_CLR_STATS, -1, resp);
+
+ req.fid = rte_cpu_to_le_16(fid);
+
+ rc = bnxt_hwrm_send_message(bp, &req, sizeof(req));
+
+ HWRM_CHECK_RESULT;
+
+ return rc;
+}
+
/*
* HWRM utility functions
*/
@@ -63,6 +63,9 @@ int bnxt_hwrm_func_driver_register(struct bnxt *bp);
int bnxt_hwrm_func_qcaps(struct bnxt *bp);
int bnxt_hwrm_func_reset(struct bnxt *bp);
int bnxt_hwrm_func_driver_unregister(struct bnxt *bp, uint32_t flags);
+int bnxt_hwrm_func_qstats(struct bnxt *bp, uint16_t fid,
+ struct rte_eth_stats *stats);
+int bnxt_hwrm_func_clr_stats(struct bnxt *bp, uint16_t fid);
int bnxt_hwrm_queue_qportcfg(struct bnxt *bp);
@@ -90,6 +90,8 @@ struct ctx_hw_stats64 {
#define HWRM_FUNC_QCAPS (UINT32_C(0x15))
#define HWRM_FUNC_QCFG (UINT32_C(0x16))
#define HWRM_FUNC_CFG (UINT32_C(0x17))
+#define HWRM_FUNC_QSTATS (UINT32_C(0x18))
+#define HWRM_FUNC_CLR_STATS (UINT32_C(0x19))
#define HWRM_FUNC_DRV_UNRGTR (UINT32_C(0x1a))
#define HWRM_FUNC_VF_VNIC_IDS_QUERY (UINT32_C(0x1c))
#define HWRM_FUNC_DRV_RGTR (UINT32_C(0x1d))
@@ -2809,6 +2811,223 @@ struct hwrm_func_cfg_output {
*/
} __attribute__((packed));
+/* hwrm_func_qstats */
+/*
+ * Description: This command returns statistics of a function. The input FID
+ * value is used to indicate what function is being queried. This allows a
+ * physical function driver to query virtual functions that are children of the
+ * physical function. The HWRM shall return any unsupported counter with a value
+ * of 0xFFFFFFFF for 32-bit counters and 0xFFFFFFFFFFFFFFFF for 64-bit counters.
+ */
+/* Input (24 bytes) */
+struct hwrm_func_qstats_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format
+ * for the rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request
+ * will be optionally completed on. If the value is -1, then no
+ * CR completion will be generated. Any other value must be a
+ * valid CR ring_id value for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function
+ * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
+ * - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written
+ * when the request is complete. This area must be 16B aligned
+ * and must be cleared to zero before the request is made.
+ */
+ uint16_t fid;
+ /*
+ * Function ID of the function that is being queried. 0xFF...
+ * (All Fs) if the query is for the requesting function.
+ */
+ uint16_t unused_0[3];
+} __attribute__((packed));
+
+/* Output (176 bytes) */
+struct hwrm_func_qstats_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in
+ * parameters, and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last
+ * byte of the response is a valid flag that will read as '1'
+ * when the command has been completely written to memory.
+ */
+ uint64_t tx_ucast_pkts;
+ /* Number of transmitted unicast packets on the function. */
+ uint64_t tx_mcast_pkts;
+ /* Number of transmitted multicast packets on the function. */
+ uint64_t tx_bcast_pkts;
+ /* Number of transmitted broadcast packets on the function. */
+ uint64_t tx_err_pkts;
+ /*
+ * Number of transmitted packets that were discarded due to
+ * internal NIC resource problems. For transmit, this can only
+ * happen if TMP is configured to allow dropping in HOL blocking
+ * conditions, which is not a normal configuration.
+ */
+ uint64_t tx_drop_pkts;
+ /*
+ * Number of dropped packets on transmit path on the function.
+ * These are packets that have been marked for drop by the TE
+ * CFA block or are packets that exceeded the transmit MTU limit
+ * for the function.
+ */
+ uint64_t tx_ucast_bytes;
+ /* Number of transmitted bytes for unicast traffic on the function. */
+ uint64_t tx_mcast_bytes;
+ /*
+ * Number of transmitted bytes for multicast traffic on the
+ * function.
+ */
+ uint64_t tx_bcast_bytes;
+ /*
+ * Number of transmitted bytes for broadcast traffic on the
+ * function.
+ */
+ uint64_t rx_ucast_pkts;
+ /* Number of received unicast packets on the function. */
+ uint64_t rx_mcast_pkts;
+ /* Number of received multicast packets on the function. */
+ uint64_t rx_bcast_pkts;
+ /* Number of received broadcast packets on the function. */
+ uint64_t rx_err_pkts;
+ /*
+ * Number of received packets that were discarded on the
+ * function due to resource limitations. This can happen for 3
+ * reasons. # The BD used for the packet has a bad format. #
+ * There were no BDs available in the ring for the packet. #
+ * There were no BDs available on-chip for the packet.
+ */
+ uint64_t rx_drop_pkts;
+ /*
+ * Number of dropped packets on received path on the function.
+ * These are packets that have been marked for drop by the RE
+ * CFA.
+ */
+ uint64_t rx_ucast_bytes;
+ /* Number of received bytes for unicast traffic on the function. */
+ uint64_t rx_mcast_bytes;
+ /* Number of received bytes for multicast traffic on the function. */
+ uint64_t rx_bcast_bytes;
+ /* Number of received bytes for broadcast traffic on the function. */
+ uint64_t rx_agg_pkts;
+ /* Number of aggregated unicast packets on the function. */
+ uint64_t rx_agg_bytes;
+ /* Number of aggregated unicast bytes on the function. */
+ uint64_t rx_agg_events;
+ /* Number of aggregation events on the function. */
+ uint64_t rx_agg_aborts;
+ /* Number of aborted aggregations on the function. */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been completely
+ * written. When writing a command completion or response to an
+ * internal processor, the order of writes has to be such that
+ * this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_func_clr_stats */
+/*
+ * Description: This command clears statistics of a function. The input FID
+ * value is used to indicate what function's statistics is being cleared. This
+ * allows a physical function driver to clear statistics of virtual functions
+ * that are children of the physical function.
+ */
+/* Input (24 bytes) */
+struct hwrm_func_clr_stats_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format
+ * for the rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request
+ * will be optionally completed on. If the value is -1, then no
+ * CR completion will be generated. Any other value must be a
+ * valid CR ring_id value for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function
+ * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
+ * - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written
+ * when the request is complete. This area must be 16B aligned
+ * and must be cleared to zero before the request is made.
+ */
+ uint16_t fid;
+ /*
+ * Function ID of the function. 0xFF... (All Fs) if the query is
+ * for the requesting function.
+ */
+ uint16_t unused_0[3];
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+struct hwrm_func_clr_stats_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in
+ * parameters, and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last
+ * byte of the response is a valid flag that will read as '1'
+ * when the command has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been completely
+ * written. When writing a command completion or response to an
+ * internal processor, the order of writes has to be such that
+ * this field is written last.
+ */
+} __attribute__((packed));
+
/* hwrm_func_drv_rgtr */
/*
* Description: This command is used by the function driver to register its
@@ -429,3 +429,52 @@ int rte_pmd_bnxt_set_vf_rxmode(uint8_t port, uint16_t vf,
return rc;
}
+
+int rte_pmd_bnxt_get_vf_stats(uint8_t port,
+ uint16_t vf_id,
+ struct rte_eth_stats *stats)
+{
+ struct rte_eth_dev *dev;
+ struct rte_eth_dev_info dev_info;
+ struct bnxt *bp;
+
+ dev = &rte_eth_devices[port];
+ rte_eth_dev_info_get(port, &dev_info);
+ bp = (struct bnxt *)dev->data->dev_private;
+
+ if (vf_id >= dev_info.max_vfs)
+ return -EINVAL;
+
+ if (!BNXT_PF(bp)) {
+ RTE_LOG(ERR, PMD,
+ "Attempt to get VF %d stats on non-PF port %d!\n",
+ vf_id, port);
+ return -ENOTSUP;
+ }
+
+ return bnxt_hwrm_func_qstats(bp, bp->pf.first_vf_id + vf_id, stats);
+}
+
+int rte_pmd_bnxt_reset_vf_stats(uint8_t port,
+ uint16_t vf_id)
+{
+ struct rte_eth_dev *dev;
+ struct rte_eth_dev_info dev_info;
+ struct bnxt *bp;
+
+ dev = &rte_eth_devices[port];
+ rte_eth_dev_info_get(port, &dev_info);
+ bp = (struct bnxt *)dev->data->dev_private;
+
+ if (vf_id >= dev_info.max_vfs)
+ return -EINVAL;
+
+ if (!BNXT_PF(bp)) {
+ RTE_LOG(ERR, PMD,
+ "Attempt to reset VF %d stats on non-PF port %d!\n",
+ vf_id, port);
+ return -ENOTSUP;
+ }
+
+ return bnxt_hwrm_func_clr_stats(bp, bp->pf.first_vf_id + vf_id);
+}
@@ -229,4 +229,37 @@ int rte_pmd_bnxt_set_vf_mac_anti_spoof(uint8_t port, uint16_t vf, uint8_t on);
*/
int rte_pmd_bnxt_set_vf_rxmode(uint8_t port, uint16_t vf,
uint16_t rx_mask, uint8_t on);
+
+/**
+ * Get VF's statistics
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param vf_id
+ * VF on which to get.
+ * @param stats
+ * A pointer to a structure of type *rte_eth_stats* to be filled with
+ * the values of device counters supported statistics:
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port* invalid.
+ * - (-EINVAL) if bad parameter.
+ */
+
+int rte_pmd_bnxt_get_vf_stats(uint8_t port, uint16_t vf_id,
+ struct rte_eth_stats *stats);
+
+/**
+ * Clear VF's statistics
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param vf_id
+ * VF on which to get.
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port* invalid.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_bnxt_reset_vf_stats(uint8_t port, uint16_t vf_id);
#endif /* _PMD_BNXT_H_ */
@@ -9,5 +9,7 @@ DPDK_17.05 {
rte_pmd_bnxt_set_vf_vlan_stripq;
rte_pmd_bnxt_set_vf_vlan_insert;
rte_pmd_bnxt_set_vf_rxmode;
+ rte_pmd_bnxt_get_vf_stats;
+ rte_pmd_bnxt_reset_vf_stats;
};