[V2,2/2] net/hns3: fix FEC state query
Checks
Commit Message
From: "Min Hu (Connor)" <humin29@huawei.com>
As FEC is not supported below 10 Gbps,
CMD(HNS3_OPC_CONFIG_FEC_MODE) offered from
Firmware read will return fail in 10 Gbps device.
This patch will prevent read this CMD when below 10 Gbps,
as this is non-sense.
Fixes: 9bf2ea8dbc65 ("net/hns3: support FEC")
Cc: stable@dpdk.org
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
---
V1->V2:
- use the related macro instead of magic number
- fix rte_eth_device access way.
---
drivers/net/hns3/hns3_ethdev.c | 40 ++++++++++++++++++++++++++--------------
drivers/net/hns3/hns3_ethdev.h | 2 ++
2 files changed, 28 insertions(+), 14 deletions(-)
@@ -100,7 +100,7 @@ static int hns3_add_mc_addr(struct hns3_hw *hw,
static int hns3_remove_mc_addr(struct hns3_hw *hw,
struct rte_ether_addr *mac_addr);
static int hns3_restore_fec(struct hns3_hw *hw);
-static int hns3_query_dev_fec_info(struct rte_eth_dev *dev);
+static int hns3_query_dev_fec_info(struct hns3_hw *hw);
void hns3_ether_format_addr(char *buf, uint16_t size,
const struct rte_ether_addr *ether_addr)
@@ -3010,13 +3010,6 @@ hns3_get_capability(struct hns3_hw *hw)
device_id == HNS3_DEV_ID_200G_RDMA)
hns3_set_bit(hw->capability, HNS3_DEV_SUPPORT_DCB_B, 1);
- ret = hns3_query_dev_fec_info(eth_dev);
- if (ret) {
- PMD_INIT_LOG(ERR,
- "failed to query FEC information, ret = %d", ret);
- return ret;
- }
-
/* Get PCI revision id */
ret = rte_pci_read_config(pci_dev, &revision, HNS3_PCI_REVISION_ID_LEN,
HNS3_PCI_REVISION_ID);
@@ -3148,8 +3141,15 @@ hns3_get_configuration(struct hns3_hw *hw)
}
ret = hns3_get_board_configuration(hw);
- if (ret)
+ if (ret) {
PMD_INIT_LOG(ERR, "failed to get board configuration: %d", ret);
+ return ret;
+ }
+
+ ret = hns3_query_dev_fec_info(hw);
+ if (ret)
+ PMD_INIT_LOG(ERR,
+ "failed to query FEC information, ret = %d", ret);
return ret;
}
@@ -5797,6 +5797,16 @@ get_current_fec_auto_state(struct hns3_hw *hw, uint8_t *state)
struct hns3_cmd_desc desc;
int ret;
+ /*
+ * CMD(HNS3_OPC_CONFIG_FEC_MODE) read is not supported
+ * in device of link speed
+ * below 10 Gbps.
+ */
+ if (hw->mac.link_speed < ETH_SPEED_NUM_10G) {
+ *state = 0;
+ return 0;
+ }
+
hns3_cmd_setup_basic_desc(&desc, HNS3_OPC_CONFIG_FEC_MODE, true);
req = (struct hns3_config_fec_cmd *)desc.data;
ret = hns3_cmd_send(hw, &desc, 1);
@@ -6003,14 +6013,14 @@ hns3_restore_fec(struct hns3_hw *hw)
}
static int
-hns3_query_dev_fec_info(struct rte_eth_dev *dev)
+hns3_query_dev_fec_info(struct hns3_hw *hw)
{
- struct hns3_adapter *hns = dev->data->dev_private;
- struct hns3_hw *hw = HNS3_DEV_PRIVATE_TO_HW(hns);
- struct hns3_pf *pf = &hns->pf;
+ struct hns3_adapter *hns = HNS3_DEV_HW_TO_ADAPTER(hw);
+ struct hns3_pf *pf = HNS3_DEV_PRIVATE_TO_PF(hns);
+ struct rte_eth_dev *eth_dev = hns->eth_dev;
int ret;
- ret = hns3_fec_get(dev, &pf->fec_mode);
+ ret = hns3_fec_get(eth_dev, &pf->fec_mode);
if (ret)
hns3_err(hw, "query device FEC info failed, ret = %d", ret);
@@ -6096,6 +6106,8 @@ hns3_dev_init(struct rte_eth_dev *eth_dev)
PMD_INIT_FUNC_TRACE();
+ hns->eth_dev = eth_dev;
+
eth_dev->process_private = (struct hns3_process_private *)
rte_zmalloc_socket("hns3_filter_list",
sizeof(struct hns3_process_private),
@@ -743,6 +743,8 @@ struct hns3_adapter {
struct hns3_vf vf;
};
+ struct rte_eth_dev *eth_dev;
+
bool rx_simple_allowed;
bool rx_vec_allowed;
bool tx_simple_allowed;