diff mbox series

[5/8] net/hns3: fix configurations of port-level scheduling rate

Message ID 1604327899-60126-6-git-send-email-oulijun@huawei.com (mailing list archive)
State Accepted, archived
Delegated to: Ferruh Yigit
Headers
Series misc fixes for hns3 |

Checks

Context Check Description
ci/checkpatch success coding style OK

Commit Message

Lijun Ou Nov. 2, 2020, 2:38 p.m. UTC 
  From: Huisong Li <lihuisong@huawei.com>

Scheduling rate of port-level in hns3 PF driver configured to
hardware is obtained from firmware, which determines the
bandwidth capability of the port. The rate in firmware is
generally configured with the maximum value for network engine
supporting multiple rates, such as 10G and 25G. It may cause
the following issues:
1) When a 10G optical module is used on the network engine,
scheduling rate of this port will also be configured to hardware
with 25G. However, the MAC rate of this port is 10G. In this case,
it is unreasonable that the port scheduling rate is different
from the MAC rate.
2) If default speed in firmware is not the maximum value,
the 25G port may not reach the capability of the port.

Therefore, we fix configurations of port-level scheduling rate
according to updating of MAC link speed.

Fixes: 59fad0f32135 ("net/hns3: support link update operation")
Cc: stable@dpdk.org

Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
---
 drivers/net/hns3/hns3_dcb.c    | 2 +-
 drivers/net/hns3/hns3_dcb.h    | 1 +
 drivers/net/hns3/hns3_ethdev.c | 8 ++++++++
 3 files changed, 10 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/net/hns3/hns3_dcb.c b/drivers/net/hns3/hns3_dcb.c
index 27ae014..ae8d826 100644
--- a/drivers/net/hns3/hns3_dcb.c
+++ b/drivers/net/hns3/hns3_dcb.c
@@ -336,7 +336,7 @@  hns3_dcb_get_shapping_para(uint8_t ir_b, uint8_t ir_u, uint8_t ir_s,
 	return shapping_para;
 }
 
-static int
+int
 hns3_dcb_port_shaper_cfg(struct hns3_hw *hw)
 {
 	struct hns3_port_shapping_cmd *shap_cfg_cmd;
diff --git a/drivers/net/hns3/hns3_dcb.h b/drivers/net/hns3/hns3_dcb.h
index 39ff332..7ab9093 100644
--- a/drivers/net/hns3/hns3_dcb.h
+++ b/drivers/net/hns3/hns3_dcb.h
@@ -204,5 +204,6 @@  int hns3_queue_to_tc_mapping(struct hns3_hw *hw, uint16_t nb_rx_q,
 			     uint16_t nb_tx_q);
 
 int hns3_dcb_cfg_update(struct hns3_adapter *hns);
+int hns3_dcb_port_shaper_cfg(struct hns3_hw *hw);
 
 #endif /* _HNS3_DCB_H_ */
diff --git a/drivers/net/hns3/hns3_ethdev.c b/drivers/net/hns3/hns3_ethdev.c
index 6b4be76..1e382f1 100644
--- a/drivers/net/hns3/hns3_ethdev.c
+++ b/drivers/net/hns3/hns3_ethdev.c
@@ -4332,6 +4332,7 @@  static int
 hns3_cfg_mac_speed_dup(struct hns3_hw *hw, uint32_t speed, uint8_t duplex)
 {
 	struct hns3_mac *mac = &hw->mac;
+	uint32_t cur_speed = mac->link_speed;
 	int ret;
 
 	duplex = hns3_check_speed_dup(duplex, speed);
@@ -4343,6 +4344,13 @@  hns3_cfg_mac_speed_dup(struct hns3_hw *hw, uint32_t speed, uint8_t duplex)
 		return ret;
 
 	mac->link_speed = speed;
+	ret = hns3_dcb_port_shaper_cfg(hw);
+	if (ret) {
+		hns3_err(hw, "failed to configure port shaper, ret = %d.", ret);
+		mac->link_speed = cur_speed;
+		return ret;
+	}
+
 	mac->link_duplex = duplex;
 
 	return 0;