@@ -15,6 +15,7 @@ SRCS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += mlx5_glue.c
endif
SRCS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += mlx5_devx_cmds.c
SRCS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += mlx5_common.c
+SRCS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += mlx5_nl.c
ifeq ($(CONFIG_RTE_IBVERBS_LINK_DLOPEN),y)
INSTALL-$(CONFIG_RTE_LIBRTE_MLX5_PMD)-lib += $(LIB_GLUE)
@@ -41,7 +42,7 @@ else
LDLIBS += -libverbs -lmlx5
endif
-LDLIBS += -lrte_eal -lrte_pci -lrte_kvargs
+LDLIBS += -lrte_eal -lrte_pci -lrte_kvargs -lrte_net
# A few warnings cannot be avoided in external headers.
CFLAGS += -Wno-error=cast-qual -DNDEBUG -UPEDANTIC
@@ -42,6 +42,7 @@ if build
sources = files(
'mlx5_devx_cmds.c',
'mlx5_common.c',
+ 'mlx5_nl.c',
)
if not pmd_dlopen
sources += files('mlx5_glue.c')
@@ -107,6 +107,61 @@
return ret;
}
+/**
+ * Extract port name, as a number, from sysfs or netlink information.
+ *
+ * @param[in] port_name_in
+ * String representing the port name.
+ * @param[out] port_info_out
+ * Port information, including port name as a number and port name
+ * type if recognized
+ *
+ * @return
+ * port_name field set according to recognized name format.
+ */
+void
+mlx5_translate_port_name(const char *port_name_in,
+ struct mlx5_switch_info *port_info_out)
+{
+ char pf_c1, pf_c2, vf_c1, vf_c2;
+ char *end;
+ int sc_items;
+
+ /*
+ * Check for port-name as a string of the form pf0vf0
+ * (support kernel ver >= 5.0 or OFED ver >= 4.6).
+ */
+ sc_items = sscanf(port_name_in, "%c%c%d%c%c%d",
+ &pf_c1, &pf_c2, &port_info_out->pf_num,
+ &vf_c1, &vf_c2, &port_info_out->port_name);
+ if (sc_items == 6 &&
+ pf_c1 == 'p' && pf_c2 == 'f' &&
+ vf_c1 == 'v' && vf_c2 == 'f') {
+ port_info_out->name_type = MLX5_PHYS_PORT_NAME_TYPE_PFVF;
+ return;
+ }
+ /*
+ * Check for port-name as a string of the form p0
+ * (support kernel ver >= 5.0, or OFED ver >= 4.6).
+ */
+ sc_items = sscanf(port_name_in, "%c%d",
+ &pf_c1, &port_info_out->port_name);
+ if (sc_items == 2 && pf_c1 == 'p') {
+ port_info_out->name_type = MLX5_PHYS_PORT_NAME_TYPE_UPLINK;
+ return;
+ }
+ /* Check for port-name as a number (support kernel ver < 5.0 */
+ errno = 0;
+ port_info_out->port_name = strtol(port_name_in, &end, 0);
+ if (!errno &&
+ (size_t)(end - port_name_in) == strlen(port_name_in)) {
+ port_info_out->name_type = MLX5_PHYS_PORT_NAME_TYPE_LEGACY;
+ return;
+ }
+ port_info_out->name_type = MLX5_PHYS_PORT_NAME_TYPE_UNKNOWN;
+ return;
+}
+
#ifdef RTE_IBVERBS_LINK_DLOPEN
/**
@@ -18,6 +18,35 @@
/*
+ * Compilation workaround for PPC64 when AltiVec is fully enabled, e.g. std=c11.
+ * Otherwise there would be a type conflict between stdbool and altivec.
+ */
+#if defined(__PPC64__) && !defined(__APPLE_ALTIVEC__)
+#undef bool
+/* redefine as in stdbool.h */
+#define bool _Bool
+#endif
+
+/* Bit-field manipulation. */
+#define BITFIELD_DECLARE(bf, type, size) \
+ type bf[(((size_t)(size) / (sizeof(type) * CHAR_BIT)) + \
+ !!((size_t)(size) % (sizeof(type) * CHAR_BIT)))]
+#define BITFIELD_DEFINE(bf, type, size) \
+ BITFIELD_DECLARE((bf), type, (size)) = { 0 }
+#define BITFIELD_SET(bf, b) \
+ (assert((size_t)(b) < (sizeof(bf) * CHAR_BIT)), \
+ (void)((bf)[((b) / (sizeof((bf)[0]) * CHAR_BIT))] |= \
+ ((size_t)1 << ((b) % (sizeof((bf)[0]) * CHAR_BIT)))))
+#define BITFIELD_RESET(bf, b) \
+ (assert((size_t)(b) < (sizeof(bf) * CHAR_BIT)), \
+ (void)((bf)[((b) / (sizeof((bf)[0]) * CHAR_BIT))] &= \
+ ~((size_t)1 << ((b) % (sizeof((bf)[0]) * CHAR_BIT)))))
+#define BITFIELD_ISSET(bf, b) \
+ (assert((size_t)(b) < (sizeof(bf) * CHAR_BIT)), \
+ !!(((bf)[((b) / (sizeof((bf)[0]) * CHAR_BIT))] & \
+ ((size_t)1 << ((b) % (sizeof((bf)[0]) * CHAR_BIT))))))
+
+/*
* Helper macros to work around __VA_ARGS__ limitations in a C99 compliant
* manner.
*/
@@ -112,6 +141,33 @@ enum {
PCI_DEVICE_ID_MELLANOX_CONNECTX6DXVF = 0x101e,
};
+/* Maximum number of simultaneous unicast MAC addresses. */
+#define MLX5_MAX_UC_MAC_ADDRESSES 128
+/* Maximum number of simultaneous Multicast MAC addresses. */
+#define MLX5_MAX_MC_MAC_ADDRESSES 128
+/* Maximum number of simultaneous MAC addresses. */
+#define MLX5_MAX_MAC_ADDRESSES \
+ (MLX5_MAX_UC_MAC_ADDRESSES + MLX5_MAX_MC_MAC_ADDRESSES)
+
+/* Recognized Infiniband device physical port name types. */
+enum mlx5_nl_phys_port_name_type {
+ MLX5_PHYS_PORT_NAME_TYPE_NOTSET = 0, /* Not set. */
+ MLX5_PHYS_PORT_NAME_TYPE_LEGACY, /* before kernel ver < 5.0 */
+ MLX5_PHYS_PORT_NAME_TYPE_UPLINK, /* p0, kernel ver >= 5.0 */
+ MLX5_PHYS_PORT_NAME_TYPE_PFVF, /* pf0vf0, kernel ver >= 5.0 */
+ MLX5_PHYS_PORT_NAME_TYPE_UNKNOWN, /* Unrecognized. */
+};
+
+/** Switch information returned by mlx5_nl_switch_info(). */
+struct mlx5_switch_info {
+ uint32_t master:1; /**< Master device. */
+ uint32_t representor:1; /**< Representor device. */
+ enum mlx5_nl_phys_port_name_type name_type; /** < Port name type. */
+ int32_t pf_num; /**< PF number (valid for pfxvfx format only). */
+ int32_t port_name; /**< Representor port name. */
+ uint64_t switch_id; /**< Switch identifier. */
+};
+
/* CQE status. */
enum mlx5_cqe_status {
MLX5_CQE_STATUS_SW_OWN = -1,
@@ -152,5 +208,7 @@ enum mlx5_cqe_status {
int mlx5_dev_to_pci_addr(const char *dev_path, struct rte_pci_addr *pci_addr);
int mlx5_vdpa_mode_selected(struct rte_devargs *devargs);
+void mlx5_translate_port_name(const char *port_name_in,
+ struct mlx5_switch_info *port_info_out);
#endif /* RTE_PMD_MLX5_COMMON_H_ */
new file mode 100644
@@ -0,0 +1,1337 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright 2018 6WIND S.A.
+ * Copyright 2018 Mellanox Technologies, Ltd
+ */
+
+#include <errno.h>
+#include <linux/if_link.h>
+#include <linux/rtnetlink.h>
+#include <net/if.h>
+#include <rdma/rdma_netlink.h>
+#include <stdbool.h>
+#include <stdint.h>
+#include <stdlib.h>
+#include <stdalign.h>
+#include <string.h>
+#include <sys/socket.h>
+#include <unistd.h>
+#include <stdbool.h>
+
+#include <rte_errno.h>
+#include <rte_atomic.h>
+
+#include "mlx5_nl.h"
+#include "mlx5_common_utils.h"
+
+/* Size of the buffer to receive kernel messages */
+#define MLX5_NL_BUF_SIZE (32 * 1024)
+/* Send buffer size for the Netlink socket */
+#define MLX5_SEND_BUF_SIZE 32768
+/* Receive buffer size for the Netlink socket */
+#define MLX5_RECV_BUF_SIZE 32768
+
+/** Parameters of VLAN devices created by driver. */
+#define MLX5_VMWA_VLAN_DEVICE_PFX "evmlx"
+/*
+ * Define NDA_RTA as defined in iproute2 sources.
+ *
+ * see in iproute2 sources file include/libnetlink.h
+ */
+#ifndef MLX5_NDA_RTA
+#define MLX5_NDA_RTA(r) \
+ ((struct rtattr *)(((char *)(r)) + NLMSG_ALIGN(sizeof(struct ndmsg))))
+#endif
+/*
+ * Define NLMSG_TAIL as defined in iproute2 sources.
+ *
+ * see in iproute2 sources file include/libnetlink.h
+ */
+#ifndef NLMSG_TAIL
+#define NLMSG_TAIL(nmsg) \
+ ((struct rtattr *)(((char *)(nmsg)) + NLMSG_ALIGN((nmsg)->nlmsg_len)))
+#endif
+/*
+ * The following definitions are normally found in rdma/rdma_netlink.h,
+ * however they are so recent that most systems do not expose them yet.
+ */
+#ifndef HAVE_RDMA_NL_NLDEV
+#define RDMA_NL_NLDEV 5
+#endif
+#ifndef HAVE_RDMA_NLDEV_CMD_GET
+#define RDMA_NLDEV_CMD_GET 1
+#endif
+#ifndef HAVE_RDMA_NLDEV_CMD_PORT_GET
+#define RDMA_NLDEV_CMD_PORT_GET 5
+#endif
+#ifndef HAVE_RDMA_NLDEV_ATTR_DEV_INDEX
+#define RDMA_NLDEV_ATTR_DEV_INDEX 1
+#endif
+#ifndef HAVE_RDMA_NLDEV_ATTR_DEV_NAME
+#define RDMA_NLDEV_ATTR_DEV_NAME 2
+#endif
+#ifndef HAVE_RDMA_NLDEV_ATTR_PORT_INDEX
+#define RDMA_NLDEV_ATTR_PORT_INDEX 3
+#endif
+#ifndef HAVE_RDMA_NLDEV_ATTR_NDEV_INDEX
+#define RDMA_NLDEV_ATTR_NDEV_INDEX 50
+#endif
+
+/* These are normally found in linux/if_link.h. */
+#ifndef HAVE_IFLA_NUM_VF
+#define IFLA_NUM_VF 21
+#endif
+#ifndef HAVE_IFLA_EXT_MASK
+#define IFLA_EXT_MASK 29
+#endif
+#ifndef HAVE_IFLA_PHYS_SWITCH_ID
+#define IFLA_PHYS_SWITCH_ID 36
+#endif
+#ifndef HAVE_IFLA_PHYS_PORT_NAME
+#define IFLA_PHYS_PORT_NAME 38
+#endif
+
+/* Add/remove MAC address through Netlink */
+struct mlx5_nl_mac_addr {
+ struct rte_ether_addr (*mac)[];
+ /**< MAC address handled by the device. */
+ int mac_n; /**< Number of addresses in the array. */
+};
+
+#define MLX5_NL_CMD_GET_IB_NAME (1 << 0)
+#define MLX5_NL_CMD_GET_IB_INDEX (1 << 1)
+#define MLX5_NL_CMD_GET_NET_INDEX (1 << 2)
+#define MLX5_NL_CMD_GET_PORT_INDEX (1 << 3)
+
+/** Data structure used by mlx5_nl_cmdget_cb(). */
+struct mlx5_nl_ifindex_data {
+ const char *name; /**< IB device name (in). */
+ uint32_t flags; /**< found attribute flags (out). */
+ uint32_t ibindex; /**< IB device index (out). */
+ uint32_t ifindex; /**< Network interface index (out). */
+ uint32_t portnum; /**< IB device max port number (out). */
+};
+
+rte_atomic32_t atomic_sn = RTE_ATOMIC32_INIT(0);
+
+/* Generate Netlink sequence number. */
+#define MLX5_NL_SN_GENERATE ((uint32_t)rte_atomic32_add_return(&atomic_sn, 1))
+
+/**
+ * Opens a Netlink socket.
+ *
+ * @param protocol
+ * Netlink protocol (e.g. NETLINK_ROUTE, NETLINK_RDMA).
+ *
+ * @return
+ * A file descriptor on success, a negative errno value otherwise and
+ * rte_errno is set.
+ */
+int
+mlx5_nl_init(int protocol)
+{
+ int fd;
+ int sndbuf_size = MLX5_SEND_BUF_SIZE;
+ int rcvbuf_size = MLX5_RECV_BUF_SIZE;
+ struct sockaddr_nl local = {
+ .nl_family = AF_NETLINK,
+ };
+ int ret;
+
+ fd = socket(AF_NETLINK, SOCK_RAW | SOCK_CLOEXEC, protocol);
+ if (fd == -1) {
+ rte_errno = errno;
+ return -rte_errno;
+ }
+ ret = setsockopt(fd, SOL_SOCKET, SO_SNDBUF, &sndbuf_size, sizeof(int));
+ if (ret == -1) {
+ rte_errno = errno;
+ goto error;
+ }
+ ret = setsockopt(fd, SOL_SOCKET, SO_RCVBUF, &rcvbuf_size, sizeof(int));
+ if (ret == -1) {
+ rte_errno = errno;
+ goto error;
+ }
+ ret = bind(fd, (struct sockaddr *)&local, sizeof(local));
+ if (ret == -1) {
+ rte_errno = errno;
+ goto error;
+ }
+ return fd;
+error:
+ close(fd);
+ return -rte_errno;
+}
+
+/**
+ * Send a request message to the kernel on the Netlink socket.
+ *
+ * @param[in] nlsk_fd
+ * Netlink socket file descriptor.
+ * @param[in] nh
+ * The Netlink message send to the kernel.
+ * @param[in] ssn
+ * Sequence number.
+ * @param[in] req
+ * Pointer to the request structure.
+ * @param[in] len
+ * Length of the request in bytes.
+ *
+ * @return
+ * The number of sent bytes on success, a negative errno value otherwise and
+ * rte_errno is set.
+ */
+static int
+mlx5_nl_request(int nlsk_fd, struct nlmsghdr *nh, uint32_t sn, void *req,
+ int len)
+{
+ struct sockaddr_nl sa = {
+ .nl_family = AF_NETLINK,
+ };
+ struct iovec iov[2] = {
+ { .iov_base = nh, .iov_len = sizeof(*nh), },
+ { .iov_base = req, .iov_len = len, },
+ };
+ struct msghdr msg = {
+ .msg_name = &sa,
+ .msg_namelen = sizeof(sa),
+ .msg_iov = iov,
+ .msg_iovlen = 2,
+ };
+ int send_bytes;
+
+ nh->nlmsg_pid = 0; /* communication with the kernel uses pid 0 */
+ nh->nlmsg_seq = sn;
+ send_bytes = sendmsg(nlsk_fd, &msg, 0);
+ if (send_bytes < 0) {
+ rte_errno = errno;
+ return -rte_errno;
+ }
+ return send_bytes;
+}
+
+/**
+ * Send a message to the kernel on the Netlink socket.
+ *
+ * @param[in] nlsk_fd
+ * The Netlink socket file descriptor used for communication.
+ * @param[in] nh
+ * The Netlink message send to the kernel.
+ * @param[in] sn
+ * Sequence number.
+ *
+ * @return
+ * The number of sent bytes on success, a negative errno value otherwise and
+ * rte_errno is set.
+ */
+static int
+mlx5_nl_send(int nlsk_fd, struct nlmsghdr *nh, uint32_t sn)
+{
+ struct sockaddr_nl sa = {
+ .nl_family = AF_NETLINK,
+ };
+ struct iovec iov = {
+ .iov_base = nh,
+ .iov_len = nh->nlmsg_len,
+ };
+ struct msghdr msg = {
+ .msg_name = &sa,
+ .msg_namelen = sizeof(sa),
+ .msg_iov = &iov,
+ .msg_iovlen = 1,
+ };
+ int send_bytes;
+
+ nh->nlmsg_pid = 0; /* communication with the kernel uses pid 0 */
+ nh->nlmsg_seq = sn;
+ send_bytes = sendmsg(nlsk_fd, &msg, 0);
+ if (send_bytes < 0) {
+ rte_errno = errno;
+ return -rte_errno;
+ }
+ return send_bytes;
+}
+
+/**
+ * Receive a message from the kernel on the Netlink socket, following
+ * mlx5_nl_send().
+ *
+ * @param[in] nlsk_fd
+ * The Netlink socket file descriptor used for communication.
+ * @param[in] sn
+ * Sequence number.
+ * @param[in] cb
+ * The callback function to call for each Netlink message received.
+ * @param[in, out] arg
+ * Custom arguments for the callback.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+mlx5_nl_recv(int nlsk_fd, uint32_t sn, int (*cb)(struct nlmsghdr *, void *arg),
+ void *arg)
+{
+ struct sockaddr_nl sa;
+ char buf[MLX5_RECV_BUF_SIZE];
+ struct iovec iov = {
+ .iov_base = buf,
+ .iov_len = sizeof(buf),
+ };
+ struct msghdr msg = {
+ .msg_name = &sa,
+ .msg_namelen = sizeof(sa),
+ .msg_iov = &iov,
+ /* One message at a time */
+ .msg_iovlen = 1,
+ };
+ int multipart = 0;
+ int ret = 0;
+
+ do {
+ struct nlmsghdr *nh;
+ int recv_bytes = 0;
+
+ do {
+ recv_bytes = recvmsg(nlsk_fd, &msg, 0);
+ if (recv_bytes == -1) {
+ rte_errno = errno;
+ return -rte_errno;
+ }
+ nh = (struct nlmsghdr *)buf;
+ } while (nh->nlmsg_seq != sn);
+ for (;
+ NLMSG_OK(nh, (unsigned int)recv_bytes);
+ nh = NLMSG_NEXT(nh, recv_bytes)) {
+ if (nh->nlmsg_type == NLMSG_ERROR) {
+ struct nlmsgerr *err_data = NLMSG_DATA(nh);
+
+ if (err_data->error < 0) {
+ rte_errno = -err_data->error;
+ return -rte_errno;
+ }
+ /* Ack message. */
+ return 0;
+ }
+ /* Multi-part msgs and their trailing DONE message. */
+ if (nh->nlmsg_flags & NLM_F_MULTI) {
+ if (nh->nlmsg_type == NLMSG_DONE)
+ return 0;
+ multipart = 1;
+ }
+ if (cb) {
+ ret = cb(nh, arg);
+ if (ret < 0)
+ return ret;
+ }
+ }
+ } while (multipart);
+ return ret;
+}
+
+/**
+ * Parse Netlink message to retrieve the bridge MAC address.
+ *
+ * @param nh
+ * Pointer to Netlink Message Header.
+ * @param arg
+ * PMD data register with this callback.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+mlx5_nl_mac_addr_cb(struct nlmsghdr *nh, void *arg)
+{
+ struct mlx5_nl_mac_addr *data = arg;
+ struct ndmsg *r = NLMSG_DATA(nh);
+ struct rtattr *attribute;
+ int len;
+
+ len = nh->nlmsg_len - NLMSG_LENGTH(sizeof(*r));
+ for (attribute = MLX5_NDA_RTA(r);
+ RTA_OK(attribute, len);
+ attribute = RTA_NEXT(attribute, len)) {
+ if (attribute->rta_type == NDA_LLADDR) {
+ if (data->mac_n == MLX5_MAX_MAC_ADDRESSES) {
+ DRV_LOG(WARNING,
+ "not enough room to finalize the"
+ " request");
+ rte_errno = ENOMEM;
+ return -rte_errno;
+ }
+#ifndef NDEBUG
+ char m[18];
+
+ rte_ether_format_addr(m, 18, RTA_DATA(attribute));
+ DRV_LOG(DEBUG, "bridge MAC address %s", m);
+#endif
+ memcpy(&(*data->mac)[data->mac_n++],
+ RTA_DATA(attribute), RTE_ETHER_ADDR_LEN);
+ }
+ }
+ return 0;
+}
+
+/**
+ * Get bridge MAC addresses.
+ *
+ * @param[in] nlsk_fd
+ * Netlink socket file descriptor.
+ * @param[in] iface_idx
+ * Net device interface index.
+ * @param mac[out]
+ * Pointer to the array table of MAC addresses to fill.
+ * Its size should be of MLX5_MAX_MAC_ADDRESSES.
+ * @param mac_n[out]
+ * Number of entries filled in MAC array.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+mlx5_nl_mac_addr_list(int nlsk_fd, unsigned int iface_idx,
+ struct rte_ether_addr (*mac)[], int *mac_n)
+{
+ struct {
+ struct nlmsghdr hdr;
+ struct ifinfomsg ifm;
+ } req = {
+ .hdr = {
+ .nlmsg_len = NLMSG_LENGTH(sizeof(struct ifinfomsg)),
+ .nlmsg_type = RTM_GETNEIGH,
+ .nlmsg_flags = NLM_F_DUMP | NLM_F_REQUEST,
+ },
+ .ifm = {
+ .ifi_family = PF_BRIDGE,
+ .ifi_index = iface_idx,
+ },
+ };
+ struct mlx5_nl_mac_addr data = {
+ .mac = mac,
+ .mac_n = 0,
+ };
+ uint32_t sn = MLX5_NL_SN_GENERATE;
+ int ret;
+
+ if (nlsk_fd == -1)
+ return 0;
+ ret = mlx5_nl_request(nlsk_fd, &req.hdr, sn, &req.ifm,
+ sizeof(struct ifinfomsg));
+ if (ret < 0)
+ goto error;
+ ret = mlx5_nl_recv(nlsk_fd, sn, mlx5_nl_mac_addr_cb, &data);
+ if (ret < 0)
+ goto error;
+ *mac_n = data.mac_n;
+ return 0;
+error:
+ DRV_LOG(DEBUG, "Interface %u cannot retrieve MAC address list %s",
+ iface_idx, strerror(rte_errno));
+ return -rte_errno;
+}
+
+/**
+ * Modify the MAC address neighbour table with Netlink.
+ *
+ * @param[in] nlsk_fd
+ * Netlink socket file descriptor.
+ * @param[in] iface_idx
+ * Net device interface index.
+ * @param mac
+ * MAC address to consider.
+ * @param add
+ * 1 to add the MAC address, 0 to remove the MAC address.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+mlx5_nl_mac_addr_modify(int nlsk_fd, unsigned int iface_idx,
+ struct rte_ether_addr *mac, int add)
+{
+ struct {
+ struct nlmsghdr hdr;
+ struct ndmsg ndm;
+ struct rtattr rta;
+ uint8_t buffer[RTE_ETHER_ADDR_LEN];
+ } req = {
+ .hdr = {
+ .nlmsg_len = NLMSG_LENGTH(sizeof(struct ndmsg)),
+ .nlmsg_flags = NLM_F_REQUEST | NLM_F_CREATE |
+ NLM_F_EXCL | NLM_F_ACK,
+ .nlmsg_type = add ? RTM_NEWNEIGH : RTM_DELNEIGH,
+ },
+ .ndm = {
+ .ndm_family = PF_BRIDGE,
+ .ndm_state = NUD_NOARP | NUD_PERMANENT,
+ .ndm_ifindex = iface_idx,
+ .ndm_flags = NTF_SELF,
+ },
+ .rta = {
+ .rta_type = NDA_LLADDR,
+ .rta_len = RTA_LENGTH(RTE_ETHER_ADDR_LEN),
+ },
+ };
+ uint32_t sn = MLX5_NL_SN_GENERATE;
+ int ret;
+
+ if (nlsk_fd == -1)
+ return 0;
+ memcpy(RTA_DATA(&req.rta), mac, RTE_ETHER_ADDR_LEN);
+ req.hdr.nlmsg_len = NLMSG_ALIGN(req.hdr.nlmsg_len) +
+ RTA_ALIGN(req.rta.rta_len);
+ ret = mlx5_nl_send(nlsk_fd, &req.hdr, sn);
+ if (ret < 0)
+ goto error;
+ ret = mlx5_nl_recv(nlsk_fd, sn, NULL, NULL);
+ if (ret < 0)
+ goto error;
+ return 0;
+error:
+ DRV_LOG(DEBUG,
+ "Interface %u cannot %s MAC address"
+ " %02X:%02X:%02X:%02X:%02X:%02X %s",
+ iface_idx,
+ add ? "add" : "remove",
+ mac->addr_bytes[0], mac->addr_bytes[1],
+ mac->addr_bytes[2], mac->addr_bytes[3],
+ mac->addr_bytes[4], mac->addr_bytes[5],
+ strerror(rte_errno));
+ return -rte_errno;
+}
+
+/**
+ * Modify the VF MAC address neighbour table with Netlink.
+ *
+ * @param[in] nlsk_fd
+ * Netlink socket file descriptor.
+ * @param[in] iface_idx
+ * Net device interface index.
+ * @param mac
+ * MAC address to consider.
+ * @param vf_index
+ * VF index.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_nl_vf_mac_addr_modify(int nlsk_fd, unsigned int iface_idx,
+ struct rte_ether_addr *mac, int vf_index)
+{
+ int ret;
+ struct {
+ struct nlmsghdr hdr;
+ struct ifinfomsg ifm;
+ struct rtattr vf_list_rta;
+ struct rtattr vf_info_rta;
+ struct rtattr vf_mac_rta;
+ struct ifla_vf_mac ivm;
+ } req = {
+ .hdr = {
+ .nlmsg_len = NLMSG_LENGTH(sizeof(struct ifinfomsg)),
+ .nlmsg_flags = NLM_F_REQUEST | NLM_F_ACK,
+ .nlmsg_type = RTM_BASE,
+ },
+ .ifm = {
+ .ifi_index = iface_idx,
+ },
+ .vf_list_rta = {
+ .rta_type = IFLA_VFINFO_LIST,
+ .rta_len = RTA_ALIGN(RTA_LENGTH(0)),
+ },
+ .vf_info_rta = {
+ .rta_type = IFLA_VF_INFO,
+ .rta_len = RTA_ALIGN(RTA_LENGTH(0)),
+ },
+ .vf_mac_rta = {
+ .rta_type = IFLA_VF_MAC,
+ },
+ };
+ struct ifla_vf_mac ivm = {
+ .vf = vf_index,
+ };
+ uint32_t sn = MLX5_NL_SN_GENERATE;
+
+ memcpy(&ivm.mac, mac, RTE_ETHER_ADDR_LEN);
+ memcpy(RTA_DATA(&req.vf_mac_rta), &ivm, sizeof(ivm));
+
+ req.vf_mac_rta.rta_len = RTA_LENGTH(sizeof(ivm));
+ req.hdr.nlmsg_len = NLMSG_ALIGN(req.hdr.nlmsg_len) +
+ RTA_ALIGN(req.vf_list_rta.rta_len) +
+ RTA_ALIGN(req.vf_info_rta.rta_len) +
+ RTA_ALIGN(req.vf_mac_rta.rta_len);
+ req.vf_list_rta.rta_len = RTE_PTR_DIFF(NLMSG_TAIL(&req.hdr),
+ &req.vf_list_rta);
+ req.vf_info_rta.rta_len = RTE_PTR_DIFF(NLMSG_TAIL(&req.hdr),
+ &req.vf_info_rta);
+
+ if (nlsk_fd < 0)
+ return -1;
+ ret = mlx5_nl_send(nlsk_fd, &req.hdr, sn);
+ if (ret < 0)
+ goto error;
+ ret = mlx5_nl_recv(nlsk_fd, sn, NULL, NULL);
+ if (ret < 0)
+ goto error;
+ return 0;
+error:
+ DRV_LOG(ERR,
+ "representor %u cannot set VF MAC address "
+ "%02X:%02X:%02X:%02X:%02X:%02X : %s",
+ vf_index,
+ mac->addr_bytes[0], mac->addr_bytes[1],
+ mac->addr_bytes[2], mac->addr_bytes[3],
+ mac->addr_bytes[4], mac->addr_bytes[5],
+ strerror(rte_errno));
+ return -rte_errno;
+}
+
+/**
+ * Add a MAC address.
+ *
+ * @param[in] nlsk_fd
+ * Netlink socket file descriptor.
+ * @param[in] iface_idx
+ * Net device interface index.
+ * @param mac_own
+ * BITFIELD_DECLARE array to store the mac.
+ * @param mac
+ * MAC address to register.
+ * @param index
+ * MAC address index.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_nl_mac_addr_add(int nlsk_fd, unsigned int iface_idx,
+ uint64_t *mac_own, struct rte_ether_addr *mac,
+ uint32_t index)
+{
+ int ret;
+
+ ret = mlx5_nl_mac_addr_modify(nlsk_fd, iface_idx, mac, 1);
+ if (!ret)
+ BITFIELD_SET(mac_own, index);
+ if (ret == -EEXIST)
+ return 0;
+ return ret;
+}
+
+/**
+ * Remove a MAC address.
+ *
+ * @param[in] nlsk_fd
+ * Netlink socket file descriptor.
+ * @param[in] iface_idx
+ * Net device interface index.
+ * @param mac_own
+ * BITFIELD_DECLARE array to store the mac.
+ * @param mac
+ * MAC address to remove.
+ * @param index
+ * MAC address index.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_nl_mac_addr_remove(int nlsk_fd, unsigned int iface_idx, uint64_t *mac_own,
+ struct rte_ether_addr *mac, uint32_t index)
+{
+ BITFIELD_RESET(mac_own, index);
+ return mlx5_nl_mac_addr_modify(nlsk_fd, iface_idx, mac, 0);
+}
+
+/**
+ * Synchronize Netlink bridge table to the internal table.
+ *
+ * @param[in] nlsk_fd
+ * Netlink socket file descriptor.
+ * @param[in] iface_idx
+ * Net device interface index.
+ * @param mac_addrs
+ * Mac addresses array to sync.
+ * @param n
+ * @p mac_addrs array size.
+ */
+void
+mlx5_nl_mac_addr_sync(int nlsk_fd, unsigned int iface_idx,
+ struct rte_ether_addr *mac_addrs, int n)
+{
+ struct rte_ether_addr macs[n];
+ int macs_n = 0;
+ int i;
+ int ret;
+
+ ret = mlx5_nl_mac_addr_list(nlsk_fd, iface_idx, &macs, &macs_n);
+ if (ret)
+ return;
+ for (i = 0; i != macs_n; ++i) {
+ int j;
+
+ /* Verify the address is not in the array yet. */
+ for (j = 0; j != n; ++j)
+ if (rte_is_same_ether_addr(&macs[i], &mac_addrs[j]))
+ break;
+ if (j != n)
+ continue;
+ /* Find the first entry available. */
+ for (j = 0; j != n; ++j) {
+ if (rte_is_zero_ether_addr(&mac_addrs[j])) {
+ mac_addrs[j] = macs[i];
+ break;
+ }
+ }
+ }
+}
+
+/**
+ * Flush all added MAC addresses.
+ *
+ * @param[in] nlsk_fd
+ * Netlink socket file descriptor.
+ * @param[in] iface_idx
+ * Net device interface index.
+ * @param[in] mac_addrs
+ * Mac addresses array to flush.
+ * @param n
+ * @p mac_addrs array size.
+ * @param mac_own
+ * BITFIELD_DECLARE array to store the mac.
+ */
+void
+mlx5_nl_mac_addr_flush(int nlsk_fd, unsigned int iface_idx,
+ struct rte_ether_addr *mac_addrs, int n,
+ uint64_t *mac_own)
+{
+ int i;
+
+ for (i = n - 1; i >= 0; --i) {
+ struct rte_ether_addr *m = &mac_addrs[i];
+
+ if (BITFIELD_ISSET(mac_own, i))
+ mlx5_nl_mac_addr_remove(nlsk_fd, iface_idx, mac_own, m,
+ i);
+ }
+}
+
+/**
+ * Enable promiscuous / all multicast mode through Netlink.
+ *
+ * @param[in] nlsk_fd
+ * Netlink socket file descriptor.
+ * @param[in] iface_idx
+ * Net device interface index.
+ * @param flags
+ * IFF_PROMISC for promiscuous, IFF_ALLMULTI for allmulti.
+ * @param enable
+ * Nonzero to enable, disable otherwise.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+mlx5_nl_device_flags(int nlsk_fd, unsigned int iface_idx, uint32_t flags,
+ int enable)
+{
+ struct {
+ struct nlmsghdr hdr;
+ struct ifinfomsg ifi;
+ } req = {
+ .hdr = {
+ .nlmsg_len = NLMSG_LENGTH(sizeof(struct ifinfomsg)),
+ .nlmsg_type = RTM_NEWLINK,
+ .nlmsg_flags = NLM_F_REQUEST,
+ },
+ .ifi = {
+ .ifi_flags = enable ? flags : 0,
+ .ifi_change = flags,
+ .ifi_index = iface_idx,
+ },
+ };
+ uint32_t sn = MLX5_NL_SN_GENERATE;
+ int ret;
+
+ assert(!(flags & ~(IFF_PROMISC | IFF_ALLMULTI)));
+ if (nlsk_fd < 0)
+ return 0;
+ ret = mlx5_nl_send(nlsk_fd, &req.hdr, sn);
+ if (ret < 0)
+ return ret;
+ return 0;
+}
+
+/**
+ * Enable promiscuous mode through Netlink.
+ *
+ * @param[in] nlsk_fd
+ * Netlink socket file descriptor.
+ * @param[in] iface_idx
+ * Net device interface index.
+ * @param enable
+ * Nonzero to enable, disable otherwise.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_nl_promisc(int nlsk_fd, unsigned int iface_idx, int enable)
+{
+ int ret = mlx5_nl_device_flags(nlsk_fd, iface_idx, IFF_PROMISC, enable);
+
+ if (ret)
+ DRV_LOG(DEBUG,
+ "Interface %u cannot %s promisc mode: Netlink error %s",
+ iface_idx, enable ? "enable" : "disable",
+ strerror(rte_errno));
+ return ret;
+}
+
+/**
+ * Enable all multicast mode through Netlink.
+ *
+ * @param[in] nlsk_fd
+ * Netlink socket file descriptor.
+ * @param[in] iface_idx
+ * Net device interface index.
+ * @param enable
+ * Nonzero to enable, disable otherwise.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_nl_allmulti(int nlsk_fd, unsigned int iface_idx, int enable)
+{
+ int ret = mlx5_nl_device_flags(nlsk_fd, iface_idx, IFF_ALLMULTI,
+ enable);
+
+ if (ret)
+ DRV_LOG(DEBUG,
+ "Interface %u cannot %s allmulti : Netlink error %s",
+ iface_idx, enable ? "enable" : "disable",
+ strerror(rte_errno));
+ return ret;
+}
+
+/**
+ * Process network interface information from Netlink message.
+ *
+ * @param nh
+ * Pointer to Netlink message header.
+ * @param arg
+ * Opaque data pointer for this callback.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+mlx5_nl_cmdget_cb(struct nlmsghdr *nh, void *arg)
+{
+ struct mlx5_nl_ifindex_data *data = arg;
+ struct mlx5_nl_ifindex_data local = {
+ .flags = 0,
+ };
+ size_t off = NLMSG_HDRLEN;
+
+ if (nh->nlmsg_type !=
+ RDMA_NL_GET_TYPE(RDMA_NL_NLDEV, RDMA_NLDEV_CMD_GET) &&
+ nh->nlmsg_type !=
+ RDMA_NL_GET_TYPE(RDMA_NL_NLDEV, RDMA_NLDEV_CMD_PORT_GET))
+ goto error;
+ while (off < nh->nlmsg_len) {
+ struct nlattr *na = (void *)((uintptr_t)nh + off);
+ void *payload = (void *)((uintptr_t)na + NLA_HDRLEN);
+
+ if (na->nla_len > nh->nlmsg_len - off)
+ goto error;
+ switch (na->nla_type) {
+ case RDMA_NLDEV_ATTR_DEV_INDEX:
+ local.ibindex = *(uint32_t *)payload;
+ local.flags |= MLX5_NL_CMD_GET_IB_INDEX;
+ break;
+ case RDMA_NLDEV_ATTR_DEV_NAME:
+ if (!strcmp(payload, data->name))
+ local.flags |= MLX5_NL_CMD_GET_IB_NAME;
+ break;
+ case RDMA_NLDEV_ATTR_NDEV_INDEX:
+ local.ifindex = *(uint32_t *)payload;
+ local.flags |= MLX5_NL_CMD_GET_NET_INDEX;
+ break;
+ case RDMA_NLDEV_ATTR_PORT_INDEX:
+ local.portnum = *(uint32_t *)payload;
+ local.flags |= MLX5_NL_CMD_GET_PORT_INDEX;
+ break;
+ default:
+ break;
+ }
+ off += NLA_ALIGN(na->nla_len);
+ }
+ /*
+ * It is possible to have multiple messages for all
+ * Infiniband devices in the system with appropriate name.
+ * So we should gather parameters locally and copy to
+ * query context only in case of coinciding device name.
+ */
+ if (local.flags & MLX5_NL_CMD_GET_IB_NAME) {
+ data->flags = local.flags;
+ data->ibindex = local.ibindex;
+ data->ifindex = local.ifindex;
+ data->portnum = local.portnum;
+ }
+ return 0;
+error:
+ rte_errno = EINVAL;
+ return -rte_errno;
+}
+
+/**
+ * Get index of network interface associated with some IB device.
+ *
+ * This is the only somewhat safe method to avoid resorting to heuristics
+ * when faced with port representors. Unfortunately it requires at least
+ * Linux 4.17.
+ *
+ * @param nl
+ * Netlink socket of the RDMA kind (NETLINK_RDMA).
+ * @param[in] name
+ * IB device name.
+ * @param[in] pindex
+ * IB device port index, starting from 1
+ * @return
+ * A valid (nonzero) interface index on success, 0 otherwise and rte_errno
+ * is set.
+ */
+unsigned int
+mlx5_nl_ifindex(int nl, const char *name, uint32_t pindex)
+{
+ struct mlx5_nl_ifindex_data data = {
+ .name = name,
+ .flags = 0,
+ .ibindex = 0, /* Determined during first pass. */
+ .ifindex = 0, /* Determined during second pass. */
+ };
+ union {
+ struct nlmsghdr nh;
+ uint8_t buf[NLMSG_HDRLEN +
+ NLA_HDRLEN + NLA_ALIGN(sizeof(data.ibindex)) +
+ NLA_HDRLEN + NLA_ALIGN(sizeof(pindex))];
+ } req = {
+ .nh = {
+ .nlmsg_len = NLMSG_LENGTH(0),
+ .nlmsg_type = RDMA_NL_GET_TYPE(RDMA_NL_NLDEV,
+ RDMA_NLDEV_CMD_GET),
+ .nlmsg_flags = NLM_F_REQUEST | NLM_F_ACK | NLM_F_DUMP,
+ },
+ };
+ struct nlattr *na;
+ uint32_t sn = MLX5_NL_SN_GENERATE;
+ int ret;
+
+ ret = mlx5_nl_send(nl, &req.nh, sn);
+ if (ret < 0)
+ return 0;
+ ret = mlx5_nl_recv(nl, sn, mlx5_nl_cmdget_cb, &data);
+ if (ret < 0)
+ return 0;
+ if (!(data.flags & MLX5_NL_CMD_GET_IB_NAME) ||
+ !(data.flags & MLX5_NL_CMD_GET_IB_INDEX))
+ goto error;
+ data.flags = 0;
+ sn = MLX5_NL_SN_GENERATE;
+ req.nh.nlmsg_type = RDMA_NL_GET_TYPE(RDMA_NL_NLDEV,
+ RDMA_NLDEV_CMD_PORT_GET);
+ req.nh.nlmsg_flags = NLM_F_REQUEST | NLM_F_ACK;
+ req.nh.nlmsg_len = NLMSG_LENGTH(sizeof(req.buf) - NLMSG_HDRLEN);
+ na = (void *)((uintptr_t)req.buf + NLMSG_HDRLEN);
+ na->nla_len = NLA_HDRLEN + sizeof(data.ibindex);
+ na->nla_type = RDMA_NLDEV_ATTR_DEV_INDEX;
+ memcpy((void *)((uintptr_t)na + NLA_HDRLEN),
+ &data.ibindex, sizeof(data.ibindex));
+ na = (void *)((uintptr_t)na + NLA_ALIGN(na->nla_len));
+ na->nla_len = NLA_HDRLEN + sizeof(pindex);
+ na->nla_type = RDMA_NLDEV_ATTR_PORT_INDEX;
+ memcpy((void *)((uintptr_t)na + NLA_HDRLEN),
+ &pindex, sizeof(pindex));
+ ret = mlx5_nl_send(nl, &req.nh, sn);
+ if (ret < 0)
+ return 0;
+ ret = mlx5_nl_recv(nl, sn, mlx5_nl_cmdget_cb, &data);
+ if (ret < 0)
+ return 0;
+ if (!(data.flags & MLX5_NL_CMD_GET_IB_NAME) ||
+ !(data.flags & MLX5_NL_CMD_GET_IB_INDEX) ||
+ !(data.flags & MLX5_NL_CMD_GET_NET_INDEX) ||
+ !data.ifindex)
+ goto error;
+ return data.ifindex;
+error:
+ rte_errno = ENODEV;
+ return 0;
+}
+
+/**
+ * Get the number of physical ports of given IB device.
+ *
+ * @param nl
+ * Netlink socket of the RDMA kind (NETLINK_RDMA).
+ * @param[in] name
+ * IB device name.
+ *
+ * @return
+ * A valid (nonzero) number of ports on success, 0 otherwise
+ * and rte_errno is set.
+ */
+unsigned int
+mlx5_nl_portnum(int nl, const char *name)
+{
+ struct mlx5_nl_ifindex_data data = {
+ .flags = 0,
+ .name = name,
+ .ifindex = 0,
+ .portnum = 0,
+ };
+ struct nlmsghdr req = {
+ .nlmsg_len = NLMSG_LENGTH(0),
+ .nlmsg_type = RDMA_NL_GET_TYPE(RDMA_NL_NLDEV,
+ RDMA_NLDEV_CMD_GET),
+ .nlmsg_flags = NLM_F_REQUEST | NLM_F_ACK | NLM_F_DUMP,
+ };
+ uint32_t sn = MLX5_NL_SN_GENERATE;
+ int ret;
+
+ ret = mlx5_nl_send(nl, &req, sn);
+ if (ret < 0)
+ return 0;
+ ret = mlx5_nl_recv(nl, sn, mlx5_nl_cmdget_cb, &data);
+ if (ret < 0)
+ return 0;
+ if (!(data.flags & MLX5_NL_CMD_GET_IB_NAME) ||
+ !(data.flags & MLX5_NL_CMD_GET_IB_INDEX) ||
+ !(data.flags & MLX5_NL_CMD_GET_PORT_INDEX)) {
+ rte_errno = ENODEV;
+ return 0;
+ }
+ if (!data.portnum)
+ rte_errno = EINVAL;
+ return data.portnum;
+}
+
+/**
+ * Analyze gathered port parameters via Netlink to recognize master
+ * and representor devices for E-Switch configuration.
+ *
+ * @param[in] num_vf_set
+ * flag of presence of number of VFs port attribute.
+ * @param[inout] switch_info
+ * Port information, including port name as a number and port name
+ * type if recognized
+ *
+ * @return
+ * master and representor flags are set in switch_info according to
+ * recognized parameters (if any).
+ */
+static void
+mlx5_nl_check_switch_info(bool num_vf_set,
+ struct mlx5_switch_info *switch_info)
+{
+ switch (switch_info->name_type) {
+ case MLX5_PHYS_PORT_NAME_TYPE_UNKNOWN:
+ /*
+ * Name is not recognized, assume the master,
+ * check the number of VFs key presence.
+ */
+ switch_info->master = num_vf_set;
+ break;
+ case MLX5_PHYS_PORT_NAME_TYPE_NOTSET:
+ /*
+ * Name is not set, this assumes the legacy naming
+ * schema for master, just check if there is a
+ * number of VFs key.
+ */
+ switch_info->master = num_vf_set;
+ break;
+ case MLX5_PHYS_PORT_NAME_TYPE_UPLINK:
+ /* New uplink naming schema recognized. */
+ switch_info->master = 1;
+ break;
+ case MLX5_PHYS_PORT_NAME_TYPE_LEGACY:
+ /* Legacy representors naming schema. */
+ switch_info->representor = !num_vf_set;
+ break;
+ case MLX5_PHYS_PORT_NAME_TYPE_PFVF:
+ /* New representors naming schema. */
+ switch_info->representor = 1;
+ break;
+ }
+}
+
+/**
+ * Process switch information from Netlink message.
+ *
+ * @param nh
+ * Pointer to Netlink message header.
+ * @param arg
+ * Opaque data pointer for this callback.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+mlx5_nl_switch_info_cb(struct nlmsghdr *nh, void *arg)
+{
+ struct mlx5_switch_info info = {
+ .master = 0,
+ .representor = 0,
+ .name_type = MLX5_PHYS_PORT_NAME_TYPE_NOTSET,
+ .port_name = 0,
+ .switch_id = 0,
+ };
+ size_t off = NLMSG_LENGTH(sizeof(struct ifinfomsg));
+ bool switch_id_set = false;
+ bool num_vf_set = false;
+
+ if (nh->nlmsg_type != RTM_NEWLINK)
+ goto error;
+ while (off < nh->nlmsg_len) {
+ struct rtattr *ra = (void *)((uintptr_t)nh + off);
+ void *payload = RTA_DATA(ra);
+ unsigned int i;
+
+ if (ra->rta_len > nh->nlmsg_len - off)
+ goto error;
+ switch (ra->rta_type) {
+ case IFLA_NUM_VF:
+ num_vf_set = true;
+ break;
+ case IFLA_PHYS_PORT_NAME:
+ mlx5_translate_port_name((char *)payload, &info);
+ break;
+ case IFLA_PHYS_SWITCH_ID:
+ info.switch_id = 0;
+ for (i = 0; i < RTA_PAYLOAD(ra); ++i) {
+ info.switch_id <<= 8;
+ info.switch_id |= ((uint8_t *)payload)[i];
+ }
+ switch_id_set = true;
+ break;
+ }
+ off += RTA_ALIGN(ra->rta_len);
+ }
+ if (switch_id_set) {
+ /* We have some E-Switch configuration. */
+ mlx5_nl_check_switch_info(num_vf_set, &info);
+ }
+ assert(!(info.master && info.representor));
+ memcpy(arg, &info, sizeof(info));
+ return 0;
+error:
+ rte_errno = EINVAL;
+ return -rte_errno;
+}
+
+/**
+ * Get switch information associated with network interface.
+ *
+ * @param nl
+ * Netlink socket of the ROUTE kind (NETLINK_ROUTE).
+ * @param ifindex
+ * Network interface index.
+ * @param[out] info
+ * Switch information object, populated in case of success.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_nl_switch_info(int nl, unsigned int ifindex,
+ struct mlx5_switch_info *info)
+{
+ struct {
+ struct nlmsghdr nh;
+ struct ifinfomsg info;
+ struct rtattr rta;
+ uint32_t extmask;
+ } req = {
+ .nh = {
+ .nlmsg_len = NLMSG_LENGTH
+ (sizeof(req.info) +
+ RTA_LENGTH(sizeof(uint32_t))),
+ .nlmsg_type = RTM_GETLINK,
+ .nlmsg_flags = NLM_F_REQUEST | NLM_F_ACK,
+ },
+ .info = {
+ .ifi_family = AF_UNSPEC,
+ .ifi_index = ifindex,
+ },
+ .rta = {
+ .rta_type = IFLA_EXT_MASK,
+ .rta_len = RTA_LENGTH(sizeof(int32_t)),
+ },
+ .extmask = RTE_LE32(1),
+ };
+ uint32_t sn = MLX5_NL_SN_GENERATE;
+ int ret;
+
+ ret = mlx5_nl_send(nl, &req.nh, sn);
+ if (ret >= 0)
+ ret = mlx5_nl_recv(nl, sn, mlx5_nl_switch_info_cb, info);
+ if (info->master && info->representor) {
+ DRV_LOG(ERR, "ifindex %u device is recognized as master"
+ " and as representor", ifindex);
+ rte_errno = ENODEV;
+ ret = -rte_errno;
+ }
+ return ret;
+}
+
+/*
+ * Delete VLAN network device by ifindex.
+ *
+ * @param[in] tcf
+ * Context object initialized by mlx5_nl_vlan_vmwa_init().
+ * @param[in] ifindex
+ * Interface index of network device to delete.
+ */
+void
+mlx5_nl_vlan_vmwa_delete(struct mlx5_nl_vlan_vmwa_context *vmwa,
+ uint32_t ifindex)
+{
+ uint32_t sn = MLX5_NL_SN_GENERATE;
+ int ret;
+ struct {
+ struct nlmsghdr nh;
+ struct ifinfomsg info;
+ } req = {
+ .nh = {
+ .nlmsg_len = NLMSG_LENGTH(sizeof(struct ifinfomsg)),
+ .nlmsg_type = RTM_DELLINK,
+ .nlmsg_flags = NLM_F_REQUEST | NLM_F_ACK,
+ },
+ .info = {
+ .ifi_family = AF_UNSPEC,
+ .ifi_index = ifindex,
+ },
+ };
+
+ if (ifindex) {
+ ret = mlx5_nl_send(vmwa->nl_socket, &req.nh, sn);
+ if (ret >= 0)
+ ret = mlx5_nl_recv(vmwa->nl_socket, sn, NULL, NULL);
+ if (ret < 0)
+ DRV_LOG(WARNING, "netlink: error deleting VLAN WA"
+ " ifindex %u, %d", ifindex, ret);
+ }
+}
+
+/* Set of subroutines to build Netlink message. */
+static struct nlattr *
+nl_msg_tail(struct nlmsghdr *nlh)
+{
+ return (struct nlattr *)
+ (((uint8_t *)nlh) + NLMSG_ALIGN(nlh->nlmsg_len));
+}
+
+static void
+nl_attr_put(struct nlmsghdr *nlh, int type, const void *data, int alen)
+{
+ struct nlattr *nla = nl_msg_tail(nlh);
+
+ nla->nla_type = type;
+ nla->nla_len = NLMSG_ALIGN(sizeof(struct nlattr) + alen);
+ nlh->nlmsg_len = NLMSG_ALIGN(nlh->nlmsg_len) + nla->nla_len;
+
+ if (alen)
+ memcpy((uint8_t *)nla + sizeof(struct nlattr), data, alen);
+}
+
+static struct nlattr *
+nl_attr_nest_start(struct nlmsghdr *nlh, int type)
+{
+ struct nlattr *nest = (struct nlattr *)nl_msg_tail(nlh);
+
+ nl_attr_put(nlh, type, NULL, 0);
+ return nest;
+}
+
+static void
+nl_attr_nest_end(struct nlmsghdr *nlh, struct nlattr *nest)
+{
+ nest->nla_len = (uint8_t *)nl_msg_tail(nlh) - (uint8_t *)nest;
+}
+
+/*
+ * Create network VLAN device with specified VLAN tag.
+ *
+ * @param[in] tcf
+ * Context object initialized by mlx5_nl_vlan_vmwa_init().
+ * @param[in] ifindex
+ * Base network interface index.
+ * @param[in] tag
+ * VLAN tag for VLAN network device to create.
+ */
+uint32_t
+mlx5_nl_vlan_vmwa_create(struct mlx5_nl_vlan_vmwa_context *vmwa,
+ uint32_t ifindex, uint16_t tag)
+{
+ struct nlmsghdr *nlh;
+ struct ifinfomsg *ifm;
+ char name[sizeof(MLX5_VMWA_VLAN_DEVICE_PFX) + 32];
+
+ alignas(RTE_CACHE_LINE_SIZE)
+ uint8_t buf[NLMSG_ALIGN(sizeof(struct nlmsghdr)) +
+ NLMSG_ALIGN(sizeof(struct ifinfomsg)) +
+ NLMSG_ALIGN(sizeof(struct nlattr)) * 8 +
+ NLMSG_ALIGN(sizeof(uint32_t)) +
+ NLMSG_ALIGN(sizeof(name)) +
+ NLMSG_ALIGN(sizeof("vlan")) +
+ NLMSG_ALIGN(sizeof(uint32_t)) +
+ NLMSG_ALIGN(sizeof(uint16_t)) + 16];
+ struct nlattr *na_info;
+ struct nlattr *na_vlan;
+ uint32_t sn = MLX5_NL_SN_GENERATE;
+ int ret;
+
+ memset(buf, 0, sizeof(buf));
+ nlh = (struct nlmsghdr *)buf;
+ nlh->nlmsg_len = sizeof(struct nlmsghdr);
+ nlh->nlmsg_type = RTM_NEWLINK;
+ nlh->nlmsg_flags = NLM_F_REQUEST | NLM_F_CREATE |
+ NLM_F_EXCL | NLM_F_ACK;
+ ifm = (struct ifinfomsg *)nl_msg_tail(nlh);
+ nlh->nlmsg_len += sizeof(struct ifinfomsg);
+ ifm->ifi_family = AF_UNSPEC;
+ ifm->ifi_type = 0;
+ ifm->ifi_index = 0;
+ ifm->ifi_flags = IFF_UP;
+ ifm->ifi_change = 0xffffffff;
+ nl_attr_put(nlh, IFLA_LINK, &ifindex, sizeof(ifindex));
+ ret = snprintf(name, sizeof(name), "%s.%u.%u",
+ MLX5_VMWA_VLAN_DEVICE_PFX, ifindex, tag);
+ nl_attr_put(nlh, IFLA_IFNAME, name, ret + 1);
+ na_info = nl_attr_nest_start(nlh, IFLA_LINKINFO);
+ nl_attr_put(nlh, IFLA_INFO_KIND, "vlan", sizeof("vlan"));
+ na_vlan = nl_attr_nest_start(nlh, IFLA_INFO_DATA);
+ nl_attr_put(nlh, IFLA_VLAN_ID, &tag, sizeof(tag));
+ nl_attr_nest_end(nlh, na_vlan);
+ nl_attr_nest_end(nlh, na_info);
+ assert(sizeof(buf) >= nlh->nlmsg_len);
+ ret = mlx5_nl_send(vmwa->nl_socket, nlh, sn);
+ if (ret >= 0)
+ ret = mlx5_nl_recv(vmwa->nl_socket, sn, NULL, NULL);
+ if (ret < 0) {
+ DRV_LOG(WARNING, "netlink: VLAN %s create failure (%d)", name,
+ ret);
+ }
+ // Try to get ifindex of created or pre-existing device.
+ ret = if_nametoindex(name);
+ if (!ret) {
+ DRV_LOG(WARNING, "VLAN %s failed to get index (%d)", name,
+ errno);
+ return 0;
+ }
+ return ret;
+}
new file mode 100644
@@ -0,0 +1,57 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright 2019 Mellanox Technologies, Ltd
+ */
+
+#ifndef RTE_PMD_MLX5_NL_H_
+#define RTE_PMD_MLX5_NL_H_
+
+#include <linux/netlink.h>
+
+#include <rte_ether.h>
+
+#include "mlx5_common.h"
+
+
+/* VLAN netdev for VLAN workaround. */
+struct mlx5_nl_vlan_dev {
+ uint32_t refcnt;
+ uint32_t ifindex; /**< Own interface index. */
+};
+
+/*
+ * Array of VLAN devices created on the base of VF
+ * used for workaround in virtual environments.
+ */
+struct mlx5_nl_vlan_vmwa_context {
+ int nl_socket;
+ uint32_t vf_ifindex;
+ struct mlx5_nl_vlan_dev vlan_dev[4096];
+};
+
+
+int mlx5_nl_init(int protocol);
+int mlx5_nl_mac_addr_add(int nlsk_fd, unsigned int iface_idx, uint64_t *mac_own,
+ struct rte_ether_addr *mac, uint32_t index);
+int mlx5_nl_mac_addr_remove(int nlsk_fd, unsigned int iface_idx,
+ uint64_t *mac_own, struct rte_ether_addr *mac,
+ uint32_t index);
+void mlx5_nl_mac_addr_sync(int nlsk_fd, unsigned int iface_idx,
+ struct rte_ether_addr *mac_addrs, int n);
+void mlx5_nl_mac_addr_flush(int nlsk_fd, unsigned int iface_idx,
+ struct rte_ether_addr *mac_addrs, int n,
+ uint64_t *mac_own);
+int mlx5_nl_promisc(int nlsk_fd, unsigned int iface_idx, int enable);
+int mlx5_nl_allmulti(int nlsk_fd, unsigned int iface_idx, int enable);
+unsigned int mlx5_nl_portnum(int nl, const char *name);
+unsigned int mlx5_nl_ifindex(int nl, const char *name, uint32_t pindex);
+int mlx5_nl_vf_mac_addr_modify(int nlsk_fd, unsigned int iface_idx,
+ struct rte_ether_addr *mac, int vf_index);
+int mlx5_nl_switch_info(int nl, unsigned int ifindex,
+ struct mlx5_switch_info *info);
+
+void mlx5_nl_vlan_vmwa_delete(struct mlx5_nl_vlan_vmwa_context *vmwa,
+ uint32_t ifindex);
+uint32_t mlx5_nl_vlan_vmwa_create(struct mlx5_nl_vlan_vmwa_context *vmwa,
+ uint32_t ifindex, uint16_t tag);
+
+#endif /* RTE_PMD_MLX5_NL_H_ */
@@ -26,5 +26,21 @@ DPDK_20.02 {
mlx5_devx_get_out_command_status;
mlx5_dev_to_pci_addr;
- mlx5_vdpa_mode_selected;
+
+ mlx5_nl_allmulti;
+ mlx5_nl_ifindex;
+ mlx5_nl_init;
+ mlx5_nl_mac_addr_add;
+ mlx5_nl_mac_addr_flush;
+ mlx5_nl_mac_addr_remove;
+ mlx5_nl_mac_addr_sync;
+ mlx5_nl_portnum;
+ mlx5_nl_promisc;
+ mlx5_nl_switch_info;
+ mlx5_nl_vf_mac_addr_modify;
+ mlx5_nl_vlan_vmwa_create;
+ mlx5_nl_vlan_vmwa_delete;
+
+ mlx5_translate_port_name;
+ mlx5_vdpa_mode_selected;
};
@@ -30,7 +30,6 @@ SRCS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += mlx5_flow_meter.c
SRCS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += mlx5_flow_dv.c
SRCS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += mlx5_flow_verbs.c
SRCS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += mlx5_mp.c
-SRCS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += mlx5_nl.c
SRCS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += mlx5_utils.c
SRCS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += mlx5_socket.c
@@ -19,7 +19,6 @@ sources = files(
'mlx5_flow_verbs.c',
'mlx5_mac.c',
'mlx5_mr.c',
- 'mlx5_nl.c',
'mlx5_rss.c',
'mlx5_rxmode.c',
'mlx5_rxq.c',
@@ -35,11 +35,11 @@
#include <mlx5_glue.h>
#include <mlx5_devx_cmds.h>
#include <mlx5_prm.h>
+#include <mlx5_nl.h>
#include "mlx5_defs.h"
#include "mlx5_utils.h"
#include "mlx5_mr.h"
-#include "mlx5_nl.h"
#include "mlx5_autoconf.h"
/* Request types for IPC. */
@@ -14,14 +14,6 @@
/* Reported driver name. */
#define MLX5_DRIVER_NAME "net_mlx5"
-/* Maximum number of simultaneous unicast MAC addresses. */
-#define MLX5_MAX_UC_MAC_ADDRESSES 128
-/* Maximum number of simultaneous Multicast MAC addresses. */
-#define MLX5_MAX_MC_MAC_ADDRESSES 128
-/* Maximum number of simultaneous MAC addresses. */
-#define MLX5_MAX_MAC_ADDRESSES \
- (MLX5_MAX_UC_MAC_ADDRESSES + MLX5_MAX_MC_MAC_ADDRESSES)
-
/* Maximum number of simultaneous VLAN filters. */
#define MLX5_MAX_VLAN_IDS 128
@@ -1940,61 +1940,6 @@ struct mlx5_priv *
}
/**
- * Extract port name, as a number, from sysfs or netlink information.
- *
- * @param[in] port_name_in
- * String representing the port name.
- * @param[out] port_info_out
- * Port information, including port name as a number and port name
- * type if recognized
- *
- * @return
- * port_name field set according to recognized name format.
- */
-void
-mlx5_translate_port_name(const char *port_name_in,
- struct mlx5_switch_info *port_info_out)
-{
- char pf_c1, pf_c2, vf_c1, vf_c2;
- char *end;
- int sc_items;
-
- /*
- * Check for port-name as a string of the form pf0vf0
- * (support kernel ver >= 5.0 or OFED ver >= 4.6).
- */
- sc_items = sscanf(port_name_in, "%c%c%d%c%c%d",
- &pf_c1, &pf_c2, &port_info_out->pf_num,
- &vf_c1, &vf_c2, &port_info_out->port_name);
- if (sc_items == 6 &&
- pf_c1 == 'p' && pf_c2 == 'f' &&
- vf_c1 == 'v' && vf_c2 == 'f') {
- port_info_out->name_type = MLX5_PHYS_PORT_NAME_TYPE_PFVF;
- return;
- }
- /*
- * Check for port-name as a string of the form p0
- * (support kernel ver >= 5.0, or OFED ver >= 4.6).
- */
- sc_items = sscanf(port_name_in, "%c%d",
- &pf_c1, &port_info_out->port_name);
- if (sc_items == 2 && pf_c1 == 'p') {
- port_info_out->name_type = MLX5_PHYS_PORT_NAME_TYPE_UPLINK;
- return;
- }
- /* Check for port-name as a number (support kernel ver < 5.0 */
- errno = 0;
- port_info_out->port_name = strtol(port_name_in, &end, 0);
- if (!errno &&
- (size_t)(end - port_name_in) == strlen(port_name_in)) {
- port_info_out->name_type = MLX5_PHYS_PORT_NAME_TYPE_LEGACY;
- return;
- }
- port_info_out->name_type = MLX5_PHYS_PORT_NAME_TYPE_UNKNOWN;
- return;
-}
-
-/**
* DPDK callback to retrieve plug-in module EEPROM information (type and size).
*
* @param dev
deleted file mode 100644
@@ -1,1338 +0,0 @@
-/* SPDX-License-Identifier: BSD-3-Clause
- * Copyright 2018 6WIND S.A.
- * Copyright 2018 Mellanox Technologies, Ltd
- */
-
-#include <errno.h>
-#include <linux/if_link.h>
-#include <linux/rtnetlink.h>
-#include <net/if.h>
-#include <rdma/rdma_netlink.h>
-#include <stdbool.h>
-#include <stdint.h>
-#include <stdlib.h>
-#include <stdalign.h>
-#include <string.h>
-#include <sys/socket.h>
-#include <unistd.h>
-
-#include <rte_errno.h>
-#include <rte_atomic.h>
-#include <rte_ether.h>
-
-#include "mlx5.h"
-#include "mlx5_nl.h"
-#include "mlx5_utils.h"
-
-/* Size of the buffer to receive kernel messages */
-#define MLX5_NL_BUF_SIZE (32 * 1024)
-/* Send buffer size for the Netlink socket */
-#define MLX5_SEND_BUF_SIZE 32768
-/* Receive buffer size for the Netlink socket */
-#define MLX5_RECV_BUF_SIZE 32768
-
-/** Parameters of VLAN devices created by driver. */
-#define MLX5_VMWA_VLAN_DEVICE_PFX "evmlx"
-/*
- * Define NDA_RTA as defined in iproute2 sources.
- *
- * see in iproute2 sources file include/libnetlink.h
- */
-#ifndef MLX5_NDA_RTA
-#define MLX5_NDA_RTA(r) \
- ((struct rtattr *)(((char *)(r)) + NLMSG_ALIGN(sizeof(struct ndmsg))))
-#endif
-/*
- * Define NLMSG_TAIL as defined in iproute2 sources.
- *
- * see in iproute2 sources file include/libnetlink.h
- */
-#ifndef NLMSG_TAIL
-#define NLMSG_TAIL(nmsg) \
- ((struct rtattr *)(((char *)(nmsg)) + NLMSG_ALIGN((nmsg)->nlmsg_len)))
-#endif
-/*
- * The following definitions are normally found in rdma/rdma_netlink.h,
- * however they are so recent that most systems do not expose them yet.
- */
-#ifndef HAVE_RDMA_NL_NLDEV
-#define RDMA_NL_NLDEV 5
-#endif
-#ifndef HAVE_RDMA_NLDEV_CMD_GET
-#define RDMA_NLDEV_CMD_GET 1
-#endif
-#ifndef HAVE_RDMA_NLDEV_CMD_PORT_GET
-#define RDMA_NLDEV_CMD_PORT_GET 5
-#endif
-#ifndef HAVE_RDMA_NLDEV_ATTR_DEV_INDEX
-#define RDMA_NLDEV_ATTR_DEV_INDEX 1
-#endif
-#ifndef HAVE_RDMA_NLDEV_ATTR_DEV_NAME
-#define RDMA_NLDEV_ATTR_DEV_NAME 2
-#endif
-#ifndef HAVE_RDMA_NLDEV_ATTR_PORT_INDEX
-#define RDMA_NLDEV_ATTR_PORT_INDEX 3
-#endif
-#ifndef HAVE_RDMA_NLDEV_ATTR_NDEV_INDEX
-#define RDMA_NLDEV_ATTR_NDEV_INDEX 50
-#endif
-
-/* These are normally found in linux/if_link.h. */
-#ifndef HAVE_IFLA_NUM_VF
-#define IFLA_NUM_VF 21
-#endif
-#ifndef HAVE_IFLA_EXT_MASK
-#define IFLA_EXT_MASK 29
-#endif
-#ifndef HAVE_IFLA_PHYS_SWITCH_ID
-#define IFLA_PHYS_SWITCH_ID 36
-#endif
-#ifndef HAVE_IFLA_PHYS_PORT_NAME
-#define IFLA_PHYS_PORT_NAME 38
-#endif
-
-/* Add/remove MAC address through Netlink */
-struct mlx5_nl_mac_addr {
- struct rte_ether_addr (*mac)[];
- /**< MAC address handled by the device. */
- int mac_n; /**< Number of addresses in the array. */
-};
-
-#define MLX5_NL_CMD_GET_IB_NAME (1 << 0)
-#define MLX5_NL_CMD_GET_IB_INDEX (1 << 1)
-#define MLX5_NL_CMD_GET_NET_INDEX (1 << 2)
-#define MLX5_NL_CMD_GET_PORT_INDEX (1 << 3)
-
-/** Data structure used by mlx5_nl_cmdget_cb(). */
-struct mlx5_nl_ifindex_data {
- const char *name; /**< IB device name (in). */
- uint32_t flags; /**< found attribute flags (out). */
- uint32_t ibindex; /**< IB device index (out). */
- uint32_t ifindex; /**< Network interface index (out). */
- uint32_t portnum; /**< IB device max port number (out). */
-};
-
-rte_atomic32_t atomic_sn = RTE_ATOMIC32_INIT(0);
-
-/* Generate Netlink sequence number. */
-#define MLX5_NL_SN_GENERATE ((uint32_t)rte_atomic32_add_return(&atomic_sn, 1))
-
-/**
- * Opens a Netlink socket.
- *
- * @param protocol
- * Netlink protocol (e.g. NETLINK_ROUTE, NETLINK_RDMA).
- *
- * @return
- * A file descriptor on success, a negative errno value otherwise and
- * rte_errno is set.
- */
-int
-mlx5_nl_init(int protocol)
-{
- int fd;
- int sndbuf_size = MLX5_SEND_BUF_SIZE;
- int rcvbuf_size = MLX5_RECV_BUF_SIZE;
- struct sockaddr_nl local = {
- .nl_family = AF_NETLINK,
- };
- int ret;
-
- fd = socket(AF_NETLINK, SOCK_RAW | SOCK_CLOEXEC, protocol);
- if (fd == -1) {
- rte_errno = errno;
- return -rte_errno;
- }
- ret = setsockopt(fd, SOL_SOCKET, SO_SNDBUF, &sndbuf_size, sizeof(int));
- if (ret == -1) {
- rte_errno = errno;
- goto error;
- }
- ret = setsockopt(fd, SOL_SOCKET, SO_RCVBUF, &rcvbuf_size, sizeof(int));
- if (ret == -1) {
- rte_errno = errno;
- goto error;
- }
- ret = bind(fd, (struct sockaddr *)&local, sizeof(local));
- if (ret == -1) {
- rte_errno = errno;
- goto error;
- }
- return fd;
-error:
- close(fd);
- return -rte_errno;
-}
-
-/**
- * Send a request message to the kernel on the Netlink socket.
- *
- * @param[in] nlsk_fd
- * Netlink socket file descriptor.
- * @param[in] nh
- * The Netlink message send to the kernel.
- * @param[in] ssn
- * Sequence number.
- * @param[in] req
- * Pointer to the request structure.
- * @param[in] len
- * Length of the request in bytes.
- *
- * @return
- * The number of sent bytes on success, a negative errno value otherwise and
- * rte_errno is set.
- */
-static int
-mlx5_nl_request(int nlsk_fd, struct nlmsghdr *nh, uint32_t sn, void *req,
- int len)
-{
- struct sockaddr_nl sa = {
- .nl_family = AF_NETLINK,
- };
- struct iovec iov[2] = {
- { .iov_base = nh, .iov_len = sizeof(*nh), },
- { .iov_base = req, .iov_len = len, },
- };
- struct msghdr msg = {
- .msg_name = &sa,
- .msg_namelen = sizeof(sa),
- .msg_iov = iov,
- .msg_iovlen = 2,
- };
- int send_bytes;
-
- nh->nlmsg_pid = 0; /* communication with the kernel uses pid 0 */
- nh->nlmsg_seq = sn;
- send_bytes = sendmsg(nlsk_fd, &msg, 0);
- if (send_bytes < 0) {
- rte_errno = errno;
- return -rte_errno;
- }
- return send_bytes;
-}
-
-/**
- * Send a message to the kernel on the Netlink socket.
- *
- * @param[in] nlsk_fd
- * The Netlink socket file descriptor used for communication.
- * @param[in] nh
- * The Netlink message send to the kernel.
- * @param[in] sn
- * Sequence number.
- *
- * @return
- * The number of sent bytes on success, a negative errno value otherwise and
- * rte_errno is set.
- */
-static int
-mlx5_nl_send(int nlsk_fd, struct nlmsghdr *nh, uint32_t sn)
-{
- struct sockaddr_nl sa = {
- .nl_family = AF_NETLINK,
- };
- struct iovec iov = {
- .iov_base = nh,
- .iov_len = nh->nlmsg_len,
- };
- struct msghdr msg = {
- .msg_name = &sa,
- .msg_namelen = sizeof(sa),
- .msg_iov = &iov,
- .msg_iovlen = 1,
- };
- int send_bytes;
-
- nh->nlmsg_pid = 0; /* communication with the kernel uses pid 0 */
- nh->nlmsg_seq = sn;
- send_bytes = sendmsg(nlsk_fd, &msg, 0);
- if (send_bytes < 0) {
- rte_errno = errno;
- return -rte_errno;
- }
- return send_bytes;
-}
-
-/**
- * Receive a message from the kernel on the Netlink socket, following
- * mlx5_nl_send().
- *
- * @param[in] nlsk_fd
- * The Netlink socket file descriptor used for communication.
- * @param[in] sn
- * Sequence number.
- * @param[in] cb
- * The callback function to call for each Netlink message received.
- * @param[in, out] arg
- * Custom arguments for the callback.
- *
- * @return
- * 0 on success, a negative errno value otherwise and rte_errno is set.
- */
-static int
-mlx5_nl_recv(int nlsk_fd, uint32_t sn, int (*cb)(struct nlmsghdr *, void *arg),
- void *arg)
-{
- struct sockaddr_nl sa;
- char buf[MLX5_RECV_BUF_SIZE];
- struct iovec iov = {
- .iov_base = buf,
- .iov_len = sizeof(buf),
- };
- struct msghdr msg = {
- .msg_name = &sa,
- .msg_namelen = sizeof(sa),
- .msg_iov = &iov,
- /* One message at a time */
- .msg_iovlen = 1,
- };
- int multipart = 0;
- int ret = 0;
-
- do {
- struct nlmsghdr *nh;
- int recv_bytes = 0;
-
- do {
- recv_bytes = recvmsg(nlsk_fd, &msg, 0);
- if (recv_bytes == -1) {
- rte_errno = errno;
- return -rte_errno;
- }
- nh = (struct nlmsghdr *)buf;
- } while (nh->nlmsg_seq != sn);
- for (;
- NLMSG_OK(nh, (unsigned int)recv_bytes);
- nh = NLMSG_NEXT(nh, recv_bytes)) {
- if (nh->nlmsg_type == NLMSG_ERROR) {
- struct nlmsgerr *err_data = NLMSG_DATA(nh);
-
- if (err_data->error < 0) {
- rte_errno = -err_data->error;
- return -rte_errno;
- }
- /* Ack message. */
- return 0;
- }
- /* Multi-part msgs and their trailing DONE message. */
- if (nh->nlmsg_flags & NLM_F_MULTI) {
- if (nh->nlmsg_type == NLMSG_DONE)
- return 0;
- multipart = 1;
- }
- if (cb) {
- ret = cb(nh, arg);
- if (ret < 0)
- return ret;
- }
- }
- } while (multipart);
- return ret;
-}
-
-/**
- * Parse Netlink message to retrieve the bridge MAC address.
- *
- * @param nh
- * Pointer to Netlink Message Header.
- * @param arg
- * PMD data register with this callback.
- *
- * @return
- * 0 on success, a negative errno value otherwise and rte_errno is set.
- */
-static int
-mlx5_nl_mac_addr_cb(struct nlmsghdr *nh, void *arg)
-{
- struct mlx5_nl_mac_addr *data = arg;
- struct ndmsg *r = NLMSG_DATA(nh);
- struct rtattr *attribute;
- int len;
-
- len = nh->nlmsg_len - NLMSG_LENGTH(sizeof(*r));
- for (attribute = MLX5_NDA_RTA(r);
- RTA_OK(attribute, len);
- attribute = RTA_NEXT(attribute, len)) {
- if (attribute->rta_type == NDA_LLADDR) {
- if (data->mac_n == MLX5_MAX_MAC_ADDRESSES) {
- DRV_LOG(WARNING,
- "not enough room to finalize the"
- " request");
- rte_errno = ENOMEM;
- return -rte_errno;
- }
-#ifndef NDEBUG
- char m[18];
-
- rte_ether_format_addr(m, 18, RTA_DATA(attribute));
- DRV_LOG(DEBUG, "bridge MAC address %s", m);
-#endif
- memcpy(&(*data->mac)[data->mac_n++],
- RTA_DATA(attribute), RTE_ETHER_ADDR_LEN);
- }
- }
- return 0;
-}
-
-/**
- * Get bridge MAC addresses.
- *
- * @param[in] nlsk_fd
- * Netlink socket file descriptor.
- * @param[in] iface_idx
- * Net device interface index.
- * @param mac[out]
- * Pointer to the array table of MAC addresses to fill.
- * Its size should be of MLX5_MAX_MAC_ADDRESSES.
- * @param mac_n[out]
- * Number of entries filled in MAC array.
- *
- * @return
- * 0 on success, a negative errno value otherwise and rte_errno is set.
- */
-static int
-mlx5_nl_mac_addr_list(int nlsk_fd, unsigned int iface_idx,
- struct rte_ether_addr (*mac)[], int *mac_n)
-{
- struct {
- struct nlmsghdr hdr;
- struct ifinfomsg ifm;
- } req = {
- .hdr = {
- .nlmsg_len = NLMSG_LENGTH(sizeof(struct ifinfomsg)),
- .nlmsg_type = RTM_GETNEIGH,
- .nlmsg_flags = NLM_F_DUMP | NLM_F_REQUEST,
- },
- .ifm = {
- .ifi_family = PF_BRIDGE,
- .ifi_index = iface_idx,
- },
- };
- struct mlx5_nl_mac_addr data = {
- .mac = mac,
- .mac_n = 0,
- };
- uint32_t sn = MLX5_NL_SN_GENERATE;
- int ret;
-
- if (nlsk_fd == -1)
- return 0;
- ret = mlx5_nl_request(nlsk_fd, &req.hdr, sn, &req.ifm,
- sizeof(struct ifinfomsg));
- if (ret < 0)
- goto error;
- ret = mlx5_nl_recv(nlsk_fd, sn, mlx5_nl_mac_addr_cb, &data);
- if (ret < 0)
- goto error;
- *mac_n = data.mac_n;
- return 0;
-error:
- DRV_LOG(DEBUG, "Interface %u cannot retrieve MAC address list %s",
- iface_idx, strerror(rte_errno));
- return -rte_errno;
-}
-
-/**
- * Modify the MAC address neighbour table with Netlink.
- *
- * @param[in] nlsk_fd
- * Netlink socket file descriptor.
- * @param[in] iface_idx
- * Net device interface index.
- * @param mac
- * MAC address to consider.
- * @param add
- * 1 to add the MAC address, 0 to remove the MAC address.
- *
- * @return
- * 0 on success, a negative errno value otherwise and rte_errno is set.
- */
-static int
-mlx5_nl_mac_addr_modify(int nlsk_fd, unsigned int iface_idx,
- struct rte_ether_addr *mac, int add)
-{
- struct {
- struct nlmsghdr hdr;
- struct ndmsg ndm;
- struct rtattr rta;
- uint8_t buffer[RTE_ETHER_ADDR_LEN];
- } req = {
- .hdr = {
- .nlmsg_len = NLMSG_LENGTH(sizeof(struct ndmsg)),
- .nlmsg_flags = NLM_F_REQUEST | NLM_F_CREATE |
- NLM_F_EXCL | NLM_F_ACK,
- .nlmsg_type = add ? RTM_NEWNEIGH : RTM_DELNEIGH,
- },
- .ndm = {
- .ndm_family = PF_BRIDGE,
- .ndm_state = NUD_NOARP | NUD_PERMANENT,
- .ndm_ifindex = iface_idx,
- .ndm_flags = NTF_SELF,
- },
- .rta = {
- .rta_type = NDA_LLADDR,
- .rta_len = RTA_LENGTH(RTE_ETHER_ADDR_LEN),
- },
- };
- uint32_t sn = MLX5_NL_SN_GENERATE;
- int ret;
-
- if (nlsk_fd == -1)
- return 0;
- memcpy(RTA_DATA(&req.rta), mac, RTE_ETHER_ADDR_LEN);
- req.hdr.nlmsg_len = NLMSG_ALIGN(req.hdr.nlmsg_len) +
- RTA_ALIGN(req.rta.rta_len);
- ret = mlx5_nl_send(nlsk_fd, &req.hdr, sn);
- if (ret < 0)
- goto error;
- ret = mlx5_nl_recv(nlsk_fd, sn, NULL, NULL);
- if (ret < 0)
- goto error;
- return 0;
-error:
- DRV_LOG(DEBUG,
- "Interface %u cannot %s MAC address"
- " %02X:%02X:%02X:%02X:%02X:%02X %s",
- iface_idx,
- add ? "add" : "remove",
- mac->addr_bytes[0], mac->addr_bytes[1],
- mac->addr_bytes[2], mac->addr_bytes[3],
- mac->addr_bytes[4], mac->addr_bytes[5],
- strerror(rte_errno));
- return -rte_errno;
-}
-
-/**
- * Modify the VF MAC address neighbour table with Netlink.
- *
- * @param[in] nlsk_fd
- * Netlink socket file descriptor.
- * @param[in] iface_idx
- * Net device interface index.
- * @param mac
- * MAC address to consider.
- * @param vf_index
- * VF index.
- *
- * @return
- * 0 on success, a negative errno value otherwise and rte_errno is set.
- */
-int
-mlx5_nl_vf_mac_addr_modify(int nlsk_fd, unsigned int iface_idx,
- struct rte_ether_addr *mac, int vf_index)
-{
- int ret;
- struct {
- struct nlmsghdr hdr;
- struct ifinfomsg ifm;
- struct rtattr vf_list_rta;
- struct rtattr vf_info_rta;
- struct rtattr vf_mac_rta;
- struct ifla_vf_mac ivm;
- } req = {
- .hdr = {
- .nlmsg_len = NLMSG_LENGTH(sizeof(struct ifinfomsg)),
- .nlmsg_flags = NLM_F_REQUEST | NLM_F_ACK,
- .nlmsg_type = RTM_BASE,
- },
- .ifm = {
- .ifi_index = iface_idx,
- },
- .vf_list_rta = {
- .rta_type = IFLA_VFINFO_LIST,
- .rta_len = RTA_ALIGN(RTA_LENGTH(0)),
- },
- .vf_info_rta = {
- .rta_type = IFLA_VF_INFO,
- .rta_len = RTA_ALIGN(RTA_LENGTH(0)),
- },
- .vf_mac_rta = {
- .rta_type = IFLA_VF_MAC,
- },
- };
- struct ifla_vf_mac ivm = {
- .vf = vf_index,
- };
- uint32_t sn = MLX5_NL_SN_GENERATE;
-
- memcpy(&ivm.mac, mac, RTE_ETHER_ADDR_LEN);
- memcpy(RTA_DATA(&req.vf_mac_rta), &ivm, sizeof(ivm));
-
- req.vf_mac_rta.rta_len = RTA_LENGTH(sizeof(ivm));
- req.hdr.nlmsg_len = NLMSG_ALIGN(req.hdr.nlmsg_len) +
- RTA_ALIGN(req.vf_list_rta.rta_len) +
- RTA_ALIGN(req.vf_info_rta.rta_len) +
- RTA_ALIGN(req.vf_mac_rta.rta_len);
- req.vf_list_rta.rta_len = RTE_PTR_DIFF(NLMSG_TAIL(&req.hdr),
- &req.vf_list_rta);
- req.vf_info_rta.rta_len = RTE_PTR_DIFF(NLMSG_TAIL(&req.hdr),
- &req.vf_info_rta);
-
- if (nlsk_fd < 0)
- return -1;
- ret = mlx5_nl_send(nlsk_fd, &req.hdr, sn);
- if (ret < 0)
- goto error;
- ret = mlx5_nl_recv(nlsk_fd, sn, NULL, NULL);
- if (ret < 0)
- goto error;
- return 0;
-error:
- DRV_LOG(ERR,
- "representor %u cannot set VF MAC address "
- "%02X:%02X:%02X:%02X:%02X:%02X : %s",
- vf_index,
- mac->addr_bytes[0], mac->addr_bytes[1],
- mac->addr_bytes[2], mac->addr_bytes[3],
- mac->addr_bytes[4], mac->addr_bytes[5],
- strerror(rte_errno));
- return -rte_errno;
-}
-
-/**
- * Add a MAC address.
- *
- * @param[in] nlsk_fd
- * Netlink socket file descriptor.
- * @param[in] iface_idx
- * Net device interface index.
- * @param mac_own
- * BITFIELD_DECLARE array to store the mac.
- * @param mac
- * MAC address to register.
- * @param index
- * MAC address index.
- *
- * @return
- * 0 on success, a negative errno value otherwise and rte_errno is set.
- */
-int
-mlx5_nl_mac_addr_add(int nlsk_fd, unsigned int iface_idx,
- uint64_t *mac_own, struct rte_ether_addr *mac,
- uint32_t index)
-{
- int ret;
-
- ret = mlx5_nl_mac_addr_modify(nlsk_fd, iface_idx, mac, 1);
- if (!ret)
- BITFIELD_SET(mac_own, index);
- if (ret == -EEXIST)
- return 0;
- return ret;
-}
-
-/**
- * Remove a MAC address.
- *
- * @param[in] nlsk_fd
- * Netlink socket file descriptor.
- * @param[in] iface_idx
- * Net device interface index.
- * @param mac_own
- * BITFIELD_DECLARE array to store the mac.
- * @param mac
- * MAC address to remove.
- * @param index
- * MAC address index.
- *
- * @return
- * 0 on success, a negative errno value otherwise and rte_errno is set.
- */
-int
-mlx5_nl_mac_addr_remove(int nlsk_fd, unsigned int iface_idx, uint64_t *mac_own,
- struct rte_ether_addr *mac, uint32_t index)
-{
- BITFIELD_RESET(mac_own, index);
- return mlx5_nl_mac_addr_modify(nlsk_fd, iface_idx, mac, 0);
-}
-
-/**
- * Synchronize Netlink bridge table to the internal table.
- *
- * @param[in] nlsk_fd
- * Netlink socket file descriptor.
- * @param[in] iface_idx
- * Net device interface index.
- * @param mac_addrs
- * Mac addresses array to sync.
- * @param n
- * @p mac_addrs array size.
- */
-void
-mlx5_nl_mac_addr_sync(int nlsk_fd, unsigned int iface_idx,
- struct rte_ether_addr *mac_addrs, int n)
-{
- struct rte_ether_addr macs[n];
- int macs_n = 0;
- int i;
- int ret;
-
- ret = mlx5_nl_mac_addr_list(nlsk_fd, iface_idx, &macs, &macs_n);
- if (ret)
- return;
- for (i = 0; i != macs_n; ++i) {
- int j;
-
- /* Verify the address is not in the array yet. */
- for (j = 0; j != n; ++j)
- if (rte_is_same_ether_addr(&macs[i], &mac_addrs[j]))
- break;
- if (j != n)
- continue;
- /* Find the first entry available. */
- for (j = 0; j != n; ++j) {
- if (rte_is_zero_ether_addr(&mac_addrs[j])) {
- mac_addrs[j] = macs[i];
- break;
- }
- }
- }
-}
-
-/**
- * Flush all added MAC addresses.
- *
- * @param[in] nlsk_fd
- * Netlink socket file descriptor.
- * @param[in] iface_idx
- * Net device interface index.
- * @param[in] mac_addrs
- * Mac addresses array to flush.
- * @param n
- * @p mac_addrs array size.
- * @param mac_own
- * BITFIELD_DECLARE array to store the mac.
- */
-void
-mlx5_nl_mac_addr_flush(int nlsk_fd, unsigned int iface_idx,
- struct rte_ether_addr *mac_addrs, int n,
- uint64_t *mac_own)
-{
- int i;
-
- for (i = n - 1; i >= 0; --i) {
- struct rte_ether_addr *m = &mac_addrs[i];
-
- if (BITFIELD_ISSET(mac_own, i))
- mlx5_nl_mac_addr_remove(nlsk_fd, iface_idx, mac_own, m,
- i);
- }
-}
-
-/**
- * Enable promiscuous / all multicast mode through Netlink.
- *
- * @param[in] nlsk_fd
- * Netlink socket file descriptor.
- * @param[in] iface_idx
- * Net device interface index.
- * @param flags
- * IFF_PROMISC for promiscuous, IFF_ALLMULTI for allmulti.
- * @param enable
- * Nonzero to enable, disable otherwise.
- *
- * @return
- * 0 on success, a negative errno value otherwise and rte_errno is set.
- */
-static int
-mlx5_nl_device_flags(int nlsk_fd, unsigned int iface_idx, uint32_t flags,
- int enable)
-{
- struct {
- struct nlmsghdr hdr;
- struct ifinfomsg ifi;
- } req = {
- .hdr = {
- .nlmsg_len = NLMSG_LENGTH(sizeof(struct ifinfomsg)),
- .nlmsg_type = RTM_NEWLINK,
- .nlmsg_flags = NLM_F_REQUEST,
- },
- .ifi = {
- .ifi_flags = enable ? flags : 0,
- .ifi_change = flags,
- .ifi_index = iface_idx,
- },
- };
- uint32_t sn = MLX5_NL_SN_GENERATE;
- int ret;
-
- assert(!(flags & ~(IFF_PROMISC | IFF_ALLMULTI)));
- if (nlsk_fd < 0)
- return 0;
- ret = mlx5_nl_send(nlsk_fd, &req.hdr, sn);
- if (ret < 0)
- return ret;
- return 0;
-}
-
-/**
- * Enable promiscuous mode through Netlink.
- *
- * @param[in] nlsk_fd
- * Netlink socket file descriptor.
- * @param[in] iface_idx
- * Net device interface index.
- * @param enable
- * Nonzero to enable, disable otherwise.
- *
- * @return
- * 0 on success, a negative errno value otherwise and rte_errno is set.
- */
-int
-mlx5_nl_promisc(int nlsk_fd, unsigned int iface_idx, int enable)
-{
- int ret = mlx5_nl_device_flags(nlsk_fd, iface_idx, IFF_PROMISC, enable);
-
- if (ret)
- DRV_LOG(DEBUG,
- "Interface %u cannot %s promisc mode: Netlink error %s",
- iface_idx, enable ? "enable" : "disable",
- strerror(rte_errno));
- return ret;
-}
-
-/**
- * Enable all multicast mode through Netlink.
- *
- * @param[in] nlsk_fd
- * Netlink socket file descriptor.
- * @param[in] iface_idx
- * Net device interface index.
- * @param enable
- * Nonzero to enable, disable otherwise.
- *
- * @return
- * 0 on success, a negative errno value otherwise and rte_errno is set.
- */
-int
-mlx5_nl_allmulti(int nlsk_fd, unsigned int iface_idx, int enable)
-{
- int ret = mlx5_nl_device_flags(nlsk_fd, iface_idx, IFF_ALLMULTI,
- enable);
-
- if (ret)
- DRV_LOG(DEBUG,
- "Interface %u cannot %s allmulti : Netlink error %s",
- iface_idx, enable ? "enable" : "disable",
- strerror(rte_errno));
- return ret;
-}
-
-/**
- * Process network interface information from Netlink message.
- *
- * @param nh
- * Pointer to Netlink message header.
- * @param arg
- * Opaque data pointer for this callback.
- *
- * @return
- * 0 on success, a negative errno value otherwise and rte_errno is set.
- */
-static int
-mlx5_nl_cmdget_cb(struct nlmsghdr *nh, void *arg)
-{
- struct mlx5_nl_ifindex_data *data = arg;
- struct mlx5_nl_ifindex_data local = {
- .flags = 0,
- };
- size_t off = NLMSG_HDRLEN;
-
- if (nh->nlmsg_type !=
- RDMA_NL_GET_TYPE(RDMA_NL_NLDEV, RDMA_NLDEV_CMD_GET) &&
- nh->nlmsg_type !=
- RDMA_NL_GET_TYPE(RDMA_NL_NLDEV, RDMA_NLDEV_CMD_PORT_GET))
- goto error;
- while (off < nh->nlmsg_len) {
- struct nlattr *na = (void *)((uintptr_t)nh + off);
- void *payload = (void *)((uintptr_t)na + NLA_HDRLEN);
-
- if (na->nla_len > nh->nlmsg_len - off)
- goto error;
- switch (na->nla_type) {
- case RDMA_NLDEV_ATTR_DEV_INDEX:
- local.ibindex = *(uint32_t *)payload;
- local.flags |= MLX5_NL_CMD_GET_IB_INDEX;
- break;
- case RDMA_NLDEV_ATTR_DEV_NAME:
- if (!strcmp(payload, data->name))
- local.flags |= MLX5_NL_CMD_GET_IB_NAME;
- break;
- case RDMA_NLDEV_ATTR_NDEV_INDEX:
- local.ifindex = *(uint32_t *)payload;
- local.flags |= MLX5_NL_CMD_GET_NET_INDEX;
- break;
- case RDMA_NLDEV_ATTR_PORT_INDEX:
- local.portnum = *(uint32_t *)payload;
- local.flags |= MLX5_NL_CMD_GET_PORT_INDEX;
- break;
- default:
- break;
- }
- off += NLA_ALIGN(na->nla_len);
- }
- /*
- * It is possible to have multiple messages for all
- * Infiniband devices in the system with appropriate name.
- * So we should gather parameters locally and copy to
- * query context only in case of coinciding device name.
- */
- if (local.flags & MLX5_NL_CMD_GET_IB_NAME) {
- data->flags = local.flags;
- data->ibindex = local.ibindex;
- data->ifindex = local.ifindex;
- data->portnum = local.portnum;
- }
- return 0;
-error:
- rte_errno = EINVAL;
- return -rte_errno;
-}
-
-/**
- * Get index of network interface associated with some IB device.
- *
- * This is the only somewhat safe method to avoid resorting to heuristics
- * when faced with port representors. Unfortunately it requires at least
- * Linux 4.17.
- *
- * @param nl
- * Netlink socket of the RDMA kind (NETLINK_RDMA).
- * @param[in] name
- * IB device name.
- * @param[in] pindex
- * IB device port index, starting from 1
- * @return
- * A valid (nonzero) interface index on success, 0 otherwise and rte_errno
- * is set.
- */
-unsigned int
-mlx5_nl_ifindex(int nl, const char *name, uint32_t pindex)
-{
- struct mlx5_nl_ifindex_data data = {
- .name = name,
- .flags = 0,
- .ibindex = 0, /* Determined during first pass. */
- .ifindex = 0, /* Determined during second pass. */
- };
- union {
- struct nlmsghdr nh;
- uint8_t buf[NLMSG_HDRLEN +
- NLA_HDRLEN + NLA_ALIGN(sizeof(data.ibindex)) +
- NLA_HDRLEN + NLA_ALIGN(sizeof(pindex))];
- } req = {
- .nh = {
- .nlmsg_len = NLMSG_LENGTH(0),
- .nlmsg_type = RDMA_NL_GET_TYPE(RDMA_NL_NLDEV,
- RDMA_NLDEV_CMD_GET),
- .nlmsg_flags = NLM_F_REQUEST | NLM_F_ACK | NLM_F_DUMP,
- },
- };
- struct nlattr *na;
- uint32_t sn = MLX5_NL_SN_GENERATE;
- int ret;
-
- ret = mlx5_nl_send(nl, &req.nh, sn);
- if (ret < 0)
- return 0;
- ret = mlx5_nl_recv(nl, sn, mlx5_nl_cmdget_cb, &data);
- if (ret < 0)
- return 0;
- if (!(data.flags & MLX5_NL_CMD_GET_IB_NAME) ||
- !(data.flags & MLX5_NL_CMD_GET_IB_INDEX))
- goto error;
- data.flags = 0;
- sn = MLX5_NL_SN_GENERATE;
- req.nh.nlmsg_type = RDMA_NL_GET_TYPE(RDMA_NL_NLDEV,
- RDMA_NLDEV_CMD_PORT_GET);
- req.nh.nlmsg_flags = NLM_F_REQUEST | NLM_F_ACK;
- req.nh.nlmsg_len = NLMSG_LENGTH(sizeof(req.buf) - NLMSG_HDRLEN);
- na = (void *)((uintptr_t)req.buf + NLMSG_HDRLEN);
- na->nla_len = NLA_HDRLEN + sizeof(data.ibindex);
- na->nla_type = RDMA_NLDEV_ATTR_DEV_INDEX;
- memcpy((void *)((uintptr_t)na + NLA_HDRLEN),
- &data.ibindex, sizeof(data.ibindex));
- na = (void *)((uintptr_t)na + NLA_ALIGN(na->nla_len));
- na->nla_len = NLA_HDRLEN + sizeof(pindex);
- na->nla_type = RDMA_NLDEV_ATTR_PORT_INDEX;
- memcpy((void *)((uintptr_t)na + NLA_HDRLEN),
- &pindex, sizeof(pindex));
- ret = mlx5_nl_send(nl, &req.nh, sn);
- if (ret < 0)
- return 0;
- ret = mlx5_nl_recv(nl, sn, mlx5_nl_cmdget_cb, &data);
- if (ret < 0)
- return 0;
- if (!(data.flags & MLX5_NL_CMD_GET_IB_NAME) ||
- !(data.flags & MLX5_NL_CMD_GET_IB_INDEX) ||
- !(data.flags & MLX5_NL_CMD_GET_NET_INDEX) ||
- !data.ifindex)
- goto error;
- return data.ifindex;
-error:
- rte_errno = ENODEV;
- return 0;
-}
-
-/**
- * Get the number of physical ports of given IB device.
- *
- * @param nl
- * Netlink socket of the RDMA kind (NETLINK_RDMA).
- * @param[in] name
- * IB device name.
- *
- * @return
- * A valid (nonzero) number of ports on success, 0 otherwise
- * and rte_errno is set.
- */
-unsigned int
-mlx5_nl_portnum(int nl, const char *name)
-{
- struct mlx5_nl_ifindex_data data = {
- .flags = 0,
- .name = name,
- .ifindex = 0,
- .portnum = 0,
- };
- struct nlmsghdr req = {
- .nlmsg_len = NLMSG_LENGTH(0),
- .nlmsg_type = RDMA_NL_GET_TYPE(RDMA_NL_NLDEV,
- RDMA_NLDEV_CMD_GET),
- .nlmsg_flags = NLM_F_REQUEST | NLM_F_ACK | NLM_F_DUMP,
- };
- uint32_t sn = MLX5_NL_SN_GENERATE;
- int ret;
-
- ret = mlx5_nl_send(nl, &req, sn);
- if (ret < 0)
- return 0;
- ret = mlx5_nl_recv(nl, sn, mlx5_nl_cmdget_cb, &data);
- if (ret < 0)
- return 0;
- if (!(data.flags & MLX5_NL_CMD_GET_IB_NAME) ||
- !(data.flags & MLX5_NL_CMD_GET_IB_INDEX) ||
- !(data.flags & MLX5_NL_CMD_GET_PORT_INDEX)) {
- rte_errno = ENODEV;
- return 0;
- }
- if (!data.portnum)
- rte_errno = EINVAL;
- return data.portnum;
-}
-
-/**
- * Analyze gathered port parameters via Netlink to recognize master
- * and representor devices for E-Switch configuration.
- *
- * @param[in] num_vf_set
- * flag of presence of number of VFs port attribute.
- * @param[inout] switch_info
- * Port information, including port name as a number and port name
- * type if recognized
- *
- * @return
- * master and representor flags are set in switch_info according to
- * recognized parameters (if any).
- */
-static void
-mlx5_nl_check_switch_info(bool num_vf_set,
- struct mlx5_switch_info *switch_info)
-{
- switch (switch_info->name_type) {
- case MLX5_PHYS_PORT_NAME_TYPE_UNKNOWN:
- /*
- * Name is not recognized, assume the master,
- * check the number of VFs key presence.
- */
- switch_info->master = num_vf_set;
- break;
- case MLX5_PHYS_PORT_NAME_TYPE_NOTSET:
- /*
- * Name is not set, this assumes the legacy naming
- * schema for master, just check if there is a
- * number of VFs key.
- */
- switch_info->master = num_vf_set;
- break;
- case MLX5_PHYS_PORT_NAME_TYPE_UPLINK:
- /* New uplink naming schema recognized. */
- switch_info->master = 1;
- break;
- case MLX5_PHYS_PORT_NAME_TYPE_LEGACY:
- /* Legacy representors naming schema. */
- switch_info->representor = !num_vf_set;
- break;
- case MLX5_PHYS_PORT_NAME_TYPE_PFVF:
- /* New representors naming schema. */
- switch_info->representor = 1;
- break;
- }
-}
-
-/**
- * Process switch information from Netlink message.
- *
- * @param nh
- * Pointer to Netlink message header.
- * @param arg
- * Opaque data pointer for this callback.
- *
- * @return
- * 0 on success, a negative errno value otherwise and rte_errno is set.
- */
-static int
-mlx5_nl_switch_info_cb(struct nlmsghdr *nh, void *arg)
-{
- struct mlx5_switch_info info = {
- .master = 0,
- .representor = 0,
- .name_type = MLX5_PHYS_PORT_NAME_TYPE_NOTSET,
- .port_name = 0,
- .switch_id = 0,
- };
- size_t off = NLMSG_LENGTH(sizeof(struct ifinfomsg));
- bool switch_id_set = false;
- bool num_vf_set = false;
-
- if (nh->nlmsg_type != RTM_NEWLINK)
- goto error;
- while (off < nh->nlmsg_len) {
- struct rtattr *ra = (void *)((uintptr_t)nh + off);
- void *payload = RTA_DATA(ra);
- unsigned int i;
-
- if (ra->rta_len > nh->nlmsg_len - off)
- goto error;
- switch (ra->rta_type) {
- case IFLA_NUM_VF:
- num_vf_set = true;
- break;
- case IFLA_PHYS_PORT_NAME:
- mlx5_translate_port_name((char *)payload, &info);
- break;
- case IFLA_PHYS_SWITCH_ID:
- info.switch_id = 0;
- for (i = 0; i < RTA_PAYLOAD(ra); ++i) {
- info.switch_id <<= 8;
- info.switch_id |= ((uint8_t *)payload)[i];
- }
- switch_id_set = true;
- break;
- }
- off += RTA_ALIGN(ra->rta_len);
- }
- if (switch_id_set) {
- /* We have some E-Switch configuration. */
- mlx5_nl_check_switch_info(num_vf_set, &info);
- }
- assert(!(info.master && info.representor));
- memcpy(arg, &info, sizeof(info));
- return 0;
-error:
- rte_errno = EINVAL;
- return -rte_errno;
-}
-
-/**
- * Get switch information associated with network interface.
- *
- * @param nl
- * Netlink socket of the ROUTE kind (NETLINK_ROUTE).
- * @param ifindex
- * Network interface index.
- * @param[out] info
- * Switch information object, populated in case of success.
- *
- * @return
- * 0 on success, a negative errno value otherwise and rte_errno is set.
- */
-int
-mlx5_nl_switch_info(int nl, unsigned int ifindex,
- struct mlx5_switch_info *info)
-{
- struct {
- struct nlmsghdr nh;
- struct ifinfomsg info;
- struct rtattr rta;
- uint32_t extmask;
- } req = {
- .nh = {
- .nlmsg_len = NLMSG_LENGTH
- (sizeof(req.info) +
- RTA_LENGTH(sizeof(uint32_t))),
- .nlmsg_type = RTM_GETLINK,
- .nlmsg_flags = NLM_F_REQUEST | NLM_F_ACK,
- },
- .info = {
- .ifi_family = AF_UNSPEC,
- .ifi_index = ifindex,
- },
- .rta = {
- .rta_type = IFLA_EXT_MASK,
- .rta_len = RTA_LENGTH(sizeof(int32_t)),
- },
- .extmask = RTE_LE32(1),
- };
- uint32_t sn = MLX5_NL_SN_GENERATE;
- int ret;
-
- ret = mlx5_nl_send(nl, &req.nh, sn);
- if (ret >= 0)
- ret = mlx5_nl_recv(nl, sn, mlx5_nl_switch_info_cb, info);
- if (info->master && info->representor) {
- DRV_LOG(ERR, "ifindex %u device is recognized as master"
- " and as representor", ifindex);
- rte_errno = ENODEV;
- ret = -rte_errno;
- }
- return ret;
-}
-
-/*
- * Delete VLAN network device by ifindex.
- *
- * @param[in] tcf
- * Context object initialized by mlx5_nl_vlan_vmwa_init().
- * @param[in] ifindex
- * Interface index of network device to delete.
- */
-void
-mlx5_nl_vlan_vmwa_delete(struct mlx5_nl_vlan_vmwa_context *vmwa,
- uint32_t ifindex)
-{
- uint32_t sn = MLX5_NL_SN_GENERATE;
- int ret;
- struct {
- struct nlmsghdr nh;
- struct ifinfomsg info;
- } req = {
- .nh = {
- .nlmsg_len = NLMSG_LENGTH(sizeof(struct ifinfomsg)),
- .nlmsg_type = RTM_DELLINK,
- .nlmsg_flags = NLM_F_REQUEST | NLM_F_ACK,
- },
- .info = {
- .ifi_family = AF_UNSPEC,
- .ifi_index = ifindex,
- },
- };
-
- if (ifindex) {
- ret = mlx5_nl_send(vmwa->nl_socket, &req.nh, sn);
- if (ret >= 0)
- ret = mlx5_nl_recv(vmwa->nl_socket, sn, NULL, NULL);
- if (ret < 0)
- DRV_LOG(WARNING, "netlink: error deleting VLAN WA"
- " ifindex %u, %d", ifindex, ret);
- }
-}
-
-/* Set of subroutines to build Netlink message. */
-static struct nlattr *
-nl_msg_tail(struct nlmsghdr *nlh)
-{
- return (struct nlattr *)
- (((uint8_t *)nlh) + NLMSG_ALIGN(nlh->nlmsg_len));
-}
-
-static void
-nl_attr_put(struct nlmsghdr *nlh, int type, const void *data, int alen)
-{
- struct nlattr *nla = nl_msg_tail(nlh);
-
- nla->nla_type = type;
- nla->nla_len = NLMSG_ALIGN(sizeof(struct nlattr) + alen);
- nlh->nlmsg_len = NLMSG_ALIGN(nlh->nlmsg_len) + nla->nla_len;
-
- if (alen)
- memcpy((uint8_t *)nla + sizeof(struct nlattr), data, alen);
-}
-
-static struct nlattr *
-nl_attr_nest_start(struct nlmsghdr *nlh, int type)
-{
- struct nlattr *nest = (struct nlattr *)nl_msg_tail(nlh);
-
- nl_attr_put(nlh, type, NULL, 0);
- return nest;
-}
-
-static void
-nl_attr_nest_end(struct nlmsghdr *nlh, struct nlattr *nest)
-{
- nest->nla_len = (uint8_t *)nl_msg_tail(nlh) - (uint8_t *)nest;
-}
-
-/*
- * Create network VLAN device with specified VLAN tag.
- *
- * @param[in] tcf
- * Context object initialized by mlx5_nl_vlan_vmwa_init().
- * @param[in] ifindex
- * Base network interface index.
- * @param[in] tag
- * VLAN tag for VLAN network device to create.
- */
-uint32_t
-mlx5_nl_vlan_vmwa_create(struct mlx5_nl_vlan_vmwa_context *vmwa,
- uint32_t ifindex, uint16_t tag)
-{
- struct nlmsghdr *nlh;
- struct ifinfomsg *ifm;
- char name[sizeof(MLX5_VMWA_VLAN_DEVICE_PFX) + 32];
-
- alignas(RTE_CACHE_LINE_SIZE)
- uint8_t buf[NLMSG_ALIGN(sizeof(struct nlmsghdr)) +
- NLMSG_ALIGN(sizeof(struct ifinfomsg)) +
- NLMSG_ALIGN(sizeof(struct nlattr)) * 8 +
- NLMSG_ALIGN(sizeof(uint32_t)) +
- NLMSG_ALIGN(sizeof(name)) +
- NLMSG_ALIGN(sizeof("vlan")) +
- NLMSG_ALIGN(sizeof(uint32_t)) +
- NLMSG_ALIGN(sizeof(uint16_t)) + 16];
- struct nlattr *na_info;
- struct nlattr *na_vlan;
- uint32_t sn = MLX5_NL_SN_GENERATE;
- int ret;
-
- memset(buf, 0, sizeof(buf));
- nlh = (struct nlmsghdr *)buf;
- nlh->nlmsg_len = sizeof(struct nlmsghdr);
- nlh->nlmsg_type = RTM_NEWLINK;
- nlh->nlmsg_flags = NLM_F_REQUEST | NLM_F_CREATE |
- NLM_F_EXCL | NLM_F_ACK;
- ifm = (struct ifinfomsg *)nl_msg_tail(nlh);
- nlh->nlmsg_len += sizeof(struct ifinfomsg);
- ifm->ifi_family = AF_UNSPEC;
- ifm->ifi_type = 0;
- ifm->ifi_index = 0;
- ifm->ifi_flags = IFF_UP;
- ifm->ifi_change = 0xffffffff;
- nl_attr_put(nlh, IFLA_LINK, &ifindex, sizeof(ifindex));
- ret = snprintf(name, sizeof(name), "%s.%u.%u",
- MLX5_VMWA_VLAN_DEVICE_PFX, ifindex, tag);
- nl_attr_put(nlh, IFLA_IFNAME, name, ret + 1);
- na_info = nl_attr_nest_start(nlh, IFLA_LINKINFO);
- nl_attr_put(nlh, IFLA_INFO_KIND, "vlan", sizeof("vlan"));
- na_vlan = nl_attr_nest_start(nlh, IFLA_INFO_DATA);
- nl_attr_put(nlh, IFLA_VLAN_ID, &tag, sizeof(tag));
- nl_attr_nest_end(nlh, na_vlan);
- nl_attr_nest_end(nlh, na_info);
- assert(sizeof(buf) >= nlh->nlmsg_len);
- ret = mlx5_nl_send(vmwa->nl_socket, nlh, sn);
- if (ret >= 0)
- ret = mlx5_nl_recv(vmwa->nl_socket, sn, NULL, NULL);
- if (ret < 0) {
- DRV_LOG(WARNING, "netlink: VLAN %s create failure (%d)", name,
- ret);
- }
- // Try to get ifindex of created or pre-existing device.
- ret = if_nametoindex(name);
- if (!ret) {
- DRV_LOG(WARNING, "VLAN %s failed to get index (%d)", name,
- errno);
- return 0;
- }
- return ret;
-}
deleted file mode 100644
@@ -1,72 +0,0 @@
-/* SPDX-License-Identifier: BSD-3-Clause
- * Copyright 2019 Mellanox Technologies, Ltd
- */
-
-#ifndef RTE_PMD_MLX5_NL_H_
-#define RTE_PMD_MLX5_NL_H_
-
-#include <linux/netlink.h>
-
-
-/* Recognized Infiniband device physical port name types. */
-enum mlx5_nl_phys_port_name_type {
- MLX5_PHYS_PORT_NAME_TYPE_NOTSET = 0, /* Not set. */
- MLX5_PHYS_PORT_NAME_TYPE_LEGACY, /* before kernel ver < 5.0 */
- MLX5_PHYS_PORT_NAME_TYPE_UPLINK, /* p0, kernel ver >= 5.0 */
- MLX5_PHYS_PORT_NAME_TYPE_PFVF, /* pf0vf0, kernel ver >= 5.0 */
- MLX5_PHYS_PORT_NAME_TYPE_UNKNOWN, /* Unrecognized. */
-};
-
-/** Switch information returned by mlx5_nl_switch_info(). */
-struct mlx5_switch_info {
- uint32_t master:1; /**< Master device. */
- uint32_t representor:1; /**< Representor device. */
- enum mlx5_nl_phys_port_name_type name_type; /** < Port name type. */
- int32_t pf_num; /**< PF number (valid for pfxvfx format only). */
- int32_t port_name; /**< Representor port name. */
- uint64_t switch_id; /**< Switch identifier. */
-};
-
-/* VLAN netdev for VLAN workaround. */
-struct mlx5_nl_vlan_dev {
- uint32_t refcnt;
- uint32_t ifindex; /**< Own interface index. */
-};
-
-/*
- * Array of VLAN devices created on the base of VF
- * used for workaround in virtual environments.
- */
-struct mlx5_nl_vlan_vmwa_context {
- int nl_socket;
- uint32_t vf_ifindex;
- struct mlx5_nl_vlan_dev vlan_dev[4096];
-};
-
-
-int mlx5_nl_init(int protocol);
-int mlx5_nl_mac_addr_add(int nlsk_fd, unsigned int iface_idx, uint64_t *mac_own,
- struct rte_ether_addr *mac, uint32_t index);
-int mlx5_nl_mac_addr_remove(int nlsk_fd, unsigned int iface_idx,
- uint64_t *mac_own, struct rte_ether_addr *mac,
- uint32_t index);
-void mlx5_nl_mac_addr_sync(int nlsk_fd, unsigned int iface_idx,
- struct rte_ether_addr *mac_addrs, int n);
-void mlx5_nl_mac_addr_flush(int nlsk_fd, unsigned int iface_idx,
- struct rte_ether_addr *mac_addrs, int n,
- uint64_t *mac_own);
-int mlx5_nl_promisc(int nlsk_fd, unsigned int iface_idx, int enable);
-int mlx5_nl_allmulti(int nlsk_fd, unsigned int iface_idx, int enable);
-unsigned int mlx5_nl_portnum(int nl, const char *name);
-unsigned int mlx5_nl_ifindex(int nl, const char *name, uint32_t pindex);
-int mlx5_nl_vf_mac_addr_modify(int nlsk_fd, unsigned int iface_idx,
- struct rte_ether_addr *mac, int vf_index);
-int mlx5_nl_switch_info(int nl, unsigned int ifindex,
- struct mlx5_switch_info *info);
-
-void mlx5_nl_vlan_vmwa_delete(struct mlx5_nl_vlan_vmwa_context *vmwa,
- uint32_t ifindex);
-uint32_t mlx5_nl_vlan_vmwa_create(struct mlx5_nl_vlan_vmwa_context *vmwa,
- uint32_t ifindex, uint16_t tag);
-
-#endif /* RTE_PMD_MLX5_NL_H_ */
@@ -33,11 +33,11 @@
#include <mlx5_glue.h>
#include <mlx5_devx_cmds.h>
+#include <mlx5_nl.h>
#include "mlx5.h"
#include "mlx5_autoconf.h"
#include "mlx5_rxtx.h"
-#include "mlx5_nl.h"
#include "mlx5_utils.h"
/**