diff --git a/doc/guides/rawdevs/octeontx2_ep.rst b/doc/guides/rawdevs/octeontx2_ep.rst
index 5f5ed01..2507fcf 100644
--- a/doc/guides/rawdevs/octeontx2_ep.rst
+++ b/doc/guides/rawdevs/octeontx2_ep.rst
@@ -39,3 +39,32 @@ entry `sriov_numvfs` for the corresponding PF driver.
 
 Once the required VFs are enabled, to be accessible from DPDK, VFs need to be
 bound to vfio-pci driver.
+
+Device Setup
+------------
+
+The OCTEON TX2 SDP End Point VF devices will need to be bound to a
+user-space IO driver for use. The script ``dpdk-devbind.py`` script
+included with DPDK can be used to view the state of the devices and to bind
+them to a suitable DPDK-supported kernel driver. When querying the status
+of the devices, they will appear under the category of "Misc (rawdev)
+devices", i.e. the command ``dpdk-devbind.py --status-dev misc`` can be
+used to see the state of those devices alone.
+
+Device Configuration
+--------------------
+
+Configuring SDP EP rawdev device is done using the ``rte_rawdev_configure()``
+API, which takes the mempool as parameter. PMD uses this pool to send/receive
+packets to/from the HW.
+
+The following code shows how the device is configured
+
+.. code-block:: c
+
+   struct sdp_rawdev_info config = {0};
+   struct rte_rawdev_info rdev_info = {.dev_private = &config};
+   config.enqdeq_mpool = (void *)rte_mempool_create(...);
+
+   rte_rawdev_configure(dev_id, (rte_rawdev_obj_t)&rdev_info);
+
diff --git a/drivers/common/octeontx2/hw/otx2_sdp.h b/drivers/common/octeontx2/hw/otx2_sdp.h
new file mode 100644
index 0000000..7e03317
--- /dev/null
+++ b/drivers/common/octeontx2/hw/otx2_sdp.h
@@ -0,0 +1,184 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(C) 2019 Marvell International Ltd.
+ */
+
+#ifndef __OTX2_SDP_HW_H_
+#define __OTX2_SDP_HW_H_
+
+/* SDP VF IOQs */
+#define SDP_MIN_RINGS_PER_VF        (1)
+#define SDP_MAX_RINGS_PER_VF        (8)
+
+/* SDP VF IQ configuration */
+#define SDP_VF_MAX_IQ_DESCRIPTORS   (512)
+#define SDP_VF_MIN_IQ_DESCRIPTORS   (128)
+
+#define SDP_VF_DB_MIN               (1)
+#define SDP_VF_DB_TIMEOUT           (1)
+#define SDP_VF_INTR_THRESHOLD       (0xFFFFFFFF)
+
+#define SDP_VF_64BYTE_INSTR         (64)
+#define SDP_VF_32BYTE_INSTR         (32)
+
+/* SDP VF OQ configuration */
+#define SDP_VF_MAX_OQ_DESCRIPTORS   (512)
+#define SDP_VF_MIN_OQ_DESCRIPTORS   (128)
+#define SDP_VF_OQ_BUF_SIZE          (2048)
+#define SDP_VF_OQ_REFIL_THRESHOLD   (16)
+
+#define SDP_VF_OQ_INFOPTR_MODE      (1)
+#define SDP_VF_OQ_BUFPTR_MODE       (0)
+
+#define SDP_VF_OQ_INTR_PKT          (1)
+#define SDP_VF_OQ_INTR_TIME         (10)
+#define SDP_VF_CFG_IO_QUEUES        SDP_MAX_RINGS_PER_VF
+
+/* Wait time in milliseconds for FLR */
+#define SDP_VF_PCI_FLR_WAIT         (100)
+#define SDP_VF_BUSY_LOOP_COUNT      (10000)
+
+#define SDP_VF_MAX_IO_QUEUES        SDP_MAX_RINGS_PER_VF
+#define SDP_VF_MIN_IO_QUEUES        SDP_MIN_RINGS_PER_VF
+
+/* SDP VF IOQs per rawdev */
+#define SDP_VF_MAX_IOQS_PER_RAWDEV      SDP_VF_MAX_IO_QUEUES
+#define SDP_VF_DEFAULT_IOQS_PER_RAWDEV  SDP_VF_MIN_IO_QUEUES
+
+/* SDP VF Register definitions */
+#define SDP_VF_RING_OFFSET                (0x1ull << 17)
+
+/* SDP VF IQ Registers */
+#define SDP_VF_R_IN_CONTROL_START         (0x10000)
+#define SDP_VF_R_IN_ENABLE_START          (0x10010)
+#define SDP_VF_R_IN_INSTR_BADDR_START     (0x10020)
+#define SDP_VF_R_IN_INSTR_RSIZE_START     (0x10030)
+#define SDP_VF_R_IN_INSTR_DBELL_START     (0x10040)
+#define SDP_VF_R_IN_CNTS_START            (0x10050)
+#define SDP_VF_R_IN_INT_LEVELS_START      (0x10060)
+#define SDP_VF_R_IN_PKT_CNT_START         (0x10080)
+#define SDP_VF_R_IN_BYTE_CNT_START        (0x10090)
+
+#define SDP_VF_R_IN_CONTROL(ring)  \
+	(SDP_VF_R_IN_CONTROL_START + ((ring) * SDP_VF_RING_OFFSET))
+
+#define SDP_VF_R_IN_ENABLE(ring)   \
+	(SDP_VF_R_IN_ENABLE_START + ((ring) * SDP_VF_RING_OFFSET))
+
+#define SDP_VF_R_IN_INSTR_BADDR(ring)   \
+	(SDP_VF_R_IN_INSTR_BADDR_START + ((ring) * SDP_VF_RING_OFFSET))
+
+#define SDP_VF_R_IN_INSTR_RSIZE(ring)   \
+	(SDP_VF_R_IN_INSTR_RSIZE_START + ((ring) * SDP_VF_RING_OFFSET))
+
+#define SDP_VF_R_IN_INSTR_DBELL(ring)   \
+	(SDP_VF_R_IN_INSTR_DBELL_START + ((ring) * SDP_VF_RING_OFFSET))
+
+#define SDP_VF_R_IN_CNTS(ring)          \
+	(SDP_VF_R_IN_CNTS_START + ((ring) * SDP_VF_RING_OFFSET))
+
+#define SDP_VF_R_IN_INT_LEVELS(ring)    \
+	(SDP_VF_R_IN_INT_LEVELS_START + ((ring) * SDP_VF_RING_OFFSET))
+
+#define SDP_VF_R_IN_PKT_CNT(ring)       \
+	(SDP_VF_R_IN_PKT_CNT_START + ((ring) * SDP_VF_RING_OFFSET))
+
+#define SDP_VF_R_IN_BYTE_CNT(ring)          \
+	(SDP_VF_R_IN_BYTE_CNT_START + ((ring) * SDP_VF_RING_OFFSET))
+
+/* SDP VF IQ Masks */
+#define SDP_VF_R_IN_CTL_RPVF_MASK       (0xF)
+#define	SDP_VF_R_IN_CTL_RPVF_POS        (48)
+
+#define SDP_VF_R_IN_CTL_IDLE            (0x1ull << 28)
+#define SDP_VF_R_IN_CTL_RDSIZE          (0x3ull << 25) /* Setting to max(4) */
+#define SDP_VF_R_IN_CTL_IS_64B          (0x1ull << 24)
+#define SDP_VF_R_IN_CTL_D_NSR           (0x1ull << 8)
+#define SDP_VF_R_IN_CTL_D_ESR           (0x1ull << 6)
+#define SDP_VF_R_IN_CTL_D_ROR           (0x1ull << 5)
+#define SDP_VF_R_IN_CTL_NSR             (0x1ull << 3)
+#define SDP_VF_R_IN_CTL_ESR             (0x1ull << 1)
+#define SDP_VF_R_IN_CTL_ROR             (0x1ull << 0)
+
+#define SDP_VF_R_IN_CTL_MASK  \
+	(SDP_VF_R_IN_CTL_RDSIZE | SDP_VF_R_IN_CTL_IS_64B)
+
+/* SDP VF OQ Registers */
+#define SDP_VF_R_OUT_CNTS_START              (0x10100)
+#define SDP_VF_R_OUT_INT_LEVELS_START        (0x10110)
+#define SDP_VF_R_OUT_SLIST_BADDR_START       (0x10120)
+#define SDP_VF_R_OUT_SLIST_RSIZE_START       (0x10130)
+#define SDP_VF_R_OUT_SLIST_DBELL_START       (0x10140)
+#define SDP_VF_R_OUT_CONTROL_START           (0x10150)
+#define SDP_VF_R_OUT_ENABLE_START            (0x10160)
+#define SDP_VF_R_OUT_PKT_CNT_START           (0x10180)
+#define SDP_VF_R_OUT_BYTE_CNT_START          (0x10190)
+
+#define SDP_VF_R_OUT_CONTROL(ring)    \
+	(SDP_VF_R_OUT_CONTROL_START + ((ring) * SDP_VF_RING_OFFSET))
+
+#define SDP_VF_R_OUT_ENABLE(ring)     \
+	(SDP_VF_R_OUT_ENABLE_START + ((ring) * SDP_VF_RING_OFFSET))
+
+#define SDP_VF_R_OUT_SLIST_BADDR(ring)  \
+	(SDP_VF_R_OUT_SLIST_BADDR_START + ((ring) * SDP_VF_RING_OFFSET))
+
+#define SDP_VF_R_OUT_SLIST_RSIZE(ring)  \
+	(SDP_VF_R_OUT_SLIST_RSIZE_START + ((ring) * SDP_VF_RING_OFFSET))
+
+#define SDP_VF_R_OUT_SLIST_DBELL(ring)  \
+	(SDP_VF_R_OUT_SLIST_DBELL_START + ((ring) * SDP_VF_RING_OFFSET))
+
+#define SDP_VF_R_OUT_CNTS(ring)   \
+	(SDP_VF_R_OUT_CNTS_START + ((ring) * SDP_VF_RING_OFFSET))
+
+#define SDP_VF_R_OUT_INT_LEVELS(ring)   \
+	(SDP_VF_R_OUT_INT_LEVELS_START + ((ring) * SDP_VF_RING_OFFSET))
+
+#define SDP_VF_R_OUT_PKT_CNT(ring)   \
+	(SDP_VF_R_OUT_PKT_CNT_START + ((ring) * SDP_VF_RING_OFFSET))
+
+#define SDP_VF_R_OUT_BYTE_CNT(ring)   \
+	(SDP_VF_R_OUT_BYTE_CNT_START + ((ring) * SDP_VF_RING_OFFSET))
+
+/* SDP VF OQ Masks */
+#define SDP_VF_R_OUT_CTL_IDLE         (1ull << 40)
+#define SDP_VF_R_OUT_CTL_ES_I         (1ull << 34)
+#define SDP_VF_R_OUT_CTL_NSR_I        (1ull << 33)
+#define SDP_VF_R_OUT_CTL_ROR_I        (1ull << 32)
+#define SDP_VF_R_OUT_CTL_ES_D         (1ull << 30)
+#define SDP_VF_R_OUT_CTL_NSR_D        (1ull << 29)
+#define SDP_VF_R_OUT_CTL_ROR_D        (1ull << 28)
+#define SDP_VF_R_OUT_CTL_ES_P         (1ull << 26)
+#define SDP_VF_R_OUT_CTL_NSR_P        (1ull << 25)
+#define SDP_VF_R_OUT_CTL_ROR_P        (1ull << 24)
+#define SDP_VF_R_OUT_CTL_IMODE        (1ull << 23)
+
+#define SDP_VF_R_OUT_INT_LEVELS_BMODE     (1ull << 63)
+#define SDP_VF_R_OUT_INT_LEVELS_TIMET     (32)
+
+/* SDP Instruction Header */
+struct sdp_instr_ih {
+	/* Data Len */
+	uint64_t tlen:16;
+
+	/* Reserved1 */
+	uint64_t rsvd1:20;
+
+	/* PKIND for SDP */
+	uint64_t pkind:6;
+
+	/* Front Data size */
+	uint64_t fsz:6;
+
+	/* No. of entries in gather list */
+	uint64_t gsz:14;
+
+	/* Gather indicator */
+	uint64_t gather:1;
+
+	/* Reserved2 */
+	uint64_t rsvd2:1;
+};
+
+#endif /* __OTX2_SDP_HW_H_  */
+
diff --git a/drivers/common/octeontx2/otx2_common.c b/drivers/common/octeontx2/otx2_common.c
index 7e45366..1a257cf 100644
--- a/drivers/common/octeontx2/otx2_common.c
+++ b/drivers/common/octeontx2/otx2_common.c
@@ -205,6 +205,10 @@ int otx2_npa_lf_obj_ref(void)
  * @internal
  */
 int otx2_logtype_dpi;
+/**
+ * @internal
+ */
+int otx2_logtype_ep;
 
 RTE_INIT(otx2_log_init);
 static void
@@ -245,4 +249,9 @@ int otx2_npa_lf_obj_ref(void)
 	otx2_logtype_dpi = rte_log_register("pmd.raw.octeontx2.dpi");
 	if (otx2_logtype_dpi >= 0)
 		rte_log_set_level(otx2_logtype_dpi, RTE_LOG_NOTICE);
+
+	otx2_logtype_ep = rte_log_register("pmd.raw.octeontx2.ep");
+	if (otx2_logtype_ep >= 0)
+		rte_log_set_level(otx2_logtype_ep, RTE_LOG_NOTICE);
+
 }
diff --git a/drivers/common/octeontx2/otx2_common.h b/drivers/common/octeontx2/otx2_common.h
index f62c45d..6bc55ca 100644
--- a/drivers/common/octeontx2/otx2_common.h
+++ b/drivers/common/octeontx2/otx2_common.h
@@ -16,6 +16,7 @@
 #include "hw/otx2_nix.h"
 #include "hw/otx2_npc.h"
 #include "hw/otx2_npa.h"
+#include "hw/otx2_sdp.h"
 #include "hw/otx2_sso.h"
 #include "hw/otx2_ssow.h"
 #include "hw/otx2_tim.h"
@@ -85,6 +86,7 @@ struct otx2_idev_cfg {
 extern int otx2_logtype_tm;
 extern int otx2_logtype_tim;
 extern int otx2_logtype_dpi;
+extern int otx2_logtype_ep;
 
 #define otx2_err(fmt, args...)			\
 	RTE_LOG(ERR, PMD, "%s():%u " fmt "\n",	\
@@ -107,6 +109,7 @@ struct otx2_idev_cfg {
 #define otx2_tm_dbg(fmt, ...) otx2_dbg(tm, fmt, ##__VA_ARGS__)
 #define otx2_tim_dbg(fmt, ...) otx2_dbg(tim, fmt, ##__VA_ARGS__)
 #define otx2_dpi_dbg(fmt, ...) otx2_dbg(dpi, fmt, ##__VA_ARGS__)
+#define otx2_sdp_dbg(fmt, ...) otx2_dbg(ep, fmt, ##__VA_ARGS__)
 
 /* PCI IDs */
 #define PCI_VENDOR_ID_CAVIUM			0x177D
@@ -121,6 +124,7 @@ struct otx2_idev_cfg {
 #define PCI_DEVID_OCTEONTX2_RVU_CPT_VF		0xA0FE
 #define PCI_DEVID_OCTEONTX2_RVU_AF_VF		0xA0f8
 #define PCI_DEVID_OCTEONTX2_DPI_VF		0xA081
+#define PCI_DEVID_OCTEONTX2_EP_VF		0xB203 /* OCTEON TX2 EP mode */
 #define PCI_DEVID_OCTEONTX2_RVU_SDP_PF		0xA0f6
 #define PCI_DEVID_OCTEONTX2_RVU_SDP_VF		0xA0f7
 
diff --git a/drivers/common/octeontx2/rte_common_octeontx2_version.map b/drivers/common/octeontx2/rte_common_octeontx2_version.map
index adad21a..a51d719 100644
--- a/drivers/common/octeontx2/rte_common_octeontx2_version.map
+++ b/drivers/common/octeontx2/rte_common_octeontx2_version.map
@@ -33,3 +33,9 @@ DPDK_20.0 {
 
 	local: *;
 };
+
+EXPERIMENTAL {
+	global:
+
+	otx2_logtype_ep;
+};
diff --git a/drivers/raw/octeontx2_ep/Makefile b/drivers/raw/octeontx2_ep/Makefile
index 8cec6bd..02853fb 100644
--- a/drivers/raw/octeontx2_ep/Makefile
+++ b/drivers/raw/octeontx2_ep/Makefile
@@ -36,5 +36,8 @@ LIBABIVER := 1
 # All source are stored in SRCS-y
 #
 SRCS-$(CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_EP_RAWDEV) += otx2_ep_rawdev.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_EP_RAWDEV) += otx2_ep_enqdeq.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_EP_RAWDEV) += otx2_ep_vf.c
+
 
 include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/drivers/raw/octeontx2_ep/meson.build b/drivers/raw/octeontx2_ep/meson.build
index e513131..99e6c6d 100644
--- a/drivers/raw/octeontx2_ep/meson.build
+++ b/drivers/raw/octeontx2_ep/meson.build
@@ -3,4 +3,6 @@
 #
 
 deps += ['bus_pci', 'common_octeontx2', 'rawdev']
-sources = files('otx2_ep_rawdev.c')
+sources = files('otx2_ep_rawdev.c',
+		'otx2_ep_enqdeq.c',
+		'otx2_ep_vf.c')
diff --git a/drivers/raw/octeontx2_ep/otx2_ep_enqdeq.c b/drivers/raw/octeontx2_ep/otx2_ep_enqdeq.c
new file mode 100644
index 0000000..8857004
--- /dev/null
+++ b/drivers/raw/octeontx2_ep/otx2_ep_enqdeq.c
@@ -0,0 +1,294 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(C) 2019 Marvell International Ltd.
+ */
+
+#include <string.h>
+#include <unistd.h>
+#include <dirent.h>
+#include <fcntl.h>
+
+#include <rte_bus.h>
+#include <rte_bus_pci.h>
+#include <rte_eal.h>
+#include <rte_lcore.h>
+#include <rte_mempool.h>
+#include <rte_pci.h>
+
+#include <rte_common.h>
+#include <rte_rawdev.h>
+#include <rte_rawdev_pmd.h>
+
+#include "otx2_common.h"
+#include "otx2_ep_enqdeq.h"
+
+/* IQ initialization */
+static int
+sdp_init_instr_queue(struct sdp_device *sdpvf, int iq_no)
+{
+	const struct sdp_config *conf;
+	struct sdp_instr_queue *iq;
+	uint32_t q_size;
+
+	conf = sdpvf->conf;
+	iq = sdpvf->instr_queue[iq_no];
+	q_size = conf->iq.instr_type * conf->num_iqdef_descs;
+
+	/* IQ memory creation for Instruction submission to OCTEON TX2 */
+	iq->iq_mz = rte_memzone_reserve_aligned("iqmz",
+					q_size,
+					rte_socket_id(),
+					RTE_MEMZONE_IOVA_CONTIG,
+					RTE_CACHE_LINE_SIZE);
+	if (iq->iq_mz == NULL) {
+		otx2_err("IQ[%d] memzone alloc failed", iq_no);
+		goto iq_init_fail;
+	}
+
+	iq->base_addr_dma = iq->iq_mz->iova;
+	iq->base_addr = (uint8_t *)iq->iq_mz->addr;
+
+	if (conf->num_iqdef_descs & (conf->num_iqdef_descs - 1)) {
+		otx2_err("IQ[%d] descs not in power of 2", iq_no);
+		goto iq_init_fail;
+	}
+
+	iq->nb_desc = conf->num_iqdef_descs;
+
+	/* Create a IQ request list to hold requests that have been
+	 * posted to OCTEON TX2. This list will be used for freeing the IQ
+	 * data buffer(s) later once the OCTEON TX2 fetched the requests.
+	 */
+	iq->req_list = rte_zmalloc_socket("request_list",
+			(iq->nb_desc * SDP_IQREQ_LIST_SIZE),
+			RTE_CACHE_LINE_SIZE,
+			rte_socket_id());
+	if (iq->req_list == NULL) {
+		otx2_err("IQ[%d] req_list alloc failed", iq_no);
+		goto iq_init_fail;
+	}
+
+	otx2_info("IQ[%d]: base: %p basedma: %lx count: %d",
+		     iq_no, iq->base_addr, (unsigned long)iq->base_addr_dma,
+		     iq->nb_desc);
+
+	iq->sdp_dev = sdpvf;
+	iq->q_no = iq_no;
+	iq->fill_cnt = 0;
+	iq->host_write_index = 0;
+	iq->otx_read_index = 0;
+	iq->flush_index = 0;
+
+	/* Initialize the spinlock for this instruction queue */
+	rte_spinlock_init(&iq->lock);
+	rte_spinlock_init(&iq->post_lock);
+
+	rte_atomic64_clear(&iq->iq_flush_running);
+
+	sdpvf->io_qmask.iq |= (1ull << iq_no);
+
+	/* Set 32B/64B mode for each input queue */
+	if (conf->iq.instr_type == 64)
+		sdpvf->io_qmask.iq64B |= (1ull << iq_no);
+
+	iq->iqcmd_64B = (conf->iq.instr_type == 64);
+
+	/* Set up IQ registers */
+	sdpvf->fn_list.setup_iq_regs(sdpvf, iq_no);
+
+	return 0;
+
+iq_init_fail:
+	return -ENOMEM;
+
+}
+
+int
+sdp_setup_iqs(struct sdp_device *sdpvf, uint32_t iq_no)
+{
+	struct sdp_instr_queue *iq;
+
+	iq = (struct sdp_instr_queue *)rte_zmalloc("sdp_IQ", sizeof(*iq),
+						RTE_CACHE_LINE_SIZE);
+	if (iq == NULL)
+		return -ENOMEM;
+
+	sdpvf->instr_queue[iq_no] = iq;
+
+	if (sdp_init_instr_queue(sdpvf, iq_no)) {
+		otx2_err("IQ init is failed");
+		goto delete_IQ;
+	}
+	otx2_info("IQ[%d] is created.", sdpvf->num_iqs);
+
+	sdpvf->num_iqs++;
+
+
+	return 0;
+
+delete_IQ:
+	return -ENOMEM;
+}
+
+static void
+sdp_droq_reset_indices(struct sdp_droq *droq)
+{
+	droq->read_idx  = 0;
+	droq->write_idx = 0;
+	droq->refill_idx = 0;
+	droq->refill_count = 0;
+	rte_atomic64_set(&droq->pkts_pending, 0);
+}
+
+static int
+sdp_droq_setup_ring_buffers(struct sdp_device *sdpvf,
+		struct sdp_droq *droq)
+{
+	struct sdp_droq_desc *desc_ring = droq->desc_ring;
+	uint32_t idx;
+	void *buf;
+
+	for (idx = 0; idx < droq->nb_desc; idx++) {
+		rte_mempool_get(sdpvf->enqdeq_mpool, &buf);
+		if (buf == NULL) {
+			otx2_err("OQ buffer alloc failed");
+			/* sdp_droq_destroy_ring_buffers(droq);*/
+			return -ENOMEM;
+		}
+
+		droq->recv_buf_list[idx].buffer = buf;
+		droq->info_list[idx].length = 0;
+
+		/* Map ring buffers into memory */
+		desc_ring[idx].info_ptr = (uint64_t)(droq->info_list_dma +
+			(idx * SDP_DROQ_INFO_SIZE));
+
+		desc_ring[idx].buffer_ptr = rte_mem_virt2iova(buf);
+	}
+
+	sdp_droq_reset_indices(droq);
+
+	return 0;
+}
+
+static void *
+sdp_alloc_info_buffer(struct sdp_device *sdpvf __rte_unused,
+	struct sdp_droq *droq)
+{
+	droq->info_mz = rte_memzone_reserve_aligned("OQ_info_list",
+				(droq->nb_desc * SDP_DROQ_INFO_SIZE),
+				rte_socket_id(),
+				RTE_MEMZONE_IOVA_CONTIG,
+				RTE_CACHE_LINE_SIZE);
+
+	if (droq->info_mz == NULL)
+		return NULL;
+
+	droq->info_list_dma = droq->info_mz->iova;
+	droq->info_alloc_size = droq->info_mz->len;
+	droq->info_base_addr = (size_t)droq->info_mz->addr;
+
+	return droq->info_mz->addr;
+}
+
+/* OQ initialization */
+static int
+sdp_init_droq(struct sdp_device *sdpvf, uint32_t q_no)
+{
+	const struct sdp_config *conf = sdpvf->conf;
+	uint32_t c_refill_threshold;
+	uint32_t desc_ring_size;
+	struct sdp_droq *droq;
+
+	otx2_info("OQ[%d] Init start", q_no);
+
+	droq = sdpvf->droq[q_no];
+	droq->sdp_dev = sdpvf;
+	droq->q_no = q_no;
+
+	c_refill_threshold = conf->oq.refill_threshold;
+	droq->nb_desc      = conf->num_oqdef_descs;
+	droq->buffer_size  = conf->oqdef_buf_size;
+
+	/* OQ desc_ring set up */
+	desc_ring_size = droq->nb_desc * SDP_DROQ_DESC_SIZE;
+	droq->desc_ring_mz = rte_memzone_reserve_aligned("sdp_oqmz",
+						desc_ring_size,
+						rte_socket_id(),
+						RTE_MEMZONE_IOVA_CONTIG,
+						RTE_CACHE_LINE_SIZE);
+
+	if (droq->desc_ring_mz == NULL) {
+		otx2_err("OQ:%d desc_ring allocation failed", q_no);
+		goto init_droq_fail;
+	}
+
+	droq->desc_ring_dma = droq->desc_ring_mz->iova;
+	droq->desc_ring = (struct sdp_droq_desc *)droq->desc_ring_mz->addr;
+
+	otx2_sdp_dbg("OQ[%d]: desc_ring: virt: 0x%p, dma: %lx",
+		    q_no, droq->desc_ring, (unsigned long)droq->desc_ring_dma);
+	otx2_sdp_dbg("OQ[%d]: num_desc: %d", q_no, droq->nb_desc);
+
+
+	/* OQ info_list set up */
+	droq->info_list = sdp_alloc_info_buffer(sdpvf, droq);
+	if (droq->info_list == NULL) {
+		otx2_err("memory allocation failed for OQ[%d] info_list", q_no);
+		goto init_droq_fail;
+	}
+
+	/* OQ buf_list set up */
+	droq->recv_buf_list = rte_zmalloc_socket("recv_buf_list",
+				(droq->nb_desc * SDP_DROQ_RECVBUF_SIZE),
+				 RTE_CACHE_LINE_SIZE, rte_socket_id());
+	if (droq->recv_buf_list == NULL) {
+		otx2_err("OQ recv_buf_list alloc failed");
+		goto init_droq_fail;
+	}
+
+	if (sdp_droq_setup_ring_buffers(sdpvf, droq))
+		goto init_droq_fail;
+
+	droq->refill_threshold = c_refill_threshold;
+	rte_spinlock_init(&droq->lock);
+
+
+	/* Set up OQ registers */
+	sdpvf->fn_list.setup_oq_regs(sdpvf, q_no);
+
+	sdpvf->io_qmask.oq |= (1ull << q_no);
+
+	return 0;
+
+init_droq_fail:
+	return -ENOMEM;
+}
+
+/* OQ configuration and setup */
+int
+sdp_setup_oqs(struct sdp_device *sdpvf, uint32_t oq_no)
+{
+	struct sdp_droq *droq;
+
+	/* Allocate new droq. */
+	droq = (struct sdp_droq *)rte_zmalloc("sdp_OQ",
+				sizeof(*droq), RTE_CACHE_LINE_SIZE);
+	if (droq == NULL) {
+		otx2_err("Droq[%d] Creation Failed", oq_no);
+		return -ENOMEM;
+	}
+	sdpvf->droq[oq_no] = droq;
+
+	if (sdp_init_droq(sdpvf, oq_no)) {
+		otx2_err("Droq[%d] Initialization failed", oq_no);
+		goto delete_OQ;
+	}
+	otx2_info("OQ[%d] is created.", oq_no);
+
+	sdpvf->num_oqs++;
+
+	return 0;
+
+delete_OQ:
+	return -ENOMEM;
+}
diff --git a/drivers/raw/octeontx2_ep/otx2_ep_enqdeq.h b/drivers/raw/octeontx2_ep/otx2_ep_enqdeq.h
new file mode 100644
index 0000000..4c28283
--- /dev/null
+++ b/drivers/raw/octeontx2_ep/otx2_ep_enqdeq.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(C) 2019 Marvell International Ltd.
+ */
+
+#ifndef _OTX2_EP_ENQDEQ_H_
+#define _OTX2_EP_ENQDEQ_H_
+
+#include <rte_byteorder.h>
+#include "otx2_ep_rawdev.h"
+
+#endif /* _OTX2_EP_ENQDEQ_H_ */
diff --git a/drivers/raw/octeontx2_ep/otx2_ep_rawdev.c b/drivers/raw/octeontx2_ep/otx2_ep_rawdev.c
index 04b4fac..5db9b50 100644
--- a/drivers/raw/octeontx2_ep/otx2_ep_rawdev.c
+++ b/drivers/raw/octeontx2_ep/otx2_ep_rawdev.c
@@ -17,6 +17,7 @@
 
 #include "otx2_common.h"
 #include "otx2_ep_rawdev.h"
+#include "otx2_ep_vf.h"
 
 static const struct rte_pci_id pci_sdp_vf_map[] = {
 	{
@@ -28,6 +29,152 @@
 	},
 };
 
+/* SDP_VF default configuration */
+const struct sdp_config default_sdp_conf = {
+	/* IQ attributes */
+	.iq                        = {
+		.max_iqs           = SDP_VF_CFG_IO_QUEUES,
+		.instr_type        = SDP_VF_64BYTE_INSTR,
+		.pending_list_size = (SDP_VF_MAX_IQ_DESCRIPTORS *
+				      SDP_VF_CFG_IO_QUEUES),
+	},
+
+	/* OQ attributes */
+	.oq                        = {
+		.max_oqs           = SDP_VF_CFG_IO_QUEUES,
+		.info_ptr          = SDP_VF_OQ_INFOPTR_MODE,
+		.refill_threshold  = SDP_VF_OQ_REFIL_THRESHOLD,
+	},
+
+	.num_iqdef_descs           = SDP_VF_MAX_IQ_DESCRIPTORS,
+	.num_oqdef_descs           = SDP_VF_MAX_OQ_DESCRIPTORS,
+	.oqdef_buf_size            = SDP_VF_OQ_BUF_SIZE,
+
+};
+
+const struct sdp_config*
+sdp_get_defconf(struct sdp_device *sdp_dev __rte_unused)
+{
+	const struct sdp_config *default_conf = NULL;
+
+	default_conf = &default_sdp_conf;
+
+	return default_conf;
+}
+
+static int
+sdp_chip_specific_setup(struct sdp_device *sdpvf)
+{
+	struct rte_pci_device *pdev = sdpvf->pci_dev;
+	uint32_t dev_id = pdev->id.device_id;
+	int ret;
+
+	switch (dev_id) {
+	case PCI_DEVID_OCTEONTX2_EP_VF:
+		sdpvf->chip_id = PCI_DEVID_OCTEONTX2_EP_VF;
+		ret = sdp_vf_setup_device(sdpvf);
+
+		break;
+	default:
+		otx2_err("Unsupported device");
+		ret = -EINVAL;
+	}
+
+	if (!ret)
+		otx2_info("SDP dev_id[%d]", dev_id);
+
+	return ret;
+}
+
+/* SDP VF device initialization */
+static int
+sdp_vfdev_init(struct sdp_device *sdpvf)
+{
+	uint32_t rawdev_queues, q;
+
+	if (sdp_chip_specific_setup(sdpvf)) {
+		otx2_err("Chip specific setup failed");
+		goto setup_fail;
+	}
+
+	if (sdpvf->fn_list.setup_device_regs(sdpvf)) {
+		otx2_err("Failed to configure device registers");
+		goto setup_fail;
+	}
+
+	rawdev_queues = (uint32_t)(sdpvf->sriov_info.rings_per_vf);
+
+	/* Rawdev queues setup for enqueue/dequeue */
+	for (q = 0; q < rawdev_queues; q++) {
+		if (sdp_setup_iqs(sdpvf, q)) {
+			otx2_err("Failed to setup IQs");
+			goto iq_fail;
+		}
+	}
+	otx2_info("Total[%d] IQs setup", sdpvf->num_iqs);
+
+	for (q = 0; q < rawdev_queues; q++) {
+		if (sdp_setup_oqs(sdpvf, q)) {
+			otx2_err("Failed to setup OQs");
+			goto oq_fail;
+		}
+	}
+	otx2_info("Total [%d] OQs setup", sdpvf->num_oqs);
+
+	/* Enable IQ/OQ for this device */
+	sdpvf->fn_list.enable_io_queues(sdpvf);
+
+	/* Send OQ desc credits for OQs, credits are always
+	 * sent after the OQs are enabled.
+	 */
+	for (q = 0; q < rawdev_queues; q++) {
+		rte_write32(sdpvf->droq[q]->nb_desc,
+			    sdpvf->droq[q]->pkts_credit_reg);
+
+		rte_wmb();
+		otx2_info("OQ[%d] dbells [%d]", q,
+		rte_read32(sdpvf->droq[q]->pkts_credit_reg));
+	}
+
+	rte_wmb();
+
+	otx2_info("SDP Device is Ready");
+
+	return 0;
+
+oq_fail:
+iq_fail:
+setup_fail:
+	return -ENOMEM;
+}
+
+static int
+sdp_rawdev_configure(const struct rte_rawdev *dev, rte_rawdev_obj_t config)
+{
+	struct sdp_rawdev_info *app_info = (struct sdp_rawdev_info *)config;
+	struct sdp_device *sdpvf;
+
+	if (app_info == NULL) {
+		otx2_err("Application config info [NULL]");
+		return -EINVAL;
+	}
+
+	sdpvf = (struct sdp_device *)dev->dev_private;
+
+	sdpvf->conf = app_info->app_conf;
+	sdpvf->enqdeq_mpool = app_info->enqdeq_mpool;
+
+	sdp_vfdev_init(sdpvf);
+
+	return 0;
+
+}
+
+/* SDP VF endpoint rawdev ops */
+static const struct rte_rawdev_ops sdp_rawdev_ops = {
+	.dev_configure  = sdp_rawdev_configure,
+};
+
 static int
 otx2_sdp_rawdev_probe(struct rte_pci_driver *pci_drv __rte_unused,
 		      struct rte_pci_device *pci_dev)
@@ -66,6 +213,7 @@
 		return -ENOMEM;
 	}
 
+	sdp_rawdev->dev_ops = &sdp_rawdev_ops;
 	sdp_rawdev->device = &pci_dev->device;
 	sdp_rawdev->driver_name = pci_dev->driver->driver.name;
 
diff --git a/drivers/raw/octeontx2_ep/otx2_ep_rawdev.h b/drivers/raw/octeontx2_ep/otx2_ep_rawdev.h
index 7ae7a08..bb36b6a 100644
--- a/drivers/raw/octeontx2_ep/otx2_ep_rawdev.h
+++ b/drivers/raw/octeontx2_ep/otx2_ep_rawdev.h
@@ -5,17 +5,449 @@
 #ifndef _OTX2_EP_RAWDEV_H_
 #define _OTX2_EP_RAWDEV_H_
 
-#define PCI_DEVID_OCTEONTX2_EP_VF    0xB203  /* OCTEON TX2 EP mode */
+#include <rte_byteorder.h>
+#include <rte_spinlock.h>
+
+
+/* Input Request Header format */
+struct sdp_instr_irh {
+	/* Request ID  */
+	uint64_t rid:16;
+
+	/* PCIe port to use for response */
+	uint64_t pcie_port:3;
+
+	/* Scatter indicator  1=scatter */
+	uint64_t scatter:1;
+
+	/* Size of Expected result OR no. of entries in scatter list */
+	uint64_t rlenssz:14;
+
+	/* Desired destination port for result */
+	uint64_t dport:6;
+
+	/* Opcode Specific parameters */
+	uint64_t param:8;
+
+	/* Opcode for the return packet  */
+	uint64_t opcode:16;
+};
+
+/* SDP 32B instruction format */
+struct sdp_instr_32B {
+	/* Pointer where the input data is available. */
+	uint64_t dptr;
+
+	/* SDP Instruction Header.  */
+	uint64_t ih;
+
+	/** Pointer where the response for a RAW mode packet
+	 *  will be written by OCTEON TX2.
+	 */
+	uint64_t rptr;
+
+	/* Input Request Header. Additional info about the input. */
+	uint64_t irh;
+};
+#define SDP_32B_INSTR_SIZE	(sizeof(sdp_instr_32B))
+
+/* SDP 64B instruction format */
+struct sdp_instr_64B {
+	/* Pointer where the input data is available. */
+	uint64_t dptr;
+
+	/* SDP Instruction Header. */
+	uint64_t ih;
+
+	/** Pointer where the response for a RAW mode packet
+	 * will be written by OCTEON TX2.
+	 */
+	uint64_t rptr;
+
+	/* Input Request Header. */
+	uint64_t irh;
+
+	/* Additional headers available in a 64-byte instruction. */
+	uint64_t exhdr[4];
+};
+#define SDP_64B_INSTR_SIZE	(sizeof(sdp_instr_64B))
+
+struct sdp_soft_instr {
+	/** Input data pointer. It is either pointing directly to input data
+	 *  or to a gather list.
+	 */
+	void *dptr;
+
+	/** Response from OCTEON TX2 comes at this address. It is either
+	 *  directlty pointing to output data buffer or to a scatter list.
+	 */
+	void *rptr;
+
+	/* The instruction header. All input commands have this field. */
+	struct sdp_instr_ih ih;
+
+	/* Input request header. */
+	struct sdp_instr_irh irh;
+
+	/** The PCI instruction to be sent to OCTEON TX2. This is stored in the
+	 *  instr to retrieve the physical address of buffers when instr is
+	 *  freed.
+	 */
+	struct sdp_instr_64B command;
+
+	/** If a gather list was allocated, this ptr points to the buffer used
+	 *  for the gather list. The gather list has to be 8B aligned, so this
+	 *  value may be different from dptr.
+	 */
+	void *gather_ptr;
+
+	/* Total data bytes transferred in the gather mode request. */
+	uint64_t gather_bytes;
+
+	/** If a scatter list was allocated, this ptr points to the buffer used
+	 *  for the scatter list. The scatter list has to be 8B aligned, so
+	 *  this value may be different from rptr.
+	 */
+	void *scatter_ptr;
+
+	/* Total data bytes to be received in the scatter mode request. */
+	uint64_t scatter_bytes;
+
+	/* IQ number to which this instruction has to be submitted. */
+	uint32_t q_no;
+
+	/* IQ instruction request type. */
+	uint32_t reqtype;
+};
+#define SDP_SOFT_INSTR_SIZE	(sizeof(sdp_soft_instr))
+
+/* SDP IQ request list */
+struct sdp_instr_list {
+	void *buf;
+	uint32_t reqtype;
+};
+#define SDP_IQREQ_LIST_SIZE	(sizeof(struct sdp_instr_list))
+
+/* Structure to define the configuration attributes for each Input queue. */
+struct sdp_iq_config {
+	/* Max number of IQs available */
+	uint16_t max_iqs;
+
+	/* Command size - 32 or 64 bytes */
+	uint16_t instr_type;
+
+	/* Pending list size, usually set to the sum of the size of all IQs */
+	uint32_t pending_list_size;
+};
+
+/** The instruction (input) queue.
+ *  The input queue is used to post raw (instruction) mode data or packet data
+ *  to OCTEON TX2 device from the host. Each IQ of a SDP EP VF device has one
+ *  such structure to represent it.
+ */
+struct sdp_instr_queue {
+	/* A spinlock to protect access to the input ring.  */
+	rte_spinlock_t lock;
+	rte_spinlock_t post_lock;
+
+	struct sdp_device *sdp_dev;
+	rte_atomic64_t iq_flush_running;
+
+	uint32_t q_no;
+	uint32_t pkt_in_done;
+
+	/* Flag for 64 byte commands. */
+	uint32_t iqcmd_64B:1;
+	uint32_t rsvd:17;
+	uint32_t status:8;
+
+	/* Number of  descriptors in this ring. */
+	uint32_t nb_desc;
+
+	/* Input ring index, where the driver should write the next packet */
+	uint32_t host_write_index;
+
+	/* Input ring index, where the OCTEON TX2 should read the next packet */
+	uint32_t otx_read_index;
+
+	/** This index aids in finding the window in the queue where OCTEON TX2
+	 *  has read the commands.
+	 */
+	uint32_t flush_index;
+
+	/* This keeps track of the instructions pending in this queue. */
+	rte_atomic64_t instr_pending;
+
+	uint32_t reset_instr_cnt;
+
+	/* Pointer to the Virtual Base addr of the input ring. */
+	uint8_t *base_addr;
+
+	/* This IQ request list */
+	struct sdp_instr_list *req_list;
+
+	/* SDP doorbell register for the ring. */
+	void *doorbell_reg;
+
+	/* SDP instruction count register for this ring. */
+	void *inst_cnt_reg;
+
+	/* Number of instructions pending to be posted to OCTEON TX2. */
+	uint32_t fill_cnt;
+
+	/* DMA mapped base address of the input descriptor ring. */
+	uint64_t base_addr_dma;
+
+	/* Memory zone */
+	const struct rte_memzone *iq_mz;
+};
+
+/* DROQ packet format for application i/f. */
+struct sdp_droq_pkt {
+	/* DROQ packet data buffer pointer. */
+	uint8_t	 *data;
+
+	/* DROQ packet data length */
+	uint32_t len;
+
+	uint32_t misc;
+};
+
+/** Descriptor format.
+ *  The descriptor ring is made of descriptors which have 2 64-bit values:
+ *  -# Physical (bus) address of the data buffer.
+ *  -# Physical (bus) address of a sdp_droq_info structure.
+ *  The device DMA's incoming packets and its information at the address
+ *  given by these descriptor fields.
+ */
+struct sdp_droq_desc {
+	/* The buffer pointer */
+	uint64_t buffer_ptr;
+
+	/* The Info pointer */
+	uint64_t info_ptr;
+};
+#define SDP_DROQ_DESC_SIZE	(sizeof(struct sdp_droq_desc))
+
+/* Receive Header */
+union sdp_rh {
+	uint64_t rh64;
+};
+#define SDP_RH_SIZE (sizeof(union sdp_rh))
+
+/** Information about packet DMA'ed by OCTEON TX2.
+ *  The format of the information available at Info Pointer after OCTEON TX2
+ *  has posted a packet. Not all descriptors have valid information. Only
+ *  the Info field of the first descriptor for a packet has information
+ *  about the packet.
+ */
+struct sdp_droq_info {
+	/* The Output Receive Header. */
+	union sdp_rh rh;
+
+	/* The Length of the packet. */
+	uint64_t length;
+};
+#define SDP_DROQ_INFO_SIZE	(sizeof(struct sdp_droq_info))
+
+/** Pointer to data buffer.
+ *  Driver keeps a pointer to the data buffer that it made available to
+ *  the OCTEON TX2 device. Since the descriptor ring keeps physical (bus)
+ *  addresses, this field is required for the driver to keep track of
+ *  the virtual address pointers.
+ */
+struct sdp_recv_buffer {
+	/* Packet buffer, including meta data. */
+	void *buffer;
+
+	/* Data in the packet buffer. */
+	/* uint8_t *data; */
+};
+#define SDP_DROQ_RECVBUF_SIZE	(sizeof(struct sdp_recv_buffer))
+
+/* Structure to define the configuration attributes for each Output queue. */
+struct sdp_oq_config {
+	/* Max number of OQs available */
+	uint16_t max_oqs;
+
+	/* If set, the Output queue uses info-pointer mode. (Default: 1 ) */
+	uint16_t info_ptr;
+
+	/** The number of buffers that were consumed during packet processing by
+	 *  the driver on this Output queue before the driver attempts to
+	 *  replenish the descriptor ring with new buffers.
+	 */
+	uint32_t refill_threshold;
+};
+
+/* The Descriptor Ring Output Queue(DROQ) structure. */
+struct sdp_droq {
+	/* A spinlock to protect access to this ring. */
+	rte_spinlock_t lock;
+
+	struct sdp_device *sdp_dev;
+	/* The 8B aligned descriptor ring starts at this address. */
+	struct sdp_droq_desc *desc_ring;
+
+	uint32_t q_no;
+	uint32_t last_pkt_count;
+
+	/* Driver should read the next packet at this index */
+	uint32_t read_idx;
+
+	/* OCTEON TX2 will write the next packet at this index */
+	uint32_t write_idx;
+
+	/* At this index, the driver will refill the descriptor's buffer */
+	uint32_t refill_idx;
+
+	/* Packets pending to be processed */
+	rte_atomic64_t pkts_pending;
+
+	/* Number of descriptors in this ring. */
+	uint32_t nb_desc;
+
+	/* The number of descriptors pending to refill. */
+	uint32_t refill_count;
+
+	uint32_t refill_threshold;
+
+	/* The 8B aligned info ptrs begin from this address. */
+	struct sdp_droq_info *info_list;
+
+	/* receive buffer list contains virtual addresses of the buffers. */
+	struct sdp_recv_buffer *recv_buf_list;
+
+	/* The size of each buffer pointed by the buffer pointer. */
+	uint32_t buffer_size;
+
+	/** Pointer to the mapped packet credit register.
+	 *  Host writes number of info/buffer ptrs available to this register
+	 */
+	void *pkts_credit_reg;
+
+	/** Pointer to the mapped packet sent register. OCTEON TX2 writes the
+	 *  number of packets DMA'ed to host memory in this register.
+	 */
+	void *pkts_sent_reg;
+
+	/* DMA mapped address of the DROQ descriptor ring. */
+	size_t desc_ring_dma;
+
+	/* Info_ptr list is allocated at this virtual address. */
+	size_t info_base_addr;
+
+	/* DMA mapped address of the info list */
+	size_t info_list_dma;
+
+	/* Allocated size of info list. */
+	uint32_t info_alloc_size;
+
+	/* Memory zone **/
+	const struct rte_memzone *desc_ring_mz;
+	const struct rte_memzone *info_mz;
+};
+#define SDP_DROQ_SIZE		(sizeof(struct sdp_droq))
+
+/* IQ/OQ mask */
+struct sdp_io_enable {
+	uint64_t iq;
+	uint64_t oq;
+	uint64_t iq64B;
+};
+
+/* Structure to define the configuration. */
+struct sdp_config {
+	/* Input Queue attributes. */
+	struct sdp_iq_config iq;
+
+	/* Output Queue attributes. */
+	struct sdp_oq_config oq;
+
+	/* Num of desc for IQ rings */
+	uint32_t num_iqdef_descs;
+
+	/* Num of desc for OQ rings */
+	uint32_t num_oqdef_descs;
+
+	/* OQ buffer size */
+	uint32_t oqdef_buf_size;
+};
+
+/* Required functions for each VF device */
+struct sdp_fn_list {
+	void (*setup_iq_regs)(struct sdp_device *sdpvf, uint32_t q_no);
+	void (*setup_oq_regs)(struct sdp_device *sdpvf, uint32_t q_no);
+	int (*setup_device_regs)(struct sdp_device *sdpvf);
+	void (*enable_io_queues)(struct sdp_device *sdpvf);
+	void (*enable_iq)(struct sdp_device *sdpvf, uint32_t q_no);
+	void (*enable_oq)(struct sdp_device *sdpvf, uint32_t q_no);
+};
+
+/* SRIOV information */
+struct sdp_sriov_info {
+	/* Number of rings assigned to VF */
+	uint32_t rings_per_vf;
+
+	/* Number of VF devices enabled */
+	uint32_t num_vfs;
+};
+
+
+/* Information to be passed from application */
+struct sdp_rawdev_info {
+	struct rte_mempool *enqdeq_mpool;
+	const struct sdp_config *app_conf;
+};
 
 /* SDP EP VF device */
 struct sdp_device {
 	/* PCI device pointer */
 	struct rte_pci_device *pci_dev;
+	uint16_t chip_id;
+	uint16_t pf_num;
 	uint16_t vf_num;
 
+	/* This device's PCIe port used for traffic. */
+	uint16_t pcie_port;
+	uint32_t pkind;
+
+	/* The state of this device */
+	rte_atomic64_t status;
+
 	/* Memory mapped h/w address */
 	uint8_t *hw_addr;
 
+	struct sdp_fn_list fn_list;
+
+	/* Num IQs */
+	uint32_t num_iqs;
+
+	/* The input instruction queues */
+	struct sdp_instr_queue *instr_queue[SDP_VF_MAX_IOQS_PER_RAWDEV];
+
+	/* Num OQs */
+	uint32_t num_oqs;
+
+	/* The DROQ output queues  */
+	struct sdp_droq *droq[SDP_VF_MAX_IOQS_PER_RAWDEV];
+
+	/* IOQ data buffer pool */
+	struct rte_mempool *enqdeq_mpool;
+
+	/* IOQ mask */
+	struct sdp_io_enable io_qmask;
+
+	/* SR-IOV info */
+	struct sdp_sriov_info sriov_info;
+
+	/* Device configuration */
+	const struct sdp_config *conf;
 };
 
+const struct sdp_config *sdp_get_defconf(struct sdp_device *sdp_dev);
+int sdp_setup_iqs(struct sdp_device *sdpvf, uint32_t iq_no);
+
+int sdp_setup_oqs(struct sdp_device *sdpvf, uint32_t oq_no);
+
 #endif /* _OTX2_EP_RAWDEV_H_ */
diff --git a/drivers/raw/octeontx2_ep/otx2_ep_vf.c b/drivers/raw/octeontx2_ep/otx2_ep_vf.c
new file mode 100644
index 0000000..b6120eb
--- /dev/null
+++ b/drivers/raw/octeontx2_ep/otx2_ep_vf.c
@@ -0,0 +1,408 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(C) 2019 Marvell International Ltd.
+ */
+
+#include <rte_common.h>
+#include <rte_rawdev.h>
+#include <rte_rawdev_pmd.h>
+
+#include "otx2_common.h"
+#include "otx2_ep_rawdev.h"
+#include "otx2_ep_vf.h"
+
+static int
+sdp_vf_reset_iq(struct sdp_device *sdpvf, int q_no)
+{
+	uint64_t loop = SDP_VF_BUSY_LOOP_COUNT;
+	volatile uint64_t d64 = 0ull;
+
+	/* There is no RST for a ring.
+	 * Clear all registers one by one after disabling the ring
+	 */
+
+	otx2_write64(d64, sdpvf->hw_addr + SDP_VF_R_IN_ENABLE(q_no));
+	otx2_write64(d64, sdpvf->hw_addr + SDP_VF_R_IN_INSTR_BADDR(q_no));
+	otx2_write64(d64, sdpvf->hw_addr + SDP_VF_R_IN_INSTR_RSIZE(q_no));
+
+	d64 = 0xFFFFFFFF; /* ~0ull */
+	otx2_write64(d64, sdpvf->hw_addr + SDP_VF_R_IN_INSTR_DBELL(q_no));
+	d64 = otx2_read64(sdpvf->hw_addr + SDP_VF_R_IN_INSTR_DBELL(q_no));
+
+	while ((d64 != 0) && loop--) {
+		otx2_write64(d64, sdpvf->hw_addr +
+			     SDP_VF_R_IN_INSTR_DBELL(q_no));
+
+		rte_delay_ms(1);
+
+		d64 = otx2_read64(sdpvf->hw_addr +
+				  SDP_VF_R_IN_INSTR_DBELL(q_no));
+	}
+
+	loop = SDP_VF_BUSY_LOOP_COUNT;
+	d64 = otx2_read64(sdpvf->hw_addr + SDP_VF_R_IN_CNTS(q_no));
+	while ((d64 != 0) && loop--) {
+		otx2_write64(d64, sdpvf->hw_addr + SDP_VF_R_IN_CNTS(q_no));
+
+		rte_delay_ms(1);
+
+		d64 = otx2_read64(sdpvf->hw_addr + SDP_VF_R_IN_CNTS(q_no));
+	}
+
+	d64 = 0ull;
+	otx2_write64(d64, sdpvf->hw_addr + SDP_VF_R_IN_INT_LEVELS(q_no));
+	otx2_write64(d64, sdpvf->hw_addr + SDP_VF_R_IN_PKT_CNT(q_no));
+	otx2_write64(d64, sdpvf->hw_addr + SDP_VF_R_IN_BYTE_CNT(q_no));
+
+	return 0;
+}
+
+static int
+sdp_vf_reset_oq(struct sdp_device *sdpvf, int q_no)
+{
+	uint64_t loop = SDP_VF_BUSY_LOOP_COUNT;
+	volatile uint64_t d64 = 0ull;
+
+	otx2_write64(d64, sdpvf->hw_addr + SDP_VF_R_OUT_ENABLE(q_no));
+
+	otx2_write64(d64, sdpvf->hw_addr + SDP_VF_R_OUT_SLIST_BADDR(q_no));
+
+	otx2_write64(d64, sdpvf->hw_addr + SDP_VF_R_OUT_SLIST_RSIZE(q_no));
+
+	d64 = 0xFFFFFFFF;
+	otx2_write64(d64, sdpvf->hw_addr + SDP_VF_R_OUT_SLIST_DBELL(q_no));
+	d64 = otx2_read64(sdpvf->hw_addr + SDP_VF_R_OUT_SLIST_DBELL(q_no));
+
+	while ((d64 != 0) && loop--) {
+		otx2_write64(d64, sdpvf->hw_addr +
+			     SDP_VF_R_OUT_SLIST_DBELL(q_no));
+
+		rte_delay_ms(1);
+
+		d64 = otx2_read64(sdpvf->hw_addr +
+				  SDP_VF_R_OUT_SLIST_DBELL(q_no));
+	}
+
+	loop = SDP_VF_BUSY_LOOP_COUNT;
+	d64 = otx2_read64(sdpvf->hw_addr + SDP_VF_R_OUT_CNTS(q_no));
+	while ((d64 != 0) && (loop--)) {
+		otx2_write64(d64, sdpvf->hw_addr + SDP_VF_R_OUT_CNTS(q_no));
+
+		rte_delay_ms(1);
+
+		d64 = otx2_read64(sdpvf->hw_addr + SDP_VF_R_OUT_CNTS(q_no));
+	}
+
+	d64 = 0ull;
+	otx2_write64(d64, sdpvf->hw_addr + SDP_VF_R_OUT_INT_LEVELS(q_no));
+	otx2_write64(d64, sdpvf->hw_addr + SDP_VF_R_OUT_PKT_CNT(q_no));
+	otx2_write64(d64, sdpvf->hw_addr + SDP_VF_R_OUT_BYTE_CNT(q_no));
+
+	return 0;
+}
+
+static void
+sdp_vf_setup_global_iq_reg(struct sdp_device *sdpvf, int q_no)
+{
+	volatile uint64_t reg_val = 0ull;
+
+	/* Select ES, RO, NS, RDSIZE,DPTR Fomat#0 for IQs
+	 * IS_64B is by default enabled.
+	 */
+	reg_val = otx2_read64(sdpvf->hw_addr + SDP_VF_R_IN_CONTROL(q_no));
+
+	reg_val |= SDP_VF_R_IN_CTL_RDSIZE;
+	reg_val |= SDP_VF_R_IN_CTL_IS_64B;
+	reg_val |= SDP_VF_R_IN_CTL_ESR;
+
+	otx2_write64(reg_val, sdpvf->hw_addr + SDP_VF_R_IN_CONTROL(q_no));
+
+}
+
+static void
+sdp_vf_setup_global_oq_reg(struct sdp_device *sdpvf, int q_no)
+{
+	volatile uint64_t reg_val = 0ull;
+
+	reg_val = otx2_read64(sdpvf->hw_addr + SDP_VF_R_OUT_CONTROL(q_no));
+
+	reg_val |= (SDP_VF_R_OUT_CTL_IMODE);
+
+	reg_val &= ~(SDP_VF_R_OUT_CTL_ROR_P);
+	reg_val &= ~(SDP_VF_R_OUT_CTL_NSR_P);
+	reg_val &= ~(SDP_VF_R_OUT_CTL_ROR_I);
+	reg_val &= ~(SDP_VF_R_OUT_CTL_NSR_I);
+	reg_val &= ~(SDP_VF_R_OUT_CTL_ES_I);
+	reg_val &= ~(SDP_VF_R_OUT_CTL_ROR_D);
+	reg_val &= ~(SDP_VF_R_OUT_CTL_NSR_D);
+	reg_val &= ~(SDP_VF_R_OUT_CTL_ES_D);
+
+	/* INFO/DATA ptr swap is required  */
+	reg_val |= (SDP_VF_R_OUT_CTL_ES_P);
+
+	otx2_write64(reg_val, sdpvf->hw_addr + SDP_VF_R_OUT_CONTROL(q_no));
+
+}
+
+static int
+sdp_vf_reset_input_queues(struct sdp_device *sdpvf)
+{
+	uint32_t q_no = 0;
+
+	otx2_sdp_dbg("%s :", __func__);
+
+	for (q_no = 0; q_no < sdpvf->sriov_info.rings_per_vf; q_no++)
+		sdp_vf_reset_iq(sdpvf, q_no);
+
+	return 0;
+}
+
+static int
+sdp_vf_reset_output_queues(struct sdp_device *sdpvf)
+{
+	uint64_t q_no = 0ull;
+
+	otx2_sdp_dbg(" %s :", __func__);
+
+	for (q_no = 0; q_no < sdpvf->sriov_info.rings_per_vf; q_no++)
+		sdp_vf_reset_oq(sdpvf, q_no);
+
+	return 0;
+}
+
+static void
+sdp_vf_setup_global_input_regs(struct sdp_device *sdpvf)
+{
+	uint64_t q_no = 0ull;
+
+	sdp_vf_reset_input_queues(sdpvf);
+
+	for (q_no = 0; q_no < (sdpvf->sriov_info.rings_per_vf); q_no++)
+		sdp_vf_setup_global_iq_reg(sdpvf, q_no);
+}
+
+static void
+sdp_vf_setup_global_output_regs(struct sdp_device *sdpvf)
+{
+	uint32_t q_no;
+
+	sdp_vf_reset_output_queues(sdpvf);
+
+	for (q_no = 0; q_no < (sdpvf->sriov_info.rings_per_vf); q_no++)
+		sdp_vf_setup_global_oq_reg(sdpvf, q_no);
+
+}
+
+static int
+sdp_vf_setup_device_regs(struct sdp_device *sdpvf)
+{
+	sdp_vf_setup_global_input_regs(sdpvf);
+	sdp_vf_setup_global_output_regs(sdpvf);
+
+	return 0;
+}
+
+static void
+sdp_vf_setup_iq_regs(struct sdp_device *sdpvf, uint32_t iq_no)
+{
+	struct sdp_instr_queue *iq = sdpvf->instr_queue[iq_no];
+	volatile uint64_t reg_val = 0ull;
+
+	reg_val = otx2_read64(sdpvf->hw_addr + SDP_VF_R_IN_CONTROL(iq_no));
+
+	/* Wait till IDLE to set to 1, not supposed to configure BADDR
+	 * as long as IDLE is 0
+	 */
+	if (!(reg_val & SDP_VF_R_IN_CTL_IDLE)) {
+		do {
+			reg_val = otx2_read64(sdpvf->hw_addr +
+					      SDP_VF_R_IN_CONTROL(iq_no));
+		} while (!(reg_val & SDP_VF_R_IN_CTL_IDLE));
+	}
+
+	/* Write the start of the input queue's ring and its size  */
+	otx2_write64(iq->base_addr_dma, sdpvf->hw_addr +
+		     SDP_VF_R_IN_INSTR_BADDR(iq_no));
+	otx2_write64(iq->nb_desc, sdpvf->hw_addr +
+		     SDP_VF_R_IN_INSTR_RSIZE(iq_no));
+
+	/* Remember the doorbell & instruction count register addr
+	 * for this queue
+	 */
+	iq->doorbell_reg = (uint8_t *) sdpvf->hw_addr +
+			   SDP_VF_R_IN_INSTR_DBELL(iq_no);
+	iq->inst_cnt_reg = (uint8_t *) sdpvf->hw_addr +
+			   SDP_VF_R_IN_CNTS(iq_no);
+
+	otx2_sdp_dbg("InstQ[%d]:dbell reg @ 0x%p instcnt_reg @ 0x%p",
+		     iq_no, iq->doorbell_reg, iq->inst_cnt_reg);
+
+	/* Store the current instrn counter(used in flush_iq calculation) */
+	iq->reset_instr_cnt = rte_read32(iq->inst_cnt_reg);
+
+	/* IN INTR_THRESHOLD is set to max(FFFFFFFF) which disable the IN INTR
+	 * to raise
+	 */
+	reg_val = otx2_read64(sdpvf->hw_addr + SDP_VF_R_IN_INT_LEVELS(iq_no));
+	reg_val = 0xffffffff;
+
+	otx2_write64(reg_val, sdpvf->hw_addr + SDP_VF_R_IN_INT_LEVELS(iq_no));
+
+}
+
+static void
+sdp_vf_setup_oq_regs(struct sdp_device *sdpvf, uint32_t oq_no)
+{
+	volatile uint64_t reg_val = 0ull;
+	uint64_t oq_ctl = 0ull;
+
+	struct sdp_droq *droq = sdpvf->droq[oq_no];
+
+	/* Wait on IDLE to set to 1, supposed to configure BADDR
+	 * as log as IDLE is 0
+	 */
+	reg_val = otx2_read64(sdpvf->hw_addr + SDP_VF_R_OUT_CONTROL(oq_no));
+
+	while (!(reg_val & SDP_VF_R_OUT_CTL_IDLE)) {
+		reg_val = otx2_read64(sdpvf->hw_addr +
+				      SDP_VF_R_OUT_CONTROL(oq_no));
+	}
+
+	otx2_write64(droq->desc_ring_dma, sdpvf->hw_addr +
+		     SDP_VF_R_OUT_SLIST_BADDR(oq_no));
+	otx2_write64(droq->nb_desc, sdpvf->hw_addr +
+		     SDP_VF_R_OUT_SLIST_RSIZE(oq_no));
+
+	oq_ctl = otx2_read64(sdpvf->hw_addr + SDP_VF_R_OUT_CONTROL(oq_no));
+
+	/* Clear the ISIZE and BSIZE (22-0) */
+	oq_ctl &= ~(0x7fffffull);
+
+	/* Populate the BSIZE (15-0) */
+	oq_ctl |= (droq->buffer_size & 0xffff);
+
+	/* Populate ISIZE(22-16) */
+	oq_ctl |= ((SDP_RH_SIZE << 16) & 0x7fffff);
+	otx2_write64(oq_ctl, sdpvf->hw_addr + SDP_VF_R_OUT_CONTROL(oq_no));
+
+	/* Mapped address of the pkt_sent and pkts_credit regs */
+	droq->pkts_sent_reg = (uint8_t *) sdpvf->hw_addr +
+			      SDP_VF_R_OUT_CNTS(oq_no);
+	droq->pkts_credit_reg = (uint8_t *) sdpvf->hw_addr +
+				SDP_VF_R_OUT_SLIST_DBELL(oq_no);
+
+	reg_val = otx2_read64(sdpvf->hw_addr + SDP_VF_R_OUT_INT_LEVELS(oq_no));
+
+	/* Clear PKT_CNT register */
+	rte_write64(0xFFFFFFFFF, (uint8_t *)sdpvf->hw_addr +
+		    SDP_VF_R_OUT_PKT_CNT(oq_no));
+
+	/* Clear the OQ doorbell  */
+	rte_write32(0xFFFFFFFF, droq->pkts_credit_reg);
+	while ((rte_read32(droq->pkts_credit_reg) != 0ull)) {
+		rte_write32(0xFFFFFFFF, droq->pkts_credit_reg);
+		rte_delay_ms(1);
+	}
+	otx2_sdp_dbg("SDP_R[%d]_credit:%x", oq_no,
+		     rte_read32(droq->pkts_credit_reg));
+
+	/* Clear the OQ_OUT_CNTS doorbell  */
+	reg_val = rte_read32(droq->pkts_sent_reg);
+	rte_write32((uint32_t)reg_val, droq->pkts_sent_reg);
+
+	otx2_sdp_dbg("SDP_R[%d]_sent: %x", oq_no,
+		     rte_read32(droq->pkts_sent_reg));
+
+	while (((rte_read32(droq->pkts_sent_reg)) != 0ull)) {
+		reg_val = rte_read32(droq->pkts_sent_reg);
+		rte_write32((uint32_t)reg_val, droq->pkts_sent_reg);
+		rte_delay_ms(1);
+	}
+
+}
+
+static void
+sdp_vf_enable_iq(struct sdp_device *sdpvf, uint32_t q_no)
+{
+	volatile uint64_t reg_val = 0ull;
+	uint64_t loop = SDP_VF_BUSY_LOOP_COUNT;
+
+	/* Resetting doorbells during IQ enabling also to handle abrupt
+	 * guest reboot. IQ reset does not clear the doorbells.
+	 */
+	otx2_write64(0xFFFFFFFF, sdpvf->hw_addr +
+		     SDP_VF_R_IN_INSTR_DBELL(q_no));
+
+	while (((otx2_read64(sdpvf->hw_addr +
+		 SDP_VF_R_IN_INSTR_DBELL(q_no))) != 0ull) && loop--) {
+
+		rte_delay_ms(1);
+	}
+
+	reg_val = otx2_read64(sdpvf->hw_addr + SDP_VF_R_IN_ENABLE(q_no));
+	reg_val |= 0x1ull;
+
+	otx2_write64(reg_val, sdpvf->hw_addr + SDP_VF_R_IN_ENABLE(q_no));
+
+	otx2_info("IQ[%d] enable done", q_no);
+
+}
+
+static void
+sdp_vf_enable_oq(struct sdp_device *sdpvf, uint32_t q_no)
+{
+	volatile uint64_t reg_val = 0ull;
+
+	reg_val = otx2_read64(sdpvf->hw_addr + SDP_VF_R_OUT_ENABLE(q_no));
+	reg_val |= 0x1ull;
+	otx2_write64(reg_val, sdpvf->hw_addr + SDP_VF_R_OUT_ENABLE(q_no));
+
+	otx2_info("OQ[%d] enable done", q_no);
+}
+
+static void
+sdp_vf_enable_io_queues(struct sdp_device *sdpvf)
+{
+	uint32_t q_no = 0;
+
+	for (q_no = 0; q_no < sdpvf->num_iqs; q_no++)
+		sdp_vf_enable_iq(sdpvf, q_no);
+
+	for (q_no = 0; q_no < sdpvf->num_oqs; q_no++)
+		sdp_vf_enable_oq(sdpvf, q_no);
+}
+
+int
+sdp_vf_setup_device(struct sdp_device *sdpvf)
+{
+	uint64_t reg_val = 0ull;
+
+	/* If application doesn't provide its conf, use driver default conf */
+	if (sdpvf->conf == NULL) {
+		sdpvf->conf = sdp_get_defconf(sdpvf);
+		if (sdpvf->conf == NULL) {
+			otx2_err("SDP VF default config not found");
+			return -ENOMEM;
+		}
+		otx2_info("Default config is used");
+	}
+
+	/* Get IOQs (RPVF] count */
+	reg_val = otx2_read64(sdpvf->hw_addr + SDP_VF_R_IN_CONTROL(0));
+
+	sdpvf->sriov_info.rings_per_vf = ((reg_val >> SDP_VF_R_IN_CTL_RPVF_POS)
+					  & SDP_VF_R_IN_CTL_RPVF_MASK);
+
+	otx2_info("SDP RPVF: %d", sdpvf->sriov_info.rings_per_vf);
+
+	sdpvf->fn_list.setup_iq_regs       = sdp_vf_setup_iq_regs;
+	sdpvf->fn_list.setup_oq_regs       = sdp_vf_setup_oq_regs;
+	sdpvf->fn_list.setup_device_regs   = sdp_vf_setup_device_regs;
+	sdpvf->fn_list.enable_io_queues    = sdp_vf_enable_io_queues;
+	sdpvf->fn_list.enable_iq           = sdp_vf_enable_iq;
+	sdpvf->fn_list.enable_oq           = sdp_vf_enable_oq;
+
+
+	return 0;
+
+}
+
diff --git a/drivers/raw/octeontx2_ep/otx2_ep_vf.h b/drivers/raw/octeontx2_ep/otx2_ep_vf.h
new file mode 100644
index 0000000..974f856
--- /dev/null
+++ b/drivers/raw/octeontx2_ep/otx2_ep_vf.h
@@ -0,0 +1,10 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(C) 2019 Marvell International Ltd.
+ */
+#ifndef _OTX2_EP_VF_H_
+#define _OTX2_EP_VF_H_
+int
+sdp_vf_setup_device(struct sdp_device *sdpvf);
+
+#endif /*_OTX2_EP_VF_H_ */
+
