[v2,4/4] net/mlx5: add L2 and L3 decap to Direct Verbs flow
Checks
Commit Message
This patch adds support for Direct Verbs decap operations, L2 and L3.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Conflicts:
drivers/net/mlx5/mlx5_flow_dv.c
---
drivers/net/mlx5/mlx5_flow_dv.c | 224 +++++++++++++++++++++++++++++++++++++++-
1 file changed, 219 insertions(+), 5 deletions(-)
Comments
On Sun, Oct 07, 2018 at 05:25:08PM +0300, Dekel Peled wrote:
> This patch adds support for Direct Verbs decap operations, L2 and L3.
>
> Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Same comment for the order of 'dev' arg.
> Conflicts:
> drivers/net/mlx5/mlx5_flow_dv.c
What is this? Conflicts?
> ---
> drivers/net/mlx5/mlx5_flow_dv.c | 224 +++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 219 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/net/mlx5/mlx5_flow_dv.c b/drivers/net/mlx5/mlx5_flow_dv.c
> index 221c76a..5b44f5b 100644
> --- a/drivers/net/mlx5/mlx5_flow_dv.c
> +++ b/drivers/net/mlx5/mlx5_flow_dv.c
> @@ -120,11 +120,18 @@
> RTE_FLOW_ERROR_TYPE_ACTION, NULL,
> "can't have 2 encap actions in same"
> " flow");
> + if (action_flags & (MLX5_FLOW_ACTION_TUNNEL_DECAP |
> + MLX5_FLOW_ACTION_TUNNEL_DECAP_L3))
> + return rte_flow_error_set(error, EINVAL,
> + RTE_FLOW_ERROR_TYPE_ACTION, NULL,
> + "can't encap and decap in same"
> + " flow");
> if (attr->ingress)
> return rte_flow_error_set(error, ENOTSUP,
> - RTE_FLOW_ERROR_TYPE_ATTR_INGRESS, NULL,
> - "encap action not supported for "
> - "ingress");
> + RTE_FLOW_ERROR_TYPE_ATTR_INGRESS,
> + NULL,
> + "encap action not supported for "
> + "ingress");
It seems to be mistakenly included in this patch when you rebase the previous
patch. Please fix it in [4/4] and [3/4].
> return 0;
> }
>
> @@ -166,6 +173,12 @@
> RTE_FLOW_ERROR_TYPE_ACTION, NULL,
> "can't have 2 encap actions in same"
> " flow");
> + if (action_flags & (MLX5_FLOW_ACTION_TUNNEL_DECAP |
> + MLX5_FLOW_ACTION_TUNNEL_DECAP_L3))
> + return rte_flow_error_set(error, EINVAL,
> + RTE_FLOW_ERROR_TYPE_ACTION, NULL,
> + "can't encap and decap in same"
> + " flow");
> if (attr->ingress)
> return rte_flow_error_set(error, ENOTSUP,
> RTE_FLOW_ERROR_TYPE_ATTR_INGRESS,
> @@ -176,6 +189,100 @@
> }
>
> /**
> + * Validate the tunnel decap action
> + *
> + * @param[in] action_flags
> + * holds the actions detected until now.
> + * @param[in] attr
> + * Pointer to flow attributes
> + * @param[out] error
> + * Pointer to error structure.
> + *
> + * @return
> + * 0 on success, a negative errno value otherwise and rte_ernno is set.
> + */
> +static int
> +flow_dv_validate_action_tunnel_decap(uint64_t action_flags,
> + const struct rte_flow_attr *attr,
> + struct rte_flow_error *error)
> +{
> + if (action_flags & MLX5_FLOW_ACTION_DROP)
> + return rte_flow_error_set(error, EINVAL,
> + RTE_FLOW_ERROR_TYPE_ACTION, NULL,
> + "can't drop and decap in same flow");
> + if (action_flags & (MLX5_FLOW_ACTION_TUNNEL_DECAP |
> + MLX5_FLOW_ACTION_TUNNEL_DECAP_L3))
> + return rte_flow_error_set(error, EINVAL,
> + RTE_FLOW_ERROR_TYPE_ACTION, NULL,
> + "can't have 2 decap actions in same"
> + " flow");
> + if (action_flags & (MLX5_FLOW_ACTION_TUNNEL_ENCAP |
> + MLX5_FLOW_ACTION_TUNNEL_ENCAP_L3))
> + return rte_flow_error_set(error, EINVAL,
> + RTE_FLOW_ERROR_TYPE_ACTION, NULL,
> + "can't encap and decap in same"
> + " flow");
> + if (attr->egress)
> + return rte_flow_error_set(error, ENOTSUP,
> + RTE_FLOW_ERROR_TYPE_ATTR_EGRESS, NULL,
> + "decap action not supported for "
> + "egress");
> + return 0;
> +}
> +
> +/**
> + * Validate the tunnel decap L3 action
> + *
> + * @param[in] action_flags
> + * holds the actions detected until now.
> + * @param[in] action
> + * Pointer to the decap action.
> + * @param[in] attr
> + * Pointer to flow attributes
> + * @param[out] error
> + * Pointer to error structure.
> + *
> + * @return
> + * 0 on success, a negative errno value otherwise and rte_ernno is set.
> + */
> +static int
> +flow_dv_validate_action_tunnel_decap_l3(uint64_t action_flags,
> + const struct rte_flow_action *action,
> + const struct rte_flow_attr *attr,
> + struct rte_flow_error *error)
> +{
> + const struct rte_flow_action_tunnel_decap_l3 *tunnel_decap_l3 =
> + action->conf;
> +
> + if (!tunnel_decap_l3 || !(tunnel_decap_l3->buf))
> + return rte_flow_error_set(error, EINVAL,
> + RTE_FLOW_ERROR_TYPE_ACTION, action,
> + "configuration cannot be null");
> + if (action_flags & MLX5_FLOW_ACTION_DROP)
> + return rte_flow_error_set(error, EINVAL,
> + RTE_FLOW_ERROR_TYPE_ACTION, NULL,
> + "can't drop and decap in same flow");
> + if (action_flags & (MLX5_FLOW_ACTION_TUNNEL_DECAP |
> + MLX5_FLOW_ACTION_TUNNEL_DECAP_L3))
> + return rte_flow_error_set(error, EINVAL,
> + RTE_FLOW_ERROR_TYPE_ACTION, NULL,
> + "can't have 2 decap actions in same"
> + " flow");
> + if (action_flags & (MLX5_FLOW_ACTION_TUNNEL_ENCAP |
> + MLX5_FLOW_ACTION_TUNNEL_ENCAP_L3))
> + return rte_flow_error_set(error, EINVAL,
> + RTE_FLOW_ERROR_TYPE_ACTION, NULL,
> + "can't encap and decap in same"
> + " flow");
> + if (attr->egress)
> + return rte_flow_error_set(error, ENOTSUP,
> + RTE_FLOW_ERROR_TYPE_ATTR_EGRESS, NULL,
> + "decap action not supported for "
> + "egress");
> + return 0;
> +}
> +
> +/**
> * Convert encap action to DV specification.
> *
> * @param[in] action
> @@ -245,6 +352,72 @@
> }
>
> /**
> + * Convert decap action to DV specification.
> + *
> + * @param[in] action
> + * Pointer to action structure.
> + * @param[in] dev
> + * Pointer to rte_eth_dev structure.
> + * @param[out] error
> + * Pointer to the error structure.
> + *
> + * @return
> + * Pointer to action on success, NULL otherwise and rte_errno is set.
> + */
> +static struct ibv_flow_action *
> +flow_dv_create_decap(const struct rte_flow_action *action __rte_unused,
> + struct rte_eth_dev *dev,
> + struct rte_flow_error *error)
> +{
> + struct ibv_flow_action *decap_verb = NULL;
> + struct priv *priv = dev->data->dev_private;
> +
> + decap_verb = mlx5_glue->dv_create_flow_action_packet_reformat
> + (priv->ctx, 0, NULL,
> + MLX5DV_FLOW_ACTION_PACKET_REFORMAT_TYPE_L2_TUNNEL_TO_L2,
> + MLX5DV_FLOW_TABLE_TYPE_NIC_RX);
> + if (!decap_verb)
> + rte_flow_error_set(error, EINVAL, RTE_FLOW_ERROR_TYPE_ACTION,
> + NULL, "cannot create decap action");
> + return decap_verb;
> +}
> +
> +/**
> + * Convert decap L3 action to DV specification.
> + *
> + * @param[in] action
> + * Pointer to action structure.
> + * @param[in] dev
> + * Pointer to rte_eth_dev structure.
> + * @param[out] error
> + * Pointer to the error structure.
> + *
> + * @return
> + * Pointer to action on success, NULL otherwise and rte_errno is set.
> + */
> +static struct ibv_flow_action *
> +flow_dv_create_decap_l3(const struct rte_flow_action *action,
> + struct rte_eth_dev *dev,
> + struct rte_flow_error *error)
> +{
> + struct ibv_flow_action *decap_l3_verb = NULL;
> + const struct rte_flow_action_tunnel_decap_l3 *decap_l3_data;
> + struct priv *priv = dev->data->dev_private;
> +
> + decap_l3_data =
> + (const struct rte_flow_action_tunnel_decap_l3 *)action->conf;
> + decap_l3_verb = mlx5_glue->dv_create_flow_action_packet_reformat
> + (priv->ctx, decap_l3_data->size,
> + decap_l3_data->size ? decap_l3_data->buf : NULL,
> + MLX5DV_FLOW_ACTION_PACKET_REFORMAT_TYPE_L3_TUNNEL_TO_L2,
> + MLX5DV_FLOW_TABLE_TYPE_NIC_RX);
> + if (!decap_l3_verb)
> + rte_flow_error_set(error, EINVAL, RTE_FLOW_ERROR_TYPE_ACTION,
> + NULL, "cannot create decap L3 action");
> + return decap_l3_verb;
> +}
> +
> +/**
> * Verify the @p attributes will be correctly understood by the NIC and store
> * them in the @p flow if everything is correct.
> *
> @@ -505,6 +678,20 @@
> return ret;
> action_flags |= MLX5_FLOW_ACTION_TUNNEL_ENCAP_L3;
> break;
> + case RTE_FLOW_ACTION_TYPE_TUNNEL_DECAP:
> + ret = flow_dv_validate_action_tunnel_decap
> + (action_flags, attr, error);
> + if (ret < 0)
> + return ret;
> + action_flags |= MLX5_FLOW_ACTION_TUNNEL_DECAP;
> + break;
> + case RTE_FLOW_ACTION_TYPE_TUNNEL_DECAP_L3:
> + ret = flow_dv_validate_action_tunnel_decap_l3
> + (action_flags, actions, attr, error);
> + if (ret < 0)
> + return ret;
> + action_flags |= MLX5_FLOW_ACTION_TUNNEL_DECAP_L3;
> + break;
> default:
> return rte_flow_error_set(error, ENOTSUP,
> RTE_FLOW_ERROR_TYPE_ACTION,
> @@ -1300,6 +1487,30 @@
> flow->actions |= MLX5_FLOW_ACTION_TUNNEL_ENCAP_L3;
> actions_n++;
> break;
> + case RTE_FLOW_ACTION_TYPE_TUNNEL_DECAP:
> + dev_flow->dv.actions[actions_n].type =
> + MLX5DV_FLOW_ACTION_IBV_FLOW_ACTION;
> + dev_flow->dv.actions[actions_n].action =
> + flow_dv_create_decap(action, dev, error);
> + if (!(dev_flow->dv.actions[actions_n].action))
> + return -rte_errno;
> + dev_flow->dv.decap_verb =
> + dev_flow->dv.actions[actions_n].action;
> + flow->actions |= MLX5_FLOW_ACTION_TUNNEL_DECAP;
> + actions_n++;
> + break;
> + case RTE_FLOW_ACTION_TYPE_TUNNEL_DECAP_L3:
> + dev_flow->dv.actions[actions_n].type =
> + MLX5DV_FLOW_ACTION_IBV_FLOW_ACTION;
> + dev_flow->dv.actions[actions_n].action =
> + flow_dv_create_decap_l3(action, dev, error);
> + if (!(dev_flow->dv.actions[actions_n].action))
> + return -rte_errno;
> + dev_flow->dv.decap_verb =
> + dev_flow->dv.actions[actions_n].action;
> + flow->actions |= MLX5_FLOW_ACTION_TUNNEL_DECAP_L3;
> + actions_n++;
> + break;
> default:
> break;
> }
> @@ -1655,13 +1866,16 @@
> LIST_REMOVE(dev_flow, next);
> if (dev_flow->dv.matcher)
> flow_dv_matcher_release(dev, dev_flow->dv.matcher);
> -
It seems to be mistakenly included in this patch when you rebase the previous
patch. Please fix it in [4/4] and [3/4].
> if (dev_flow->dv.encap_verb) {
> claim_zero(mlx5_glue->destroy_flow_action
> (dev_flow->dv.encap_verb));
> dev_flow->dv.encap_verb = NULL;
> }
> -
Same here.
> + if (dev_flow->dv.decap_verb) {
> + claim_zero(mlx5_glue->destroy_flow_action
> + (dev_flow->dv.decap_verb));
> + dev_flow->dv.decap_verb = NULL;
> + }
> rte_free(dev_flow);
> }
> }
> --
> 1.8.3.1
>
Thanks, PSB.
> -----Original Message-----
> From: Yongseok Koh
> Sent: Tuesday, October 9, 2018 12:19 AM
> To: Dekel Peled <dekelp@mellanox.com>
> Cc: Shahaf Shuler <shahafs@mellanox.com>; dev@dpdk.org; Ori Kam
> <orika@mellanox.com>
> Subject: Re: [PATCH v2 4/4] net/mlx5: add L2 and L3 decap to Direct Verbs
> flow
>
> On Sun, Oct 07, 2018 at 05:25:08PM +0300, Dekel Peled wrote:
> > This patch adds support for Direct Verbs decap operations, L2 and L3.
> >
> > Signed-off-by: Dekel Peled <dekelp@mellanox.com>
>
> Same comment for the order of 'dev' arg.
Done.
>
> > Conflicts:
> > drivers/net/mlx5/mlx5_flow_dv.c
>
> What is this? Conflicts?
My bad, fixed.
>
> > ---
> > drivers/net/mlx5/mlx5_flow_dv.c | 224
> > +++++++++++++++++++++++++++++++++++++++-
> > 1 file changed, 219 insertions(+), 5 deletions(-)
> >
> > diff --git a/drivers/net/mlx5/mlx5_flow_dv.c
> > b/drivers/net/mlx5/mlx5_flow_dv.c index 221c76a..5b44f5b 100644
> > --- a/drivers/net/mlx5/mlx5_flow_dv.c
> > +++ b/drivers/net/mlx5/mlx5_flow_dv.c
> > @@ -120,11 +120,18 @@
> > RTE_FLOW_ERROR_TYPE_ACTION,
> NULL,
> > "can't have 2 encap actions in same"
> > " flow");
> > + if (action_flags & (MLX5_FLOW_ACTION_TUNNEL_DECAP |
> > + MLX5_FLOW_ACTION_TUNNEL_DECAP_L3))
> > + return rte_flow_error_set(error, EINVAL,
> > + RTE_FLOW_ERROR_TYPE_ACTION,
> NULL,
> > + "can't encap and decap in same"
> > + " flow");
> > if (attr->ingress)
> > return rte_flow_error_set(error, ENOTSUP,
> > -
> RTE_FLOW_ERROR_TYPE_ATTR_INGRESS, NULL,
> > - "encap action not supported for "
> > - "ingress");
> > +
> RTE_FLOW_ERROR_TYPE_ATTR_INGRESS,
> > + NULL,
> > + "encap action not supported for "
> > + "ingress");
>
> It seems to be mistakenly included in this patch when you rebase the
> previous patch. Please fix it in [4/4] and [3/4].
Done.
>
> > return 0;
> > }
> >
> > @@ -166,6 +173,12 @@
> > RTE_FLOW_ERROR_TYPE_ACTION,
> NULL,
> > "can't have 2 encap actions in same"
> > " flow");
> > + if (action_flags & (MLX5_FLOW_ACTION_TUNNEL_DECAP |
> > + MLX5_FLOW_ACTION_TUNNEL_DECAP_L3))
> > + return rte_flow_error_set(error, EINVAL,
> > + RTE_FLOW_ERROR_TYPE_ACTION,
> NULL,
> > + "can't encap and decap in same"
> > + " flow");
> > if (attr->ingress)
> > return rte_flow_error_set(error, ENOTSUP,
> >
> RTE_FLOW_ERROR_TYPE_ATTR_INGRESS, @@ -176,6 +189,100 @@ }
> >
> > /**
> > + * Validate the tunnel decap action
> > + *
> > + * @param[in] action_flags
> > + * holds the actions detected until now.
> > + * @param[in] attr
> > + * Pointer to flow attributes
> > + * @param[out] error
> > + * Pointer to error structure.
> > + *
> > + * @return
> > + * 0 on success, a negative errno value otherwise and rte_ernno is set.
> > + */
> > +static int
> > +flow_dv_validate_action_tunnel_decap(uint64_t action_flags,
> > + const struct rte_flow_attr *attr,
> > + struct rte_flow_error *error) {
> > + if (action_flags & MLX5_FLOW_ACTION_DROP)
> > + return rte_flow_error_set(error, EINVAL,
> > + RTE_FLOW_ERROR_TYPE_ACTION,
> NULL,
> > + "can't drop and decap in same
> flow");
> > + if (action_flags & (MLX5_FLOW_ACTION_TUNNEL_DECAP |
> > + MLX5_FLOW_ACTION_TUNNEL_DECAP_L3))
> > + return rte_flow_error_set(error, EINVAL,
> > + RTE_FLOW_ERROR_TYPE_ACTION,
> NULL,
> > + "can't have 2 decap actions in same"
> > + " flow");
> > + if (action_flags & (MLX5_FLOW_ACTION_TUNNEL_ENCAP |
> > + MLX5_FLOW_ACTION_TUNNEL_ENCAP_L3))
> > + return rte_flow_error_set(error, EINVAL,
> > + RTE_FLOW_ERROR_TYPE_ACTION,
> NULL,
> > + "can't encap and decap in same"
> > + " flow");
> > + if (attr->egress)
> > + return rte_flow_error_set(error, ENOTSUP,
> > +
> RTE_FLOW_ERROR_TYPE_ATTR_EGRESS, NULL,
> > + "decap action not supported for "
> > + "egress");
> > + return 0;
> > +}
> > +
> > +/**
> > + * Validate the tunnel decap L3 action
> > + *
> > + * @param[in] action_flags
> > + * holds the actions detected until now.
> > + * @param[in] action
> > + * Pointer to the decap action.
> > + * @param[in] attr
> > + * Pointer to flow attributes
> > + * @param[out] error
> > + * Pointer to error structure.
> > + *
> > + * @return
> > + * 0 on success, a negative errno value otherwise and rte_ernno is set.
> > + */
> > +static int
> > +flow_dv_validate_action_tunnel_decap_l3(uint64_t action_flags,
> > + const struct rte_flow_action *action,
> > + const struct rte_flow_attr *attr,
> > + struct rte_flow_error *error)
> > +{
> > + const struct rte_flow_action_tunnel_decap_l3 *tunnel_decap_l3 =
> > + action->conf;
> > +
> > + if (!tunnel_decap_l3 || !(tunnel_decap_l3->buf))
> > + return rte_flow_error_set(error, EINVAL,
> > + RTE_FLOW_ERROR_TYPE_ACTION,
> action,
> > + "configuration cannot be null");
> > + if (action_flags & MLX5_FLOW_ACTION_DROP)
> > + return rte_flow_error_set(error, EINVAL,
> > + RTE_FLOW_ERROR_TYPE_ACTION,
> NULL,
> > + "can't drop and decap in same
> flow");
> > + if (action_flags & (MLX5_FLOW_ACTION_TUNNEL_DECAP |
> > + MLX5_FLOW_ACTION_TUNNEL_DECAP_L3))
> > + return rte_flow_error_set(error, EINVAL,
> > + RTE_FLOW_ERROR_TYPE_ACTION,
> NULL,
> > + "can't have 2 decap actions in same"
> > + " flow");
> > + if (action_flags & (MLX5_FLOW_ACTION_TUNNEL_ENCAP |
> > + MLX5_FLOW_ACTION_TUNNEL_ENCAP_L3))
> > + return rte_flow_error_set(error, EINVAL,
> > + RTE_FLOW_ERROR_TYPE_ACTION,
> NULL,
> > + "can't encap and decap in same"
> > + " flow");
> > + if (attr->egress)
> > + return rte_flow_error_set(error, ENOTSUP,
> > +
> RTE_FLOW_ERROR_TYPE_ATTR_EGRESS, NULL,
> > + "decap action not supported for "
> > + "egress");
> > + return 0;
> > +}
> > +
> > +/**
> > * Convert encap action to DV specification.
> > *
> > * @param[in] action
> > @@ -245,6 +352,72 @@
> > }
> >
> > /**
> > + * Convert decap action to DV specification.
> > + *
> > + * @param[in] action
> > + * Pointer to action structure.
> > + * @param[in] dev
> > + * Pointer to rte_eth_dev structure.
> > + * @param[out] error
> > + * Pointer to the error structure.
> > + *
> > + * @return
> > + * Pointer to action on success, NULL otherwise and rte_errno is set.
> > + */
> > +static struct ibv_flow_action *
> > +flow_dv_create_decap(const struct rte_flow_action *action
> __rte_unused,
> > + struct rte_eth_dev *dev,
> > + struct rte_flow_error *error)
> > +{
> > + struct ibv_flow_action *decap_verb = NULL;
> > + struct priv *priv = dev->data->dev_private;
> > +
> > + decap_verb = mlx5_glue->dv_create_flow_action_packet_reformat
> > + (priv->ctx, 0, NULL,
> > +
> MLX5DV_FLOW_ACTION_PACKET_REFORMAT_TYPE_L2_TUNNEL_TO_L2,
> > + MLX5DV_FLOW_TABLE_TYPE_NIC_RX);
> > + if (!decap_verb)
> > + rte_flow_error_set(error, EINVAL,
> RTE_FLOW_ERROR_TYPE_ACTION,
> > + NULL, "cannot create decap action");
> > + return decap_verb;
> > +}
> > +
> > +/**
> > + * Convert decap L3 action to DV specification.
> > + *
> > + * @param[in] action
> > + * Pointer to action structure.
> > + * @param[in] dev
> > + * Pointer to rte_eth_dev structure.
> > + * @param[out] error
> > + * Pointer to the error structure.
> > + *
> > + * @return
> > + * Pointer to action on success, NULL otherwise and rte_errno is set.
> > + */
> > +static struct ibv_flow_action *
> > +flow_dv_create_decap_l3(const struct rte_flow_action *action,
> > + struct rte_eth_dev *dev,
> > + struct rte_flow_error *error)
> > +{
> > + struct ibv_flow_action *decap_l3_verb = NULL;
> > + const struct rte_flow_action_tunnel_decap_l3 *decap_l3_data;
> > + struct priv *priv = dev->data->dev_private;
> > +
> > + decap_l3_data =
> > + (const struct rte_flow_action_tunnel_decap_l3 *)action-
> >conf;
> > + decap_l3_verb = mlx5_glue-
> >dv_create_flow_action_packet_reformat
> > + (priv->ctx, decap_l3_data->size,
> > + decap_l3_data->size ? decap_l3_data->buf : NULL,
> > +
> MLX5DV_FLOW_ACTION_PACKET_REFORMAT_TYPE_L3_TUNNEL_TO_L2,
> > + MLX5DV_FLOW_TABLE_TYPE_NIC_RX);
> > + if (!decap_l3_verb)
> > + rte_flow_error_set(error, EINVAL,
> RTE_FLOW_ERROR_TYPE_ACTION,
> > + NULL, "cannot create decap L3 action");
> > + return decap_l3_verb;
> > +}
> > +
> > +/**
> > * Verify the @p attributes will be correctly understood by the NIC and
> store
> > * them in the @p flow if everything is correct.
> > *
> > @@ -505,6 +678,20 @@
> > return ret;
> > action_flags |=
> MLX5_FLOW_ACTION_TUNNEL_ENCAP_L3;
> > break;
> > + case RTE_FLOW_ACTION_TYPE_TUNNEL_DECAP:
> > + ret = flow_dv_validate_action_tunnel_decap
> > + (action_flags, attr, error);
> > + if (ret < 0)
> > + return ret;
> > + action_flags |=
> MLX5_FLOW_ACTION_TUNNEL_DECAP;
> > + break;
> > + case RTE_FLOW_ACTION_TYPE_TUNNEL_DECAP_L3:
> > + ret = flow_dv_validate_action_tunnel_decap_l3
> > + (action_flags, actions, attr, error);
> > + if (ret < 0)
> > + return ret;
> > + action_flags |=
> MLX5_FLOW_ACTION_TUNNEL_DECAP_L3;
> > + break;
> > default:
> > return rte_flow_error_set(error, ENOTSUP,
> >
> RTE_FLOW_ERROR_TYPE_ACTION,
> > @@ -1300,6 +1487,30 @@
> > flow->actions |= MLX5_FLOW_ACTION_TUNNEL_ENCAP_L3;
> > actions_n++;
> > break;
> > + case RTE_FLOW_ACTION_TYPE_TUNNEL_DECAP:
> > + dev_flow->dv.actions[actions_n].type =
> > + MLX5DV_FLOW_ACTION_IBV_FLOW_ACTION;
> > + dev_flow->dv.actions[actions_n].action =
> > + flow_dv_create_decap(action, dev, error);
> > + if (!(dev_flow->dv.actions[actions_n].action))
> > + return -rte_errno;
> > + dev_flow->dv.decap_verb =
> > + dev_flow->dv.actions[actions_n].action;
> > + flow->actions |= MLX5_FLOW_ACTION_TUNNEL_DECAP;
> > + actions_n++;
> > + break;
> > + case RTE_FLOW_ACTION_TYPE_TUNNEL_DECAP_L3:
> > + dev_flow->dv.actions[actions_n].type =
> > + MLX5DV_FLOW_ACTION_IBV_FLOW_ACTION;
> > + dev_flow->dv.actions[actions_n].action =
> > + flow_dv_create_decap_l3(action, dev, error);
> > + if (!(dev_flow->dv.actions[actions_n].action))
> > + return -rte_errno;
> > + dev_flow->dv.decap_verb =
> > + dev_flow->dv.actions[actions_n].action;
> > + flow->actions |= MLX5_FLOW_ACTION_TUNNEL_DECAP_L3;
> > + actions_n++;
> > + break;
> > default:
> > break;
> > }
> > @@ -1655,13 +1866,16 @@
> > LIST_REMOVE(dev_flow, next);
> > if (dev_flow->dv.matcher)
> > flow_dv_matcher_release(dev, dev_flow-
> >dv.matcher);
> > -
>
> It seems to be mistakenly included in this patch when you rebase the
> previous patch. Please fix it in [4/4] and [3/4].
Done.
>
> > if (dev_flow->dv.encap_verb) {
> > claim_zero(mlx5_glue->destroy_flow_action
> > (dev_flow->dv.encap_verb));
> > dev_flow->dv.encap_verb = NULL;
> > }
> > -
>
> Same here.
Done.
>
> > + if (dev_flow->dv.decap_verb) {
> > + claim_zero(mlx5_glue->destroy_flow_action
> > + (dev_flow->dv.decap_verb));
> > + dev_flow->dv.decap_verb = NULL;
> > + }
> > rte_free(dev_flow);
> > }
> > }
> > --
> > 1.8.3.1
> >
@@ -120,11 +120,18 @@
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"can't have 2 encap actions in same"
" flow");
+ if (action_flags & (MLX5_FLOW_ACTION_TUNNEL_DECAP |
+ MLX5_FLOW_ACTION_TUNNEL_DECAP_L3))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can't encap and decap in same"
+ " flow");
if (attr->ingress)
return rte_flow_error_set(error, ENOTSUP,
- RTE_FLOW_ERROR_TYPE_ATTR_INGRESS, NULL,
- "encap action not supported for "
- "ingress");
+ RTE_FLOW_ERROR_TYPE_ATTR_INGRESS,
+ NULL,
+ "encap action not supported for "
+ "ingress");
return 0;
}
@@ -166,6 +173,12 @@
RTE_FLOW_ERROR_TYPE_ACTION, NULL,
"can't have 2 encap actions in same"
" flow");
+ if (action_flags & (MLX5_FLOW_ACTION_TUNNEL_DECAP |
+ MLX5_FLOW_ACTION_TUNNEL_DECAP_L3))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can't encap and decap in same"
+ " flow");
if (attr->ingress)
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ATTR_INGRESS,
@@ -176,6 +189,100 @@
}
/**
+ * Validate the tunnel decap action
+ *
+ * @param[in] action_flags
+ * holds the actions detected until now.
+ * @param[in] attr
+ * Pointer to flow attributes
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_ernno is set.
+ */
+static int
+flow_dv_validate_action_tunnel_decap(uint64_t action_flags,
+ const struct rte_flow_attr *attr,
+ struct rte_flow_error *error)
+{
+ if (action_flags & MLX5_FLOW_ACTION_DROP)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can't drop and decap in same flow");
+ if (action_flags & (MLX5_FLOW_ACTION_TUNNEL_DECAP |
+ MLX5_FLOW_ACTION_TUNNEL_DECAP_L3))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can't have 2 decap actions in same"
+ " flow");
+ if (action_flags & (MLX5_FLOW_ACTION_TUNNEL_ENCAP |
+ MLX5_FLOW_ACTION_TUNNEL_ENCAP_L3))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can't encap and decap in same"
+ " flow");
+ if (attr->egress)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ATTR_EGRESS, NULL,
+ "decap action not supported for "
+ "egress");
+ return 0;
+}
+
+/**
+ * Validate the tunnel decap L3 action
+ *
+ * @param[in] action_flags
+ * holds the actions detected until now.
+ * @param[in] action
+ * Pointer to the decap action.
+ * @param[in] attr
+ * Pointer to flow attributes
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_ernno is set.
+ */
+static int
+flow_dv_validate_action_tunnel_decap_l3(uint64_t action_flags,
+ const struct rte_flow_action *action,
+ const struct rte_flow_attr *attr,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_action_tunnel_decap_l3 *tunnel_decap_l3 =
+ action->conf;
+
+ if (!tunnel_decap_l3 || !(tunnel_decap_l3->buf))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, action,
+ "configuration cannot be null");
+ if (action_flags & MLX5_FLOW_ACTION_DROP)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can't drop and decap in same flow");
+ if (action_flags & (MLX5_FLOW_ACTION_TUNNEL_DECAP |
+ MLX5_FLOW_ACTION_TUNNEL_DECAP_L3))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can't have 2 decap actions in same"
+ " flow");
+ if (action_flags & (MLX5_FLOW_ACTION_TUNNEL_ENCAP |
+ MLX5_FLOW_ACTION_TUNNEL_ENCAP_L3))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can't encap and decap in same"
+ " flow");
+ if (attr->egress)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ATTR_EGRESS, NULL,
+ "decap action not supported for "
+ "egress");
+ return 0;
+}
+
+/**
* Convert encap action to DV specification.
*
* @param[in] action
@@ -245,6 +352,72 @@
}
/**
+ * Convert decap action to DV specification.
+ *
+ * @param[in] action
+ * Pointer to action structure.
+ * @param[in] dev
+ * Pointer to rte_eth_dev structure.
+ * @param[out] error
+ * Pointer to the error structure.
+ *
+ * @return
+ * Pointer to action on success, NULL otherwise and rte_errno is set.
+ */
+static struct ibv_flow_action *
+flow_dv_create_decap(const struct rte_flow_action *action __rte_unused,
+ struct rte_eth_dev *dev,
+ struct rte_flow_error *error)
+{
+ struct ibv_flow_action *decap_verb = NULL;
+ struct priv *priv = dev->data->dev_private;
+
+ decap_verb = mlx5_glue->dv_create_flow_action_packet_reformat
+ (priv->ctx, 0, NULL,
+ MLX5DV_FLOW_ACTION_PACKET_REFORMAT_TYPE_L2_TUNNEL_TO_L2,
+ MLX5DV_FLOW_TABLE_TYPE_NIC_RX);
+ if (!decap_verb)
+ rte_flow_error_set(error, EINVAL, RTE_FLOW_ERROR_TYPE_ACTION,
+ NULL, "cannot create decap action");
+ return decap_verb;
+}
+
+/**
+ * Convert decap L3 action to DV specification.
+ *
+ * @param[in] action
+ * Pointer to action structure.
+ * @param[in] dev
+ * Pointer to rte_eth_dev structure.
+ * @param[out] error
+ * Pointer to the error structure.
+ *
+ * @return
+ * Pointer to action on success, NULL otherwise and rte_errno is set.
+ */
+static struct ibv_flow_action *
+flow_dv_create_decap_l3(const struct rte_flow_action *action,
+ struct rte_eth_dev *dev,
+ struct rte_flow_error *error)
+{
+ struct ibv_flow_action *decap_l3_verb = NULL;
+ const struct rte_flow_action_tunnel_decap_l3 *decap_l3_data;
+ struct priv *priv = dev->data->dev_private;
+
+ decap_l3_data =
+ (const struct rte_flow_action_tunnel_decap_l3 *)action->conf;
+ decap_l3_verb = mlx5_glue->dv_create_flow_action_packet_reformat
+ (priv->ctx, decap_l3_data->size,
+ decap_l3_data->size ? decap_l3_data->buf : NULL,
+ MLX5DV_FLOW_ACTION_PACKET_REFORMAT_TYPE_L3_TUNNEL_TO_L2,
+ MLX5DV_FLOW_TABLE_TYPE_NIC_RX);
+ if (!decap_l3_verb)
+ rte_flow_error_set(error, EINVAL, RTE_FLOW_ERROR_TYPE_ACTION,
+ NULL, "cannot create decap L3 action");
+ return decap_l3_verb;
+}
+
+/**
* Verify the @p attributes will be correctly understood by the NIC and store
* them in the @p flow if everything is correct.
*
@@ -505,6 +678,20 @@
return ret;
action_flags |= MLX5_FLOW_ACTION_TUNNEL_ENCAP_L3;
break;
+ case RTE_FLOW_ACTION_TYPE_TUNNEL_DECAP:
+ ret = flow_dv_validate_action_tunnel_decap
+ (action_flags, attr, error);
+ if (ret < 0)
+ return ret;
+ action_flags |= MLX5_FLOW_ACTION_TUNNEL_DECAP;
+ break;
+ case RTE_FLOW_ACTION_TYPE_TUNNEL_DECAP_L3:
+ ret = flow_dv_validate_action_tunnel_decap_l3
+ (action_flags, actions, attr, error);
+ if (ret < 0)
+ return ret;
+ action_flags |= MLX5_FLOW_ACTION_TUNNEL_DECAP_L3;
+ break;
default:
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION,
@@ -1300,6 +1487,30 @@
flow->actions |= MLX5_FLOW_ACTION_TUNNEL_ENCAP_L3;
actions_n++;
break;
+ case RTE_FLOW_ACTION_TYPE_TUNNEL_DECAP:
+ dev_flow->dv.actions[actions_n].type =
+ MLX5DV_FLOW_ACTION_IBV_FLOW_ACTION;
+ dev_flow->dv.actions[actions_n].action =
+ flow_dv_create_decap(action, dev, error);
+ if (!(dev_flow->dv.actions[actions_n].action))
+ return -rte_errno;
+ dev_flow->dv.decap_verb =
+ dev_flow->dv.actions[actions_n].action;
+ flow->actions |= MLX5_FLOW_ACTION_TUNNEL_DECAP;
+ actions_n++;
+ break;
+ case RTE_FLOW_ACTION_TYPE_TUNNEL_DECAP_L3:
+ dev_flow->dv.actions[actions_n].type =
+ MLX5DV_FLOW_ACTION_IBV_FLOW_ACTION;
+ dev_flow->dv.actions[actions_n].action =
+ flow_dv_create_decap_l3(action, dev, error);
+ if (!(dev_flow->dv.actions[actions_n].action))
+ return -rte_errno;
+ dev_flow->dv.decap_verb =
+ dev_flow->dv.actions[actions_n].action;
+ flow->actions |= MLX5_FLOW_ACTION_TUNNEL_DECAP_L3;
+ actions_n++;
+ break;
default:
break;
}
@@ -1655,13 +1866,16 @@
LIST_REMOVE(dev_flow, next);
if (dev_flow->dv.matcher)
flow_dv_matcher_release(dev, dev_flow->dv.matcher);
-
if (dev_flow->dv.encap_verb) {
claim_zero(mlx5_glue->destroy_flow_action
(dev_flow->dv.encap_verb));
dev_flow->dv.encap_verb = NULL;
}
-
+ if (dev_flow->dv.decap_verb) {
+ claim_zero(mlx5_glue->destroy_flow_action
+ (dev_flow->dv.decap_verb));
+ dev_flow->dv.decap_verb = NULL;
+ }
rte_free(dev_flow);
}
}