diff mbox

[dpdk-dev] compressdev: clarify buffer size limitation

Message ID 1526480339-13056-1-git-send-email-fiona.trahe@intel.com (mailing list archive)
State Accepted, archived
Delegated to: Pablo de Lara Guarch
Headers

Checks

Context Check Description
ci/checkpatch success coding style OK
ci/Intel-compilation success Compilation OK

Commit Message

Fiona Trahe May 16, 2018, 2:18 p.m. UTC 
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
---
 lib/librte_compressdev/rte_comp.h | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

Comments

Verma, Shally May 17, 2018, 6:10 a.m. UTC | #1 
>-----Original Message-----
>From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Fiona Trahe
>Sent: 16 May 2018 19:49
>To: dev@dpdk.org
>Cc: pablo.de.lara.guarch@intel.com; fiona.trahe@intel.com
>Subject: [dpdk-dev] [PATCH] compressdev: clarify buffer size limitation
>
>Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
>---
> lib/librte_compressdev/rte_comp.h | 11 +++++++++--
> 1 file changed, 9 insertions(+), 2 deletions(-)
>
>diff --git a/lib/librte_compressdev/rte_comp.h b/lib/librte_compressdev/rte_comp.h
>index 4c802195f..9826086b1 100644
>--- a/lib/librte_compressdev/rte_comp.h
>+++ b/lib/librte_compressdev/rte_comp.h
>@@ -295,12 +295,19 @@ struct rte_comp_op {
> 	struct rte_mbuf *m_src;
> 	/**< source mbuf
> 	 * The total size of the input buffer(s) can be retrieved using
>-	 * rte_pktmbuf_data_len(m_src)
>+	 * rte_pktmbuf_data_len(m_src). The max data size which can fit in a
>+	 * single mbuf is limited by the uint16_t rte_mbuf.data_len to 64k-1.
>+	 * If the input data is bigger than this it can be passed to the PMD in
>+	 * a chain of mbufs if the PMD's capabilities indicate it supports this.
> 	 */
> 	struct rte_mbuf *m_dst;
> 	/**< destination mbuf
> 	 * The total size of the output buffer(s) can be retrieved using
>-	 * rte_pktmbuf_data_len(m_dst)
>+	 * rte_pktmbuf_data_len(m_dst). The max data size which can fit in a
>+	 * single mbuf is limited by the uint16_t rte_mbuf.data_len to 64k-1.
>+	 * If the output data is expected to be bigger than this a chain of
>+	 * mbufs can be passed to the PMD if the PMD's capabilities indicate
>+	 * it supports this.
> 	 */
[Shally] It will be good idea to add bit more clarification regarding src.offset and dst.offset as well, that is, offset is offset from start of very first segment of m_src and m_dst in chained bufs.

>
> 	struct {
>--
>2.13.6
De Lara Guarch, Pablo May 21, 2018, 10:32 p.m. UTC | #2 
> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Verma, Shally
> Sent: Thursday, May 17, 2018 7:10 AM
> To: Trahe, Fiona <fiona.trahe@intel.com>; dev@dpdk.org
> Cc: De Lara Guarch, Pablo <pablo.de.lara.guarch@intel.com>; Gupta, Ashish
> <Ashish.Gupta@cavium.com>; Sahu, Sunila <Sunila.Sahu@cavium.com>
> Subject: Re: [dpdk-dev] [PATCH] compressdev: clarify buffer size limitation
> 
> 
> 
> >-----Original Message-----
> >From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Fiona Trahe
> >Sent: 16 May 2018 19:49
> >To: dev@dpdk.org
> >Cc: pablo.de.lara.guarch@intel.com; fiona.trahe@intel.com
> >Subject: [dpdk-dev] [PATCH] compressdev: clarify buffer size limitation
> >
> >Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
> >---
> > lib/librte_compressdev/rte_comp.h | 11 +++++++++--
> > 1 file changed, 9 insertions(+), 2 deletions(-)
> >
> >diff --git a/lib/librte_compressdev/rte_comp.h
> b/lib/librte_compressdev/rte_comp.h
> >index 4c802195f..9826086b1 100644
> >--- a/lib/librte_compressdev/rte_comp.h
> >+++ b/lib/librte_compressdev/rte_comp.h
> >@@ -295,12 +295,19 @@ struct rte_comp_op {
> > 	struct rte_mbuf *m_src;
> > 	/**< source mbuf
> > 	 * The total size of the input buffer(s) can be retrieved using
> >-	 * rte_pktmbuf_data_len(m_src)
> >+	 * rte_pktmbuf_data_len(m_src). The max data size which can fit in a
> >+	 * single mbuf is limited by the uint16_t rte_mbuf.data_len to 64k-1.
> >+	 * If the input data is bigger than this it can be passed to the PMD in
> >+	 * a chain of mbufs if the PMD's capabilities indicate it supports this.
> > 	 */
> > 	struct rte_mbuf *m_dst;
> > 	/**< destination mbuf
> > 	 * The total size of the output buffer(s) can be retrieved using
> >-	 * rte_pktmbuf_data_len(m_dst)
> >+	 * rte_pktmbuf_data_len(m_dst). The max data size which can fit in a
> >+	 * single mbuf is limited by the uint16_t rte_mbuf.data_len to 64k-1.
> >+	 * If the output data is expected to be bigger than this a chain of
> >+	 * mbufs can be passed to the PMD if the PMD's capabilities indicate
> >+	 * it supports this.
> > 	 */
> [Shally] It will be good idea to add bit more clarification regarding src.offset and
> dst.offset as well, that is, offset is offset from start of very first segment of
> m_src and m_dst in chained bufs.

I'd say there should be a separate patch addressing this comment.
This one looks ok to me.

Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
De Lara Guarch, Pablo May 22, 2018, 10:08 a.m. UTC | #3 
> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of De Lara Guarch, Pablo
> Sent: Monday, May 21, 2018 11:32 PM
> To: Verma, Shally <Shally.Verma@cavium.com>; Trahe, Fiona
> <fiona.trahe@intel.com>; dev@dpdk.org
> Cc: Gupta, Ashish <Ashish.Gupta@cavium.com>; Sahu, Sunila
> <Sunila.Sahu@cavium.com>
> Subject: Re: [dpdk-dev] [PATCH] compressdev: clarify buffer size limitation
> 
> 
> 
> > -----Original Message-----
> > From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Verma, Shally
> > Sent: Thursday, May 17, 2018 7:10 AM
> > To: Trahe, Fiona <fiona.trahe@intel.com>; dev@dpdk.org
> > Cc: De Lara Guarch, Pablo <pablo.de.lara.guarch@intel.com>; Gupta,
> > Ashish <Ashish.Gupta@cavium.com>; Sahu, Sunila
> > <Sunila.Sahu@cavium.com>
> > Subject: Re: [dpdk-dev] [PATCH] compressdev: clarify buffer size
> > limitation
> >
> >
> >
> > >-----Original Message-----
> > >From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Fiona Trahe
> > >Sent: 16 May 2018 19:49
> > >To: dev@dpdk.org
> > >Cc: pablo.de.lara.guarch@intel.com; fiona.trahe@intel.com
> > >Subject: [dpdk-dev] [PATCH] compressdev: clarify buffer size
> > >limitation
> > >
> > >Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
> > >---
> > > lib/librte_compressdev/rte_comp.h | 11 +++++++++--
> > > 1 file changed, 9 insertions(+), 2 deletions(-)
> > >
> > >diff --git a/lib/librte_compressdev/rte_comp.h
> > b/lib/librte_compressdev/rte_comp.h
> > >index 4c802195f..9826086b1 100644
> > >--- a/lib/librte_compressdev/rte_comp.h
> > >+++ b/lib/librte_compressdev/rte_comp.h
> > >@@ -295,12 +295,19 @@ struct rte_comp_op {
> > > 	struct rte_mbuf *m_src;
> > > 	/**< source mbuf
> > > 	 * The total size of the input buffer(s) can be retrieved using
> > >-	 * rte_pktmbuf_data_len(m_src)
> > >+	 * rte_pktmbuf_data_len(m_src). The max data size which can fit in a
> > >+	 * single mbuf is limited by the uint16_t rte_mbuf.data_len to 64k-1.
> > >+	 * If the input data is bigger than this it can be passed to the PMD in
> > >+	 * a chain of mbufs if the PMD's capabilities indicate it supports this.
> > > 	 */
> > > 	struct rte_mbuf *m_dst;
> > > 	/**< destination mbuf
> > > 	 * The total size of the output buffer(s) can be retrieved using
> > >-	 * rte_pktmbuf_data_len(m_dst)
> > >+	 * rte_pktmbuf_data_len(m_dst). The max data size which can fit in a
> > >+	 * single mbuf is limited by the uint16_t rte_mbuf.data_len to 64k-1.
> > >+	 * If the output data is expected to be bigger than this a chain of
> > >+	 * mbufs can be passed to the PMD if the PMD's capabilities indicate
> > >+	 * it supports this.
> > > 	 */
> > [Shally] It will be good idea to add bit more clarification regarding
> > src.offset and dst.offset as well, that is, offset is offset from
> > start of very first segment of m_src and m_dst in chained bufs.
> 
> I'd say there should be a separate patch addressing this comment.
> This one looks ok to me.
> 
> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>

Applied to dpdk-next-crypto.
Thanks,

Pablo
diff mbox

Patch

diff --git a/lib/librte_compressdev/rte_comp.h b/lib/librte_compressdev/rte_comp.h
index 4c802195f..9826086b1 100644
--- a/lib/librte_compressdev/rte_comp.h
+++ b/lib/librte_compressdev/rte_comp.h
@@ -295,12 +295,19 @@  struct rte_comp_op {
 	struct rte_mbuf *m_src;
 	/**< source mbuf
 	 * The total size of the input buffer(s) can be retrieved using
-	 * rte_pktmbuf_data_len(m_src)
+	 * rte_pktmbuf_data_len(m_src). The max data size which can fit in a
+	 * single mbuf is limited by the uint16_t rte_mbuf.data_len to 64k-1.
+	 * If the input data is bigger than this it can be passed to the PMD in
+	 * a chain of mbufs if the PMD's capabilities indicate it supports this.
 	 */
 	struct rte_mbuf *m_dst;
 	/**< destination mbuf
 	 * The total size of the output buffer(s) can be retrieved using
-	 * rte_pktmbuf_data_len(m_dst)
+	 * rte_pktmbuf_data_len(m_dst). The max data size which can fit in a
+	 * single mbuf is limited by the uint16_t rte_mbuf.data_len to 64k-1.
+	 * If the output data is expected to be bigger than this a chain of
+	 * mbufs can be passed to the PMD if the PMD's capabilities indicate
+	 * it supports this.
 	 */
 
 	struct {