diff --git a/test/test/Makefile b/test/test/Makefile
index a88cc38..04ab522 100644
--- a/test/test/Makefile
+++ b/test/test/Makefile
@@ -180,6 +180,7 @@ SRCS-$(CONFIG_RTE_LIBRTE_PMD_RING) += test_pmd_ring_perf.c
 
 SRCS-$(CONFIG_RTE_LIBRTE_CRYPTODEV) += test_cryptodev_blockcipher.c
 SRCS-$(CONFIG_RTE_LIBRTE_CRYPTODEV) += test_cryptodev.c
+SRCS-$(CONFIG_RTE_LIBRTE_CRYPTODEV) += test_cryptodev_asym.c
 
 ifeq ($(CONFIG_RTE_LIBRTE_EVENTDEV),y)
 SRCS-y += test_eventdev.c
@@ -200,7 +201,7 @@ CFLAGS += $(WERROR_FLAGS)
 
 CFLAGS += -D_GNU_SOURCE
 
-LDLIBS += -lm
+LDLIBS += -lm -lcrypto
 
 # Disable VTA for memcpy test
 ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y)
diff --git a/test/test/test_cryptodev_asym.c b/test/test/test_cryptodev_asym.c
new file mode 100644
index 0000000..5f15d10
--- /dev/null
+++ b/test/test/test_cryptodev_asym.c
@@ -0,0 +1,1785 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2017-2018 Cavium Networks
+ */
+
+#include <rte_common.h>
+#include <rte_hexdump.h>
+#include <rte_mbuf.h>
+#include <rte_malloc.h>
+#include <rte_memcpy.h>
+#include <rte_pause.h>
+#include <rte_bus_vdev.h>
+
+#include <rte_crypto.h>
+#include <rte_cryptodev.h>
+#include <rte_cryptodev_pmd.h>
+#include <openssl/ssl.h>
+
+#include "test.h"
+#include "test_cryptodev.h"
+
+#define TEST_DATA_SIZE 4096
+#define TEST_NUM_BUFS 10
+#define TEST_NUM_SESSIONS 4
+#define ASYM_TEST_MSG_LEN	256
+#define TEST_DH_MOD_LEN 1024
+
+static int gbl_driver_id;
+struct crypto_testsuite_params {
+	struct rte_mempool *op_mpool;
+	struct rte_mempool *session_mpool;
+	struct rte_cryptodev_config conf;
+	struct rte_cryptodev_qp_conf qp_conf;
+	uint8_t valid_devs[RTE_CRYPTO_MAX_DEVS];
+	uint8_t valid_dev_count;
+};
+
+struct crypto_unittest_params {
+	struct rte_cryptodev_asym_session *sess;
+	struct rte_crypto_op *op;
+};
+
+static struct crypto_testsuite_params testsuite_params = { NULL };
+
+struct rsa_test_data {
+	enum rte_crypto_asym_op_type op_type;
+
+	struct {
+		uint8_t data[TEST_DATA_SIZE];
+		unsigned int len;
+	} plainText;
+	struct {
+		uint8_t data[TEST_DATA_SIZE];
+		unsigned int len;
+	} encryptedText;
+	struct {
+		uint8_t data[TEST_DATA_SIZE];
+		unsigned int len;
+	} signText;
+};
+
+#pragma GCC diagnostic push
+#pragma GCC diagnostic ignored "-Wcast-qual"
+
+static unsigned char base[] = {	0xF8, 0xBA, 0x1A, 0x55, 0xD0, 0x2F, 0x85,
+				0xAE, 0x96, 0x7B, 0xB6, 0x2F, 0xB6, 0xCD,
+				0xA8, 0xEB, 0x7E, 0x78, 0xA0, 0x50 };
+
+static struct rsa_test_data rsa_test_case = {
+	.op_type = RTE_CRYPTO_ASYM_OP_ENCRYPT,
+	.plainText = {
+		.data = {
+			0xF8, 0xBA, 0x1A, 0x55, 0xD0, 0x2F, 0x85, 0xAE,
+			0x96, 0x7B, 0xB6, 0x2F, 0xB6, 0xCD, 0xA8, 0xEB,
+			0x7E, 0x78, 0xA0, 0x50
+		},
+		.len = 20
+	},
+	.encryptedText = {
+		.data = {
+			0x4B, 0x22, 0x88, 0xF1, 0x91, 0x5A, 0x6A, 0xCC,
+			0x75, 0xD6, 0x40, 0xE3, 0x58, 0xCA, 0xC8, 0x70,
+			0x9B, 0x2B, 0xC7, 0x36, 0x1F, 0xAE, 0x38, 0xF3,
+			0x97, 0xA6, 0xEE, 0xA7, 0xDB, 0xFF, 0x9F, 0x09,
+			0x73, 0x1A, 0x2F, 0x01, 0xFA, 0xAF, 0x77, 0x09,
+			0xE1, 0x8D, 0x3E, 0x2D, 0x1D, 0x45, 0x15, 0x66,
+			0xE1, 0x79, 0xD7, 0xC6, 0x94, 0x1D, 0x54, 0xBF,
+			0xDD, 0xAB, 0x46, 0x34, 0xC7, 0x55, 0x62, 0x5B,
+			0x9D, 0xBD, 0x28, 0xDB, 0x46, 0x0D, 0x2D, 0x3D,
+			0x41, 0x46, 0xDA, 0x45, 0x31, 0x78, 0xD5, 0xE7,
+			0x2C, 0xA4, 0x1F, 0x73, 0xBE, 0x62, 0x41, 0x2C,
+			0x5C, 0x8D, 0x0D, 0xFA, 0xCC, 0x4C, 0xC1, 0x69,
+			0x90, 0xC9, 0x50, 0x21, 0x20, 0x90, 0x72, 0x70,
+			0x55, 0xA0, 0x25, 0x11, 0x5B, 0x96, 0x96, 0x07,
+			0x98, 0x90, 0x10, 0x81, 0x9E, 0x32, 0x16, 0x02,
+			0x6F, 0x52, 0xCF, 0xDB, 0x57, 0x9C, 0x57, 0xD2
+		},
+		.len = 128
+	},
+	.signText = {
+		.data = {
+			0x2F, 0x42, 0xB3, 0xB1, 0x7F, 0xA8, 0x66, 0x00,
+			0xC6, 0xB4, 0x7D, 0x12, 0x67, 0x5F, 0x94, 0xF7,
+			0x25, 0xD6, 0x7E, 0x14, 0xE4, 0xC2, 0x63, 0xB2,
+			0xDC, 0x1B, 0x13, 0xC0, 0xDA, 0xDA, 0x0D, 0x32,
+			0x9B, 0xF4, 0x8A, 0x62, 0x90, 0xE7, 0xB3, 0xF3,
+			0xBB, 0x5A, 0xAB, 0x5F, 0xF8, 0xAF, 0xF4, 0x19,
+			0x0D, 0xA5, 0x66, 0x25, 0x95, 0x69, 0x57, 0x43,
+			0x87, 0x44, 0xB0, 0x92, 0x1A, 0x39, 0xA6, 0x97,
+			0x06, 0xFD, 0xF3, 0x20, 0x72, 0xFB, 0xEA, 0xEF,
+			0xCF, 0xD1, 0x88, 0xCA, 0x23, 0x26, 0xA9, 0xA9,
+			0x22, 0xCD, 0xA0, 0x10, 0xF9, 0x14, 0x28, 0xC7,
+			0x0E, 0x82, 0xE1, 0xCD, 0xC3, 0x31, 0x0F, 0x75,
+			0x6D, 0x69, 0xCD, 0x55, 0x30, 0xA3, 0x26, 0xCB,
+			0xF8, 0xBC, 0xF3, 0xC5, 0xFA, 0xD7, 0x7E, 0x51,
+			0x81, 0xC9, 0x5C, 0x9F, 0x2A, 0x40, 0x40, 0x83,
+			0xB3, 0xBA, 0xDB, 0x94, 0x2D, 0x31, 0x1C, 0xF8
+
+		},
+		.len = 128
+	}
+};
+
+/** rsa xform using exponent key */
+struct rte_crypto_asym_xform rsa_xform = {
+	.next = NULL,
+	.xform_type = RTE_CRYPTO_ASYM_XFORM_RSA,
+	.rsa = {
+		.n = {
+		.data =
+		(uint8_t *)
+		("\x00\xb3\xa1\xaf\xb7\x13\x08\x00\x0a\x35\xdc\x2b\x20\x8d"
+		"\xa1\xb5\xce\x47\x8a\xc3\x80\xf4\x7d\x4a\xa2\x62\xfd\x61\x7f"
+		"\xb5\xa8\xde\x0a\x17\x97\xa0\xbf\xdf\x56\x5a\x3d\x51\x56\x4f"
+		"\x70\x70\x3f\x63\x6a\x44\x5b\xad\x84\x0d\x3f\x27\x6e\x3b\x34"
+		"\x91\x60\x14\xb9\xaa\x72\xfd\xa3\x64\xd2\x03\xa7\x53\x87\x9e"
+		"\x88\x0b\xc1\x14\x93\x1a\x62\xff\xb1\x5d\x74\xcd\x59\x63\x18"
+		"\x11\x3d\x4f\xba\x75\xd4\x33\x4e\x23\x6b\x7b\x57\x44\xe1\xd3"
+		"\x03\x13\xa6\xf0\x8b\x60\xb0\x9e\xee\x75\x08\x9d\x71\x63\x13"
+		"\xcb\xa6\x81\x92\x14\x03\x22\x2d\xde\x55"),
+		.length = 129
+		},
+		.e = {
+		.data = (uint8_t *)("\x01\x00\x01"),
+		.length = 3
+		},
+		.key_type = RTE_RSA_KEY_TYPE_EXP,
+		{
+		.d = {
+		.data =
+		(uint8_t *)
+		("\x24\xd7\xea\xf4\x7f\xe0\xca\x31\x4d\xee\xc4\xa1\xbe\xab\x06"
+		"\x61\x32\xe7\x51\x46\x27\xdf\x72\xe9\x6f\xa8\x4c\xd1\x26\xef"
+		"\x65\xeb\x67\xff\x5f\xa7\x3b\x25\xb9\x08\x8e\xa0\x47\x56\xe6"
+		"\x8e\xf9\xd3\x18\x06\x3d\xc6\xb1\xf8\xdc\x1b\x8d\xe5\x30\x54"
+		"\x26\xac\x16\x3b\x7b\xad\x46\x9e\x21\x6a\x57\xe6\x81\x56\x1d"
+		"\x2a\xc4\x39\x63\x67\x81\x2c\xca\xcc\xf8\x42\x04\xbe\xcf\x8f"
+		"\x6c\x5b\x81\x46\xb9\xc7\x62\x90\x87\x35\x03\x9b\x89\xcb\x37"
+		"\xbd\xf1\x1b\x99\xa1\x9a\x78\xd5\x4c\xdd\x3f\x41\x0c\xb7\x1a"
+		"\xd9\x7b\x87\x5f\xbe\xb1\x83\x41"),
+		.length = 128
+		},
+		}
+	}
+};
+
+struct rte_crypto_asym_xform modex_xform = {
+	.next = NULL,
+	.xform_type = RTE_CRYPTO_ASYM_XFORM_MODEX,
+	.modex = {
+		.modulus = {
+			.data =
+			(uint8_t *)
+			("\x00\xb3\xa1\xaf\xb7\x13\x08\x00\x0a\x35\xdc\x2b\x20\x8d"
+			"\xa1\xb5\xce\x47\x8a\xc3\x80\xf4\x7d\x4a\xa2\x62\xfd\x61\x7f"
+			"\xb5\xa8\xde\x0a\x17\x97\xa0\xbf\xdf\x56\x5a\x3d\x51\x56\x4f"
+			"\x70\x70\x3f\x63\x6a\x44\x5b\xad\x84\x0d\x3f\x27\x6e\x3b\x34"
+			"\x91\x60\x14\xb9\xaa\x72\xfd\xa3\x64\xd2\x03\xa7\x53\x87\x9e"
+			"\x88\x0b\xc1\x14\x93\x1a\x62\xff\xb1\x5d\x74\xcd\x59\x63\x18"
+			"\x11\x3d\x4f\xba\x75\xd4\x33\x4e\x23\x6b\x7b\x57\x44\xe1\xd3"
+			"\x03\x13\xa6\xf0\x8b\x60\xb0\x9e\xee\x75\x08\x9d\x71\x63\x13"
+			"\xcb\xa6\x81\x92\x14\x03\x22\x2d\xde\x55"),
+			.length = 129
+		},
+		.exponent = {
+			.data = (uint8_t *)("\x01\x00\x01"),
+			.length = 3
+		}
+	}
+};
+
+struct rte_crypto_asym_xform modinv_xform = {
+	.next = NULL,
+	.xform_type = RTE_CRYPTO_ASYM_XFORM_MODINV,
+	.modinv = {
+		.modulus = {
+			.data =
+			(uint8_t *)
+			("\x00\xb3\xa1\xaf\xb7\x13\x08\x00\x0a\x35\xdc\x2b\x20\x8d"
+			"\xa1\xb5\xce\x47\x8a\xc3\x80\xf4\x7d\x4a\xa2\x62\xfd\x61\x7f"
+			"\xb5\xa8\xde\x0a\x17\x97\xa0\xbf\xdf\x56\x5a\x3d\x51\x56\x4f"
+			"\x70\x70\x3f\x63\x6a\x44\x5b\xad\x84\x0d\x3f\x27\x6e\x3b\x34"
+			"\x91\x60\x14\xb9\xaa\x72\xfd\xa3\x64\xd2\x03\xa7\x53\x87\x9e"
+			"\x88\x0b\xc1\x14\x93\x1a\x62\xff\xb1\x5d\x74\xcd\x59\x63\x18"
+			"\x11\x3d\x4f\xba\x75\xd4\x33\x4e\x23\x6b\x7b\x57\x44\xe1\xd3"
+			"\x03\x13\xa6\xf0\x8b\x60\xb0\x9e\xee\x75\x08\x9d\x71\x63\x13"
+			"\xcb\xa6\x81\x92\x14\x03\x22\x2d\xde\x55"),
+			.length = 129
+		}
+	}
+};
+
+#pragma GCC diagnostic pop
+
+static int
+test_rsa(struct rsa_test_data *t)
+{
+	struct crypto_testsuite_params *ts_params = &testsuite_params;
+	struct rte_mempool *op_mpool = ts_params->op_mpool;
+	struct rte_mempool *sess_mpool = ts_params->session_mpool;
+	uint8_t dev_id = ts_params->valid_devs[0];
+	struct rte_crypto_asym_op *asym_op = NULL;
+	struct rte_crypto_op *op = NULL, *result_op = NULL;
+	struct rte_cryptodev_asym_session *sess = NULL;
+	RSA *rsa = NULL;
+	int status = TEST_SUCCESS;
+	uint8_t tmp_buf[TEST_DATA_SIZE];
+	int tmp_len = 0;
+	uint8_t output_buf[TEST_DATA_SIZE] = {0};
+	uint8_t input_buf[TEST_DATA_SIZE] = {0};
+	char test_msg[ASYM_TEST_MSG_LEN + 1];
+
+	sess = rte_cryptodev_asym_session_create(sess_mpool);
+
+	if (!sess) {
+		snprintf(test_msg, ASYM_TEST_MSG_LEN, "line %u "
+				"FAILED: %s", __LINE__,
+				"Session creation failed");
+		status = TEST_FAILED;
+		goto error_exit;
+	}
+
+	if (rte_cryptodev_asym_session_init(dev_id, sess, &rsa_xform,
+			sess_mpool) < 0) {
+		snprintf(test_msg, ASYM_TEST_MSG_LEN,
+				"line %u FAILED: %s",
+				__LINE__, "unabled to config sym session");
+		status = TEST_FAILED;
+		goto error_exit;
+	}
+
+
+	/* set up crypto op data structure */
+	op = rte_crypto_op_alloc(op_mpool, RTE_CRYPTO_OP_TYPE_ASYMMETRIC);
+	if (!op) {
+		snprintf(test_msg, ASYM_TEST_MSG_LEN,
+			"line %u FAILED: %s",
+			__LINE__, "Failed to allocate asymmetric crypto "
+			"operation struct");
+		status = TEST_FAILED;
+		goto error_exit;
+	}
+
+	asym_op = op->asym;
+	asym_op->rsa.op_type = t->op_type;
+	asym_op->rsa.pad = RTE_CRYPTO_RSA_PKCS1_V1_5_BT1;
+
+	if (t->op_type == RTE_CRYPTO_ASYM_OP_ENCRYPT) {
+		memcpy(input_buf, t->plainText.data, t->plainText.len);
+		asym_op->rsa.message.data = input_buf;
+		asym_op->rsa.message.length = t->plainText.len;
+	} else if (t->op_type == RTE_CRYPTO_ASYM_OP_SIGN) {
+		asym_op->rsa.message.data = t->plainText.data;
+		asym_op->rsa.message.length = t->plainText.len;
+		asym_op->rsa.sign.data = output_buf;
+	} else if (t->op_type == RTE_CRYPTO_ASYM_OP_DECRYPT) {
+		memcpy(input_buf, t->encryptedText.data, t->encryptedText.len);
+		asym_op->rsa.message.data = input_buf;
+		asym_op->rsa.message.length = t->encryptedText.len;
+	} else if (t->op_type == RTE_CRYPTO_ASYM_OP_VERIFY) {
+		memcpy(input_buf, t->signText.data, t->signText.len);
+		asym_op->rsa.message.data = t->plainText.data;
+		asym_op->rsa.message.length = t->plainText.len;
+		asym_op->rsa.sign.data = input_buf;
+		asym_op->rsa.sign.length = t->signText.len;
+	}
+
+	/* attach asymmetric crypto session to crypto operations */
+	rte_crypto_op_attach_asym_session(op, sess);
+
+	snprintf(test_msg, ASYM_TEST_MSG_LEN, "Process ASYM operation");
+
+	/* Process crypto operation */
+	if (rte_cryptodev_enqueue_burst(dev_id, 0, &op, 1) != 1) {
+		snprintf(test_msg, ASYM_TEST_MSG_LEN,
+				"line %u FAILED: %s",
+				__LINE__, "Error sending packet for operation");
+		status = TEST_FAILED;
+		goto error_exit;
+	}
+
+	while (rte_cryptodev_dequeue_burst(dev_id, 0, &result_op, 1) == 0)
+		rte_pause();
+
+	if (result_op == NULL) {
+		snprintf(test_msg, ASYM_TEST_MSG_LEN,
+				"line %u FAILED: %s",
+				__LINE__, "Failed to process asym crypto op");
+		status = TEST_FAILED;
+		goto error_exit;
+	}
+
+	/* verify result using sw lib */
+	rsa = RSA_new();
+	if (rsa == NULL) {
+		snprintf(test_msg, ASYM_TEST_MSG_LEN,
+			"line %u FAILED: %s",
+			__LINE__, "Failed to allocate sw RSA");
+		status = TEST_FAILED;
+		goto error_exit;
+	}
+
+	rsa->n =
+		BN_bin2bn(
+			(const unsigned char *)rsa_xform.rsa.n.data,
+			rsa_xform.rsa.n.length,
+			rsa->n);
+	rsa->e = BN_bin2bn((const unsigned char *)rsa_xform.rsa.e.data,
+						rsa_xform.rsa.e.length,
+						rsa->e);
+	rsa->d = BN_bin2bn((const unsigned char *)rsa_xform.rsa.d.data,
+						rsa_xform.rsa.d.length,
+						rsa->d);
+
+	if (t->op_type == RTE_CRYPTO_ASYM_OP_ENCRYPT) {
+		debug_hexdump(stdout, "Encrypted output:",
+				asym_op->rsa.message.data,
+				asym_op->rsa.message.length);
+
+		/* decrypt using openssl lib */
+		tmp_len = RSA_private_decrypt(asym_op->rsa.message.length,
+						asym_op->rsa.message.data,
+						tmp_buf,
+						rsa,
+						RSA_PKCS1_PADDING);
+
+		if (memcmp(t->plainText.data, tmp_buf, tmp_len)) {
+			snprintf(test_msg,
+					 ASYM_TEST_MSG_LEN, "line %u "
+					"FAILED: %s", __LINE__,
+					"Crypto data not as expected");
+			status = TEST_FAILED;
+			goto error_exit;
+		}
+	} else if (t->op_type == RTE_CRYPTO_ASYM_OP_SIGN) {
+		debug_hexdump(stdout, "RSA Sign output:",
+				asym_op->rsa.sign.data,
+				asym_op->rsa.sign.length);
+
+		/* verify generated sign using openssl lib */
+		tmp_len = RSA_public_decrypt(asym_op->rsa.sign.length,
+						asym_op->rsa.sign.data,
+						tmp_buf, rsa,
+						RSA_PKCS1_PADDING);
+
+		if (memcmp(asym_op->rsa.message.data, tmp_buf, tmp_len)) {
+			snprintf(test_msg, ASYM_TEST_MSG_LEN, "line %u "
+					"FAILED: %s", __LINE__,
+					"Crypto data not as expected");
+			status = TEST_FAILED;
+			goto error_exit;
+		}
+	} else if (t->op_type == RTE_CRYPTO_ASYM_OP_DECRYPT) {
+		if (memcmp(asym_op->rsa.message.data,
+				t->plainText.data,
+				t->plainText.len)) {
+			snprintf(test_msg, ASYM_TEST_MSG_LEN, "line %u "
+					"FAILED: %s", __LINE__,
+					"Crypto data not as expected");
+			status = TEST_FAILED;
+			goto error_exit;
+		}
+	} else if (t->op_type == RTE_CRYPTO_ASYM_OP_VERIFY) {
+		/* compare verification output in sign to original message */
+		if (memcmp(asym_op->rsa.sign.data,
+				   asym_op->rsa.message.data,
+				   asym_op->rsa.message.length)) {
+			snprintf(test_msg, ASYM_TEST_MSG_LEN,
+					"line %u "
+					"FAILED: %s", __LINE__,
+					"Crypto data not as expected");
+			status = TEST_FAILED;
+			goto error_exit;
+		}
+	}
+
+	snprintf(test_msg, ASYM_TEST_MSG_LEN, "PASS");
+
+error_exit:
+	if (rsa)
+		RSA_free(rsa);
+	if (sess) {
+		rte_cryptodev_asym_session_clear(dev_id, sess);
+		rte_cryptodev_asym_session_free(sess);
+	}
+
+	if (op)
+		rte_crypto_op_free(op);
+
+	return status;
+}
+
+static int
+testsuite_setup(void)
+{
+	struct crypto_testsuite_params *ts_params = &testsuite_params;
+	struct rte_cryptodev_info info;
+	uint32_t i = 0, nb_devs, dev_id;
+	int ret;
+	uint16_t qp_id;
+
+	memset(ts_params, 0, sizeof(*ts_params));
+
+	ts_params->op_mpool = rte_crypto_op_pool_create(
+			"CRYPTO_ASYM_OP_POOL",
+			RTE_CRYPTO_OP_TYPE_ASYMMETRIC,
+			TEST_NUM_BUFS, 0,
+			0,
+			rte_socket_id());
+	if (ts_params->op_mpool == NULL) {
+		RTE_LOG(ERR, USER1, "Can't create ASYM_CRYPTO_OP_POOL\n");
+		return TEST_FAILED;
+	}
+
+	/* Create an OPENSSL device if required */
+	if (gbl_driver_id == rte_cryptodev_driver_id_get(
+			RTE_STR(CRYPTODEV_NAME_OPENSSL_PMD))) {
+		nb_devs = rte_cryptodev_device_count_by_driver(
+				rte_cryptodev_driver_id_get(
+				RTE_STR(CRYPTODEV_NAME_OPENSSL_PMD)));
+		if (nb_devs < 1) {
+			ret = rte_vdev_init(
+				RTE_STR(CRYPTODEV_NAME_OPENSSL_PMD),
+				NULL);
+
+			TEST_ASSERT(ret == 0, "Failed to create "
+				"instance of pmd : %s",
+				RTE_STR(CRYPTODEV_NAME_OPENSSL_PMD));
+		}
+	}
+
+	nb_devs = rte_cryptodev_count();
+	if (nb_devs < 1) {
+		RTE_LOG(ERR, USER1, "No crypto devices found?\n");
+		return TEST_FAILED;
+	}
+
+	/* Create list of valid crypto devs */
+	for (i = 0; i < nb_devs; i++) {
+		rte_cryptodev_info_get(i, &info);
+		if (info.driver_id == gbl_driver_id)
+			ts_params->valid_devs[ts_params->valid_dev_count++] = i;
+	}
+
+	if (ts_params->valid_dev_count < 1)
+		return TEST_FAILED;
+
+	/* Set up all the qps on the first of the valid devices found */
+
+	dev_id = ts_params->valid_devs[0];
+
+	rte_cryptodev_info_get(dev_id, &info);
+
+	/* check if device support asymmetric , skip if not */
+	if (!(info.feature_flags &
+				RTE_CRYPTODEV_FF_ASYMMETRIC_CRYPTO)) {
+		RTE_LOG(ERR, USER1, "Device doesn't support asymmetric. "
+				"Test Skipped.\n");
+		return TEST_FAILED;
+	}
+
+	/* configure device with num qp */
+	ts_params->conf.nb_queue_pairs = info.max_nb_queue_pairs;
+	ts_params->conf.socket_id = SOCKET_ID_ANY;
+	TEST_ASSERT_SUCCESS(rte_cryptodev_configure(dev_id,
+			&ts_params->conf),
+			"Failed to configure cryptodev %u with %u qps",
+			dev_id, ts_params->conf.nb_queue_pairs);
+
+	/* configure qp */
+	ts_params->qp_conf.nb_descriptors = DEFAULT_NUM_OPS_INFLIGHT;
+	for (qp_id = 0; qp_id < info.max_nb_queue_pairs; qp_id++) {
+		TEST_ASSERT_SUCCESS(rte_cryptodev_queue_pair_setup(
+			dev_id, qp_id, &ts_params->qp_conf,
+			rte_cryptodev_socket_id(dev_id),
+			ts_params->session_mpool),
+			"Failed to setup queue pair %u on cryptodev %u ASYM",
+			qp_id, dev_id);
+	}
+
+	/* setup asym session pool */
+	unsigned int session_size =
+		rte_cryptodev_get_asym_session_private_size(dev_id);
+	/*
+	 * Create mempool with TEST_NUM_SESSIONS * 2,
+	 * to include the session headers
+	 */
+	ts_params->session_mpool = rte_mempool_create(
+				"test_asym_sess_mp",
+				TEST_NUM_SESSIONS * 2,
+				session_size,
+				0, 0, NULL, NULL, NULL,
+				NULL, SOCKET_ID_ANY,
+				0);
+
+	TEST_ASSERT_NOT_NULL(ts_params->session_mpool,
+			"session mempool allocation failed");
+
+	return TEST_SUCCESS;
+}
+
+static void
+testsuite_teardown(void)
+{
+	struct crypto_testsuite_params *ts_params = &testsuite_params;
+
+	if (ts_params->op_mpool != NULL) {
+		RTE_LOG(DEBUG, USER1, "CRYPTO_OP_POOL count %u\n",
+		rte_mempool_avail_count(ts_params->op_mpool));
+	}
+
+	/* Free session mempools */
+	if (ts_params->session_mpool != NULL) {
+		rte_mempool_free(ts_params->session_mpool);
+		ts_params->session_mpool = NULL;
+	}
+}
+
+static int
+ut_setup(void)
+{
+	struct crypto_testsuite_params *ts_params = &testsuite_params;
+
+	uint16_t qp_id;
+
+	/* Reconfigure device to default parameters */
+	ts_params->conf.socket_id = SOCKET_ID_ANY;
+
+	TEST_ASSERT_SUCCESS(rte_cryptodev_configure(ts_params->valid_devs[0],
+			&ts_params->conf),
+			"Failed to configure cryptodev %u",
+			ts_params->valid_devs[0]);
+
+	for (qp_id = 0; qp_id < ts_params->conf.nb_queue_pairs ; qp_id++) {
+		TEST_ASSERT_SUCCESS(rte_cryptodev_queue_pair_setup(
+			ts_params->valid_devs[0], qp_id,
+			&ts_params->qp_conf,
+			rte_cryptodev_socket_id(ts_params->valid_devs[0]),
+			ts_params->session_mpool),
+			"Failed to setup queue pair %u on cryptodev %u",
+			qp_id, ts_params->valid_devs[0]);
+	}
+
+	rte_cryptodev_stats_reset(ts_params->valid_devs[0]);
+
+	/* Start the device */
+	TEST_ASSERT_SUCCESS(rte_cryptodev_start(ts_params->valid_devs[0]),
+						"Failed to start cryptodev %u",
+						ts_params->valid_devs[0]);
+
+	return TEST_SUCCESS;
+}
+
+static void
+ut_teardown(void)
+{
+	struct crypto_testsuite_params *ts_params = &testsuite_params;
+	struct rte_cryptodev_stats stats;
+
+	rte_cryptodev_stats_get(ts_params->valid_devs[0], &stats);
+
+	/* Stop the device */
+	rte_cryptodev_stop(ts_params->valid_devs[0]);
+}
+
+static inline void print_asym_capa(
+		const struct rte_cryptodev_asymmetric_xfrm_capability	*capa)
+{
+	int i = 0;
+
+	printf("\nxform type: %s\n===================\n",
+			rte_crypto_asym_xform_strings[capa->xform_type]);
+	printf("operation supported -");
+
+	for (i = 0; i < RTE_CRYPTO_ASYM_OP_LIST_END; i++) {
+		/* check supported operations */
+		if (rte_cryptodev_asym_xfrm_capability_check_optype(capa, i))
+			printf(" %s",
+					rte_crypto_asym_op_strings[i]);
+		}
+		switch (capa->xform_type) {
+		case RTE_CRYPTO_ASYM_XFORM_RSA:
+		case RTE_CRYPTO_ASYM_XFORM_MODINV:
+		case RTE_CRYPTO_ASYM_XFORM_MODEX:
+		case RTE_CRYPTO_ASYM_XFORM_DH:
+		case RTE_CRYPTO_ASYM_XFORM_DSA:
+			printf(" modlen: min %d max %d increment %d\n",
+					capa->modlen.min,
+					capa->modlen.max,
+					capa->modlen.increment);
+		break;
+		default:
+			break;
+		}
+}
+
+/* ***** Plaintext data for tests ***** */
+static int
+test_capability(void)
+{
+	struct crypto_testsuite_params *ts_params = &testsuite_params;
+	uint8_t dev_id = ts_params->valid_devs[0];
+	struct rte_cryptodev_info dev_info;
+	int i = 0;
+	struct rte_cryptodev_asym_capability_idx idx;
+	const struct rte_cryptodev_asymmetric_xfrm_capability *capa;
+
+	rte_cryptodev_info_get(dev_id, &dev_info);
+	if (!(dev_info.feature_flags &
+				RTE_CRYPTODEV_FF_ASYMMETRIC_CRYPTO)) {
+		printf("Device doesn't support asymmetric. "
+				"Test Skipped.\n");
+		return TEST_SUCCESS;
+	}
+
+	/* print xfrm capability */
+	for (i = 0;
+		dev_info.capabilities[i].op != RTE_CRYPTO_OP_TYPE_UNDEFINED;
+		i++) {
+		if (dev_info.capabilities[i].op ==
+				RTE_CRYPTO_OP_TYPE_ASYMMETRIC) {
+			idx.type = dev_info.capabilities[i].asym.xform_type;
+
+			capa = rte_cryptodev_asym_capability_get(dev_id,
+				(const struct
+				rte_cryptodev_asym_capability_idx *) &idx);
+			print_asym_capa(capa);
+			}
+	}
+	return TEST_SUCCESS;
+}
+
+static int
+test_dh_gen_shared_sec(DH *testkey, struct rte_crypto_asym_xform *xfrm)
+{
+	struct crypto_testsuite_params *ts_params = &testsuite_params;
+	struct rte_mempool *op_mpool = ts_params->op_mpool;
+	struct rte_mempool *sess_mpool = ts_params->session_mpool;
+	uint8_t dev_id = ts_params->valid_devs[0];
+	struct rte_crypto_asym_op *asym_op = NULL;
+	struct rte_crypto_op *op = NULL, *result_op = NULL;
+	struct rte_cryptodev_asym_session *sess = NULL;
+	int status = TEST_SUCCESS;
+	char test_msg[ASYM_TEST_MSG_LEN + 1];
+	uint8_t output[TEST_DH_MOD_LEN];
+	struct rte_crypto_asym_xform xform = *xfrm;
+	uint8_t peer[] = "01234567890123456789012345678901234567890123456789";
+
+	sess = rte_cryptodev_asym_session_create(sess_mpool);
+	if (sess == NULL) {
+		snprintf(test_msg,
+				ASYM_TEST_MSG_LEN,
+				"line %u FAILED: %s", __LINE__,
+				"Session creation failed");
+		status = TEST_FAILED;
+		goto error_exit;
+	}
+	/* set up crypto op data structure */
+	op = rte_crypto_op_alloc(op_mpool, RTE_CRYPTO_OP_TYPE_ASYMMETRIC);
+	if (!op) {
+		snprintf(test_msg, ASYM_TEST_MSG_LEN,
+			"line %u FAILED: %s",
+			__LINE__, "Failed to allocate asymmetric crypto "
+			"operation struct");
+		status = TEST_FAILED;
+		goto error_exit;
+	}
+	asym_op = op->asym;
+
+	/* Setup a xform and op to generate private key only */
+	xform.dh.type = RTE_CRYPTO_ASYM_OP_SHARED_SECRET_COMPUTE;
+	xform.next = NULL;
+	asym_op->dh.priv_key.data = rte_malloc(NULL,
+					BN_num_bytes(testkey->priv_key),
+					0);
+	asym_op->dh.priv_key.length = BN_bn2bin(testkey->priv_key,
+					asym_op->dh.priv_key.data);
+	asym_op->dh.pub_key.data = (uint8_t *)peer;
+	asym_op->dh.pub_key.length = sizeof(peer);
+	asym_op->dh.shared_secret.data = output;
+	asym_op->dh.shared_secret.length = sizeof(output);
+
+	if (rte_cryptodev_asym_session_init(dev_id, sess, &xform,
+			sess_mpool) < 0) {
+		snprintf(test_msg, ASYM_TEST_MSG_LEN,
+				"line %u FAILED: %s",
+				__LINE__, "unabled to config sym session");
+		status = TEST_FAILED;
+		goto error_exit;
+	}
+
+	/* attach asymmetric crypto session to crypto operations */
+	rte_crypto_op_attach_asym_session(op, sess);
+
+	snprintf(test_msg, ASYM_TEST_MSG_LEN, "Process ASYM operation");
+
+	/* Process crypto operation */
+	if (rte_cryptodev_enqueue_burst(dev_id, 0, &op, 1) != 1) {
+		snprintf(test_msg, ASYM_TEST_MSG_LEN,
+			"line %u FAILED: %s",
+			__LINE__, "Error sending packet for operation");
+		status = TEST_FAILED;
+		goto error_exit;
+	}
+
+	while (rte_cryptodev_dequeue_burst(dev_id, 0, &result_op, 1) == 0)
+		rte_pause();
+
+	if (result_op == NULL) {
+		snprintf(test_msg, ASYM_TEST_MSG_LEN,
+			"line %u FAILED: %s",
+			__LINE__, "Failed to process asym crypto op");
+		status = TEST_FAILED;
+		goto error_exit;
+	}
+
+	debug_hexdump(stdout, "shared secret:",
+			asym_op->dh.shared_secret.data,
+			asym_op->dh.shared_secret.length);
+
+	/* compute shared secret using sw and compare */
+	BIGNUM *p = NULL;
+	p = BN_bin2bn(peer, sizeof(peer), p);
+	if (p != NULL) {
+		size_t test_len;
+		uint8_t *test_shared = rte_malloc(NULL, DH_size(testkey), 0);
+		test_len = DH_compute_key(test_shared, p, testkey);
+
+		debug_hexdump(stdout, "sw shared secret:",
+			test_shared,
+			test_len);
+
+		if ((test_len != asym_op->dh.shared_secret.length) ||
+		    (memcmp(test_shared,
+			asym_op->dh.shared_secret.data, test_len))) {
+			RTE_LOG(ERR, USER1,
+				"shared secret compute verification failed\n");
+			status = TEST_FAILED;
+		}
+		rte_free(test_shared);
+		BN_free(p);
+	}
+error_exit:
+	if (sess != NULL) {
+		rte_cryptodev_asym_session_clear(dev_id, sess);
+		rte_cryptodev_asym_session_free(sess);
+	}
+	if (op != NULL) {
+		if (asym_op->dh.priv_key.data != NULL)
+			rte_free(asym_op->dh.priv_key.data);
+		rte_crypto_op_free(op);
+	}
+	return status;
+}
+
+static int
+test_dh_gen_priv_key(DH *testkey __rte_unused,
+		     struct rte_crypto_asym_xform *xfrm)
+{
+	struct crypto_testsuite_params *ts_params = &testsuite_params;
+	struct rte_mempool *op_mpool = ts_params->op_mpool;
+	struct rte_mempool *sess_mpool = ts_params->session_mpool;
+	uint8_t dev_id = ts_params->valid_devs[0];
+	struct rte_crypto_asym_op *asym_op = NULL;
+	struct rte_crypto_op *op = NULL, *result_op = NULL;
+	struct rte_cryptodev_asym_session *sess = NULL;
+	int status = TEST_SUCCESS;
+	char test_msg[ASYM_TEST_MSG_LEN + 1];
+	uint8_t output[TEST_DH_MOD_LEN];
+	struct rte_crypto_asym_xform xform = *xfrm;
+
+	sess = rte_cryptodev_asym_session_create(sess_mpool);
+	if (sess == NULL) {
+		snprintf(test_msg,
+				 ASYM_TEST_MSG_LEN,
+				 "line %u FAILED: %s", __LINE__,
+				"Session creation failed");
+		status = TEST_FAILED;
+		goto error_exit;
+	}
+	/* set up crypto op data structure */
+	op = rte_crypto_op_alloc(op_mpool, RTE_CRYPTO_OP_TYPE_ASYMMETRIC);
+	if (!op) {
+		snprintf(test_msg, ASYM_TEST_MSG_LEN,
+			"line %u FAILED: %s",
+			__LINE__, "Failed to allocate asymmetric crypto "
+			"operation struct");
+		status = TEST_FAILED;
+		goto error_exit;
+	}
+	asym_op = op->asym;
+
+	/* Setup a xform and op to generate private key only */
+	xform.dh.type = RTE_CRYPTO_ASYM_OP_PRIVATE_KEY_GENERATE;
+	xform.next = NULL;
+	asym_op->dh.priv_key.data = output;
+	asym_op->dh.priv_key.length = sizeof(output);
+
+	if (rte_cryptodev_asym_session_init(dev_id, sess, &xform,
+			sess_mpool) < 0) {
+		snprintf(test_msg, ASYM_TEST_MSG_LEN,
+				"line %u FAILED: %s",
+				__LINE__, "unabled to config sym session");
+		status = TEST_FAILED;
+		goto error_exit;
+	}
+
+	/* attach asymmetric crypto session to crypto operations */
+	rte_crypto_op_attach_asym_session(op, sess);
+
+	snprintf(test_msg, ASYM_TEST_MSG_LEN, "Process ASYM operation");
+
+	/* Process crypto operation */
+	if (rte_cryptodev_enqueue_burst(dev_id, 0, &op, 1) != 1) {
+		snprintf(test_msg, ASYM_TEST_MSG_LEN,
+			"line %u FAILED: %s",
+			__LINE__, "Error sending packet for operation");
+		status = TEST_FAILED;
+		goto error_exit;
+	}
+
+	while (rte_cryptodev_dequeue_burst(dev_id, 0, &result_op, 1) == 0)
+		rte_pause();
+
+	if (result_op == NULL) {
+		snprintf(test_msg, ASYM_TEST_MSG_LEN,
+			"line %u FAILED: %s",
+			__LINE__, "Failed to process asym crypto op");
+		status = TEST_FAILED;
+		goto error_exit;
+	}
+
+	debug_hexdump(stdout, "private key:",
+			asym_op->dh.priv_key.data,
+			asym_op->dh.priv_key.length);
+
+
+error_exit:
+	if (sess != NULL) {
+		rte_cryptodev_asym_session_clear(dev_id, sess);
+		rte_cryptodev_asym_session_free(sess);
+	}
+	if (op != NULL)
+		rte_crypto_op_free(op);
+
+	return status;
+}
+
+
+static int
+test_dh_gen_pub_key(DH *testkey,
+		    struct rte_crypto_asym_xform *xfrm)
+{
+	struct crypto_testsuite_params *ts_params = &testsuite_params;
+	struct rte_mempool *op_mpool = ts_params->op_mpool;
+	struct rte_mempool *sess_mpool = ts_params->session_mpool;
+	uint8_t dev_id = ts_params->valid_devs[0];
+	struct rte_crypto_asym_op *asym_op = NULL;
+	struct rte_crypto_op *op = NULL, *result_op = NULL;
+	struct rte_cryptodev_asym_session *sess = NULL;
+	int status = TEST_SUCCESS;
+	char test_msg[ASYM_TEST_MSG_LEN + 1];
+	uint8_t output[TEST_DH_MOD_LEN];
+	struct rte_crypto_asym_xform xform = *xfrm;
+
+	sess = rte_cryptodev_asym_session_create(sess_mpool);
+	if (sess == NULL) {
+		snprintf(test_msg,
+				 ASYM_TEST_MSG_LEN,
+				 "line %u FAILED: %s", __LINE__,
+				"Session creation failed");
+		status = TEST_FAILED;
+		goto error_exit;
+	}
+	/* set up crypto op data structure */
+	op = rte_crypto_op_alloc(op_mpool, RTE_CRYPTO_OP_TYPE_ASYMMETRIC);
+	if (!op) {
+		snprintf(test_msg, ASYM_TEST_MSG_LEN,
+			"line %u FAILED: %s",
+			__LINE__, "Failed to allocate asymmetric crypto "
+			"operation struct");
+		status = TEST_FAILED;
+		goto error_exit;
+	}
+	asym_op = op->asym;
+	/* Setup a xform chain to generate public key
+	 * using test private key
+	 *
+	 */
+	xform.dh.type = RTE_CRYPTO_ASYM_OP_PUBLIC_KEY_GENERATE;
+	xform.next = NULL;
+
+	asym_op->dh.pub_key.data = output;
+	asym_op->dh.pub_key.length = sizeof(output);
+	/* load pre-defined private key */
+	asym_op->dh.priv_key.data = rte_malloc(NULL,
+					BN_num_bytes(testkey->priv_key),
+					0);
+	asym_op->dh.priv_key.length = BN_bn2bin(testkey->priv_key,
+					asym_op->dh.priv_key.data);
+
+	if (rte_cryptodev_asym_session_init(dev_id, sess, &xform,
+			sess_mpool) < 0) {
+		snprintf(test_msg, ASYM_TEST_MSG_LEN,
+				"line %u FAILED: %s",
+				__LINE__, "unabled to config sym session");
+		status = TEST_FAILED;
+		goto error_exit;
+	}
+
+	/* attach asymmetric crypto session to crypto operations */
+	rte_crypto_op_attach_asym_session(op, sess);
+
+	snprintf(test_msg, ASYM_TEST_MSG_LEN, "Process ASYM operation");
+
+	/* Process crypto operation */
+	if (rte_cryptodev_enqueue_burst(dev_id, 0, &op, 1) != 1) {
+		snprintf(test_msg, ASYM_TEST_MSG_LEN,
+			"line %u FAILED: %s",
+			__LINE__, "Error sending packet for operation");
+		status = TEST_FAILED;
+		goto error_exit;
+	}
+
+	while (rte_cryptodev_dequeue_burst(dev_id, 0, &result_op, 1) == 0)
+		rte_pause();
+
+	if (result_op == NULL) {
+		snprintf(test_msg, ASYM_TEST_MSG_LEN,
+			"line %u FAILED: %s",
+			__LINE__, "Failed to process asym crypto op");
+		status = TEST_FAILED;
+		goto error_exit;
+	}
+
+	debug_hexdump(stdout, "pub key:",
+			asym_op->dh.pub_key.data, asym_op->dh.pub_key.length);
+
+	BIGNUM *r = BN_new();
+	if (r != NULL) {
+		/* if priv key is same, then pub too should be same */
+		r = BN_bin2bn(asym_op->dh.pub_key.data,
+			      asym_op->dh.pub_key.length, r);
+		if (BN_cmp(testkey->pub_key, r))
+			status = TEST_FAILED;
+		BN_free(r);
+	}
+
+error_exit:
+	if (sess != NULL) {
+		rte_cryptodev_asym_session_clear(dev_id, sess);
+		rte_cryptodev_asym_session_free(sess);
+	}
+	if (op != NULL) {
+		if (asym_op->dh.priv_key.data != NULL)
+			rte_free(asym_op->dh.priv_key.data);
+		rte_crypto_op_free(op);
+
+	}
+	return status;
+}
+
+
+static int
+test_dh_gen_kp(DH *testkey, struct rte_crypto_asym_xform *xfrm)
+{
+	struct crypto_testsuite_params *ts_params = &testsuite_params;
+	struct rte_mempool *op_mpool = ts_params->op_mpool;
+	struct rte_mempool *sess_mpool = ts_params->session_mpool;
+	uint8_t dev_id = ts_params->valid_devs[0];
+	struct rte_crypto_asym_op *asym_op = NULL;
+	struct rte_crypto_op *op = NULL, *result_op = NULL;
+	struct rte_cryptodev_asym_session *sess = NULL;
+	int status = TEST_SUCCESS;
+	char test_msg[ASYM_TEST_MSG_LEN + 1];
+	uint8_t out_pub_key[TEST_DH_MOD_LEN];
+	uint8_t out_prv_key[TEST_DH_MOD_LEN];
+	struct rte_crypto_asym_xform pub_key_xform;
+	struct rte_crypto_asym_xform xform = *xfrm;
+
+	sess = rte_cryptodev_asym_session_create(sess_mpool);
+	if (sess == NULL) {
+		snprintf(test_msg,
+				 ASYM_TEST_MSG_LEN,
+				 "line %u FAILED: %s", __LINE__,
+				"Session creation failed");
+		status = TEST_FAILED;
+		goto error_exit;
+	}
+	/* set up crypto op data structure */
+	op = rte_crypto_op_alloc(op_mpool, RTE_CRYPTO_OP_TYPE_ASYMMETRIC);
+	if (!op) {
+		snprintf(test_msg, ASYM_TEST_MSG_LEN,
+			"line %u FAILED: %s",
+			__LINE__, "Failed to allocate asymmetric crypto "
+			"operation struct");
+		status = TEST_FAILED;
+		goto error_exit;
+	}
+	asym_op = op->asym;
+	/* Setup a xform chain to generate
+	 * private key first followed by
+	 * public key
+	 */
+	xform.dh.type = RTE_CRYPTO_ASYM_OP_PRIVATE_KEY_GENERATE;
+	pub_key_xform.xform_type = RTE_CRYPTO_ASYM_XFORM_DH;
+	pub_key_xform.dh.type = RTE_CRYPTO_ASYM_OP_PUBLIC_KEY_GENERATE;
+	xform.next = &pub_key_xform;
+
+	asym_op->dh.pub_key.data = out_pub_key;
+	asym_op->dh.pub_key.length = sizeof(out_pub_key);
+	asym_op->dh.priv_key.data = out_prv_key;
+	asym_op->dh.priv_key.length = sizeof(out_prv_key);
+	if (rte_cryptodev_asym_session_init(dev_id, sess, &xform,
+			sess_mpool) < 0) {
+		snprintf(test_msg, ASYM_TEST_MSG_LEN,
+				"line %u FAILED: %s",
+				__LINE__, "unabled to config sym session");
+		status = TEST_FAILED;
+		goto error_exit;
+	}
+
+	/* attach asymmetric crypto session to crypto operations */
+	rte_crypto_op_attach_asym_session(op, sess);
+
+	snprintf(test_msg, ASYM_TEST_MSG_LEN, "Process ASYM operation");
+
+	/* Process crypto operation */
+	if (rte_cryptodev_enqueue_burst(dev_id, 0, &op, 1) != 1) {
+		snprintf(test_msg, ASYM_TEST_MSG_LEN,
+			"line %u FAILED: %s",
+			__LINE__, "Error sending packet for operation");
+		status = TEST_FAILED;
+		goto error_exit;
+	}
+
+	while (rte_cryptodev_dequeue_burst(dev_id, 0, &result_op, 1) == 0)
+		rte_pause();
+
+	if (result_op == NULL) {
+		snprintf(test_msg, ASYM_TEST_MSG_LEN,
+			"line %u FAILED: %s",
+			__LINE__, "Failed to process asym crypto op");
+		status = TEST_FAILED;
+		goto error_exit;
+	}
+	debug_hexdump(stdout, "priv key:",
+			out_prv_key, asym_op->dh.priv_key.length);
+	debug_hexdump(stdout, "pub key:",
+			out_pub_key, asym_op->dh.pub_key.length);
+
+	BIGNUM *r = BN_new();
+	if (r != NULL) {
+		r = BN_bin2bn(asym_op->dh.priv_key.data,
+				   asym_op->dh.priv_key.length, r);
+
+		/* if priv key is same, then pub too should be same */
+		if (!BN_cmp(testkey->priv_key, r)) {
+			r = BN_bin2bn(asym_op->dh.pub_key.data,
+				      asym_op->dh.pub_key.length, r);
+			if (BN_cmp(testkey->pub_key, r))
+				status = TEST_FAILED;
+		}
+		BN_free(r);
+	}
+
+error_exit:
+	if (sess != NULL) {
+		rte_cryptodev_asym_session_clear(dev_id, sess);
+		rte_cryptodev_asym_session_free(sess);
+	}
+	if (op != NULL)
+		rte_crypto_op_free(op);
+
+	return status;
+}
+
+static int
+test_RSA_encryption(void)
+{
+	rsa_test_case.op_type = RTE_CRYPTO_ASYM_OP_ENCRYPT;
+	return test_rsa(&rsa_test_case);
+}
+
+static int
+test_RSA_decryption(void)
+{
+	rsa_test_case.op_type = RTE_CRYPTO_ASYM_OP_DECRYPT;
+	return test_rsa(&rsa_test_case);
+}
+
+static int
+test_RSA_sign(void)
+{
+	rsa_test_case.op_type = RTE_CRYPTO_ASYM_OP_SIGN;
+	return test_rsa(&rsa_test_case);
+}
+
+static int
+test_RSA_verify(void)
+{
+	int status;
+	rsa_test_case.op_type = RTE_CRYPTO_ASYM_OP_VERIFY;
+	status = test_rsa(&rsa_test_case);
+	TEST_ASSERT_EQUAL(status, 0, "Test failed");
+	return TEST_SUCCESS;
+}
+
+static int
+test_mod_inv(void)
+{
+	struct crypto_testsuite_params *ts_params = &testsuite_params;
+	struct rte_mempool *op_mpool = ts_params->op_mpool;
+	struct rte_mempool *sess_mpool = ts_params->session_mpool;
+	uint8_t dev_id = ts_params->valid_devs[0];
+	struct rte_crypto_asym_op *asym_op = NULL;
+	struct rte_crypto_op *op = NULL, *result_op = NULL;
+	struct rte_cryptodev_asym_session *sess = NULL;
+	int status = TEST_SUCCESS;
+	char test_msg[ASYM_TEST_MSG_LEN + 1];
+	struct rte_cryptodev_asym_capability_idx cap_idx;
+	const struct rte_cryptodev_asymmetric_xfrm_capability *capability;
+	BN_CTX *ctx = NULL;
+	uint8_t input[TEST_DATA_SIZE] = {0}, sw_res[TEST_DATA_SIZE] = {0};
+	uint8_t sw_res_len = 0;
+
+	if (rte_cryptodev_get_asym_xform_enum(
+		&modinv_xform.xform_type, "modinv") < 0) {
+		snprintf(test_msg,
+				 ASYM_TEST_MSG_LEN,
+				 "Invalid ASYNC algorithm specified\n");
+		return -1;
+	}
+
+	cap_idx.type = modinv_xform.xform_type;
+	capability = rte_cryptodev_asym_capability_get(dev_id,
+					&cap_idx);
+
+	if (rte_cryptodev_asym_xfrm_capability_check_modlen(
+		capability,
+		modinv_xform.modinv.modulus.length)) {
+		snprintf(test_msg,
+				 ASYM_TEST_MSG_LEN,
+				 "Invalid MODULOUS length specified\n");
+				return -1;
+		}
+
+	sess = rte_cryptodev_asym_session_create(sess_mpool);
+	if (!sess) {
+		snprintf(test_msg, ASYM_TEST_MSG_LEN, "line %u "
+				"FAILED: %s", __LINE__,
+				"Session creation failed");
+		status = TEST_FAILED;
+		goto error_exit;
+	}
+
+	if (rte_cryptodev_asym_session_init(dev_id, sess, &modinv_xform,
+			sess_mpool) < 0) {
+		snprintf(test_msg, ASYM_TEST_MSG_LEN,
+				"line %u FAILED: %s",
+				__LINE__, "unabled to config sym session");
+		status = TEST_FAILED;
+		goto error_exit;
+	}
+
+	/* generate crypto op data structure */
+	op = rte_crypto_op_alloc(op_mpool, RTE_CRYPTO_OP_TYPE_ASYMMETRIC);
+	if (!op) {
+		snprintf(test_msg,
+			ASYM_TEST_MSG_LEN,
+			"line %u FAILED: %s",
+			__LINE__, "Failed to allocate asymmetric crypto "
+			"operation struct");
+		status = TEST_FAILED;
+		goto error_exit;
+	}
+	asym_op = op->asym;
+	memcpy(input, base, sizeof(base));
+	asym_op->modinv.base.data = input;
+	asym_op->modinv.base.length = sizeof(base);
+
+	/* attach asymmetric crypto session to crypto operations */
+	rte_crypto_op_attach_asym_session(op, sess);
+
+	snprintf(test_msg, ASYM_TEST_MSG_LEN, "Process ASYM operation");
+	/* Process crypto operation */
+	if (rte_cryptodev_enqueue_burst(dev_id, 0, &op, 1) != 1) {
+		snprintf(test_msg, ASYM_TEST_MSG_LEN,
+			"line %u FAILED: %s",
+			__LINE__, "Error sending packet for operation");
+		status = TEST_FAILED;
+		goto error_exit;
+	}
+
+	while (rte_cryptodev_dequeue_burst(dev_id, 0, &result_op, 1) == 0)
+		rte_pause();
+	if (result_op == NULL) {
+		snprintf(test_msg, ASYM_TEST_MSG_LEN,
+				"line %u FAILED: %s",
+				__LINE__, "Failed to process asym crypto op");
+		status = TEST_FAILED;
+		goto error_exit;
+	}
+	snprintf(test_msg,
+			ASYM_TEST_MSG_LEN,
+			"Modinv :%s length:%lu\n",
+			asym_op->modinv.base.data,
+			asym_op->modinv.base.length);
+
+	/* cross verify output using sw lib */
+	ctx = BN_CTX_new();
+	if (ctx == NULL) {
+		snprintf(test_msg, ASYM_TEST_MSG_LEN,
+				"line %u FAILED: %s",
+				__LINE__, "Failed to allocate CTX");
+		status = TEST_FAILED;
+		goto error_exit;
+	}
+	BN_CTX_start(ctx);
+	BIGNUM *x = BN_CTX_get(ctx);
+	BIGNUM *m = BN_CTX_get(ctx);
+	BIGNUM *r = BN_CTX_get(ctx);
+
+	if (!x || !m || !r) {
+		snprintf(test_msg, ASYM_TEST_MSG_LEN,
+				"line %u FAILED: %s",
+				__LINE__, "Failed to allocate Bignum");
+		status = TEST_FAILED;
+		goto error_exit;
+	}
+
+	m = BN_bin2bn(
+		(const unsigned char *)modinv_xform.modinv.modulus.data,
+		modinv_xform.modinv.modulus.length, m);
+	x = BN_bin2bn((const unsigned char *)base, sizeof(base), x);
+	if (!BN_mod_inverse(r, x, m, ctx)) {
+		snprintf(test_msg, ASYM_TEST_MSG_LEN,
+				"line %u FAILED: %s",
+				__LINE__, "SW Mod Inv failed");
+		status = TEST_FAILED;
+		goto error_exit;
+	} else {
+		sw_res_len = BN_bn2bin(r, sw_res);
+		if (memcmp(sw_res, result_op->asym->modinv.base.data,
+					result_op->asym->modinv.base.length)) {
+			snprintf(test_msg, ASYM_TEST_MSG_LEN,
+					"resulted len[%lu]:expected len[%d]"
+					"FAILED: %s",
+					result_op->asym->modinv.base.length,
+					sw_res_len,
+					"SW validation fails");
+			status = TEST_FAILED;
+			goto error_exit;
+		}
+	}
+	snprintf(test_msg, ASYM_TEST_MSG_LEN, "PASS");
+
+error_exit:
+	if (ctx) {
+		BN_CTX_end(ctx);
+		BN_CTX_free(ctx);
+	}
+
+	if (sess) {
+		rte_cryptodev_asym_session_clear(dev_id, sess);
+		rte_cryptodev_asym_session_free(sess);
+	}
+
+	if (op)
+		rte_crypto_op_free(op);
+	return status;
+}
+
+static int
+test_mod_exp(void)
+{
+	struct crypto_testsuite_params *ts_params = &testsuite_params;
+	struct rte_mempool *op_mpool = ts_params->op_mpool;
+	struct rte_mempool *sess_mpool = ts_params->session_mpool;
+	uint8_t dev_id = ts_params->valid_devs[0];
+	struct rte_crypto_asym_op *asym_op = NULL;
+	struct rte_crypto_op *op = NULL, *result_op = NULL;
+	struct rte_cryptodev_asym_session *sess = NULL;
+	int status = TEST_SUCCESS;
+	char test_msg[ASYM_TEST_MSG_LEN + 1];
+	struct rte_cryptodev_asym_capability_idx cap_idx;
+	const struct rte_cryptodev_asymmetric_xfrm_capability *capability;
+	BN_CTX *ctx = NULL;
+	uint8_t input[TEST_DATA_SIZE] = {0}, sw_res[TEST_DATA_SIZE] = {0};
+	uint8_t sw_res_len = 0;
+
+	if (rte_cryptodev_get_asym_xform_enum(&modex_xform.xform_type,
+		"modexp")
+		< 0) {
+		snprintf(test_msg,
+				ASYM_TEST_MSG_LEN,
+				"Invalid ASYNC algorithm specified\n");
+		return -1;
+	}
+
+	/* check for modlen capability */
+	cap_idx.type = modex_xform.xform_type;
+	capability = rte_cryptodev_asym_capability_get(dev_id, &cap_idx);
+
+	if (rte_cryptodev_asym_xfrm_capability_check_modlen(
+			capability, modex_xform.modex.modulus.length)) {
+		snprintf(test_msg,
+				ASYM_TEST_MSG_LEN,
+				"Invalid MODULOUS length specified\n");
+				return -1;
+		}
+
+	/* generate crypto op data structure */
+	op = rte_crypto_op_alloc(op_mpool, RTE_CRYPTO_OP_TYPE_ASYMMETRIC);
+	if (!op) {
+		snprintf(test_msg,
+			ASYM_TEST_MSG_LEN,
+			"line %u FAILED: %s",
+			__LINE__, "Failed to allocate asymmetric crypto "
+			"operation struct");
+		status = TEST_FAILED;
+		goto error_exit;
+	}
+
+	sess = rte_cryptodev_asym_session_create(sess_mpool);
+	if (!sess) {
+		snprintf(test_msg,
+				 ASYM_TEST_MSG_LEN,
+				 "line %u "
+				"FAILED: %s", __LINE__,
+				"Session creation failed");
+		status = TEST_FAILED;
+		goto error_exit;
+	}
+
+	if (rte_cryptodev_asym_session_init(dev_id, sess, &modex_xform,
+			sess_mpool) < 0) {
+		snprintf(test_msg,
+				 ASYM_TEST_MSG_LEN,
+				"line %u FAILED: %s",
+				__LINE__, "unabled to config sym session");
+		status = TEST_FAILED;
+		goto error_exit;
+	}
+
+	asym_op = op->asym;
+	memcpy(input, base, sizeof(base));
+	asym_op->modex.base.data = input;
+	asym_op->modex.base.length = sizeof(base);
+	/* attach asymmetric crypto session to crypto operations */
+	rte_crypto_op_attach_asym_session(op, sess);
+
+	snprintf(test_msg, ASYM_TEST_MSG_LEN, "Process ASYM operation");
+	/* Process crypto operation */
+	if (rte_cryptodev_enqueue_burst(dev_id, 0, &op, 1) != 1) {
+		snprintf(test_msg,
+				 ASYM_TEST_MSG_LEN,
+				"line %u FAILED: %s",
+				__LINE__, "Error sending packet for operation");
+		status = TEST_FAILED;
+		goto error_exit;
+	}
+
+	while (rte_cryptodev_dequeue_burst(dev_id, 0, &result_op, 1) == 0)
+		rte_pause();
+
+	if (result_op == NULL) {
+		snprintf(test_msg,
+				 ASYM_TEST_MSG_LEN,
+				"line %u FAILED: %s",
+				__LINE__, "Failed to process asym crypto op");
+		status = TEST_FAILED;
+		goto error_exit;
+	}
+
+	/* cross verify output using sw lib */
+	ctx = BN_CTX_new();
+	if (ctx == NULL) {
+		snprintf(test_msg, ASYM_TEST_MSG_LEN,
+				"line %u FAILED: %s",
+				__LINE__, "Failed to allocate CTX");
+		status = TEST_FAILED;
+		goto error_exit;
+	}
+	BN_CTX_start(ctx);
+	BIGNUM *x = BN_CTX_get(ctx);
+	BIGNUM *m = BN_CTX_get(ctx);
+	BIGNUM *e = BN_CTX_get(ctx);
+	BIGNUM *r = BN_CTX_get(ctx);
+
+	if (!x || !m || !e || !r) {
+		snprintf(test_msg, ASYM_TEST_MSG_LEN,
+				"line %u FAILED: %s",
+				__LINE__, "Failed to allocate Bignum");
+		status = TEST_FAILED;
+		goto error_exit;
+	}
+
+	m = BN_bin2bn(
+			(const unsigned char *)modex_xform.modex.modulus.data,
+			modex_xform.modex.modulus.length, m);
+	e = BN_bin2bn(
+			(const unsigned char *)modex_xform.modex.exponent.data,
+			modex_xform.modex.exponent.length, e);
+	x = BN_bin2bn((const unsigned char *)base, sizeof(base), x);
+	if (!BN_mod_exp(r, x, e, m, ctx)) {
+		snprintf(test_msg, ASYM_TEST_MSG_LEN,
+				"line %u FAILED: %s",
+				__LINE__, "SW Mod Exp failed");
+		status = TEST_FAILED;
+		goto error_exit;
+	} else {
+		sw_res_len = BN_bn2bin(r, sw_res);
+		/* compare PMD result with sw result */
+		if (memcmp(sw_res,
+				result_op->asym->modex.base.data,
+				result_op->asym->modex.base.length)) {
+			snprintf(test_msg, ASYM_TEST_MSG_LEN,
+					"resulted len[%lu]:expected len[%d]"
+					" FAILED: %s",
+					result_op->asym->modinv.base.length,
+					sw_res_len,
+					"SW validation fails");
+			status = TEST_FAILED;
+			goto error_exit;
+		}
+	}
+	snprintf(test_msg, ASYM_TEST_MSG_LEN, "PASS");
+
+error_exit:
+	if (ctx != NULL) {
+		BN_CTX_end(ctx);
+		BN_CTX_free(ctx);
+	}
+
+	if (sess != NULL) {
+		rte_cryptodev_asym_session_clear(dev_id, sess);
+		rte_cryptodev_asym_session_free(sess);
+	}
+
+	if (op != NULL)
+		rte_crypto_op_free(op);
+
+	return status;
+}
+
+static int
+test_dh_keygenration(void)
+{
+	int status;
+	struct rte_crypto_asym_xform xform;
+	uint8_t p[TEST_DH_MOD_LEN];
+	uint8_t g[TEST_DH_MOD_LEN];
+
+	/* generate dh test params using openssl apis */
+	DH *key = NULL;
+	key = DH_new();
+	if (key == NULL ||
+	   (DH_generate_parameters_ex(key,
+					TEST_DH_MOD_LEN,
+					DH_GENERATOR_2, NULL) != 1)) {
+		RTE_LOG(ERR, USER1,
+			"Unable to generate test params\n");
+		status = TEST_FAILED;
+		return -1;
+	}
+
+	xform.dh.p.length = BN_bn2bin((const BIGNUM *)key->p, p);
+	xform.dh.g.length = BN_bn2bin((const BIGNUM *)key->g, g);
+
+	debug_hexdump(stdout, "p:", p, xform.dh.p.length);
+	debug_hexdump(stdout, "g:", g, xform.dh.g.length);
+
+	if (!DH_generate_key(key)) {
+		RTE_LOG(ERR, USER1,
+			"Unable to generate test params\n");
+		status = TEST_FAILED;
+		return -1;
+	}
+
+	/* load test params into dh xform */
+	xform.dh.p.data = p;
+	xform.dh.g.data = g;
+	xform.xform_type = RTE_CRYPTO_ASYM_XFORM_DH;
+
+	RTE_LOG(INFO, USER1,
+		"Test Public and Private key pair generation\n");
+
+	status = test_dh_gen_kp(key, &xform);
+	TEST_ASSERT_EQUAL(status, 0, "Test failed");
+
+	RTE_LOG(INFO, USER1,
+		"Test Public Key Generation using pre-defined priv key\n");
+
+	status = test_dh_gen_pub_key(key, &xform);
+	TEST_ASSERT_EQUAL(status, 0, "Test failed");
+
+	RTE_LOG(INFO, USER1,
+		"Test Private Key Generation only\n");
+
+	status = test_dh_gen_priv_key(key, &xform);
+	TEST_ASSERT_EQUAL(status, 0, "Test failed");
+
+	RTE_LOG(INFO, USER1,
+		"Test shared secret compute\n");
+
+	status = test_dh_gen_shared_sec(key, &xform);
+	TEST_ASSERT_EQUAL(status, 0, "Test failed");
+
+	DH_free(key);
+	return status;
+}
+
+static int
+test_dsa_sign(DSA *testdsa, uint8_t *message, size_t msg_len)
+{
+	struct crypto_testsuite_params *ts_params = &testsuite_params;
+	struct rte_mempool *op_mpool = ts_params->op_mpool;
+	struct rte_mempool *sess_mpool = ts_params->session_mpool;
+	uint8_t dev_id = ts_params->valid_devs[0];
+	struct rte_crypto_asym_op *asym_op = NULL;
+	struct rte_crypto_op *op = NULL, *result_op = NULL;
+	struct rte_cryptodev_asym_session *sess = NULL;
+	int status = TEST_SUCCESS;
+	char test_msg[ASYM_TEST_MSG_LEN + 1];
+	uint8_t r[TEST_DH_MOD_LEN];
+	uint8_t s[TEST_DH_MOD_LEN];
+	struct rte_crypto_asym_xform xform;
+
+	sess = rte_cryptodev_asym_session_create(sess_mpool);
+	if (sess == NULL) {
+		snprintf(test_msg,
+				 ASYM_TEST_MSG_LEN,
+				 "line %u FAILED: %s", __LINE__,
+				"Session creation failed");
+		status = TEST_FAILED;
+		goto error_exit;
+	}
+	/* set up crypto op data structure */
+	op = rte_crypto_op_alloc(op_mpool, RTE_CRYPTO_OP_TYPE_ASYMMETRIC);
+	if (!op) {
+		snprintf(test_msg, ASYM_TEST_MSG_LEN,
+			"line %u FAILED: %s",
+			__LINE__, "Failed to allocate asymmetric crypto "
+			"operation struct");
+		status = TEST_FAILED;
+		goto error_exit;
+	}
+	asym_op = op->asym;
+
+	/* Setup a xform for DSA */
+	xform.xform_type = RTE_CRYPTO_ASYM_XFORM_DSA;
+	xform.next = NULL;
+	xform.dsa.x.data = rte_malloc(NULL,
+				      BN_num_bytes(testdsa->priv_key),
+				      0);
+	xform.dsa.p.data = rte_malloc(NULL,
+				      BN_num_bytes(testdsa->p),
+				      0);
+	xform.dsa.q.data = rte_malloc(NULL,
+				      BN_num_bytes(testdsa->q),
+				      0);
+	xform.dsa.g.data = rte_malloc(NULL,
+				      BN_num_bytes(testdsa->g),
+				      0);
+
+	/* copy test params to xform params */
+	xform.dsa.x.length = BN_bn2bin(testdsa->priv_key,
+				       xform.dsa.x.data);
+	xform.dsa.p.length = BN_bn2bin(testdsa->p,
+				       xform.dsa.p.data);
+	xform.dsa.q.length = BN_bn2bin(testdsa->q,
+				       xform.dsa.q.data);
+	xform.dsa.g.length = BN_bn2bin(testdsa->g,
+				       xform.dsa.g.data);
+
+	if (rte_cryptodev_asym_session_init(dev_id, sess, &xform,
+			sess_mpool) < 0) {
+		snprintf(test_msg, ASYM_TEST_MSG_LEN,
+				"line %u FAILED: %s",
+				__LINE__, "unabled to config sym session");
+		status = TEST_FAILED;
+		goto error_exit;
+	}
+
+	/* attach asymmetric crypto session to crypto operations */
+	rte_crypto_op_attach_asym_session(op, sess);
+	asym_op->dsa.op_type = RTE_CRYPTO_ASYM_OP_SIGN;
+	asym_op->dsa.message.data = message;
+	asym_op->dsa.message.length = msg_len;
+	asym_op->dsa.r.length = sizeof(r);
+	asym_op->dsa.r.data = r;
+	asym_op->dsa.s.length = sizeof(s);
+	asym_op->dsa.s.data = s;
+
+	snprintf(test_msg, ASYM_TEST_MSG_LEN, "Process ASYM operation");
+
+	/* Process crypto operation */
+	if (rte_cryptodev_enqueue_burst(dev_id, 0, &op, 1) != 1) {
+		snprintf(test_msg, ASYM_TEST_MSG_LEN,
+			"line %u FAILED: %s",
+			__LINE__, "Error sending packet for operation");
+		status = TEST_FAILED;
+		goto error_exit;
+	}
+
+	while (rte_cryptodev_dequeue_burst(dev_id, 0, &result_op, 1) == 0)
+		rte_pause();
+
+	if (result_op == NULL) {
+		snprintf(test_msg, ASYM_TEST_MSG_LEN,
+			"line %u FAILED: %s",
+			__LINE__, "Failed to process asym crypto op");
+		status = TEST_FAILED;
+		goto error_exit;
+	}
+
+	asym_op = result_op->asym;
+
+	debug_hexdump(stdout, "r:",
+			asym_op->dsa.r.data, asym_op->dsa.r.length);
+	debug_hexdump(stdout, "s:",
+			asym_op->dsa.s.data, asym_op->dsa.s.length);
+
+	/* verify using sw */
+	DSA_SIG *sig = DSA_SIG_new();
+	if (!sig) {
+		snprintf(test_msg, ASYM_TEST_MSG_LEN,
+			"line %u FAILED: %s",
+			__LINE__, "Failed to allocate sw DSA sign");
+		status = TEST_FAILED;
+		goto error_exit;
+	}
+	sig->r = BN_bin2bn(asym_op->dsa.r.data, asym_op->dsa.r.length,
+			   sig->r);
+	sig->s = BN_bin2bn(asym_op->dsa.s.data, asym_op->dsa.s.length,
+			   sig->s);
+	if (!DSA_do_verify(message, msg_len, sig, testdsa)) {
+		status = TEST_FAILED;
+		snprintf(test_msg, ASYM_TEST_MSG_LEN,
+			" sign compute cross verification failed\n");
+		DSA_SIG_free(sig);
+		goto error_exit;
+	}
+	DSA_SIG_free(sig);
+
+	/* Test PMD DSA sign verification using signer public key */
+	asym_op->dsa.op_type = RTE_CRYPTO_ASYM_OP_VERIFY;
+
+	/* copy signer public key */
+	asym_op->dsa.y.data = rte_malloc(NULL,
+				      BN_num_bytes(testdsa->pub_key),
+				      0);
+	asym_op->dsa.y.length = BN_bn2bin(testdsa->pub_key,
+					  asym_op->dsa.y.data);
+
+	/* Process crypto operation */
+	if (rte_cryptodev_enqueue_burst(dev_id, 0, &op, 1) != 1) {
+		snprintf(test_msg, ASYM_TEST_MSG_LEN,
+			"line %u FAILED: %s",
+			__LINE__, "Error sending packet for operation");
+		status = TEST_FAILED;
+		goto error_exit;
+	}
+
+	while (rte_cryptodev_dequeue_burst(dev_id, 0, &result_op, 1) == 0)
+		rte_pause();
+
+	if (result_op == NULL) {
+		snprintf(test_msg, ASYM_TEST_MSG_LEN,
+			"line %u FAILED: %s",
+			__LINE__, "Failed to process asym crypto op");
+		status = TEST_FAILED;
+		goto error_exit;
+	}
+
+	if (result_op->status != RTE_CRYPTO_OP_STATUS_SUCCESS) {
+		snprintf(test_msg, ASYM_TEST_MSG_LEN,
+			"line %u FAILED: %s",
+			__LINE__, "Failed to process asym crypto op");
+		status = TEST_FAILED;
+	}
+
+error_exit:
+	if (sess != NULL) {
+		rte_cryptodev_asym_session_clear(dev_id, sess);
+		rte_cryptodev_asym_session_free(sess);
+	}
+	if (op != NULL) {
+		if (xform.dsa.x.data)
+			rte_free(xform.dsa.x.data);
+		if (xform.dsa.p.data)
+			rte_free(xform.dsa.p.data);
+		if (xform.dsa.q.data)
+			rte_free(xform.dsa.q.data);
+		if (xform.dsa.g.data)
+			rte_free(xform.dsa.g.data);
+		rte_crypto_op_free(op);
+	}
+	return status;
+}
+
+static int
+test_dsa(void)
+{
+	int status;
+	DSA *dsa = DSA_new();
+	uint8_t dgst[] = "01234567890123456789";
+	/* generate test params */
+	if (dsa == NULL || !DSA_generate_parameters_ex(dsa, TEST_DH_MOD_LEN,
+		NULL, 0, NULL, NULL, NULL)) {
+		RTE_LOG(ERR, USER1,
+			" failed to generate test params\n");
+		return TEST_FAILED;
+	}
+	if (!DSA_generate_key(dsa)) {
+		RTE_LOG(ERR, USER1,
+			" failed to generate test params\n");
+		return TEST_FAILED;
+	}
+
+	/* test DSA sign using generated private key */
+	status = test_dsa_sign(dsa, dgst, sizeof(dgst));
+	TEST_ASSERT_EQUAL(status, 0, "Test failed");
+
+	DSA_free(dsa);
+	return status;
+}
+
+
+static struct unit_test_suite cryptodev_openssl_asym_testsuite  = {
+	.suite_name = "Crypto Device OPENSSL ASYM Unit Test Suite",
+	.setup = testsuite_setup,
+	.teardown = testsuite_teardown,
+	.unit_test_cases = {
+		TEST_CASE_ST(ut_setup, ut_teardown, test_capability),
+		TEST_CASE_ST(ut_setup, ut_teardown, test_dsa),
+		TEST_CASE_ST(ut_setup, ut_teardown, test_dh_keygenration),
+		TEST_CASE_ST(ut_setup, ut_teardown, test_RSA_encryption),
+		TEST_CASE_ST(ut_setup, ut_teardown, test_RSA_decryption),
+		TEST_CASE_ST(ut_setup, ut_teardown, test_RSA_sign),
+		TEST_CASE_ST(ut_setup, ut_teardown, test_RSA_verify),
+		TEST_CASE_ST(ut_setup, ut_teardown, test_mod_inv),
+		TEST_CASE_ST(ut_setup, ut_teardown, test_mod_exp),
+		TEST_CASES_END() /**< NULL terminate unit test array */
+	}
+};
+
+static int
+test_cryptodev_openssl_asym(void)
+{
+	gbl_driver_id = rte_cryptodev_driver_id_get(
+			RTE_STR(CRYPTODEV_NAME_OPENSSL_PMD));
+
+	if (gbl_driver_id == -1) {
+		RTE_LOG(ERR, USER1, "OPENSSL PMD must be loaded. Check if "
+				"CONFIG_RTE_LIBRTE_PMD_OPENSSL is enabled "
+				"in config file to run this testsuite.\n");
+		return TEST_FAILED;
+	}
+
+	return unit_test_suite_runner(&cryptodev_openssl_asym_testsuite);
+}
+
+REGISTER_TEST_COMMAND(cryptodev_openssl_asym_autotest,
+					  test_cryptodev_openssl_asym);
