diff --git a/doc/guides/nics/features/mrvl.ini b/doc/guides/nics/features/mrvl.ini
index 3643b8b..00d9621 100644
--- a/doc/guides/nics/features/mrvl.ini
+++ b/doc/guides/nics/features/mrvl.ini
@@ -19,3 +19,5 @@ L3 checksum offload  = Y
 L4 checksum offload  = Y
 Packet type parsing  = Y
 Basic stats          = Y
+ARMv8                = Y
+Usage doc            = Y
diff --git a/doc/guides/nics/index.rst b/doc/guides/nics/index.rst
index 4115141..df19ec7 100644
--- a/doc/guides/nics/index.rst
+++ b/doc/guides/nics/index.rst
@@ -56,6 +56,7 @@ Network Interface Controller Drivers
     liquidio
     mlx4
     mlx5
+    mrvl
     nfp
     qede
     sfc_efx
diff --git a/doc/guides/nics/mrvl.rst b/doc/guides/nics/mrvl.rst
new file mode 100644
index 0000000..462bc0e
--- /dev/null
+++ b/doc/guides/nics/mrvl.rst
@@ -0,0 +1,256 @@
+..  BSD LICENSE
+    Copyright(c) 2017 Semihalf. All rights reserved.
+    All rights reserved.
+
+    Redistribution and use in source and binary forms, with or without
+    modification, are permitted provided that the following conditions
+    are met:
+
+      * Redistributions of source code must retain the above copyright
+        notice, this list of conditions and the following disclaimer.
+      * Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in
+        the documentation and/or other materials provided with the
+        distribution.
+      * Neither the name of Semihalf nor the names of its
+        contributors may be used to endorse or promote products derived
+        from this software without specific prior written permission.
+
+    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+    "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+    LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+    A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+    OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+    SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+    LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+    DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+    THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+    (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+    OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+MRVL Poll Mode Driver
+======================
+
+The MRVL PMD (librte_pmd_mrvl) provides poll mode driver support
+for the Marvell PPv2 (Packet Processor v2) 1/10 Gbps adapter.
+
+Detailed information about SoCs that use PPv2 can be obtained here:
+
+* https://www.marvell.com/embedded-processors/armada-70xx/
+* https://www.marvell.com/embedded-processors/armada-80xx/
+
+.. Note::
+
+   Due to external dependencies, this driver is disabled by default. It must
+   be enabled manually by setting relevant configuration option manually.
+   Please refer to `Config File Options`_ section for further details.
+
+
+Features
+--------
+
+Features of the MRVL PMD are:
+
+- Speed capabilities
+- Link status
+- Queue start/stop
+- MTU update
+- Jumbo frame
+- Promiscuous mode
+- Allmulticast mode
+- Unicast MAC filter
+- Multicast MAC filter
+- RSS hash
+- VLAN filter
+- CRC offload
+- L3 checksum offload
+- L4 checksum offload
+- Packet type parsing
+- Basic stats
+- QoS
+
+
+Limitations
+-----------
+
+- Number of lcores is limited to 9 by MUSDK internal design. If more lcores
+  need to be allocated, locking will have to be considered. Number of available
+  lcores can be changed via ``MRVL_MUSDK_HIFS_RESERVED`` define in
+  ``mrvl_ethdev.c`` source file.
+
+- Flushing vlans added for filtering is not possible due to MUSDK missing
+  functionality. Current workaround is to reset board so that PPv2 has a
+  chance to start in a sane state.
+
+
+Prerequisites
+-------------
+
+- Custom Linux Kernel sources available
+  `here <https://github.com/MarvellEmbeddedProcessors/linux-marvell/tree/linux-4.4.52-armada-17.08>`__.
+
+- Out of tree `mvpp2x_sysfs` kernel module sources available
+  `here <https://github.com/MarvellEmbeddedProcessors/mvpp2x-marvell/tree/mvpp2x-armada-17.08>`__.
+
+- MUSDK (Marvell User-Space SDK) sources available
+  `here <https://github.com/MarvellEmbeddedProcessors/musdk-marvell/tree/musdk-armada-17.08>`__.
+
+    MUSDK is a light-weight library that provides direct access to Marvell's
+    PPv2 (Packet Processor v2). Alternatively prebuilt MUSDK library can be
+    requested from `Marvell Extranet <https://extranet.marvell.com>`_. Once
+    approval has been granted, library can be found by typing ``musdk`` in
+    the search box.
+
+    MUSDK must be configured with the following features:
+
+    .. code-block:: console
+
+       --enable-bpool-dma=64
+
+- DPDK environment
+
+    Follow the DPDK :ref:`Getting Started Guide for Linux <linux_gsg>` to setup
+    DPDK environment.
+
+
+Config File Options
+-------------------
+
+The following options can be modified in the ``config`` file.
+
+- ``CONFIG_RTE_LIBRTE_MRVL_PMD`` (default ``n``)
+
+    Toggle compilation of the librte_pmd_mrvl driver.
+
+- ``CONFIG_RTE_LIBRTE_MRVL_DEBUG`` (default ``n``)
+
+    Toggle display of debugging messages.
+
+- ``CONFIG_RTE_MRVL_MUSDK_DMA_MEMSIZE`` (default ``41943040``)
+
+    Size in bytes of the contiguous memory region that MUSDK will allocate
+    for run-time DMA-able data buffers.
+
+
+QoS Configuration
+-----------------
+
+QoS configuration is done through external configuration file. Path to the
+file must be given as `cfg` in driver's vdev parameter list.
+
+Configuration syntax
+~~~~~~~~~~~~~~~~~~~~
+
+.. code-block:: console
+
+   [port <portnum> default]
+   default_tc = <default_tc>
+   qos_mode = <qos_priority>
+
+   [port <portnum> tc <traffic_class>]
+   rxq = <rx_queue_list>
+   pcp = <pcp_list>
+   dscp = <dscp_list>
+
+   [port <portnum> tc <traffic_class>]
+   rxq = <rx_queue_list>
+   pcp = <pcp_list>
+   dscp = <dscp_list>
+
+Where:
+
+- ``<portnum>``: DPDK Port number (0..n).
+
+- ``<default_tc>``: Default traffic class (e.g. 0)
+
+- ``<qos_priority>``: QoS priority for mapping (`ip`, `vlan`, `ip/vlan` or `vlan/ip`).
+
+- ``<traffic_class>``: Traffic Class to be configured.
+
+- ``<rx_queue_list>``: List of DPDK RX queues (e.g. 0 1 3-4)
+
+- ``<pcp_list>``: List of PCP values to handle in particular TC (e.g. 0 1 3-4 7).
+
+- ``<dscp_list>``: List of DSCP values to handle in particular TC (e.g. 0-12 32-48 63).
+
+Setting PCP/DSCP values for the default TC is not required. All PCP/DSCP
+values not assigned explicitly to particular TC will be handled by the
+default TC.
+
+Configuration file example
+^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+.. code-block:: console
+
+   [port 0 default]
+   default_tc = 0
+   qos_mode = ip
+
+   [port 0 tc 0]
+   rxq = 0 1
+
+   [port 0 tc 1]
+   rxq = 2
+   pcp = 5 6 7
+   dscp = 26-38
+
+   [port 1 default]
+   default_tc = 0
+   qos_mode = vlan/ip
+
+   [port 1 tc 0]
+   rxq = 0
+
+   [port 1 tc 1]
+   rxq = 1 2
+   pcp = 5 6 7
+   dscp = 26-38
+
+Usage example
+^^^^^^^^^^^^^
+
+.. code-block:: console
+
+   ./testpmd --vdev=eth_mrvl,iface=eth0,iface=eth2,cfg=/home/user/mrvl.conf \
+     -c 7 -- -i -a --disable-hw-vlan-strip --rxq=2
+
+
+Building DPDK
+-------------
+
+Driver needs precompiled MUSDK library during compilation. Please consult
+``doc/musdk_get_started.txt`` for the detailed build instructions.
+
+Before the DPDK build process the environmental variable ``LIBMUSDK_PATH`` with
+the path to the MUSDK installation directory needs to be exported.
+
+
+Usage Example
+-------------
+
+MRVL PMD requires extra out of tree kernel modules to function properly.
+`musdk_uio` and `mv_pp_uio` sources are part of the MUSDK. Please consult
+``doc/musdk_get_started.txt`` for the detailed build instructions.
+For `mvpp2x_sysfs` please consult ``Documentation/pp22_sysfs.txt`` for the
+detailed build instructions.
+
+.. code-block:: console
+
+   insmod musdk_uio.ko
+   insmod mv_pp_uio.ko
+   insmod mvpp2x_sysfs.ko
+
+Additionally interfaces used by DPDK application need to be put up:
+
+.. code-block:: console
+
+   ip link set eth0 up
+   ip link set eth1 up
+
+In order to run testpmd example application following command can be used:
+
+.. code-block:: console
+
+   ./testpmd --vdev=eth_mrvl,iface=eth0,iface=eth2 -c 7 -- \
+     --burst=128 --txd=2048 --rxd=1024 --rxq=2 --txq=2  --nb-cores=2 \
+     -i -a --disable-hw-vlan-strip --rss-udp
